Screw-Hole-Related Tools（work material：Low-Carbon Steel (carbon alloy less than 0.25%) Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series NC Planet Cutter WX-PNC

  OSG

  If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / unified / Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1 ～ 28	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	60 ～ 120

  From: ₹ 21,469.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

  OSG

  Enables efficient chip discharge by discharging cutting fluid from the oil holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 3	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	60 ～ 120

  From: ₹ 22,756.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap Series V Coating V-POT

  OSG

  Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M5 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.8 ～ 1.25	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiCN	Available	60 ～ 75

  From: ₹ 1,805.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	55 ～ 95

  From: ₹ 3,152.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pipe Thread Tap for General Application (with OX)_H-SPT

  OSG

  This is a general-purpose steam oxide treatment power strip used for machining the female threads of parallel pipe threads.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  G1/2	Parallel for Pipes	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	14	High-speed steel	Tap for pipes	For through hole / For blind hole	4P	Non-Coated	NA	80

  From: ₹ 6,276.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.2UN ～ M3	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.25 ～ 56	Powder high-speed steel	Roll tap	For blind hole	2P	TiCN	Available	30 ～ 46

  From: ₹ 2,104.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap for Steel HRT

  OSG

  Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M3.5	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.3 ～ 0.6	High-speed steel	Roll tap	For blind hole	2.5P	Non-Coated	NA	34 ～ 48

  From: ₹ 1,002.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series Carbide New Roll Tap OT-NRT

  OSG

  Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 1.75	Carbide	Roll tap	For through hole / For blind hole	2P	Non-Coated	NA	46 ～ 82

  From: ₹ 9,010.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tire Valve Thread

  SKC

  [Applications]
  It can be used to tap threaded holes in tire valves.
  [Features]
  High speed steel with excellent heat resistance and thermal damage resistance is used.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  TV8	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	32	High-speed steel	Point tap	For blind hole	-	Non-Coated	NA	70

  From: ₹ 2,851.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Hand Tap, for Metric Fine Threads (Angle: 60°)

  SKC

  [Applications]
  It can be used for engraving thread grooves of fine threads.
  [Features]
  For right-hand threads.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M13	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5	-	Hand Tap	-	5P	-	-	-

  From: ₹ 3,941.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Hand Tap【3 Pieces Per Package】

  ISHIHASHI

  Tap Used for General Screw Thread Cutting

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1.75	-	Hand Tap	-	-	Non-Coated	NA	40 ～ 82

  From: ₹ 457.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps_SP

  YAMAWA MFG

  The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
  [Features]
  ・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
  ・ Intermittent cutting of female threads with keyway is also possible.
  ・ Capable of machining both synchronously and asynchronously.
  ・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
  ・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
  ・ The tap can easily cut.
  ・ Intermittent cutting of pilot holes with keyway is also possible.
  ・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
  [Applications]
  ・ Ideal for machining blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 1/4 ～ M36	Meter / Whitworth	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	4 ～ 7	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	145 ～ 155

  From: ₹ 17,923.73
  Days to Ship: 5 Day(s)

  5 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps for Left Hand Threads_PO-V

  YAMAWA MFG

  Coated point tap suitable for low carbon steel to high carbon steel machining.
  [Features]
  · Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
  [Applications]
  · Can process both synchronously and asynchronously.
  · Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 1.75	High-speed steel	Point tap	For through hole	5P	TiN	Available	46 ～ 82

  From: ₹ 1,684.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Roll Taps, Coated_R+V

  YAMAWA MFG

  A coating roll tap suitable for threading steel and nonferrous materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.25 ～ 1	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiN	Available	36 ～ 62

  From: ₹ 1,701.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Plus Series Spiral Fluted Taps_+SP

  YAMAWA MFG

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
  [Features]
  · Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
  [Applications]
  · Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 62

  From: ₹ 769.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps_PO

  YAMAWA MFG

  A point tap convenient for through-hole machining as scraps are ejected forward.
  [Features]
  · Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
  · Minimal scrap issues.
  · Low cutting torque.
  · Capable of machining both synchronously and asynchronously.
  [Applications]
  · Ideal for machining through-holes.
  * N-PO models will transition to PO as soon as stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.6 ～ M1.4	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.3 ～ 32	High-speed steel	Point tap	For through hole	5P	-	NA	36 ～ 52

  From: ₹ 883.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Thread Mills for Metric Internal Threads_MC-CSLC

  YAMAWA MFG

  A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  06510X28R ～ 200505N300M	Meter / Taper for Pipe / Parallel for Pipes	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 3	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	50 ～ 140

  From: ₹ 28,926.85
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series, X Performer Long Shank LT-S-XPF

