No Set-Up Charges, On Time Delivery.
All Categories
Search by Category
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- Connectors
- Wires/Cables
- Crimp Terminals
- Cables by Application
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Personal Computers / AV Cables
- LAN/Network Cables
- Cables with Connectors
- RS232C Cables
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Step Drills
- Core Drills (Tip Tools)
- Hole Saws
- Clean Key Cutters
- Drills for Concrete
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Magnetic Drilling Machine Cutters
- Fixtures Related to Cutting Tools
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Tool Wagons
- Cushioning Materials
- Stretch Films
- Tool Cabinets / Container Racks
- Cardboard
- Storage Supplies
- Magic Tapes / Tying Belts
- Suspended Clamps/Suspended Belts
- Chain Block Cranes
- Bottles/Containers
- Packing Support Equipment
- Lifters / Hand Pallets
- Container Pallets
- Shelves/Racks
- Work Benches
- Jack Winches
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- DIN Type Components
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
Brand Search
Screw-Hole-Related Tools
[What are screw hole related tools?]
Tools for cutting male threads, female threads, or fixing/removing screw threads. Depending on the shape of the groove, it is divided into categories such as triangular thread, square thread, trapezoidal thread, saw tooth screw, round thread, ball screw, and "triangular screw" which is the fastening screw most commonly used. Triangular threads can be divided into three types: "metric thread", "inch thread", and "pipe thread", with standards of "ISO (JIS) thread", "unified thread" and "Whitworth thread".
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Days to Ship |
|
|---|
-
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
Limited special price is available for the standard sizes
Days to Ship: 5 Day(s) or more -
Broken Tap Extractor Set【5-7 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· A tool that extracts broken taps when broken partway through threading without damaging the screw threads.
· The claw uses a special steel wire with high torsion strength that is not easily broken, so it can be used to easily remove broken taps which have caught strongly.
· Even if the claw is broken, it can be used repeatedly until it becomes too short. Also, since it can be simply exchanged with a replacement jaw, it is extremely economical.
· Dedicated for hand tapping.
[Applications]
· For extracting broken hand taps.Days to Ship: 5 Day(s) or more -
Parallel Tap Series for Pipes General Use SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Days to Ship: 5 Day(s) or more -
Days to Ship: 5 Day(s) or more -
Drill Tap Series Drill Tap DRT
OSG
Very effective in improving productivity thanks to enabling continuous tap hole drilling using the tip drill part and screw tapping processing at the tap part
Days to Ship: 5 Day(s) or more -
Grooveless Tap Series For Non-Ferrous Alloys B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.
Days to Ship: 5 Day(s) or more -
Days to Ship: 5 Day(s) or more -
Thread Repair Tool Set, Tap Die Set
LIGHTSEIKI
[Features]
· Perfect for a wide range of work as diverse sizes are included.
[Applications]
· Thread ridge repairs.
[Specifications]
· Machining thread: Metric thread.
· Tap grade: P3 grade.Days to Ship: 5 Day(s) or more -
Pg Conduit Thread Tap (German Standard)
SKC
It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency
Days to Ship: 5 Day(s) or more -
Days to Ship: 5 Day(s) or more -
High-Speed Steel Point Tap【10 Pieces Per Package】
MISUMI
Limited special price is available for the standard sizes
Days to Ship: 5 Day(s) or more -
Days to Ship: 5 Day(s) or more -
Taper Tap Series for Pipes Spiral Tap SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: 5 Day(s) or more -
Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】
MISUMI
Supports all work materials from general steel to difficult-to-cut materials
Days to Ship: 5 Day(s) or more -
Spiral Tap Series, TiN Coating TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: 5 Day(s) or more -
Days to Ship: 5 Day(s) or more -
Days to Ship: 5 Day(s) or more -
Spiral Tap Oxide Treated SP-OX(N-SP-OX)
YAMAWA MFG
Spiral taps with oxide treatment (OX).
[Features]
· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.
· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.
· Oxide treatment also removes residual stress from the tap, extending the life span.
[Applications]
· Ideal for machining easily welded materials such as stainless steel or low carbon steel.Days to Ship: 5 Day(s) or more -
For Tapered Screw for Pipe (Short Screw Type) S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Days to Ship: 5 Day(s) or more -
TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】
MISUMI
Limited special price is available for the standard sizes
Days to Ship: 5 Day(s) or more -
Days to Ship: 5 Day(s) or more -
Titanium coating point tab PO-V (N-PO-V)
YAMAWA MFG
Coated point tap suitable for low carbon steel to high carbon steel machining.
