Screw-Hole-Related Tools（Screw size (Nominal)：M22）

• You can add up to 6 items per a category to the compare list. Compare

  

  Model A Tap Series, Spiral Tap A-SFT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 2.5	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	Other	Available	115

  From: ₹ 20,368.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps_HT

  YAMAWA MFG

  Hand tap used for general tapping work.
  [Features]
  ・ High blade tip strength makes it easy for regrinding.
  ・ More suitable for manual work compared to taps of other shapes.
  ・ 2 types are available, with 5P or 1.5P chamfered threads.
  ・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
  ・ Machining with mechanical machinery is also possible.
  ・ Has straight grooves out of consideration for cutting chip stow.
  ・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
  [Applications]
  ・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 2.5	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	115

  From: ₹ 6,853.65
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.5 ～ 2.5	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	150

  From: ₹ 18,212.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Model A Tap Series, Pointed Tap A-POT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	1 ～ 2.5	Powder high-speed steel	Point tap	For through hole	5P	Other	Available	115

  From: ₹ 19,908.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Taps for Light Alloys_N-CT-FC

  YAMAWA MFG

  A carbide tap suitable for thread machining of hard and brittle material such as cast iron.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]	1.5 ～ 2.5	Carbide	Hand Tap	For through hole / For blind hole	1.5P ～ 3P	-	NA	95 ～ 115

  From: ₹ 47,636.85
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Threading Round Die Series Pipe General Threading Round Die RD-H

  OSG

  [Specifications]
  · Shape: Die
  · Coating: Non-Coated
  · Tool material: HSS

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	-	1.5 ～ 2.5	High-speed steel	Die	-	-	Non-Coated	NA	-

  From: ₹ 22,196.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Tap for General Use HT

  OSG

  High-speed steel hand tap.
  Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	2	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	Non-Coated	NA	115

  From: ₹ 8,593.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Threading Round Die Series Pipe General Threading Round Die RD-S

  OSG

  [Specifications]
  · Shape: Die
  · Coating: Non-Coated
  · Tool material: Alloy HSS (SKS)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	-	0.75 ～ 2.5	Alloy HSS	Die	-	-	Non-Coated	NA	-

  From: ₹ 8,450.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless Tap (X Performer)_S-XPF

  OSG

  There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
  * M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.5 ～ 2.5	Powder high-speed steel	Roll tap	For through hole / For blind hole	2P	TiCN	Available	125 ～ 140

  From: ₹ 21,713.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap Series TiN Coating TIN-POT

  OSG

  Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.5 ～ 2.5	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	115

  From: ₹ 12,186.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Tap with Long Shank_A-LT-POT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	1 ～ 2.5	Powder high-speed steel	Point tap	For through hole	5P	Other	Available	150

  From: ₹ 12,708.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Straight Flutes Tap_CPM-HT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	1.5 ～ 2.5	Powder high-speed steel	Hand Tap	For through hole / For blind hole	2P ～ 5P	Non-Coated	NA	115

  From: ₹ 11,491.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Stainless Steels_SU+PO

  YAMAWA MFG

  Point tap for through-hole machining with extremely viscous or work-hardened work material.
  [Features]
  Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 10 m/min or less is recommended.
  [Applications]
  · Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	1.5 ～ 2.5	High-speed steel	Point tap	For through hole	5P	-	NA	115

  From: ₹ 10,606.64
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Fluted Taps_LS-SP

  YAMAWA MFG

  * LS-N-SP will switch to LS-SP as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	150 ～ 200

  From: ₹ 10,847.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid Die D for Metric Threads

  YAMAWA MFG

  Solid die with improved die runout precision.
  [Features]
  · High-speed tool steel (HSS) is adopted, realizing stable machining.
  · The front surface is the surface with a marking on the chamfering.
  · The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
  · Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
  · Solves problems particular to adjustable type dies, realizing high precision screw machining.
  [Applications]
  · Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
  · Combining with NC tooling enables machining with a MC.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	-	0.5 ～ 2.5	High-speed steel	Die	-	-	-	NA	-

  From: ₹ 9,461.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap remover Plus (regular size)

  EIKOSHA

  Repair/removal tool: Drill for removing broken HSS taps.
  [Features]
  · A recovery drill that sharpens the center of a broken HSS tap.
  · As it does not damage the screw threads, re-tapping can be performed after removal.
  [Applications]
  · Used as a recovery tool when HSS taps are broken.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	-	-	-	Carbide	Modification/removal Tool	-	-	Other	Available	110

  From: ₹ 72,695.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap Short Chamfer type_EX-SC-SFT

  OSG

  Bite length of 1.5 peaks. Ideal for when the effective thread length cannot be obtained in a blind hole with general spiral taps of 2.5-thread biting length

