Step Drills

• 

  Spiral Step Drill Inch (Non-coated High-Speed Steel)

  RUKO

  [Features]
  · A high-grade material is used, enabling stable drilling without load or chatter.
  [Applications]
  · Work materials: Iron plate (items of strength 900 N/mm² or less), brass, aluminum, plastic (up to 4 mm)

  Days to Ship:	7 Day(s) or more

• 

  Spiral Step Drill Set (Titanium Aluminum Coated Type) Set of 3

  RUKO

  [Features]
  · A high-grade material is used, enabling stable drilling without load or chatter.
  [Applications]
  · Work materials: Iron plate, copper plate, stainless steel, aluminum, plastic (up to 4 mm)
  [Set Contents]
  · 101050-9F, 101051F, 101052F

  Days to Ship:	7 Day(s) or more

• 

  Spiral Step Drill Inch (Non-coated Cobalt High-Speed Steel)

  RUKO

  [Features]
  · A high-grade material is used, enabling stable drilling without load or chatter.
  [Applications]
  · Work materials: Iron plate (items of strength 900 N/mm² or less), brass, aluminum, plastic (up to 4 mm)

  Days to Ship:	7 Day(s) or more

• 

  MiSUMi C-VALUE

  TiN-Coated High-Speed Steel Step Drill

  MISUMI

  Frequently used standard sizes are offered at affordable prices

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Step Drill for Electrical Work and Facility Construction" (2-Flute Titanium-Coated Type)

  TRUSCO NAKAYAMA

  [Features]
  · Consists of sizes suitable for electricity and equipment construction.
  · Since the tip has been given a thinning finish, it bites in lightly and does not cause point misalignment.
  [Applications]
  · Work materials: Iron plate (2 mm), stainless steel plate (up to 1 mm).

  Days to Ship:	6 Day(s) or more

• 

  "Step Drill for Plastic" (2-Flute Type)

  TRUSCO NAKAYAMA

  [Features]
  · Hexagonal shaft, can be mounted onto an impact driver with "one touch".
  · Ideal for enlarging/repairing holes in resin materials, and for drilling holes for temporary piping or rain gutters.
  · Exhibits stable sharpness for hole drilling onto pipe surfaces without causing chattering.
  [Applications]
  · Work materials: Resin, drainage pipe (75 mm or more).
  · Plastic material processing.
  · For temporary plumbing work (for drain pipes of 75 mm or more).

  Days to Ship:	6 Day(s) or more

• 

  Stage Drill Straight Shaft Type Tin Coating

  LOBTEX

  One tool can be used for drilling, expanding pilot holes, repairing and chamfering at various diameters. Supports various applications and materials such as thin steel plate, wood screw pilot holes, pipe bent surfaces, etc. Uses Cobalt HSS for High-Performance in Both Sharpness and Operating Life.
  
  [Features]
  · The blade has special processing and unique polishing which reduces the resistance when working and provides more sharpness with excellent cutting dust discharge.
  · The drill has little horizontal slippage and has excellent bite on the ground material, so there is no need for center punching.
  · Minimal back burring, which reduces deburring work after drilling.

  Days to Ship:	6 Day(s) or more

• 

  Spiral Step Drill (2-Flute Type)

  ALPEN

  [Features]
  · An easy-to-use 2-flute spiral step drill that provides stable workability.
  [Applications]
  · Work materials: Iron (4 to 6 mm)
  [Material]
  · High-speed steel

  Days to Ship:	7 Day(s) or more

• 

  Titanium Coated Spiral Step Drill With Stopper, 12 Steps, ø4 to 22 mm, STD-22

  EARTH MAN

  [Applications]
  · For drilling, chamfering and increasing hole diameters
  [Features]
  · Features a stopper which prevents the drill from piercing through, increasing safety and work efficiency
  · Rapid cutting and sharp spiral grooves
  · Titanium coated for improved durability
  [Specification]
  · Drilling size: ø4/6/8/10/12/13/15/16/18/20/21/22 mm
  · Maximum drillable plate thickness: 2.0 mm
  · Materials: titanium coated high-speed steel
  · 6.35 mm hex shank

  Days to Ship:	7 Day(s) or more

• 

  TiN-Coated High-Speed Steel Step Drill 3-Piece Set

  MISUMI

  Frequently used standard sizes are offered in a set at an affordable price

  Days to Ship:	6 Day(s) or more

• 

  Mushroom drill (silver type)

  OMIKOGYO

  [Features]
  · One tool that can be used for drilling, hole enlargement and chamfering holes of various sizes. (*Quantity: 1 piece)
  · Made using cobalt HSS.
  · A durable type with excellent cutting performance.
  · Dimension display with laser marking.
  · The hole dimensions are not erased.
  · Tip angle 120°.
  · Also works with stainless steel.
  · Furthermore, punching is not required since thinning is applied.
  · Positioning can also be done in one punch.