[Features]
· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
[Applications]
· Can process both synchronously and asynchronously.
· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).Days to Ship: 5 Day(s) or more -
KUKKO
[Features]
Made of chrome vanadium. Bolts can be removed by drilling a hole at the center of the broken bolt and screwing in an extractor counterclockwise.Days to Ship: 10 Day(s) or more -
Days to Ship: 5 Day(s) or more -
TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】
MISUMI
The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available
Days to Ship: 5 Day(s) or more -
Spiral Tap Series, Short Chamfering Type EX-SC-SFT
OSG
Bite length of 1.5 peaks. Ideal for when the effective thread length cannot be obtained in a blind hole with general spiral taps of 2.5-thread biting length
Days to Ship: 5 Day(s) or more -
Spiral Tap Series, for Soft Steel, Deep Holes MS-DH-SFT
OSG
Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.
Days to Ship: 5 Day(s) or more -
Hand Tap Series TiN Coating Long Shank TIN-LT
OSG
Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.
Days to Ship: 5 Day(s) or more -
Point Tap Series For General Use EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
Days to Ship: 5 Day(s) or more -
Tapered Tap Series for American Piping General Use (NPT) TPT
OSG
Used to process tapered female pipe threads. Mainly used for connecting pipes
Days to Ship: 5 Day(s) or more -
OSG
Mainly used for tapping nuts. The threaded length and extended shank portion are designed for good workability with nuts, allowing continuous machining until the shank portion is completely filled with stacked up nuts.
Days to Ship: 5 Day(s) or more -
Hand Tap Set (for metric screws/HSS-E)
TRUSCO NAKAYAMA
[Features]
· Can be used for both through holes and blind holes.
· It is a high-speed steel (HSS-E) tap set.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· A straight-type handle for hand tap and hand reamer.
[Applications]
· For tapping.Days to Ship: 5 Day(s) or more -
"Extractor Set" (Spiral Model)【3-10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Bolts that are broken inside screw holes can be extracted without damaging the screw holes.
[Applications]
· For the extraction of things like bolts and pipes that had broken inside.Days to Ship: 5 Day(s) or more -
Model A Tap Series, Point Tap A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: 5 Day(s) or more -
YAMAWA MFG
The spiral tap is ideal for machining blind holes as scrap is discharged from the grooves twisted in the same direction as the threads.
[Features]
· The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
· Intermittent cutting of female threads with key groove is also possible.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining blind holes.
* N-SP models will transition to SP as soon as stock runs out.Days to Ship: 5 Day(s) or more -
Days to Ship: 7 Day(s) or more -
Carbide Tap for Ultra High Hardness Steel UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
Days to Ship: 5 Day(s) or more -
Tap For Tapered Pipe Thread (PT Screw)
TRUSCO NAKAYAMA
[Features]
· Tap for tapered pipe thread.
[Applications]
· Work materials: cast iron, light metals.Days to Ship: 5 Day(s) or more -
Hand Tap/Die Set (for metric screws)
TRUSCO NAKAYAMA
[Features]
· It is a set of hand-taps from M3 to M16, 38-diameter circular dies, tap handle, tap holder and die handle that can be used to make and clean coarse threaded holes and threads.
· A set item convenient for storage.
[Applications]
· Work materials: Iron, light metal.
· Creation and correction of coarse screw threads.
[Material]
· Low Alloy Steel (SKS)Days to Ship: 5 Day(s) or more -
High-Speed Steel Spiral Tap【10 Pieces Per Package】
MISUMI
Limited special price is available for the standard sizes
Days to Ship: 5 Day(s) or more -
TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】
MISUMI
Limited special price is available for the standard sizes
Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
From general steel to difficult-to-cut materials, this coated tap allows high-speed, high-efficiency threading of blind holes.
[Features]
· A tap that adopts powdered high-speed steel with excellent wear resistance and has a TiN coated surface.
· It has a stable life using high-speed, high-precision threading.
· Special relief prevents over-cutting due to excessive advancement of the tap.
