Screw-Hole-Related Tools（Screw size (Nominal)：M4 Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.7	Vanadium High-Speed Steel	Point tap	For through hole	6P	Non-Coated	NA	52

  From: ₹ 1,259.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.7	Powder high-speed steel	Roll tap	For blind hole	2P ～ 4P	TiCN	Available	80 ～ 120

  From: ₹ 2,592.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid Dies (for left-hand threads) D LH for Metric Threads

  YAMAWA MFG

  Solid die for left-handed threads with improved die runout precision.
  [Features]
  · High-speed tool steel (HSS) is adopted, realizing stable machining.
  · The front surface is the surface with a marking on the chamfering.
  · The rear is sunk so that the end face makes close contact when the holder is attached.
  · Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
  · Enables hand turned use or use with machinery.
  · Solves problems particular to adjustable type dies, realizing high precision male screw machining.
  [Applications]
  · Ideal for male thread machining with iron or light metals.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.5 ～ 0.7	High-speed steel	Die	-	-	-	NA	-

  From: ₹ 5,483.45
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT

  OSG

  Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	0.7	Carbide	Hand Tap	For through hole / For blind hole	1.5P ～ 3P	Non-Coated	NA	100

  From: ₹ 12,381.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series Carbide New Roll Tap OT-NRT

  OSG

  Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.7	Carbide	Roll tap	For through hole / For blind hole	2P	Non-Coated	NA	52

  From: ₹ 9,528.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IT-Toughlet TiCN Coated

  TANOI MFG

  Rise tap with a correct bite without pitch or angle errors.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7	High-speed steel	Roll tap	-	1P ～ 4P	TiCN	Available	52

  From: ₹ 2,136.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Flute Tap (SKH)

  SKC

  [Applications]
  Can be used for tapping screw holes in stainless steel.
  [Features]
  This spiral flute tap can discharge chips with a coiled groove.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7 ～ 0.75	-	Spiral Tap	-	-	-	-	-

  From: ₹ 1,250.96
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Stainless Steels_SU+PO

  YAMAWA MFG

  Point tap for through-hole machining with extremely viscous or work-hardened work material.
  [Features]
  Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 10 m/min or less is recommended.
  [Applications]
  · Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	0.7 ～ 0.75	High-speed steel	Point tap	For through hole	5P	-	NA	52

  From: ₹ 890.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Roll Taps, Coated_R+V

  YAMAWA MFG

  A coating roll tap suitable for threading steel and nonferrous materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiN	Available	52

  From: ₹ 1,709.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Rolling Dies_MS-RS-D

  YAMAWA MFG

  Threading with plastic processing does not generate chips and produces high-precision threads with a clean finish without any problems or blade chipping troubles.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.5	High-speed steel	Die	-	-	-	NA	-

  From: ₹ 17,625.05
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Taps for Light Alloys_N-CT-LA

  YAMAWA MFG

  A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.5 ～ 0.7	Carbide	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	52 ～ 60

  From: ₹ 6,811.93
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series, X Performer Long Shank LT-S-XPF

  OSG

  [Specifications]
  · Shape: Roll tap
  · Screw type: metric
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.7	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	-	Other	Available	80 ～ 120

  From: ₹ 2,736.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Aluminum 1.5P_AL-SP-1.5P

  YAMAWA MFG

  [Features]
  · Eliminates scrap bite-in or blockages when cutting aluminum die casting or cast aluminum, as a tap for female thread cutting without tearing.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.7	High-speed steel	Spiral Tap	For blind hole	1.5P	Nitriding Treatment	Available	52

  From: ₹ 915.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taflet -S TFS

  NACHI(FUJIKOSHI)

  A roll type tap that does not expel chips.
  [Features]
  · The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
  · It does not produce chips and provides stable screw accuracy.
  · The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
  [Applications]
  · Ideal for rolled threading of non-ferrous metals such as aluminum.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	0.7	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	-	NA	52

  From: ₹ 974.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap TiN coated with Long Shank_TIN-LT-SFT