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	1.5 ～ 2.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	1.5P	Non-Coated	NA	115

  From: ₹ 8,362.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for Stainless Steels_SU+SP

  YAMAWA MFG

  Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
  [Features]
  · For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
  · Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
  · Stable scrap is ejected and a good finish is realized.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 10 m/min or less is recommended.
  [Applications]
  Optimal for machining extremely viscous or work-hardened work material.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	1.5 ～ 2.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	115

  From: ₹ 8,906.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Spiral Tap SGSP

  NACHI(FUJIKOSHI)

  [Features]
  ·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditions

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	2.5	Alloy HSS	Spiral Tap	For through hole / For blind hole	2.5	TiCN	Available	115

  From: ₹ 13,863.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap TiN coated_TIN-HT

  OSG

  Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2.5	Vanadium High-Speed Steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	TiN	Available	115

  From: ₹ 11,316.89
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for General Application (with OX)_EX-H-POT

  OSG

  For standard point taps, it is used when the protruding length of the screw is insufficient.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.5 ～ 2.5	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	115

  From: ₹ 8,130.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Flute Tap (SKH)

  SKC

  [Applications]
  Can be used for tapping screw holes in stainless steel.
  [Features]
  This spiral flute tap can discharge chips with a coiled groove.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2.5	-	Spiral Tap	-	-	-	-	-

  From: ₹ 11,098.18
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  Spiral Fluted Taps for Aluminum_AL+SP

  YAMAWA MFG

  A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
  [Features]
  · Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
  · Stable, clean thread machining can be performed.
  [Applications]
  · Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
  · Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	2.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	125

  From: ₹ 17,957.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Spiral Fluted Taps, Deep Hole Use_S-SP

  YAMAWA MFG

  Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	1.5 ～ 2.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	115

  From: ₹ 8,517.18
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for Tough Stainless Steels_SU2-SP

  YAMAWA MFG

  Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	1.5 ～ 2.5	High-speed steel	Spiral Tap	For blind hole	3P	-	NA	115

  From: ₹ 12,673.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap with Long Shank_A-LT-SFT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 2.5	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	Other	Available	150

  From: ₹ 13,229.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Point Tap SGPO

  NACHI(FUJIKOSHI)

  [Features]
  ・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.
  

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	2.5	High-speed steel	Point tap	For through hole	5	TiCN	Available	115

  From: ₹ 13,570.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Speed Tapping_LS-F-SP

  YAMAWA MFG

  [Features]
  · A long-shank spiral tap for use in high-speed machining between 15 m/min and 25 m/min.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	1.5 ～ 2.5	High-speed steel	Spiral Tap	For blind hole	3P	-	Available	150

  From: ₹ 21,987.89
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap TiN coated with Long Shank_TIN-LT-POT

  OSG

  Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.5 ～ 2.5	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	200

  From: ₹ 17,865.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for High Carbon Steels_HC+SP

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	115

  From: ₹ 10,123.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps for High Carbon Steels_HC+PO

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	2.5	High-speed steel	Point tap	For through hole	5P	-	NA	115

  From: ₹ 10,123.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Spiral Pointed Taps for Deep Hole Use_S-PO

  YAMAWA MFG

  A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Short thread length gives low frictional resistance.
  · Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	1.5 ～ 2.5	High-speed steel	Point tap	For through hole	5P	-	NA	115

  From: ₹ 11,143.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Soft Structural Steels_E-SP

  YAMAWA MFG

  A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○]	1.5 ～ 2.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	115

  From: ₹ 10,632.07
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

  YAMAWA MFG

  Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○]	1.5 ～ 2.5	Cobalt HSS	Point tap	For through hole	4.5P	-	NA	115

  From: ₹ 14,129.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Short Spiral Pointed Taps for Stainless Steels_LS-SU-S-PO

  YAMAWA MFG

  [Features]
  · A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
  · Can also be used for deep tapping operations.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○]	1.5 ～ 2.5	High-speed steel	Point tap	For through hole	5P	Other	Available	200