[Applications]
· High-speed, high-efficiency threading of through holes on materials ranging from general steel to difficult-to-cut materials.Days to Ship: 5 Day(s) or more -
G Spiral Tap for Deep Holes in Stainless Steel GSPS
NACHI(FUJIKOSHI)
Coating tap suitable for stainless steel and places prone to chip clogging.
[Features]
· Adopts powdered high-speed steel with excellent wear resistance.
· Tap with TiN coating on the surface and stable service life due to high-speed and high-efficiency threading.
· A thick neck, which eliminates chipping and wrapping of chips, has been adopted.
[Applications]
· Coating tap suitable for stainless steel and places prone to chip clogging.Days to Ship: 5 Day(s) or more -
Tap Series for Insert Screw Point Tap Long Shank HL-LT-POT
OSG
Used for thread tapping of female threads by inserting the insert (helical coil) into a through hole
Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | TRUSCO NAKAYAMA | OSG | MISUMI | OSG | OSG | ENGINEER | LIGHTSEIKI | SKC | OSG | MISUMI | MISUMI | OSG | MISUMI | OSG | SKC | ISHIHASHI | YAMAWA MFG | YAMAWA MFG | MISUMI | SKC | YAMAWA MFG | KUKKO | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG |
| Product Series | Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】 | TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】 | Tapered Tap Series for American Piping General Use (NPT) TPT | TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more |
| Screw Types | Meter | - | Parallel for Pipes | Meter | Meter | Meter / unified | - | - | Other | Meter / unified | Meter | - | Taper for Pipe | Meter | Meter | - | Meter / unified / Whitworth / Taper for Pipe / Parallel for Pipes | Meter / unified / Whitworth | Taper for Pipe | Meter | Meter | Meter | - | Meter | Meter | Meter | Meter / unified | Meter | Meter / unified / Whitworth / Sewing Machine | Taper for Pipe | Meter / unified / Whitworth | Meter | - | - | Meter / unified | Meter / unified / Whitworth / Sewing Machine | Meter | Meter | Taper for Pipe | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | M3 ～ M10 | - | G1 ～ G7/8 | M3 ～ M10 | M3 ～ M16 | No0UN ～ No10UN | M1.4 ～ M6.0 | - | PG7 ～ PG42 | No0UN ～ M100 | M2 ～ M12 | M3 - M10 ～ M5 - M12 | R1 ～ R3/8 | M2 ～ M12 | M1.4 ～ M24 | M2～10 ～ M4～10 | 1/2UN ～ M20 | No.4 ～ M20 | 1′-11 ～ 3/8-19 | M3 ～ M10 | M2 ～ M120 | M3 ～ M12 | - | M3 ～ M10 | M3 ～ M10 | M1 ～ M30 | 1/2UN ～ M42 | M3 ～ M24 | No0UN ～ M48 | NPT1 ～ NPT4 | 1UN ～ M39 | M3 ～ M16 | M1～6 ～ M25～70 | - | 1/2-20UNF ～ M24 | No.1-64UNC ～ M48 | M3 ～ M12 | M2 ～ M20 | 1 ～ 3/8 | - | M2 ～ M12 | M3 ～ M10 | M2.6 ～ M24 | M3 ～ M24 | M3 ～ M12 |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 1.5 | - | 11 ～ 28 | 0.5 ～ 1.5 | 0.5 ～ 2 | 0.25 ～ 80 | 0.3 | - | 16 ～ 20 | 0.25 ～ 80 | 0.4 ～ 1.75 | - | 11 ～ 28 | 0.4 ～ 1.75 | 0.3 ～ 2.5 | - | 0.4 ～ 40 | 0.4 ～ 2.5 | - | 0.5 ～ 1.5 | 0.25 ～ 4 | 0.5 ～ 1.75 | - | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 0.25 ～ 3.5 | 0.4 ～ 48 | 0.5 ～ 3 | 0.25 ～ 80 | 8 ～ 27 | 0.4 ～ 40 | 0.5 ～ 2 | - | - | 0.25 ～ 3 | 0.25 ～ 6 | 0.5 ～ 1.75 | 0.4 ～ 2.5 | - | - | 0.4 ～ 1.75 | 0.5 ～ 1.5 | 0.45 ～ 3 | 0.5 ～ 3 | 0.5 ～ 1.75 |