  OSG

  Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.7	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN	Available	100

  From: ₹ 2,983.18
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap V Coating V-SFT

  OSG

  Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.7	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Other	Available	52

  From: ₹ 1,805.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Spiral Tap_OT-SFT

  OSG

  Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.7	Carbide	Spiral Tap	For blind hole	1.5P ～ 2.5P	Non-Coated	NA	52

  From: ₹ 8,038.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap TiN coated_TIN-HT

  OSG

  Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7	Vanadium High-Speed Steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	TiN	Available	52

  From: ₹ 1,687.98
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid Die (For Stainless Steels) SUS-SD

  OSG

  [Specifications]
  · Shape: Die
  · Screw type: metric
  · Coating: Non-Coated
  · Tool material: HSS

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.7	High-speed steel	Die	-	-	Non-Coated	NA	-

  From: ₹ 5,767.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps for Left Hand Threads_PO-V

  YAMAWA MFG

  Coated point tap suitable for low carbon steel to high carbon steel machining.
  [Features]
  · Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
  [Applications]
  · Can process both synchronously and asynchronously.
  · Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7	High-speed steel	Point tap	For through hole	5P	TiN	Available	52

  From: ₹ 1,684.93
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P

  YAMAWA MFG

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	0.7	Powder high-speed steel	Spiral Tap	For through hole	5P	-	NA	52

  From: ₹ 1,453.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap Claw Tap 300 TiN Coating (for metal screws/coarse type)

  SANDVIK

  [Features]
  · A high-productivity tap tool.
  · Long tool life and excellent chip processing provide high stability.
  · TiN coating with high heat resistance ensures long service life even for work materials that are prone to heat buildup.
  · Taps are available for each work material, making selection easy.
  [Applications]
  · For blind hole machining.
  · Work materials: Steel.
  [Material]
  · High-Speed Steel (HSS-E)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.7	-	Spiral Tap	For blind hole	2.5P	TiN	Available	52

  From: ₹ 2,637.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Spiral Tap SGSP

  NACHI(FUJIKOSHI)

  [Features]
  ·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditions

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○/◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.5 ～ 0.7	Alloy HSS	Spiral Tap	For through hole / For blind hole	1.5 ～ 2.5	TiCN	Available	52

  From: ₹ 1,815.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Excel Hand Tap EHT

  NACHI(FUJIKOSHI)

  Carbide tap with a TiCN coating treatment applied to the carbide base metal.
  [Features]
  · Excellent abrasion resistance and adhesion resistance.
  · Improved chip discharge performance and service life.
  [Applications]
  · Ideal for mass tapping of aluminum and cast iron, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	0.7	Carbide	Hand Tap	For through hole / For blind hole	1.5P ～ 3P	TiCN	Available	52

  From: ₹ 11,675.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HR Coated Spiral Tap for Nickel Alloy_WHR-NI-SFT

  OSG

  A highly rigid cutting edge is realized by combining spiral taps with point grooves. Enables stable processing with a long service life for nickel base alloy (40 to 45 HRC) after aging treatment

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Nickel-based alloy (Inconel, etc.)[◎]	0.7	Powder high-speed steel	Spiral Tap	For through hole	2.5P	Other	Available	52

  From: ₹ 3,191.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap Short Chamfer type_EX-SC-SFT

  OSG

  Bite length of 1.5 peaks. Ideal for when the effective thread length cannot be obtained in a blind hole with general spiral taps of 2.5-thread biting length

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	0.7	Vanadium High-Speed Steel	Spiral Tap	For blind hole	1.5P	Non-Coated	NA	52

  From: ₹ 937.93
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT

  OSG

  Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 42 to 52 HRC. In order to maximize the properties of the base material, V coating with excellent abrasion resistance has been applied to the surface.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Quenched and tempered steel (45 to 55 HRC)[◎]	0.7	Powder high-speed steel	Hand Tap	For through hole / For blind hole	2.5P ～ 5P	TiCN	Available	52