  From: ₹ 18,611.27
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	YAMAWA MFG	OSG	OSG	YAMAWA MFG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	EIKOSHA	OSG	YAMAWA MFG	NACHI(FUJIKOSHI)	OSG	OSG	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	NACHI(FUJIKOSHI)	YAMAWA MFG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Model A Tap Series, Spiral Tap A-SFT	Hand Taps_HT	LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT	Model A Tap Series, Pointed Tap A-POT	Carbide Taps for Light Alloys_N-CT-FC	Threading Round Die Series Pipe General Threading Round Die RD-H	Hand Tap for General Use HT	Threading Round Die Series Pipe General Threading Round Die RD-S	Fluteless Tap (X Performer)_S-XPF	Pointed Tap Series TiN Coating TIN-POT	Spiral Pointed Tap with Long Shank_A-LT-POT	CPM Straight Flutes Tap_CPM-HT	Spiral Pointed Taps for Stainless Steels_SU+PO	Long Shank Spiral Fluted Taps_LS-SP	Solid Die D for Metric Threads	Tap remover Plus (regular size)	Spiral Tap Short Chamfer type_EX-SC-SFT	Spiral Fluted Taps for Stainless Steels_SU+SP	SG Spiral Tap SGSP	Straight Flutes Tap TiN coated_TIN-HT	Pointed Tap for General Application (with OX)_EX-H-POT	Spiral Flute Tap (SKH)	Spiral Fluted Taps for Aluminum_AL+SP	Short Spiral Fluted Taps, Deep Hole Use_S-SP	Spiral Fluted Taps for Tough Stainless Steels_SU2-SP	Spiral Tap with Long Shank_A-LT-SFT	SG Point Tap SGPO	Spiral Fluted Taps for High Speed Tapping_LS-F-SP	Pointed Tap TiN coated with Long Shank_TIN-LT-POT	Spiral Fluted Taps for High Carbon Steels_HC+SP	Spiral Pointed Taps for High Carbon Steels_HC+PO	Short Spiral Pointed Taps for Deep Hole Use_S-PO	Spiral Fluted Taps for Soft Structural Steels_E-SP	Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO	Long Shank Short Spiral Pointed Taps for Stainless Steels_LS-SU-S-PO
From	₹ 20,368.00	₹ 6,853.65	₹ 18,212.09	₹ 19,908.00	₹ 47,636.85	₹ 22,196.78	₹ 8,593.91	₹ 8,450.58	₹ 21,713.27	₹ 12,186.16	₹ 12,708.53	₹ 11,491.02	₹ 10,606.64	₹ 10,847.73	₹ 9,461.45	₹ 72,695.65	₹ 8,362.18	₹ 8,906.95	₹ 13,863.84	₹ 11,316.89	₹ 8,130.47	₹ 11,098.18	₹ 17,957.22	₹ 8,517.18	₹ 12,673.31	₹ 13,229.55	₹ 13,570.51	₹ 21,987.89	₹ 17,865.18	₹ 10,123.11	₹ 10,123.11	₹ 11,143.73	₹ 10,632.07	₹ 14,129.24	₹ 18,611.27
Days to Ship	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Screw size (Nominal)	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22	M22
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○]
Pitch (P), Number of Threading(mm)	1 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	2	0.75 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	0.5 ～ 2.5	-	1.5 ～ 2.5	1.5 ～ 2.5	2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	2.5	1.5 ～ 2.5	1.5 ～ 2.5	1 ～ 2.5	2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5
Tool Material Type	Powder high-speed steel	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Carbide	High-speed steel	High-speed steel	Alloy HSS	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Vanadium High-Speed Steel	High-speed steel	Alloy HSS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-	High-speed steel	High-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel
Tap Type	Spiral Tap	Hand Tap	Point tap	Point tap	Hand Tap	Die	Hand Tap	Die	Roll tap	Point tap	Point tap	Hand Tap	Point tap	Spiral Tap	Die	Modification/removal Tool	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Point tap	Spiral Tap	Point tap	Point tap	Spiral Tap	Point tap	Point tap
Hole type	For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	-	For through hole / For blind hole	-	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole	For blind hole	-	-	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	-	For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For blind hole	For through hole	For blind hole	For through hole	For through hole	For blind hole	For through hole	For through hole
Chamfer threads (Lcf)	2.5P	1.5P ～ 5P	6P	5P	1.5P ～ 3P	-	1.5P ～ 5P	-	2P	5P	5P	2P ～ 5P	5P	2.5P	-	-	1.5P	2.5P	2.5	1.5P ～ 5P	5P	-	2.5P	2.5P	3P	2.5P	5	3P	5P	2.5P	5P	5P	2.5P	4.5P	5P
Coating Type	Other	-	TiN	Other	-	Non-Coated	Non-Coated	Non-Coated	TiCN	TiN	Other	Non-Coated	-	-	-	Other	Non-Coated	-	TiCN	TiN	Non-Coated	-	-	-	-	Other	TiCN	-	TiN	-	-	-	-	-	Other
Coating Y/N	Available	NA	Available	Available	NA	NA	NA	NA	Available	Available	Available	NA	NA	NA	NA	Available	NA	NA	Available	Available	NA	-	NA	NA	NA	Available	Available	Available	Available	NA	NA	NA	NA	NA	Available
Overall Length (L)(mm)	115	115	150	115	95 ～ 115	-	115	-	125 ～ 140	115	150	115	115	150 ～ 200	-	110	115	115	115	115	115	-	125	115	115	150	115	150	200	115	115	115	115	115	200

Loading...