| Chamfer threads (Lcf) | 1.5 P ～ 9 P | - | 1.5P ～ 4P | 1.5 P ～ 3 P | 5P | 2.5P ～ 4P | - | - | - | 1.5P ～ 9P | 5 P | - | 2.5P | 2.5 P | 2.5P | - | - | 2.5P | 2.5P | 2 P ～ 4 P | 1.5P ～ 9P | 5P | - | 1.5 P ～ 2.5 P | 1.5 P ～ 2.5 P | 1.5P | 2.5P | 1.5P ～ 5P | 5P | 2.5P | - | - | - | - | 5P | 2.5P | 1.5P ～ 5P | 5P | 1.5-Shaped | - | 2.5 P | 5 P | 2.5P | 2.5P | 5P |
| Tool Material Type | Vanadium High-Speed Steel | - | High-speed steel | Carbide | High-speed steel | High-speed steel | - | - | High-speed steel | High-speed steel | Vanadium High-Speed Steel | - | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | - | - | High-speed steel | High-speed steel | Vanadium High-Speed Steel | - | High-speed steel | - | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | - | - | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | Alloy HSS / SKS | - | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Alloy HSS | Alloy HSS | Vanadium High-Speed Steel |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | High Hardness Steel (50-60 HRC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] |
| Tap Type | Hand Tap | Modification/removal Tool | Tap for pipes | Hand Tap | Thread-cutting-related tool | Roll tap | Hand Tap | Oil Hole Tap | Tap for pipes | Hand Tap | Point tap | Tap wrench | Tap for pipes | Spiral Tap | Spiral Tap | Thread-cutting-related tool | Die | Spiral Tap | Tap for pipes | Roll tap | Hand Tap | Point tap | - | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Point tap | Tap for pipes | Thread-cutting-related tool | Hand Tap | Tap wrench | Modification/removal Tool | Point tap | Spiral Tap | Hand Tap | Point tap | Tap for pipes | Hand Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Point tap |
| Hole type | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | - | For blind hole | - | - | - | For through hole / For blind hole | For through hole | - | For blind hole | For blind hole | For blind hole | - | - | For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole | - | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | - | For through hole / For blind hole | - | - | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | - | For blind hole | For through hole | For blind hole | For blind hole | For through hole |
| Coating Y/N | NA | - | NA | NA | NA | NA | - | - | - | NA | NA | - | NA | NA | Available | - | NA | NA | NA | Available | - | Available | - | NA | Available | NA | NA | Available | NA | NA | NA | NA | - | - | Available | NA | Available | Available | NA | NA | NA | Available | Available | Available | NA |
| Coating Type | - | - | Non-Coated | - | Non-Coated | Non-Coated | - | - | - | Non-Coated | - | - | Non-Coated | - | TiN | - | Non-Coated | - | - | TiN | - | TiN | - | - | TiN | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | Other | - | TiN | TiAlN | - | Non-Coated | - | TiN | TiN | TiN | Non-Coated |
| Overall Length (L)(mm) | 46 ～ 75 | - | 55 ～ 170 | 46 ～ 75 | 62 ～ 159 | 30 ～ 62 | - | - | 85 ～ 135 | 30 ～ 275 | 40 ～ 82 | 110 | 55 ～ 110 | 40 ～ 82 | 34 ～ 120 | - | - | 42 ～ 105 | 55 ～ 155 | 46 ～ 75 | - | 46 ～ 82 | - | 46 ～ 75 | 46 ～ 150 | 30 ～ 135 | 40 ～ 175 | 100 ～ 200 | 30 ～ 185 | 55 ～ 170 | 80 ～ 340 | 46 ～ 95 | 170 ～ 1250 | - | 34 ～ 120 | 36 ～ 195 | 100 ～ 150 | 40 ～ 105 | 55 ～ 120 | - | 40 ～ 82 | 46 ～ 150 | 44 ～ 120 | 46 ～ 120 | 100 ～ 150 |
Loading...