  From: ₹ 4,433.00
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap V coated with Long Shank_V-LT-POT

  OSG

  Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.7	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiCN	Available	100

  From: ₹ 2,930.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for General Application (with OX)_EX-H-POT

  OSG

  For standard point taps, it is used when the protruding length of the screw is insufficient.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.7	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	52

  From: ₹ 908.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank・General Application_EX-LT-POT

  OSG

  For standard point taps, it is used when the protruding length of the screw is insufficient.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.7	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	150

  From: ₹ 3,466.71
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT

  OSG

  Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.7	Carbide	Roll tap	For through hole / For blind hole	2P	Non-Coated	NA	100

  From: ₹ 15,040.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap remover Plus (regular size)

  EIKOSHA

  Repair/removal tool: Drill for removing broken HSS taps.
  [Features]
  · A recovery drill that sharpens the center of a broken HSS tap.
  · As it does not damage the screw threads, re-tapping can be performed after removal.
  [Applications]
  · Used as a recovery tool when HSS taps are broken.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	-	-	-	Carbide	Modification/removal Tool	-	-	Other	Available	40

  From: ₹ 8,228.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap remover Plus (long size)

  EIKOSHA

  Drill dedicated for damaged HSS tap removal

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	-	-	-	Carbide	Modification/removal Tool	-	-	Other	Available	45

  From: ₹ 9,059.78
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for Stainless Steels_SU+SP

  YAMAWA MFG

  Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
  [Features]
  · For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
  · Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
  · Stable scrap is ejected and a good finish is realized.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 10 m/min or less is recommended.
  [Applications]
  Optimal for machining extremely viscous or work-hardened work material.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	0.7 ～ 0.75	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	52

  From: ₹ 872.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Stainless Steels, Through Hole Use（with LH Spiral Flutes）_SU+SL

  YAMAWA MFG

  A tap suitable for machining through holes, including viscous materials that have a high machining hardness such as stainless steel, chrome steel, and molybdenum steel.
  [Features]
  · Achieves a tool life triple or more that of SU-PO for SUS304.
  · Provides excellent finish and thread shape to female thread flanks even after 2,000 drilling.
  · By adopting inverse twisted spiral groove, the discharge of chips is improved and tool life is improved compared to SU-PO.
  [Applications]
  · Can process both synchronously and asynchronously.
  · Recommended for machining speeds of 5 to 15 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	0.7	High-speed steel	Spiral Tap	For through hole	5P	-	NA	52

  From: ₹ 873.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Pointed Taps, Coated_LS-PO-V

  YAMAWA MFG

  * LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7	High-speed steel	Point tap	For through hole	5P	TiN	Available	100

  From: ₹ 2,811.36
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL

  YAMAWA MFG

  Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7	High-speed steel	Spiral Tap	For through hole	5P	TiN	Available	52

  From: ₹ 1,963.53
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Speed Tapping_F-SP

  YAMAWA MFG

  Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7	High-speed steel	Spiral Tap	For blind hole	2.5P	TiN	Available	52

  From: ₹ 1,997.00
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Spiral Fluted Taps, Deep Hole Use_S-SP

  YAMAWA MFG

  Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	0.7	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	52

  From: ₹ 881.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Carbide Taps_N-CT-PO

  YAMAWA MFG

  Carbide point tap ideal for mass-production screw machining of aluminum casting (AC), aluminum die-casting (ADC), zinc die-casting (ZDC), etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7	Carbide	Point tap	For through hole	5P	-	NA	52

  From: ₹ 10,195.44
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for Tough Stainless Steels_SU2-SP

  YAMAWA MFG

  Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	0.7	High-speed steel	Spiral Tap	For blind hole	3P	-	NA	52

  From: ₹ 975.05
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Union Tool Screw Cutting Tool

  UNION TOOL

  [Features]
  · Thread cutting tool for machining carbide alloys and hard brittle materials. (Thread mill type)
  · Enables direct engraving, dramatically improving efficiency and precision of discharge and grinding.
  · Uses a newly developed diamond coating with ultra high hardness for toughness and adhesive strength.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	-	-	0.7	-	Thread-cutting-related tool	-	-	Other	Available	50

