Screw-Hole-Related Tools（work material：Low-Carbon Steel (carbon alloy less than 0.25%) Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT

  OSG

  Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 1.75	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiN	Available	80 ～ 150

  From: ₹ 2,592.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  S0.5 ～ S0.9	Miniature	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	.02 ～ 0.225	Powder high-speed steel	Roll tap	For blind hole	2P	CrN	Available	30

  From: ₹ 3,356.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT

  OSG

  Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	1	Vanadium High-Speed Steel	Roll tap	For through hole	8P	TiCN	Available	62

  From: ₹ 2,372.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap for Steel HRT

  OSG

  Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M3.5	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.3 ～ 0.6	High-speed steel	Roll tap	For blind hole	2.5P	Non-Coated	NA	34 ～ 48

  From: ₹ 1,002.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACHINING CENTER Tap with Long Shank_EX-MCT

  OSG

  Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	1.5	Vanadium High-Speed Steel	Thread-cutting-related tool	For through hole / For blind hole	3P	Non-Coated	NA	150

  From: ₹ 3,581.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Re-threading Die For Gas Pipe (PS Screw)

  TRUSCO NAKAYAMA

  [Features]
  · Used when cleaning out bolts/screws.
  · To be used when modifying screw threads.
  · Work can be done using a monkey wrench.
  · This product can be used in place of a round die when modifying the screw thread ridges.
  [Applications]
  · For fixing PS (straight) threads.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1/2	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	14	Alloy HSS	Die	-	-	-	-	-

  From: ₹ 4,320.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IT-Toughlet C Coated

  TANOI MFG

  Rise tap with a correct bite without pitch or angle errors.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.2 ～ 1.5	High-speed steel	Roll tap	-	1P ～ 4P	Other	Available	30 ～ 75

  From: ₹ 2,076.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long seamless TAFLET

  TANOI MFG

  Cold-forming tap with correct chamfer without pitch and angle errors.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.7 ～ 1	High-speed steel	Roll tap	-	1P ～ 2P	TiCN	Available	70 ～ 120

  From: ₹ 4,306.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C.T.G Thick Steel Cable Conduits Screw Tap

  SKC

  It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  CTG-54 ～ CTG-16	Other	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 14	High-speed steel	Tap for pipes	-	-	-	-	80 ～ 120

  From: ₹ 7,163.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Tap for Gas Pipes

  SKC

  [Applications]
  It can be used to tap thread holes in gas pipes.
  [Features]
  High speed steel with excellent heat resistance and thermal damage resistance is used.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1/4 ～ R3/8	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	19 ～ 28	-	Tap for pipes	-	-	-	-	55 ～ 65

  From: ₹ 1,283.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screw Thread Die For Gas Pipes

  SKC

  [Features]
  Screw thread (die) used for machining male threads for gas pipes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1/4 ～ R1/16	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	19 ～ 28	-	Die	-	-	-	-	-

  From: ₹ 2,126.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Screw Thread Die For Gas Pipes, Taper NPT

  SKC

  [Features]
  Screw thread (die) used for machining male threads for American pipes in gas pipes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  NPT3/8	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	18	-	Die	-	-	-	-	-

  From: ₹ 4,231.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Gas Pipe Solid Die Parallel NSP

  SKC

  [Features]
  Screw thread (die) used for machining male threads for American pipes in gas pipes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  NPS1 ～ NPS7/8	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 1/2 ～ 28	-	Die	-	-	-	-	-

  From: ₹ 2,061.29
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  SU Spiral Flute Tap for Stainless Steel

  SKC

  [Specifications]
  · Shape: Spiral tap
  · Screw type: metric
  · Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]
  · Material Details: SKH

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1.5 ～ 2	-	Spiral Tap	-	-	-	-	-

  From: ₹ 2,334.53
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Point Tap Oversize

  SKC

  [Features]
  ·Steam oxide treatment for excellent rust prevention, corrosion resistance, and durability
  [Applications]
  ·Plating processing, heat treatment processing

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1	-	Point tap	-	-	-	-	62

  From: ₹ 1,785.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Steels, for Dry Tapping and for UltraHigh Speed Tapping, Through Hole Use (with LH Spiral Fluted)_HDISL