Configure
Specification/Dimensions
-
Screw Types
-
Screw size (Nominal)
- CTG-54
- CTC-51
- CTG-42
- CTC-39
- CTG-36
- CTC-31
- CTG-28
- CTC-25
- CTG-22
- CTC-19
- CTG-16
- CTC-15
- No.0
- No0UN
- NO.0-80UNF
- No.0-80UNF
- NO.10
- No.10
- No.1
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- NO.6-32UNC
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1
- 1"
- 1UN
- 1UNS
- BC1
- G1
- G1PF
- M1
- M1.0
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PS1
- PT1
- R1
- Rc1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1´-20UNEF
- 1'-14UNF
- 1'-14UNS
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11.5
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- 1 1/2
- 1"1/2U
- 1"1/2UN
- 1"1/2
- BSF1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11.5
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4U
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11.5
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8U
- 1"1/8UN
- G1"1/8
- NPS1"1/8
- NPT1"1/8
- PS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-14UNEF
- 1'1/8-12UNF
- 1′1/8-11
- 1 1/8-8UN
- 1'1/8-7UNC
- 1´ 1/8-7UNC
- 1'1/8W7
- 1"1/16U
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF1/2
- PS1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4U
- 1"3/4UN
- BSF1"3/4
- G1"3/4
- NPS1"3/4
- NPT1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8U
- 1"3/8UN
- 1"3/8
- BSF1"3/8
- G1"3/8
- PS1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1"3/16U
- 1"3/16UN
- 1/4
- 1/4UN
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PS1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- PS1/4-19
- PT1/4-19
- 1/4-18
- 1/4W20
- 1/4SM24
- 1/4SM40
- 1 5/8
- 1"5/8U
- 1"5/8UN
- BSF1"5/8
- W1"5/8
- 1 5/8-8UN
- 1"5/16U
- 1"5/16UN
- M1～6
- 1"7/8UN
- BSF1"7/8
- W1"7/8
- 1 7/8-8UN
- 1'8UNC
- 1'W8
- 1/8
- 1/8PT
- 1/8UN
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1/8SM40
- 1/8W40
- 1/8SM44
- M1～10
- 1´11.5
- 1'12UNF
- 1'14UNS
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- W1/16
- 1/16-28
- 1/16-27
- 1/16SM80
- 1'20UNEF
- M1.1
- M1.1-1.2
- M1.2
- S1.2
- BC1.37
- M1.4
- S1.4
- M1.4-1.6
- M1.5
- M1.6
- M1.7
- M1.8
- M1.8-2.0
- 2
- 2"
- 2U
- 2UN
- BSF2
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- W2
- W/2
- 2´-11.5
- 2´-11
- 2′-11
- 2-8UN
- 2"1/2UN
- G2"1/2
- NPS2"1/2
- NPT2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/2
- 2´1/2-11
- 2′1/2-11
- 2´1/2-8
- 2"1/4UN
- BSF2"1/4
- NPS2"1/4
- NPT2"1/4
- R2"1/4
- W2"1/4
- 2′1/4-11
- 2"3/4UN
- R2"3/4
- W2"3/4
- 2'4.5UNC
- 2'W4.5
- M2～4.5
- M2～8
- M2～10
- 2'12UN
- M2.2
- M2.2-2.5
- M2.3
- M2.5
- M2.6
- 3M
- 3UN
- G3
- M3
- M3.0
- NPS3
- NPT3
- No3UN
- R3
- Rp3
- W3
- 3´-11
- 3′-11
- 3´-8
- 3"1/2UN
- G3"1/2
- NPS3"1/2
- NPT3"1/2
- R3"1/2
- Rp3"1/2
- 3´1/2-11
- 3′1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF3/4
- PS3/4
- R3/4
- Rc3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～5
- M3～6
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- 3/8W
- BC3/8
- G3/8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3～12
- 3/16
- 3/16UN
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- 3/32
- SM3/32
- W3/32
- 3/32SM56
- 3/32SM100
- M3.5
- 4M
- 4UN
- G4
- M4
- M4.0
- NPS4
- NPT4
- No4UN
- R4
- Rp4
- №4-40UNC
- 4´-11
- 4′-11
- 4M0.75
- M4～6
- M4～10
- M4～13
- M4～14
- M4.5
- 5M
- CTV5
- M5
- M5.0