  Days to Ship:	6 Day(s) or more

• 

  Mushroom drill (for inserts and roofs)

  OMIKOGYO

  [Features]
  · A specialist in boring more single diameters faster and smoother. (*Quantity: 1 piece)
  · Cuts at every 90°.
  · Allows speedy continuous hole drilling work. Has also been processed to prevent biting in on the far side of the hole.
  · Products for inserts are titanium coated.
  · It prevents welding of chips and allows continuous work for a long time.

  Days to Ship:	6 Day(s) or more

• 

  Mushroom drill (gold type)

  OMIKOGYO

  [Features]
  · One tool that can be used for drilling, hole enlargement and chamfering holes of various sizes. (*Quantity: 1 piece)
  · Made using cobalt HSS.
  · A durable type with excellent cutting performance.
  · Dimension display with laser marking.
  · The hole dimensions are not erased.
  · Tip angle 120°.
  · Also works with stainless steel.
  · Furthermore, punching is not required since thinning is applied.
  · Positioning can also be done in one punch.
  · Gold types feature a titanium coating.
  · It prevents welding of chips and maintains stable cutting performance.

  Days to Ship:	6 Day(s) or more

• 

  Tap pilot mushroom drill

  OMIKOGYO

  [Features]
  · Specializes in pilot holes. (*Quantity: 1 piece)
  · Supports multiple sizes as only spiral step drills can do.
  · Just one unit can be used to drill various sized tap pilot holes.
  · Made using cobalt HSS.
  · A durable type with excellent cutting performance.
  · Titanium coating which prevents welding of chips.
  · Maintains stable cutting capability.
  · Dimension display with laser marking.
  · The hole dimensions are not erased.

  Days to Ship:	6 Day(s) or more

• 

  Spiral Cut Mushroom Drill

  OMIKOGYO

  [Features]
  · Spiral shape which is the first to be produced in Japan.
  · Drilling speed over 2 times higher, service life over 3 times longer. (*Quantity: 1 piece)
  · Spiral shape which is the first to be produced in Japan cuts well.
  · Dimensions list.
  · Cutting speed is at least twice as fast as the conventional product.
  · 1.6 mm iron plate: 14 seconds reduced to 4 seconds, 1 mm stainless steel: 10 seconds reduced to 5 seconds (422 type, at 1,300 min-1).
  · Made using cobalt HSS.
  · A durable type with excellent cutting performance.
  · Dimension display with laser marking.
  · The hole dimensions are not erased.
  · Tip angle 120°.

  Days to Ship:	6 Day(s) or more

• 

  Poly-Click Series, Carbide Step Drill Bit

  MIYANAGA

  [Features]
  · Carbide blade tip, usable for drilling work materials such as stainless steel.
  · Drilling of 5 sizes is possible with one unit.
  · Extremely economical as parts can be replaced.
  · The blade tip can be exchanged with a single touch, making it very convenient.

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Spiral Step Drill" (Hex-Shaft 3-Flute Titanium-Coated Type)

  TRUSCO NAKAYAMA

  [Features]
  · The change from 2-flute to 3-flute achieves light and speedy hole drilling, hole expansion and stable sharpness without chattering.
  · A 3-flute type that mitigates the burden on the cutting edge and increases the service life of the blade. It discharges chips quickly and reduces welding.
  · The 3-flute tip and thinning finish provide quick through work with no center misalignment.
  · Consists of many professional specifications and sizes, frequently used on worksites.
  [Applications]
  · Work materials: Iron plate, copper plate, galvalume (up to 2 mm), aluminum plate, wood, resin (up to 3 mm), stainless steel plate (up to 1 mm).