  YAMAWA MFG

  [Features]
  · Ultra-high-speed machining and mist or dry machining is possible with a side through-hole shape adopted.
  · Suitable for through-holes in cast aluminum, can be used both horizontally and vertically, and can be used for dry machining and ultra-high speed machining.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M20	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1 ～ 1.75	Cobalt HSS	Spiral Tap	For through hole	5P	TiCN	Available	62 ～ 105

  From: ₹ 2,354.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS

  YAMAWA MFG

  Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for vertical machining of blind holes in materials such as carbon steel and alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M20	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1 ～ 1.75	Cobalt HSS	Spiral Tap	For blind hole	2.5P	TiCN	Available	62 ～ 105

  From: ₹ 2,354.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP

  YAMAWA MFG

  Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M20	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1 ～ 1.75	Cobalt HSS	Spiral Tap	For through hole / For blind hole	2.5P	TiCN	Available	62 ～ 105

  From: ₹ 2,354.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Thread Mills for Metric Internal Threads_MC-HLC

  YAMAWA MFG

  A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1015 ～ 32506N300M	Meter / Taper for Pipe / Parallel for Pipes	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	-	Cobalt HSS	Thread cutter	-	-	TiN	Available	70 ～ 200

  From: ₹ 27,168.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

  YAMAWA MFG

  The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.2 ～ 1	Powder high-speed steel	Roll tap	For blind hole	1P	TiCN	Available	36 ～ 62

  From: ₹ 2,068.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps_SP

  YAMAWA MFG

  The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
  [Features]
  ・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
  ・ Intermittent cutting of female threads with keyway is also possible.
  ・ Capable of machining both synchronously and asynchronously.
  ・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
  ・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
  ・ The tap can easily cut.
  ・ Intermittent cutting of pilot holes with keyway is also possible.
  ・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
  [Applications]
  ・ Ideal for machining blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 1/4	Whitworth	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	7	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	145

  From: ₹ 18,522.93
  Days to Ship: 5 Day(s)

  5 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL

  YAMAWA MFG

  A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 1.75	High-speed steel	Spiral Tap	For through hole	5P	TiN	Available	46 ～ 82

  From: ₹ 1,607.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Nickel Base Alloys_ZEN-P

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 2.5	Powder high-speed steel	Point tap	For through hole	4.5P	-	NA	46 ～ 105

  From: ₹ 1,453.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Nickel Base Alloys_ZEN-B

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 2.5	Powder high-speed steel	Spiral Tap	For blind hole	3P	-	NA	46 ～ 105

  From: ₹ 1,453.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Plus Series Spiral Fluted Taps_+SP

  YAMAWA MFG

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
  [Features]
  · Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
  [Applications]
  · Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 62

  From: ₹ 769.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP

  YAMAWA MFG

  Coated spiral tap that can machine at medium to high speed for a wide range of work materials.
  [Features]
  · A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.
  · Completely threaded to prevent the blade from chipping.
  · Reduction of friction resistance and tapping torque.
  · Maintains screw guidance (stable machining).
  · Maintains excellent chip discharge performance (smooth discharge).
  [Applications]
  · Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.
  · Ideal for water soluble cutting fluids.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1.75	High-speed steel	Spiral Tap	For blind hole	2.5P	TiN	Available	42 ～ 82

  From: ₹ 1,606.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Pointed Taps, Coated_LS-PO-V

  YAMAWA MFG

  * LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 1.75	High-speed steel	Point tap	For through hole	5P	TiN	Available	100 ～ 150

  From: ₹ 2,412.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT

  YAMAWA MFG

  A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1'-11 ～ 3/8-19	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	-	High-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	-	NA	55 ～ 155

  From: ₹ 1,946.20
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL

  YAMAWA MFG

  Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 1.75	High-speed steel	Spiral Tap	For through hole	5P	TiN	Available	46 ～ 82

  From: ₹ 1,934.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for High Carbon Steels_HC+SP

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/2W12 ～ M30	Meter / Whitworth	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 3	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	46 ～ 135

  From: ₹ 735.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 2	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	46 ～ 95

  From: ₹ 754.44
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Spiral Fluted Taps, Deep Hole Use_S-SP

  YAMAWA MFG

  Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M45	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 4.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 180

  From: ₹ 881.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Spiral Pointed Taps for Deep Hole Use_S-PO