  OSG

  [Specifications]
  · Shape: Roll tap
  · Screw type: metric
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 1.75	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	-	Other	Available	80 ～ 150

  From: ₹ 2,736.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes Interlap Type (PT) EX-IRT-PT

  OSG

  [Specifications]
  · Shape: Pipe tap
  · Screw type: pipe taper
  · Coating: Non-Coated
  · Work Material: Low-Carbon Steel (less than 0.25% carbon alloy) [○] / Stainless Steel (SUS) [◎] / Cast Steel (SC) [○]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R7/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	55 ～ 95

  From: ₹ 2,683.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated with Long Shank_TIN-LT-TPT

  OSG

  [Specifications]
  · Shape: Pipe tap
  · Screw type: pipe taper
  · Coating: TiN
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [○] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Tempered Steel (25 to 35HRC) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  Rc1/2 ～ Rc3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	14 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	100 ～ 150

  From: ₹ 5,051.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hyper Z Spiral Tap ZSP

  NACHI(FUJIKOSHI)

  [Features]
  ・ A high performance general purpose tap with long life and little variation over a wide range of machining work.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3.5 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.35 ～ 3	High-speed steel	Spiral Tap	For through hole / For blind hole	2.5	-	NA	48 ～ 120

  From: ₹ 1,320.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taflet for Steel TFST

  NACHI(FUJIKOSHI)

  A rise up type tap that does not expel chips.
  [Features]
  · The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
  · It does not produce chips.
  · Less inconsistent screw precision.
  · The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
  [Applications]
  · Suitable for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.3 ～ 1.5	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	-	NA	34 ～ 75

  From: ₹ 1,066.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank for Taflet Steel TFSTL

  NACHI(FUJIKOSHI)

  A roll type tap that does not expel chips.
  [Features]
  · The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
  [Applications]
  · Ideal for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.
  · For standard dimensions, it is convenient when the protrusion length is insufficient.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 1.5	High-speed steel	Roll tap	For blind hole	2P	-	NA	70 ～ 150

  From: ₹ 1,604.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT

  OSG

  Achieves female threading of stainless steel with a water-soluble cutting fluid.
  Tool Material: Vanadium high-speed steel
  Hole type: For blind holes
  Work material: General steel / stainless steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN	Available	40 ～ 62

  From: ₹ 1,819.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap V Coating V-SFT

  OSG

  Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Other	Available	46 ～ 95

  From: ₹ 1,805.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	TiN	Available	100 ～ 150

  From: ₹ 3,516.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT

  OSG

  Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.6 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.45 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	44 ～ 75

  From: ₹ 945.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Tap for General Use Oxidized H-HT

  OSG

  Steam oxide treatment is applied to prevent welding.
  Tool Material: Vanadium high-speed steel
  Work material: Steel alloy (SCM) compatible

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	1.5	Vanadium High-Speed Steel	Hand Tap	For through hole / For blind hole	1.5P	Non-Coated	NA	95

  From: ₹ 3,252.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap TiN coated with Long Shank_TIN-LT-POT

  OSG

  Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 3	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	100 ～ 200

  From: ₹ 2,423.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap V coated with Long Shank_V-LT-POT

  OSG

  Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.7 ～ 1	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiCN	Available	100

  From: ₹ 2,472.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap_HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	46 ～ 88

  From: ₹ 2,119.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	46 ～ 88

  From: ₹ 2,306.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for Thin Plate EX-SS-POT

  OSG

  Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.4 ～ 1.75	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	40 ～ 82

  From: ₹ 868.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 4,381.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 3,394.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank・with Interrupted Threads_EX-LT-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	120 ～ 150

  From: ₹ 5,372.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	120 ～ 150

  From: ₹ 5,604.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Tap for Pipes New Roll Tap NRT-SPT

  OSG

  [Features]A new forming tap with overall lengths of 65 mm and 80 mm.
  [Applications]It can be used for side mounting of pipe screws and machining of deep holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  PF3/8	Parallel for Pipes	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	19	High-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	65

  From: ₹ 5,945.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT

  OSG

  Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 1.75	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiN	Available	80 ～ 150

  From: ₹ 2,592.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  S0.5 ～ S0.9	Miniature	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	.02 ～ 0.225	Powder high-speed steel	Roll tap	For blind hole	2P	CrN	Available	30

  From: ₹ 3,356.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.2UN ～ M12	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.25 ～ 56	Powder high-speed steel	Roll tap	For blind hole	2P ～ 4P	TiCN	Available	60 ～ 200