  Days to Ship:	6 Day(s) or more

• 

  "Spiral Step Drill" (2-Flute Titanium Coated Type)

  TRUSCO NAKAYAMA

  [Features]
  · It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.
  · Adopts a titanium coating with excellent heat resistance.
  · The cutting speed and durability have been improved compared with the straight blade type.
  [Applications]
  · Work materials: Iron plate, copper plate (up to 2 mm), aluminum plate, resin (3 to 4 mm), stainless steel plate (up to 1 mm).

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Step Drill" (2-Flute Titanium-Coated Type)

  TRUSCO NAKAYAMA

  [Features]
  · Since the tip has been given a thinning finish, it bites in lightly and does not cause point misalignment.
  [Applications]
  · Work materials: Iron plate, copper plate (up to 2 mm), aluminum plate, wood, resin (3 to 4 mm), stainless steel plate (up to 1 mm).

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Step Drill for Electrical Work and Facility Construction" (2-Flute Titanium-Coated Type)

  TRUSCO NAKAYAMA

  [Features]
  · Consists of sizes suitable for electricity and equipment construction.
  · Since the tip has been given a thinning finish, it bites in lightly and does not cause point misalignment.
  [Applications]
  · Work materials: Iron plate, copper plate (up to 2 mm), stainless steel plate (up to 1 mm).

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Step Drill" (2-Flute Type)

  TRUSCO NAKAYAMA

  [Features]
  · Prevents rust from forming on the blade thanks to the black oxide surface finishing.
  · Since the tip has been given a thinning finish, it bites in lightly and does not cause point misalignment.
  [Applications]
  · Work materials: Iron plate, copper plate (up to 2 mm), aluminum plate, wood, resin (3 to 4 mm), stainless steel plate (up to 1 mm).

  Days to Ship:	6 Day(s) or more

• 

  "SDS One-Touch Adapter" (for φ10 Shank)

  TRUSCO NAKAYAMA

  [Features]
  · Converts the shank of Nice Mighty to a SDS shank.
  · Supports SDS-Plus drills.
  [Applications]
  · SDS shank chuck drill.

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Hex-Shaft Adapter" (for φ10 Shank)

  TRUSCO NAKAYAMA

  [Features]
  · Converts Nice Mighty (φ10 shank) to a hexagonal shaft (6.35 mm) in a single operation.
  · Commercially available driver bit is used for adapter hexagonal shaft side.
  · Also allows exchange of commercially available driver bits with a single touch.
  [Applications]
  · Electric drill.

  Days to Ship:	6 Day(s) or more

• 

  "Anti-Back Pain Easy Bar" (for φ10 Shank)

  TRUSCO NAKAYAMA

  [Features]
  · Drilling in a narrow space can be performed easily while standing.
  · Extends Nice Mighty (step drill).
  · This does not require any set screws and can be installed with a single touch.
  [Applications]
  · 100 V electric drill.

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Spiral Step Drill" (Straight 3-Flute Titanium-Coated Type)

  TRUSCO NAKAYAMA

  [Features]
  · The change from 2-flute to 3-flute achieves light and speedy hole drilling, hole expansion and stable sharpness without chattering.
  · A 3-flute type that mitigates the burden on the cutting edge and increases the service life of the blade. It discharges chips quickly and reduces welding.
  · The 3-flute tip and thinning finish provide quick through work with no center misalignment.
  · Consists of many professional specifications and sizes, frequently used on worksites.
  [Applications]
  · Work materials: Iron plate, copper plate, galvalume (up to 2 mm), aluminum plate, wood, resin (up to 3 mm), stainless steel plate (up to 1 mm).

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Step Drill" (2-Flute Titanium-Coated Type)

  TRUSCO NAKAYAMA

  [Features]
  · Titanium coating with excellent heat resistance provides a long service life.
  · Since the tip has been given a thinning finish, it bites in lightly and does not cause point misalignment.
  [Applications]
  · Work materials: Iron plate, copper plate (up to 2 mm), aluminum plate, wood, resin (3 to 4 mm), stainless steel plate (up to 1 mm).

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Step Drill" (2-Flute Type)

  TRUSCO NAKAYAMA

  [Features]
  · Prevents rust from forming on the blade thanks to the black oxide surface finishing.
  · Since the tip has been given a thinning finish, it bites in lightly and does not cause point misalignment.
  [Applications]
  · Work materials: Iron plate, copper plate (up to 2 mm), aluminum plate, wood, resin (3 to 4 mm), stainless steel plate (up to 1 mm).