  YAMAWA MFG

  A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Short thread length gives low frictional resistance.
  · Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M33 ～ M42	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	3.5 ～ 4.5	High-speed steel	Point tap	For through hole	5P	-	NA	145 ～ 175

  From: ₹ 26,545.58
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Soft Structural Steels_E-SP

  YAMAWA MFG

  A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 3	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	46 ～ 120

  From: ₹ 814.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interrupted Taps for Taper Pipe Threads, Long (ℓg) Type_INT-PT

  YAMAWA MFG

  [Features]
  · Tap that reduces cutting torque by removing 1 thread per land with loose leftward twist.
  · It is a tap particularly suitable for thread processing of viscous materials such as stainless steel and chrome molybdenum steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/2-14	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	-	High-speed steel	Tap for pipes	For through hole	3P	-	NA	80

  From: ₹ 10,752.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  General Application(with OX)_EX-LT-H-POT

  OSG

  [Specifications]
  · Shape: Point tap
  · Screw type: metric
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / High Carbon Steel (over 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Cast Steel (SC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, etc.) [○]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 2.5	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	100 ～ 150

  From: ₹ 1,496.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes Interlap Type (PT) EX-IRT-PT

  OSG

  [Specifications]
  · Shape: Pipe tap
  · Screw type: pipe taper
  · Coating: Non-Coated
  · Work Material: Low-Carbon Steel (less than 0.25% carbon alloy) [○] / Stainless Steel (SUS) [◎] / Cast Steel (SC) [○]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R7/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	55 ～ 95

  From: ₹ 2,683.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated with Interrupted Threads and Long Shank (Short Thread)_TIN-LT-S-IRT

  OSG

  [Specifications]
  · Shape: Pipe tap
  · Screw type: pipe taper
  · Coating: TiN
  · Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / High Carbon Steel (over 0.45% carbon alloy) [○] / Cast Steel (SC) [○] / Cast Iron (FC) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  Rc1/2 ～ Rc3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	14 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	120 ～ 150

  From: ₹ 6,914.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated with Long Shank (Short_TIN-LT-S-TPT

  OSG

  [Specifications]
  · Shape: Pipe tap
  · Screw type: pipe taper
  · Coating: TiN
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [○] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Tempered Steel (25 to 35HRC) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  Rc1/2 ～ Rc3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	14 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	100 ～ 150

  From: ₹ 5,686.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roll Taps for Medium Hardness Carbon Steels_MHRZ-J

  YAMAWA MFG

  [Features]
  · Reduction of torque is now achieved.
  · Durability is dramatically improved through active use of materials and coatings with excellent wear resistance.
  · Stable threading of tempered material (up to 35HRC) is realized.
  · It can be used with water-soluble cutting fluids.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1 ～ 1.5	-	Roll tap	For through hole	2P ～ 4P	-	Available	62 ～ 88

  From: ₹ 2,603.55
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SU Roll Taps_SURZ

  YAMAWA MFG

  [Features]
  · A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
  · The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
  · Demonstrates effectiveness for roll tap machining of stainless steel.
  · Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.2 ～ M3	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.2 ～ 56	Powder high-speed steel	Roll tap	For blind hole	2P	Other	Available	36 ～ 52

  From: ₹ 2,192.71
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Carbon Steels of Medium Hardness,Through Hole Use (with LH Spiral Flutes)_MHSL-J

  YAMAWA MFG

  [Features]
  · Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
  · Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
  · Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
  · Improves the surface roughness of female threads.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1 ～ 1.75	Cobalt HSS	Spiral Tap	For through hole	5P ～ 7P	Other	Available	62 ～ 95

  From: ₹ 1,560.03
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Short Spiral Pointed Taps for Stainless Steels_LS-SU-S-PO

  YAMAWA MFG

  [Features]
  · A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
  · Can also be used for deep tapping operations.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 3	High-speed steel	Point tap	For through hole	4.5P ～ 5P	Other	Available	100 ～ 200