  From: ₹ 2,592.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT

  OSG

  Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.7 ～ 1	Vanadium High-Speed Steel	Roll tap	For through hole	8P	TiCN	Available	52 ～ 62

  From: ₹ 2,253.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Tap for Steels_NRT

  OSG

  Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.2 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.25 ～ 1.25	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	Non-Coated	NA	32 ～ 75

  From: ₹ 1,047.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACHINING CENTER Tap (Normal Length)_EX-S-MCT

  OSG

  Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	1.25	Vanadium High-Speed Steel	Thread-cutting-related tool	For through hole / For blind hole	3P	Non-Coated	NA	70

  From: ₹ 1,374.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACHINING CENTER Tap with Long Shank_EX-MCT

  OSG

  Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	1.5	Vanadium High-Speed Steel	Thread-cutting-related tool	For through hole / For blind hole	3P	Non-Coated	NA	150

  From: ₹ 3,581.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SKC	SKC	ISHIHASHI	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Planet Cutter Series NC Planet Cutter WX-PNC	Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC	Pointed Tap Series V Coating V-POT	Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT	Parallel Pipe Thread Tap for General Application (with OX)_H-SPT	CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT	Grooveless Tap for Steel HRT	Grooveless Tap Series Carbide New Roll Tap OT-NRT	Tire Valve Thread	Hand Tap, for Metric Fine Threads (Angle: 60°)	Hand Tap【3 Pieces Per Package】	Spiral Fluted Taps_SP	Spiral Pointed Taps for Left Hand Threads_PO-V	Roll Taps, Coated_R+V	Plus Series Spiral Fluted Taps_+SP	Spiral Pointed Taps_PO	Carbide Thread Mills for Metric Internal Threads_MC-CSLC	Grooveless Tap Series, X Performer Long Shank LT-S-XPF	Taper Tap for Pipes Interlap Type (PT) EX-IRT-PT	Taper Pipe Thread Tap TiN coated with Long Shank_TIN-LT-TPT	Hyper Z Spiral Tap ZSP	Taflet for Steel TFST	Long Shank for Taflet Steel TFSTL	Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT	Spiral Tap V Coating V-SFT	Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT	Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT	Hand Tap for General Use Oxidized H-HT	Pointed Tap TiN coated with Long Shank_TIN-LT-POT	Pointed Tap V coated with Long Shank_V-LT-POT	LH Spiral SYNCHRO Tap_HS-RFT	LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT	Pointed Tap for Thin Plate EX-SS-POT	Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT	Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT	Long Shank・with Interrupted Threads_EX-LT-IRT	Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT	Parallel Tap for Pipes New Roll Tap NRT-SPT	Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT	UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT	CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT	Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT	Fluteless (Nu-Roll) Tap for Steels_NRT	MACHINING CENTER Tap (Normal Length)_EX-S-MCT	MACHINING CENTER Tap with Long Shank_EX-MCT
From	₹ 21,469.49	₹ 22,756.65	₹ 1,805.85	₹ 3,152.22	₹ 6,276.75	₹ 2,104.55	₹ 1,002.22	₹ 9,010.45	₹ 2,851.55	₹ 3,941.80	₹ 1,372.85	₹ 17,923.73	₹ 1,684.93	₹ 1,701.49	₹ 769.36	₹ 883.02	₹ 28,926.85	₹ 2,736.73	₹ 2,683.16	₹ 5,051.20	₹ 1,320.95	₹ 1,066.00	₹ 1,604.00	₹ 1,819.25	₹ 1,805.85	₹ 3,516.25	₹ 945.96	₹ 3,252.40	₹ 2,423.31	₹ 2,472.87	₹ 2,119.27	₹ 2,306.78	₹ 868.27	₹ 4,381.51	₹ 3,394.38	₹ 5,372.65	₹ 5,604.38	₹ 5,945.93	₹ 2,592.07	₹ 3,356.87	₹ 2,592.07	₹ 2,253.22	₹ 1,047.76	₹ 1,374.56	₹ 3,581.89