  Days to Ship:	6 Day(s) or more

• 

  "Nice Mighty Step Drill" (2-Flute Titanium-Coated Type)

  TRUSCO NAKAYAMA

  [Features]
  · The original spiral blade reduces welding of chips. The blade service life has been increased.
  · A large diameter size Nice Mighty, hexagonal shaft (6.35 mm) specification.
  · A commercially available screwdriver bit is used for the shank and thus the bit can be replaced with one touch in the event of shaft breakage.
  · Professional specification (for electric facilities), and size specified.
  [Applications]
  · Work materials: Iron plate, copper plate (up to 2 mm), aluminum plate, wood, resin (3 mm), stainless steel plate (up to 1 mm).
  · Rechargeable drill / Electric drill.

  Days to Ship:	6 Day(s) or more

• 

  Titanium coating spiral step drill

  H & H

  For boring holes in thin stainless steel panel, thin iron panel, aluminum panel, plastic, wood, non-flammable material, and other material

  Days to Ship:	6 Day(s) or more

• 

  Center Punch

  SK 11

  Unified product quality is ensured using special thermal treatment.

  Days to Ship:	9 Day(s) or more

• 

  Retractable Awl

  SK 11

  Retractable awl convenient for portability.
  [Features]
  · Needle storage type, convenient and portable.
  [Applications]
  · Ideal for drilling and precision work.

  Days to Ship:	6 Day(s) or more

• 

  Stage Drill Straight Shaft Type

  LOBTEX

  [Features]
  · One tool can be used for drilling, expanding pilot holes, repairing and chamfering at various diameters.
  · Supports various applications and materials such as thin steel plate, wood screw pilot holes, pipe bent surfaces, etc.
  · Uses Cobalt HSS for High-Performance in Both Sharpness and Operating Life.
  · The blade has special processing and unique polishing which reduces the resistance when working and provides more sharpness with less discharge of cutting dust.
  · The drill has little horizontal slippage and has excellent bite on the work material, meaning that center punching is not required.
  · Minimal back burring, which reduces deburring work after drilling.

  Days to Ship:	6 Day(s) or more

• 

  Stage Drill Hexagon Shaft Type

  LOBTEX

  [Features]
  · One tool can be used for drilling, expanding pilot holes, repairing and chamfering at various diameters.
  · Supports various applications and materials such as thin steel plate, wood screw pilot holes, pipe bent surfaces, etc.
  · Uses Cobalt HSS for High-Performance in Both Sharpness and Operating Life.
  · The blade has special processing and unique polishing which reduces the resistance when working and provides more sharpness with less discharge of cutting dust.
  · The drill has little horizontal slippage and has excellent bite on the work material, meaning that center punching is not required.
  · Minimal back burring, which reduces deburring work after drilling.

  Days to Ship:	6 Day(s) or more

• 

  Stage Drill Hexagon Shaft Type Tin Coating

  LOBTEX

  One tool can be used for drilling, expanding pilot holes, repairing and chamfering at various diameters. Supports various applications and materials such as thin steel plate, wood screw pilot holes, pipe bent surfaces, etc. Uses Cobalt HSS for High-Performance in Both Sharpness and Operating Life.
  
  [Features]
  · The blade has special processing and unique polishing which reduces the resistance when working and provides more sharpness with excellent cutting dust discharge.
  · The drill has little horizontal slippage and has excellent bite on the ground material, so there is no need for center punching.
  · Minimal back burring, which reduces deburring work after drilling.

  Days to Ship:	6 Day(s) or more

• 

  Step Drill (3-Flute Type)

  RUKO

  [Features]
  · The 3-flute specification allows stable hole drilling with no load and no chatter.
  [Applications]
  · Work materials: Iron (items of strength 900 N/mm² or less), aluminum, brass, plastic (up to 2 mm for plastic only, up to 4 mm for others)

  Days to Ship:	6 Day(s) or more

• 

  Step Drill (3-Flute Titanium-Coated Type)

  RUKO

  [Features]
  · The 3-flute specification allows stable hole drilling with no load and no chatter.
  [Applications]
  · Work materials: Iron (items of strength 900 N/mm² or less), brass, plastic (up to 2 mm for plastic only, up to 4 mm for others)