  From: ₹ 31,731.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Spiral Tap Long Shank SGSPL

  NACHI(FUJIKOSHI)

  [Applications]
  ·Used when standard dimension does not have enough tool runout length

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.5 ～ 0.7	Alloy HSS	Spiral Tap	For through hole / For blind hole	2.5	-	Available	-

  From: ₹ 3,099.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  N Point Tap Long Shank

  NACHI(FUJIKOSHI)

  [Features]
  ・ Used when the protrusion length is insufficient with standard size.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.7	High-speed steel	Point tap	For through hole	5	-	NA	150

  From: ₹ 1,781.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Speed Tapping_LS-F-SP

  YAMAWA MFG

  [Features]
  · A long-shank spiral tap for use in high-speed machining between 15 m/min and 25 m/min.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	0.7	High-speed steel	Spiral Tap	For blind hole	2.5P	-	Available	100

  From: ₹ 4,022.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	YAMAWA MFG	OSG	OSG	TANOI MFG	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	YAMAWA MFG	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	SANDVIK	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	EIKOSHA	EIKOSHA	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	UNION TOOL	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	YAMAWA MFG
Product Series	LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT	CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT	Solid Dies (for left-hand threads) D LH for Metric Threads	Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT	Grooveless Tap Series Carbide New Roll Tap OT-NRT	IT-Toughlet TiCN Coated	Spiral Flute Tap (SKH)	Spiral Pointed Taps for Stainless Steels_SU+PO	Roll Taps, Coated_R+V	Rolling Dies_MS-RS-D	Carbide Taps for Light Alloys_N-CT-LA	Grooveless Tap Series, X Performer Long Shank LT-S-XPF	Spiral Fluted Taps for Aluminum 1.5P_AL-SP-1.5P	Taflet -S TFS	Spiral Tap TiN coated with Long Shank_TIN-LT-SFT	Spiral Tap V Coating V-SFT	Tungsten Carbide Spiral Tap_OT-SFT	Straight Flutes Tap TiN coated_TIN-HT	Solid Die (For Stainless Steels) SUS-SD	Spiral Pointed Taps for Left Hand Threads_PO-V	Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P	Spiral Tap Claw Tap 300 TiN Coating (for metal screws/coarse type)	SG Spiral Tap SGSP	Excel Hand Tap EHT	HR Coated Spiral Tap for Nickel Alloy_WHR-NI-SFT	Spiral Tap Short Chamfer type_EX-SC-SFT	Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT	Pointed Tap V coated with Long Shank_V-LT-POT	Pointed Tap for General Application (with OX)_EX-H-POT	Long Shank・General Application_EX-LT-POT	Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT	Tap remover Plus (regular size)	Tap remover Plus (long size)	Spiral Fluted Taps for Stainless Steels_SU+SP	Spiral Fluted Taps for Stainless Steels, Through Hole Use（with LH Spiral Flutes）_SU+SL	Long Shank Spiral Pointed Taps, Coated_LS-PO-V	Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL	Spiral Fluted Taps for High Speed Tapping_F-SP	Short Spiral Fluted Taps, Deep Hole Use_S-SP	Spiral Pointed Carbide Taps_N-CT-PO	Spiral Fluted Taps for Tough Stainless Steels_SU2-SP	Union Tool Screw Cutting Tool	SG Spiral Tap Long Shank SGSPL	N Point Tap Long Shank	Spiral Fluted Taps for High Speed Tapping_LS-F-SP
