Screw-Hole-Related Tools（Screw size (Nominal)：M1.7）

• You can add up to 6 items per a category to the compare list. Compare

  

  Model A Tap Series, Spiral Tap A-SFT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.35	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	Other	Available	36

  From: ₹ 4,108.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps_HT

  YAMAWA MFG

  Hand tap used for general tapping work.
  [Features]
  ・ High blade tip strength makes it easy for regrinding.
  ・ More suitable for manual work compared to taps of other shapes.
  ・ 2 types are available, with 5P or 1.5P chamfered threads.
  ・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
  ・ Machining with mechanical machinery is also possible.
  ・ Has straight grooves out of consideration for cutting chip stow.
  ・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
  [Applications]
  ・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.2 ～ 0.35	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	36

  From: ₹ 1,497.42
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Model A Tap Series, Pointed Tap A-POT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	0.35	Powder high-speed steel	Point tap	For through hole	5P	Other	Available	36

  From: ₹ 4,022.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Taps for Light Alloys_N-CT-FC

  YAMAWA MFG

  A carbide tap suitable for thread machining of hard and brittle material such as cast iron.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]	0.35	Carbide	Hand Tap	For through hole / For blind hole	1.5P ～ 3P	-	NA	36

  From: ₹ 10,123.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.35	Powder high-speed steel	Roll tap	For blind hole	1P	TiCN	Available	36

  From: ₹ 2,527.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Roll Taps for Dry Tapping, Coated_OL+RZ

  YAMAWA MFG

  It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.35	Powder high-speed steel	Roll tap	For through hole	4P	TiCN	Available	36

  From: ₹ 2,282.09
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

  OSG

  Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.35	Vanadium High-Speed Steel	Roll tap	For blind hole	2P ～ 4P	TiN	Available	36

  From: ₹ 2,081.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap TiN Coating TIN-SFT

  OSG

  Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.35	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN	Available	36

  From: ₹ 2,716.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless Tap (X Performer)_S-XPF

  OSG

  There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
  * M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.35	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiCN	Available	36

  From: ₹ 4,168.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Straight Flutes Tap_OTT

  OSG

  Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	0.35	Carbide	Hand Tap	For through hole / For blind hole	1.5P ～ 3P	Non-Coated	NA	36

  From: ₹ 8,622.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap Series TiN Coating TIN-POT

  OSG

  Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.35	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	36

  From: ₹ 2,675.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.35	Powder high-speed steel	Roll tap	For blind hole	2P ～ 4P	TiCN	Available	36

  From: ₹ 2,255.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D

  YAMAWA MFG

  Solid die for difficult-to-cut materials, such as stainless steel, etc.
  [Features]
  · Adopts high-speed tool steel (HSS).
  · Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.
  · The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.
  · Stable male threading can be performed.
  · Solid type with minimal variation even under harsh cutting condition specifications.
  [Applications]
  · Optimal for machining stainless steel and other difficult-to-cut materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	-	0.35	High-speed steel	Die	-	-	-	NA	-

  From: ₹ 6,648.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid Dies (for left-hand threads) D LH for Metric Threads

  YAMAWA MFG

  Solid die for left-handed threads with improved die runout precision.
  [Features]
  · High-speed tool steel (HSS) is adopted, realizing stable machining.
  · The front surface is the surface with a marking on the chamfering.
  · The rear is sunk so that the end face makes close contact when the holder is attached.
  · Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
  · Enables hand turned use or use with machinery.
  · Solves problems particular to adjustable type dies, realizing high precision male screw machining.
  [Applications]
  · Ideal for male thread machining with iron or light metals.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	-	0.35	High-speed steel	Die	-	-	-	NA	-

  From: ₹ 9,204.29
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.35	Powder high-speed steel	Roll tap	For blind hole	2P ～ 4P	TiCN	Available	60

  From: ₹ 3,212.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Stainless Steels_SU+PO

  YAMAWA MFG

  Point tap for through-hole machining with extremely viscous or work-hardened work material.
  [Features]
  Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 10 m/min or less is recommended.
  [Applications]
  · Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	0.35	High-speed steel	Point tap	For through hole	5P	-	NA	36

  From: ₹ 2,295.69
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Roll Taps, Coated_R+V

  YAMAWA MFG

  A coating roll tap suitable for threading steel and nonferrous materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.35	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiN	Available	36

  From: ₹ 2,199.05
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid Die D for Metric Threads

  YAMAWA MFG

  Solid die with improved die runout precision.
  [Features]
  · High-speed tool steel (HSS) is adopted, realizing stable machining.
  · The front surface is the surface with a marking on the chamfering.
  · The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
  · Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
  · Solves problems particular to adjustable type dies, realizing high precision screw machining.
  [Applications]
  · Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
  · Combining with NC tooling enables machining with a MC.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	-	0.2 ～ 0.35	High-speed steel	Die	-	-	-	NA	-