- No5UN
- TV5
- №5-40UNC
- 5/1
- 5 to 8 mm
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- NPT5/8
- PS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5～10
- M5 - M12
- M5～12
- M5～13
- 5/16
- 5/16UN
- 5/16UNJ
- 5/16W
- BC5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32UN
- W5/32
- 5/32W32
- 5/64SM64
- 5.5M
- M5.5
- 6UN
- M6
- M6.0
- No6UN
- No6UNJ
- W6
- No6-40UNF
- №6-32UNC
- M6～20
- M6.5
- W6.8
- M7
- PG7
- W7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- NPT7/8
- PS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- W"7/8
- 7/8-20UNEF
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- UNC7/16
- UNF7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- 7/32UN
- W7/32
- 7/32W24
- 7/32SM32
- M7.5
- 8UN
- CTV8
- M8
- M8.0
- No8UN
- No8UNJ
- TV8
- W8
- №8-32UNC
- 8 to 12 mm
- M8.5
- M9
- PG9
- 9/16
- 9/16UN
- BC9/16
- UNF9/16
- W9/16
- 9/16-24UNEF
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- W9.5
- W9.8
- 10UN
- M10
- M10.0
- No10UN
- No10UNJ
- TM10
- TR10
- TV10
- TW10
- W10
- №10-32UNF
- №10-24UNC
- M10～13
- M10～25
- M10～30
- M11
- PG11
- W11
- W11/16
- SM11/64
- 11/64SM40
- M12
- M12.0
- M]12
- No12UN
- TM12
- TW12
- W12
- W12.5
- M13
- W13
- W13/16
- PG13.5
- W13.5
- W13.8
- M14
- M14.0
- TM14
- TW14
- W14
- M15
- W15
- W15/16
- SM15/64
- 15/64SM28
- M16
- M16.0
- PG16
- TM16
- TR16
- TW16
- W16
- M17
- W17
- M18
- M18.0
- TM18
- TW18
- W18
- M19
- W19
- M19～32
- M19～33
- M19～38
- M19～42
- M20
- M20.0
- TM20
- TR20
- TW20
- W20
- W20.32
- M21
- PG21
- W21
- M22
- M22.0
- M22X
- TM22
- TW22
- W22
- M23
- W23
- M24
- M24.0
- M24X
- TM24
- TW24
- W24
- M25
- M25X
- TM25
- TW25
- W25
- M25～50
- M25～60
- M25～70
- M25～72
- M26
- TM26
- TW26
- W26
- M27
- W27
- M28
- TM28
- TW28
- W28
- M29
- PG29
- W29
- M30
- TM30
- TW30
- W30
- M32
- TM32
- W32
- M33
- W33
- M34
- W34
- M35
- W35
- M36
- PG36
- TM36
- W36
- M37
- M38
- W38
- M39
- W39
- M40
- TM40
- W40
- M42
- PG42
- W42
- M42～120
- M43
- M44
- W44
- M45
- W45
- M46
- M48
- W48
- M50
- W50
- M52
- W52
- M54
- W54
- M55
- W55
- M56
- W56
- M58
- M60
- W60
- M62
- W62
- M64
- M65
- W65
- M68
- M70
- W70
- M72
- M75
- W75
- M76
- M78
- M80
- M82
- M85
- M90
- M95
- M100
- M110
- M115
- M120
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.34
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.5-2
- 1.75
- 2
- 2.5
- 3
- 3 1/2
- 3.5
- 4
- 4 1/2
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 60
- 64
- 72
- 80
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- ESCO (570)
- OSG (246)
- YAMAWA MFG (164)
- SKC (64)
- TRUSCO NAKAYAMA (61)
- ISHIHASHI (37)
- NACHI(FUJIKOSHI) (30)
- NOGA JAPAN (16)
- SANDVIK (10)
- TANOI MFG (10)
- KUKKO (9)
- GUHRING (8)
- DC SWISS (7)
- H & H (7)
- RENNSTEIG (7)
- ONISHI MANUFACTURING (5)
- ENGINEER (3)
- SK 11 (3)
- EIKOSHA (2)
- LIGHTSEIKI (2)
- NS TOOL (2)
- RUKO (2)
- SMATO (2)
- KANETEC (1)
- KO-KEN TOOL (1)
- NIIGATA SEIKI (SK) (1)
- NAKANISHI (1)
- NEW STRONG (1)
- TSUBOSAN (1)
- UNION TOOL (1)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Step Drills
- Core Drills (Tip Tools)
- Hole Saws
- Clean Key Cutters
- Drills for Concrete
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Magnetic Drilling Machine Cutters
- Fixtures Related to Cutting Tools
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy