Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 21/4/2024 to 3:30 (IST) 22/4/2024. We apologize for the inconvenience.
Due to an increase in demand, the lead time of some of the electrical items from our eCatalogue has increased abnormally and may cause delays in delivery or order suspension. We apologize for the inconvenience and appreciate your kind understanding. Once the supply will get normalized, we will update the same.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Thread-Cutting-Related Tools

Threading-related tools are a variety of useful tools used when setting up screws, excluding typical taps and dies. Drill tap with integrated drill and tap, and female thread is set at a time even when there is no pilot hole, enabling high-efficiency work. A tap / drill bit set with a drill bit set for pilot holes attached to the tap set. A check pin dedicated to pilot holes that can easily and accurately inspect the pilot hole diameter of the screw and reduce defects in female thread processing. The lineup includes a magnet tapper that can be fixed with a magnet and tapped vertically, and that can prevent twisting bending and breakage. There are a wide variety of specifications for screws, so select a screw standard, thread diameter, and ridge pitch according to the processing purpose.

Brand	ISHIHASHI (6) KANETEC (1) NEW STRONG (1) OSG (3) SKC (1) UNION TOOL (1) YAMAWA MFG (4)
CAD	2D 3D
Days to Ship	All 5 Day(s) or Less 6 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less

17 items

Sort By

: 30; 45; 60

You can add up to 6 items per a category to the compare list. Compare

Cobalt spiral type/drill set【21 Pieces Per Package】

ISHIHASHI

Set of Cobalt Spiral Taps and Cobalt Masamune Drills in Steel Case

From: ₹ 1,278.05
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Hand Tap / Drill Set【21 Pieces Per Package】

ISHIHASHI

Set of 14 Medium Hand Taps and 7 Pilot Hole Drills in Case

From: ₹ 782.27
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Tire Valve Thread

SKC

[Applications]
It can be used to tap threaded holes in tire valves.
[Features]
High speed steel with excellent heat resistance and thermal damage resistance is used.

From: ₹ 2,851.55
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】

ISHIHASHI

[Features]
・ A set of hand taps and prepared hole drills for general steel
[Applications]
・ Work material: General steel

From: ₹ 427.17
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T

YAMAWA MFG

Provides simple check of pilot hole diameter. Uses high speed tool steel out of consideration for wear resistance. Can be used for either through holes or blind holes with margin.

From: ₹ 1,236.24
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Magnet Tapper

NEW STRONG

[Specifications]
· Shape: Thread-cutting-related tool
· Usage: (1) Attach to workpiece using magnets. (2) Set compatible tap, rotate the handle to cut the screw.
[Applications] (1) Cases where workpieces are large and mechanical machining is not possible. (2) Manual operation types not requiring electricity and thus enabling work outdoors. (3) Applicable tap: M3-M12

From: ₹ 40,569.33
Days to Ship: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

MACHINING CENTER Tap (Normal Length)_EX-S-MCT

OSG

Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

From: ₹ 1,374.56
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

MACHINING CENTER Tap with Long Shank_EX-MCT

OSG

Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

From: ₹ 3,581.89
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Electro plated Diamond Tap for Ceramics_ED-PNT

OSG

[Features]
·With no lead like a regular power strip in this product, the tool attached to the shaft of the pilot hole performs a self-rotating and orbital motion to grind a thread with a lead.
·The X, Y, and Z axes are fed simultaneously, so the prerequisite for use is that the machine is equipped with a 3-axis simultaneous control mechanism.

From: ₹ 16,820.97
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Cobalt jet/spiral type/drill set【21 Pieces Per Package】

ISHIHASHI

Set of Cobalt Jet Taps, Cobalt Spiral Taps, and Cobalt Masamune Drills in Steel Case

From: ₹ 1,243.28
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Spiral Tap / Drill Set【21 Pieces Per Package】

ISHIHASHI

Set in steel case including spiral taps, pilot hole drills, and tap wrenches

From: ₹ 1,284.35
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Jet/spiral tap/drill set【21 Pieces Per Package】

ISHIHASHI

Set in steel case including jet taps, spiral taps, pilot hole drills, and tap wrenches

From: ₹ 1,208.71
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S

YAMAWA MFG

5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.

From: ₹ 1,833.60
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Union Tool Screw Cutting Tool

UNION TOOL

[Features]
· Thread cutting tool for machining carbide alloys and hard brittle materials. (Thread mill type)
· Enables direct engraving, dramatically improving efficiency and precision of discharge and grinding.
· Uses a newly developed diamond coating with ultra high hardness for toughness and adhesive strength.