  From: ₹ 5,467.38
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Rolling Dies_MS-RS-D

  YAMAWA MFG

  Threading with plastic processing does not generate chips and produces high-precision threads with a clean finish without any problems or blade chipping troubles.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	-	0.35	High-speed steel	Die	-	-	-	NA	-

  From: ₹ 12,004.96
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap Short Chamfer type_EX-SC-SFT

  OSG

  Bite length of 1.5 peaks. Ideal for when the effective thread length cannot be obtained in a blind hole with general spiral taps of 2.5-thread biting length

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	0.35	Vanadium High-Speed Steel	Spiral Tap	For blind hole	1.5P	Non-Coated	NA	36

  From: ₹ 1,813.89
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap Series, General Purpose EX-POT

  OSG

  For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.35	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	36

  From: ₹ 1,876.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IT-Toughlet TiCN Coated

  TANOI MFG

  Rise tap with a correct bite without pitch or angle errors.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.2 ～ 0.35	High-speed steel	Roll tap	-	1P ～ 4P	TiCN	Available	36

  From: ₹ 2,956.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for Stainless Steels_SU+SP

  YAMAWA MFG

  Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
  [Features]
  · For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
  · Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
  · Stable scrap is ejected and a good finish is realized.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 10 m/min or less is recommended.
  [Applications]
  Optimal for machining extremely viscous or work-hardened work material.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	0.35	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	36

  From: ₹ 2,401.51
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Performance Roll Taps, Coated_HP+RZ

  YAMAWA MFG

  It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	unified	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.35	Powder high-speed steel	Roll tap	For through hole / For blind hole	2P	TiCN	Available	36

  From: ₹ 2,282.09
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Taps for Light Alloys_N-CT-LA

  YAMAWA MFG

  A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.35	Carbide	Hand Tap	For through hole / For blind hole	1.5P ～ 3P	-	NA	36

  From: ₹ 10,123.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.35	Powder high-speed steel	Roll tap	For blind hole	2P	TiCN	Available	36

  From: ₹ 2,527.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Point Tap SGPO

  NACHI(FUJIKOSHI)

  [Features]
  ・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.
  

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.35	High-speed steel	Point tap	For through hole	5	TiCN	Available	36

  From: ₹ 2,862.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taflet for Steel TFST

  NACHI(FUJIKOSHI)

  A rise up type tap that does not expel chips.
  [Features]
  · The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
  · It does not produce chips.
  · Less inconsistent screw precision.
  · The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
  [Applications]
  · Suitable for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○]	0.35	High-speed steel	Roll tap	For through hole	4P	-	NA	36

  From: ₹ 1,370.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taflet -L TFL

  NACHI(FUJIKOSHI)

  A roll type tap that does not expel chips.
  [Features]
  · The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
  · It does not produce chips and provides stable screw accuracy.
  · The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
  [Applications]
  · Ideal for rolled threading of non-ferrous metals such as aluminum.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	0.35	High-speed steel	Roll tap	For through hole	4P	-	NA	36

  From: ₹ 1,634.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taflet -S TFS

  NACHI(FUJIKOSHI)

  A roll type tap that does not expel chips.
  [Features]
  · The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
  · It does not produce chips and provides stable screw accuracy.
  · The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
  [Applications]
  · Ideal for rolled threading of non-ferrous metals such as aluminum.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	0.35	High-speed steel	Roll tap	For through hole	4P	-	NA	36

  From: ₹ 1,347.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IT-Toughlet C Coated

  TANOI MFG

  Rise tap with a correct bite without pitch or angle errors.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]	0.2 ～ 0.35	High-speed steel	Roll tap	-	1P ～ 4P	Other	Available	36

  From: ₹ 2,956.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

  YAMAWA MFG

  The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.35	Powder high-speed steel	Roll tap	For blind hole	1P	TiCN	Available	36

  From: ₹ 2,566.00
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps for High Carbon Steels_HC+PO

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	0.35	High-speed steel	Point tap	For through hole	5P	-	NA	36

  From: ₹ 1,593.64
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SU Roll Taps_SURZ

  YAMAWA MFG

  [Features]
  · A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
  · The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
  · Demonstrates effectiveness for roll tap machining of stainless steel.
  · Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.7	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.35	Powder high-speed steel	Roll tap	For blind hole	2P	Other	Available	36