  Days to Ship:	7 Day(s) or more

• 

  Spiral Step Drill (2-Flute Type)

  RUKO

  [Features]
  · It bites well onto workpieces and enables stable and quick work.
  [Applications]
  · Work materials: Iron (items of strength 900 N/mm² or less), aluminum, brass, plastic (up to 2 mm)

  Days to Ship:	7 Day(s) or more

• 

  Spiral Step Drill (2-Flute Type)

  RUKO

  [Features]
  · It bites well onto workpieces and enables stable and quick work.
  [Applications]
  · Work materials: Iron (items of strength 900 N/mm² or less), aluminum, brass, plastic (up to 2 mm for plastic only, up to 4 mm for others)

  Days to Ship:	7 Day(s) or more

• 

  Spiral Step Drill (2-Flute Titanium Coated Type)

  RUKO

  [Features]
  · It bites well onto workpieces and enables stable and quick work.
  [Applications]
  · Work materials: Iron (items of strength 900 N/mm² or less), brass, plastic (up to 2 mm)

  Days to Ship:	7 Day(s) or more

• 

  Spiral Step Drill (2-Flute Titanium Coated Type)

  RUKO

  [Features]
  · It bites well onto workpieces and enables stable and quick work.
  [Applications]
  · Work materials: Iron (items of strength 900 N/mm² or less), brass, plastic (up to 2 mm for plastic only, up to 4 mm for others)

  Days to Ship:	6 Day(s) or more

• 

  Extension bar for mushroom drill

  OMIKOGYO

  [Features]
  · Extends 450 mm to enable working in a comfortable position.
  · Can be installed to 10 mm shank spiral step drills.
  [Applications]
  · For punching holes in high places or locations distant from the hand.
  [Material]
  · Carbon Steel

  Days to Ship:	7 Day(s) or more

• 

  Extension bar for mushroom drill

  OMIKOGYO

  [Features]
  · Extends 450 mm to enable working in a comfortable position.
  · Mount onto the 6.35 hex shank of a spiral step drill or hole cutter.
  [Applications]
  · For punching holes in high places or locations distant from the hand.
  [Material]
  · Carbon Steel

  Days to Ship:	7 Day(s) or more

• 

  Spiral Stage Drill (2-Flute Titanium Coated Type)

  LOBTEX

  [Features]
  · One tool can be used for drilling, expanding pilot holes, repairing and chamfering at various diameters.
  · Supports various uses and materials such as thin iron plate, wood screw pilot holes, pipe bent surfaces, etc.
  · Due to the acute rake angle achieved by the adoption of the spiral groove, the sharpness has been greatly improved compared to conventional products.
  · The blade has special processing and unique polishing which reduces the resistance when working and provides more sharpness with less discharge of cutting dust.
  · The drill has little horizontal slippage and has excellent bite on the ground material, so there is no need for center punching.
  [Applications]
  · Work materials: Iron plate, wood, plastic, etc. (Do not use with heat processed metal plates.)
  [Material]
  · Cobalt HSS

  Days to Ship:	7 Day(s) or more

• 

  Spiral Stage Drill (2-Flute Type)

  LOBTEX

  [Features]
  · With the spiral groove, the rake angle is more acute than a straight groove, resulting in considerably improved cutting performance.
  · Cobalt HSS has been used to provide excellent wear and heat resistance and an enduring sharpness.
  · One tool can be used for various types of machining including drilling, expanding pilot holes, repairing holes, and chamfering.
  · Supports various applications and materials such as thin steel plate, wood screw pilot holes, pipe bent surfaces, etc.
  · The tip grips the surface well and center punching is not necessary.
  [Applications]
  · Work materials: Steel plate (up to 2 mm), stainless steel plate (up to 1.2 mm), wood, plastic (up to 2 mm).
  [Material]
  · Cobalt HSS

  Days to Ship:	7 Day(s) or more

• 

  Spiral Step Drill (2-Flute Cobalt High-Speed Steel)

  ALPEN

  [Features]
  · Cobalt high-speed steel used as material to provide both stable workability and long product life.
  [Applications]
  · Work materials: Iron (4 to 6 mm)

  Days to Ship:	7 Day(s) or more

Loading...