  From: ₹ 2,056.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	OSG	OSG	TRUSCO NAKAYAMA	TANOI MFG	TANOI MFG	SKC	SKC	SKC	SKC	SKC	SKC	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT	UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT	Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT	Grooveless Tap for Steel HRT	MACHINING CENTER Tap with Long Shank_EX-MCT	Hexagonal Re-threading Die For Gas Pipe (PS Screw)	IT-Toughlet C Coated	Long seamless TAFLET	C.T.G Thick Steel Cable Conduits Screw Tap	Tap for Gas Pipes	Screw Thread Die For Gas Pipes	Screw Thread Die For Gas Pipes, Taper NPT	Gas Pipe Solid Die Parallel NSP	SU Spiral Flute Tap for Stainless Steel	Spiral Point Tap Oversize	Spiral Fluted Taps for Steels, for Dry Tapping and for UltraHigh Speed Tapping, Through Hole Use (with LH Spiral Fluted)_HDISL	For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS	For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP	Thread Mills for Metric Internal Threads_MC-HLC	Torqueless Roll Taps with Short Chamfer_SC-TL-RZ	Spiral Fluted Taps_SP	Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL	Spiral Pointed Taps for Nickel Base Alloys_ZEN-P	Spiral Fluted Taps for Nickel Base Alloys_ZEN-B	Plus Series Spiral Fluted Taps_+SP	Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP	Long Shank Spiral Pointed Taps, Coated_LS-PO-V	Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT	Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL	Spiral Fluted Taps for High Carbon Steels_HC+SP	Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX	Short Spiral Fluted Taps, Deep Hole Use_S-SP	Short Spiral Pointed Taps for Deep Hole Use_S-PO	Spiral Fluted Taps for Soft Structural Steels_E-SP	Interrupted Taps for Taper Pipe Threads, Long (ℓg) Type_INT-PT	General Application(with OX)_EX-LT-H-POT	Taper Tap for Pipes Interlap Type (PT) EX-IRT-PT	Taper Pipe Thread Tap TiN coated with Interrupted Threads and Long Shank (Short Thread)_TIN-LT-S-IRT	Taper Pipe Thread Tap TiN coated with Long Shank (Short_TIN-LT-S-TPT	Roll Taps for Medium Hardness Carbon Steels_MHRZ-J	SU Roll Taps_SURZ	Spiral Fluted Taps for Carbon Steels of Medium Hardness,Through Hole Use (with LH Spiral Flutes)_MHSL-J	Long Shank Short Spiral Pointed Taps for Stainless Steels_LS-SU-S-PO
From	₹ 2,592.07	₹ 3,356.87	₹ 2,372.42	₹ 1,002.22	₹ 3,581.89	₹ 4,320.55	₹ 2,076.04	₹ 4,306.13	₹ 7,163.05	₹ 1,283.11	₹ 2,126.93	₹ 4,231.11	₹ 2,061.29	₹ 2,334.53	₹ 1,785.38	₹ 2,354.73	₹ 2,354.73	₹ 2,354.73	₹ 27,168.24	₹ 2,068.00	₹ 18,522.93	₹ 1,607.02	₹ 1,453.22	₹ 1,453.22	₹ 769.36	₹ 1,606.31	₹ 2,412.22	₹ 1,946.20	₹ 1,934.05	₹ 735.73	₹ 754.44	₹ 881.29	₹ 26,545.58	₹ 814.33	₹ 10,752.80	₹ 1,496.45	₹ 2,683.16	₹ 6,914.31	₹ 5,686.07	₹ 2,603.55	₹ 2,192.71	₹ 1,560.03	₹ 2,056.36
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s)	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more
Screw size (Nominal)	M3 ～ M12	S0.5 ～ S0.9	M6	M1.4 ～ M3.5	M10 ～ M12	R1/2	M1 ～ M10	M4 ～ M6	CTG-54 ～ CTG-16	R1/4 ～ R3/8	R1/4 ～ R1/16	NPT3/8	NPS1 ～ NPS7/8	M10 ～ M14	M6	M6 ～ M20	M6 ～ M20	M6 ～ M20	1015 ～ 32506N300M	M1 ～ M6	1 1/4	M3 ～ M12	M3 ～ M20	M3 ～ M20	M2 ～ M6	M2 ～ M12	M3 ～ M12	1'-11 ～ 3/8-19	M3 ～ M12	1/2W12 ～ M30	M3 ～ M16	M2 ～ M45	M33 ～ M42	M3 ～ M24	1/2-14	M3 ～ M20	R1 ～ R7/8	Rc1/2 ～ Rc3/8	Rc1/2 ～ Rc3/8	M6 ～ M14	No.2 ～ M3	M6 ～ M16	M3 ～ M24