  From: ₹ 2,879.82
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	YAMAWA MFG	OSG	YAMAWA MFG	OSG	YAMAWA MFG	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	TANOI MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	TANOI MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Model A Tap Series, Spiral Tap A-SFT	Hand Taps_HT	Model A Tap Series, Pointed Tap A-POT	Carbide Taps for Light Alloys_N-CT-FC	CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT	Roll Taps for Dry Tapping, Coated_OL+RZ	Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT	Spiral Tap TiN Coating TIN-SFT	Fluteless Tap (X Performer)_S-XPF	Tungsten Carbide Straight Flutes Tap_OTT	Pointed Tap Series TiN Coating TIN-POT	CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT	HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D	Solid Dies (for left-hand threads) D LH for Metric Threads	CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT	Spiral Pointed Taps for Stainless Steels_SU+PO	Roll Taps, Coated_R+V	Solid Die D for Metric Threads	Rolling Dies_MS-RS-D	Spiral Tap Short Chamfer type_EX-SC-SFT	Pointed Tap Series, General Purpose EX-POT	IT-Toughlet TiCN Coated	Spiral Fluted Taps for Stainless Steels_SU+SP	High Performance Roll Taps, Coated_HP+RZ	Carbide Taps for Light Alloys_N-CT-LA	CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT	SG Point Tap SGPO	Taflet for Steel TFST	Taflet -L TFL	Taflet -S TFS	IT-Toughlet C Coated	Torqueless Roll Taps with Short Chamfer_SC-TL-RZ	Spiral Pointed Taps for High Carbon Steels_HC+PO	SU Roll Taps_SURZ
From	₹ 4,108.00	₹ 1,497.42	₹ 4,022.00	₹ 10,123.11	₹ 2,527.78	₹ 2,282.09	₹ 2,081.76	₹ 2,716.64	₹ 4,168.00	₹ 8,622.04	₹ 2,675.13	₹ 2,255.89	₹ 6,648.73	₹ 9,204.29	₹ 3,212.22	₹ 2,295.69	₹ 2,199.05	₹ 5,467.38	₹ 12,004.96	₹ 1,813.89	₹ 1,876.84	₹ 2,956.02	₹ 2,401.51	₹ 2,282.09	₹ 10,123.11	₹ 2,527.78	₹ 2,862.05	₹ 1,370.00	₹ 1,634.00	₹ 1,347.00	₹ 2,956.02	₹ 2,566.00	₹ 1,593.64	₹ 2,879.82
Days to Ship	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Screw size (Nominal)	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○]	Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
Pitch (P), Number of Threading(mm)	0.35	0.2 ～ 0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.2 ～ 0.35	0.35	0.35	0.35	0.2 ～ 0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.2 ～ 0.35	0.35	0.35	0.35
Tool Material Type	Powder high-speed steel	High-speed steel	Powder high-speed steel	Carbide	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Powder high-speed steel	Carbide	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	Powder high-speed steel
Tap Type	Spiral Tap	Hand Tap	Point tap	Hand Tap	Roll tap	Roll tap	Roll tap	Spiral Tap	Roll tap	Hand Tap	Point tap	Roll tap	Die	Die	Roll tap	Point tap	Roll tap	Die	Die	Spiral Tap	Point tap	Roll tap	Spiral Tap	Roll tap	Hand Tap	Roll tap	Point tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Point tap	Roll tap
Hole type	For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For blind hole	-	-	For blind hole	For through hole	For through hole / For blind hole	-	-	For blind hole	For through hole	-	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole	For through hole	For through hole	-	For blind hole	For through hole	For blind hole
Chamfer threads (Lcf)	2.5P	1.5P ～ 5P	5P	1.5P ～ 3P	1P	4P	2P ～ 4P	2.5P	2P ～ 4P	1.5P ～ 3P	5P	2P ～ 4P	-	-	2P ～ 4P	5P	2P ～ 4P	-	-	1.5P	5P	1P ～ 4P	2.5P	2P	1.5P ～ 3P	2P	5	4P	4P	4P	1P ～ 4P	1P	5P	2P
Coating Type	Other	-	Other	-	TiCN	TiCN	TiN	TiN	TiCN	Non-Coated	TiN	TiCN	-	-	TiCN	-	TiN	-	-	Non-Coated	Non-Coated	TiCN	-	TiCN	-	TiCN	TiCN	-	-	-	Other	TiCN	-	Other
Coating Y/N	Available	NA	Available	NA	Available	Available	Available	Available	Available	NA	Available	Available	NA	NA	Available	NA	Available	NA	NA	NA	NA	Available	NA	Available	NA	Available	Available	NA	NA	NA	Available	Available	NA	Available
Overall Length (L)(mm)	36	36	36	36	36	36	36	36	36	36	36	36	-	-	60	36	36	-	-	36	36	36	36	36	36	36	36	36	36	36	36	36	36	36

Loading...