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s)	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Screw size (Nominal)	-	-	M5 ～ M10	R1 ～ R3/8	G1/2	No.2UN ～ M3	M1.4 ～ M3.5	M3 ～ M12	TV8	M13	M2 ～ M12	1 1/4 ～ M36	M3 ～ M12	M1 ～ M6	M2 ～ M6	No.6 ～ M1.4	06510X28R ～ 200505N300M	M3 ～ M12	R1 ～ R7/8	Rc1/2 ～ Rc3/8	M3.5 ～ M24	M1.4 ～ M10	M3 ～ M10	M2 ～ M6	M3 ～ M16	M3 ～ M10	M2.6 ～ M10	M16	M3 ～ M24	M4 ～ M6	M3 ～ M14	M3 ～ M14	M2 ～ M12	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	PF3/8	M3 ～ M12	S0.5 ～ S0.9	No.2UN ～ M12	M4 ～ M6	M1.2 ～ M10	M8	M10 ～ M12
Screw Types	Meter / unified / Taper for Pipe	Meter	Meter	Taper for Pipe	Parallel for Pipes	Meter / unified	Meter	Meter	-	Meter	Meter	Meter / Whitworth	Meter	Meter	Meter	Meter / unified	Meter / Taper for Pipe / Parallel for Pipes	Meter	Taper for Pipe	Taper for Pipe	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Parallel for Pipes	Meter	Miniature	Meter / unified	Meter	Meter	Meter	Meter
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]
Pitch (P), Number of Threading(mm)	1 ～ 28	0.5 ～ 3	0.8 ～ 1.25	11 ～ 28	14	0.25 ～ 56	0.3 ～ 0.6	0.5 ～ 1.75	32	0.5	0.4 ～ 1.75	4 ～ 7	0.5 ～ 1.75	0.25 ～ 1	0.4 ～ 1	0.3 ～ 32	0.5 ～ 3	0.5 ～ 1.75	11 ～ 28	14 ～ 28	0.35 ～ 3	0.3 ～ 1.5	0.5 ～ 1.5	0.4 ～ 1	0.5 ～ 2	0.5 ～ 1.5	0.45 ～ 1.5	1.5	0.5 ～ 3	0.7 ～ 1	0.5 ～ 2	0.5 ～ 2	0.4 ～ 1.75	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	19	0.5 ～ 1.75	.02 ～ 0.225	0.25 ～ 56	0.7 ～ 1	0.25 ～ 1.25	1.25	1.5
Tool Material Type	Carbide	Carbide	Vanadium High-Speed Steel	Carbide	High-speed steel	Powder high-speed steel	High-speed steel	Carbide	High-speed steel	-	-	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Carbide	Carbide	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel
Tap Type	Thread cutter	Thread cutter	Point tap	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Point tap	Hand Tap	Hand Tap	Spiral Tap	Point tap	Roll tap	Spiral Tap	Point tap	Thread cutter	Roll tap	Tap for pipes	Tap for pipes	Spiral Tap	Roll tap	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Point tap	Point tap	Point tap	Point tap	Point tap	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Thread-cutting-related tool	Thread-cutting-related tool
Hole type	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	-	-	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole
Chamfer threads (Lcf)	-	-	5P	2.5P	4P	2P	2.5P	2P	-	5P	-	2.5P	5P	2P ～ 4P	2.5P	5P	-	-	2.5P	2.5P	2.5	2P ～ 4P	2P	2.5P	2.5P	3P	2.5P	1.5P	5P	5P	6P	5P	5P	2.5P	2.5P	2.5P	2.5P	2.5P	2P ～ 4P	2P	2P ～ 4P	8P	2P ～ 4P	3P	3P
Coating Type	TiAlN	TiAlN	TiCN	Non-Coated	Non-Coated	TiCN	Non-Coated	Non-Coated	Non-Coated	-	Non-Coated	-	TiN	TiN	-	-	TiAlN	Other	Non-Coated	TiN	-	-	-	TiN	Other	TiN	Non-Coated	Non-Coated	TiN	TiCN	TiN	TiN	Non-Coated	TiN	TiN	Non-Coated	Non-Coated	Non-Coated	TiN	CrN	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated
Coating Y/N	Available	Available	Available	NA	NA	Available	NA	NA	NA	-	NA	NA	Available	Available	NA	NA	Available	Available	NA	Available	NA	NA	NA	Available	Available	Available	NA	NA	Available	Available	Available	Available	NA	Available	Available	NA	NA	NA	Available	Available	Available	Available	NA	NA	NA
Overall Length (L)(mm)	60 ～ 120	60 ～ 120	60 ～ 75	55 ～ 95	80	30 ～ 46	34 ～ 48	46 ～ 82	70	-	40 ～ 82	145 ～ 155	46 ～ 82	36 ～ 62	42 ～ 62	36 ～ 52	50 ～ 140	80 ～ 150	55 ～ 95	100 ～ 150	48 ～ 120	34 ～ 75	70 ～ 150	40 ～ 62	46 ～ 95	100 ～ 150	44 ～ 75	95	100 ～ 200	100	46 ～ 88	46 ～ 88	40 ～ 82	55 ～ 95	55 ～ 95	120 ～ 150	120 ～ 150	65	80 ～ 150	30	60 ～ 200	52 ～ 62	32 ～ 75	70	150

Loading...