Screw Types	Meter	Miniature	Meter	Meter	Meter	-	Meter	Meter	Other	-	-	-	-	Meter	Meter	Meter	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter	Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Meter	Meter / Whitworth	Meter	Meter	Meter	Meter	Taper for Pipe	Meter	Taper for Pipe	Taper for Pipe	Taper for Pipe	Meter	Meter / unified	Meter	Meter
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]
Pitch (P), Number of Threading(mm)	0.5 ～ 1.75	.02 ～ 0.225	1	0.3 ～ 0.6	1.5	14	0.2 ～ 1.5	0.7 ～ 1	11 ～ 14	19 ～ 28	19 ～ 28	18	11 1/2 ～ 28	1.5 ～ 2	1	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	-	0.2 ～ 1	7	0.5 ～ 1.75	0.5 ～ 2.5	0.5 ～ 2.5	0.4 ～ 1	0.4 ～ 1.75	0.5 ～ 1.75	-	0.5 ～ 1.75	0.5 ～ 3	0.5 ～ 2	0.4 ～ 4.5	3.5 ～ 4.5	0.5 ～ 3	-	0.5 ～ 2.5	11 ～ 28	14 ～ 28	14 ～ 28	1 ～ 1.5	0.2 ～ 56	1 ～ 1.75	0.5 ～ 3
Tool Material Type	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	High-speed steel	Vanadium High-Speed Steel	Alloy HSS	High-speed steel	High-speed steel	High-speed steel	-	-	-	-	-	-	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	High-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-	Powder high-speed steel	Cobalt HSS	High-speed steel
Tap Type	Roll tap	Roll tap	Roll tap	Roll tap	Thread-cutting-related tool	Die	Roll tap	Roll tap	Tap for pipes	Tap for pipes	Die	Die	Die	Spiral Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Thread cutter	Roll tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Tap for pipes	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Tap for pipes	Point tap	Tap for pipes	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Spiral Tap	Point tap
Hole type	For through hole / For blind hole	For blind hole	For through hole	For blind hole	For through hole / For blind hole	-	-	-	-	-	-	-	-	-	-	For through hole	For blind hole	For through hole / For blind hole	-	For blind hole	For blind hole	For through hole	For through hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For through hole	For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For blind hole	For through hole	For through hole
Chamfer threads (Lcf)	2P ～ 4P	2P	8P	2.5P	3P	-	1P ～ 4P	1P ～ 2P	-	-	-	-	-	-	-	5P	2.5P	2.5P	-	1P	2.5P	5P	4.5P	3P	2.5P	2.5P	5P	2.5P	5P	2.5P	2.5P	2.5P	5P	2.5P	3P	5P	2.5P	2.5P	2.5P	2P ～ 4P	2P	5P ～ 7P	4.5P ～ 5P
Coating Type	TiN	CrN	TiCN	Non-Coated	Non-Coated	-	Other	TiCN	-	-	-	-	-	-	-	TiCN	TiCN	TiCN	TiN	TiCN	-	TiN	-	-	-	TiN	TiN	-	TiN	-	-	-	-	-	-	Non-Coated	Non-Coated	TiN	TiN	-	Other	Other	Other
Coating Y/N	Available	Available	Available	NA	NA	-	Available	Available	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	NA	Available	NA	NA	NA	Available	Available	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	Available	Available	Available	Available
Overall Length (L)(mm)	80 ～ 150	30	62	34 ～ 48	150	-	30 ～ 75	70 ～ 120	80 ～ 120	55 ～ 65	-	-	-	-	62	62 ～ 105	62 ～ 105	62 ～ 105	70 ～ 200	36 ～ 62	145	46 ～ 82	46 ～ 105	46 ～ 105	42 ～ 62	42 ～ 82	100 ～ 150	55 ～ 155	46 ～ 82	46 ～ 135	46 ～ 95	42 ～ 180	145 ～ 175	46 ～ 120	80	100 ～ 150	55 ～ 95	120 ～ 150	100 ～ 150	62 ～ 88	36 ～ 52	62 ～ 95	100 ～ 200

Loading...