From: ₹ 25,284.09
Days to Ship: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Mag Tap 3–12 mm

KANETEC

[Features]
· Small, lightweight, and easy to carry around.
· Tap guide holder that can easily perform accurate tapping operation on plane and side surface.
[Applications]
· For threading work.
· A tool that simplifies work by facilitating tapping of pilot holes in iron plate and steel, etc., with a work stand installed with a powerful magnet.

From: ₹ 36,876.87
Days to Ship: 10 Day(s) or more

10 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

YAMAWA MFG

[Features]
· (Straight type) Roll tap check pin that can be used to check several types of pilot hole diameters and pilot hole depth.
· High-speed tool steel is used out of consideration for abrasion resistance.
· Can be used for blind holes.

From: ₹ 1,955.64
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

YAMAWA MFG

[Features]
· (Taper type) Roll tap pilot hole check pin that can be used to easily check pilot hole diameters with the 1 tool.
· High-speed tool steel is used out of consideration for abrasion resistance.
· Can be used for both through-holes and blind-holes if the latter has ample room.

From: ₹ 1,378.36
Days to Ship: 5 Day(s) or more

5 Day(s) or more


Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	ISHIHASHI	ISHIHASHI	SKC	ISHIHASHI	YAMAWA MFG	NEW STRONG	OSG	OSG	OSG	ISHIHASHI	ISHIHASHI	ISHIHASHI	YAMAWA MFG	UNION TOOL	KANETEC	YAMAWA MFG	YAMAWA MFG
Product Series	Cobalt spiral type/drill set【21 Pieces Per Package】	Hand Tap / Drill Set【21 Pieces Per Package】	Tire Valve Thread	Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】	Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T	Magnet Tapper	MACHINING CENTER Tap (Normal Length)_EX-S-MCT	MACHINING CENTER Tap with Long Shank_EX-MCT	Electro plated Diamond Tap for Ceramics_ED-PNT	Cobalt jet/spiral type/drill set【21 Pieces Per Package】	Spiral Tap / Drill Set【21 Pieces Per Package】	Jet/spiral tap/drill set【21 Pieces Per Package】	Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S	Union Tool Screw Cutting Tool	Mag Tap 3–12 mm	Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S	Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T
From	₹ 26,839.00	₹ 16,427.64	₹ 2,851.55	₹ 11,106.22	₹ 1,236.24	₹ 40,569.33	₹ 1,374.56	₹ 3,581.89	₹ 16,820.97	₹ 26,108.78	₹ 26,971.35	₹ 25,382.82	₹ 1,833.60	₹ 25,284.09	₹ 36,876.87	₹ 1,955.64	₹ 1,378.36
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	10 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Screw size (Nominal)	-	-	TV8	-	M2 ～ M12	-	M8	M10 ～ M12	-	-	-	-	No.10 ～ M12	M2 ～ M8	-	No.10 ～ M12	No.10 ～ M12
Screw Types	Meter	-	-	-	Meter	-	Meter	Meter	Other	Meter	-	-	Meter / unified	-	-	Meter / unified	Meter / unified
work material	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-	-	-	-	-	-	-
Pitch (P), Number of Threading(mm)	-	-	32	-	0.4 ～ 1.75	-	1.25	1.5	0.5 ～ 2	-	-	-	0.35 ～ 64	0.4 ～ 1.25	-	0.4 ～ 64	0.4 ～ 64
Tool Material Type	Cobalt HSS	-	High-speed steel	-	High-speed steel	-	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	-	-	High-speed steel	High-speed steel
Tap Type	Thread-cutting-related tool	Thread-cutting-related tool	Point tap	Thread-cutting-related tool	Thread-cutting-related tool	-	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool
Hole type	-	-	For blind hole	-	-	-	For through hole / For blind hole	For through hole / For blind hole	-	-	-	-	For through hole / For blind hole	-	-	For blind hole	For through hole / For blind hole
Chamfer threads (Lcf)	-	-	-	-	-	-	3P	3P	-	-	-	-	-	-	-	-	-
Coating Type	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	-	Non-Coated	Non-Coated	-	Non-Coated	Non-Coated	Non-Coated	-	Other	-	Non-Coated	Non-Coated
Coating Y/N	NA	NA	NA	NA	NA	-	NA	NA	-	NA	NA	NA	NA	Available	-	NA	NA
Overall Length (L)(mm)	-	-	70	-	42 ～ 110	-	70	150	50 ～ 80	-	-	-	41.5 ～ 121	50 ～ 60	-	41.5 ～ 121	59.5 ～ 61.5