From	₹ 1,259.38	₹ 2,592.07	₹ 5,483.45	₹ 12,381.71	₹ 9,528.80	₹ 2,136.31	₹ 1,250.96	₹ 890.87	₹ 1,709.42	₹ 17,625.05	₹ 6,811.93	₹ 2,736.73	₹ 915.16	₹ 974.00	₹ 2,983.18	₹ 1,805.85	₹ 8,038.05	₹ 1,687.98	₹ 5,767.78	₹ 1,684.93	₹ 1,453.22	₹ 2,637.62	₹ 1,815.98	₹ 11,675.33	₹ 3,191.00	₹ 937.93	₹ 4,433.00	₹ 2,930.95	₹ 908.45	₹ 3,466.71	₹ 15,040.40	₹ 8,228.60	₹ 9,059.78	₹ 872.31	₹ 873.05	₹ 2,811.36	₹ 1,963.53	₹ 1,997.00	₹ 881.29	₹ 10,195.44	₹ 975.05	₹ 31,731.93	₹ 3,099.13	₹ 1,781.16	₹ 4,022.60
Days to Ship	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	14 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	9 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	14 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more
Screw size (Nominal)	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	-	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	Meter	Meter	Meter
work material	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○/◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Quenched and tempered steel (45 to 55 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	-	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]
Pitch (P), Number of Threading(mm)	0.7	0.7	0.5 ～ 0.7	0.7	0.7	0.7	0.7 ～ 0.75	0.7 ～ 0.75	0.7	0.5	0.5 ～ 0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.5 ～ 0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	-	-	0.7 ～ 0.75	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.5 ～ 0.7	0.7	0.7
Tool Material Type	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	Carbide	Carbide	High-speed steel	-	High-speed steel	High-speed steel	High-speed steel	Carbide	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Powder high-speed steel	-	Alloy HSS	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	High-speed steel	-	Alloy HSS	High-speed steel	High-speed steel
Tap Type	Point tap	Roll tap	Die	Hand Tap	Roll tap	Roll tap	Spiral Tap	Point tap	Roll tap	Die	Hand Tap	Roll tap	Spiral Tap	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Die	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Spiral Tap	Spiral Tap	Hand Tap	Point tap	Point tap	Point tap	Roll tap	Modification/removal Tool	Modification/removal Tool	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Thread-cutting-related tool	Spiral Tap	Point tap	Spiral Tap
Hole type	For through hole	For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	-	-	For through hole	For through hole / For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	-	For through hole	For through hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole / For blind hole	-	-	For blind hole	For through hole	For through hole	For through hole	For blind hole	For blind hole	For through hole	For blind hole	-	For through hole / For blind hole	For through hole	For blind hole
Chamfer threads (Lcf)	6P	2P ～ 4P	-	1.5P ～ 3P	2P	1P ～ 4P	-	5P	2P ～ 4P	-	1.5P ～ 5P	-	1.5P	2P ～ 4P	2.5P	2.5P	1.5P ～ 2.5P	1.5P ～ 5P	-	5P	5P	2.5P	1.5 ～ 2.5	1.5P ～ 3P	2.5P	1.5P	2.5P ～ 5P	5P	5P	5P	2P	-	-	2.5P	5P	5P	5P	2.5P	2.5P	5P	3P	-	2.5	5	2.5P
Coating Type	Non-Coated	TiCN	-	Non-Coated	Non-Coated	TiCN	-	-	TiN	-	-	Other	Nitriding Treatment	-	TiN	Other	Non-Coated	TiN	Non-Coated	TiN	-	TiN	TiCN	TiCN	Other	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Other	Other	-	-	TiN	TiN	TiN	-	-	-	Other	-	-	-
Coating Y/N	NA	Available	NA	NA	NA	Available	-	NA	Available	NA	NA	Available	Available	NA	Available	Available	NA	Available	NA	Available	NA	Available	Available	Available	Available	NA	Available	Available	NA	NA	NA	Available	Available	NA	NA	Available	Available	Available	NA	NA	NA	Available	Available	NA	Available
Overall Length (L)(mm)	52	80 ～ 120	-	100	52	52	-	52	52	-	52 ～ 60	80 ～ 120	52	52	100	52	52	52	-	52	52	52	52	52	52	52	52	100	52	150	100	40	45	52	52	100	52	52	52	52	52	50	-	150	100

Loading...