• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT

  OSG

  Suitable for tapping hardening steel up to 55 HRC.
  Work material: High hardness steel to 55 HRC
  For coating / surface treatment / steel
  Accuracy (class) OH3

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Quenched and tempered steel (45 to 55 HRC)[◎]	1.25	Carbide	Hand Tap	For through hole / For blind hole	2.5P ～ 5P	TiCN	Available	70

  From: ₹ 17,928.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HR Coated Pointed Tap for Nickel Alloy_WHR-NI-POT

  OSG

  The application of an HR coating with a high melt sticking resistance to nickel-base alloys achieves a long life even on age hardened nickel-base alloys (40 to 45 HRC)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Nickel-based alloy (Inconel, etc.)[◎]	1.25	Powder high-speed steel	Point tap	For blind hole	5P	Other	Available	70

  From: ₹ 2,886.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT

  OSG

  Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.25	High-speed steel	Roll tap	For through hole / For blind hole	2P	Non-Coated	Available	150

  From: ₹ 4,498.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Spiral Tap V Coated_VP-SFT

  OSG

  Optimal for processing steel alloy pre-hardened steel of 35 to 42 HRC.
  Tool Material: Powder metal high-speed steel
  Thread type: Metric
  Hole type: For blind holes
  Work material: General steel / heat-treated steel
  Coating: Surface treatment for steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	1.25	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	TiCN	Available	70

  From: ₹ 2,380.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Aluminum_EX-AL-SFT

  OSG

  Ideal for tapping blind holes in non-ferrous metals such as aluminum and its alloys and die-casting, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○]	1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	70

  From: ₹ 1,708.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT

  OSG

  Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	1.25	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	150

  From: ₹ 3,138.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for General Application_EX-SFT

  OSG

  Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.25	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	70

  From: ₹ 1,400.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.25	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	TiN	Available	100

  From: ₹ 3,516.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Spiral Tap_OT-SFT

  OSG

  Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.25	Carbide	Spiral Tap	For blind hole	1.5P ～ 2.5P	Non-Coated	NA	70

  From: ₹ 11,733.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT

  OSG

  Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.25	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	70

  From: ₹ 1,197.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Non-Ferrous Metals and Deep Holes_EX-B-DH-SFT

  OSG

  Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.25	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	70

  From: ₹ 1,247.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Super Planet DR-PNAC

  OSG

  A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1 ～ 1.25	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	75

  From: ₹ 62,272.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

  OSG

  A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.25	Carbide	Thread cutter	For blind hole	-	TiAlN	Available	75

  From: ₹ 67,791.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap TiN coated with Long Shank_TIN-LT-POT

  OSG

  Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.25	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	100 ～ 150

  From: ₹ 2,948.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.25	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	70

  From: ₹ 3,397.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Pointed Tap with Long Shank_CPM-LT-POT

  OSG

  The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	1.25	Powder high-speed steel	Point tap	For through hole	5P	Non-Coated	NA	150

  From: ₹ 4,310.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1 ～ 1.25	Powder high-speed steel	Roll tap	For blind hole	2P ～ 4P	TiCN	Available	100 ～ 150

  From: ₹ 3,541.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT

  OSG

  Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.25	Carbide	Roll tap	For through hole / For blind hole	2P	Non-Coated	NA	150

  From: ₹ 20,811.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT

  OSG

  Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.25	High-speed steel	Roll tap	For blind hole	4P	TiN	Available	70

  From: ₹ 1,740.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACHINING CENTER Tap (Normal Length)_EX-S-MCT

  OSG

  Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	Vanadium High-Speed Steel	Thread-cutting-related tool	For through hole / For blind hole	3P	Non-Coated	NA	70

  From: ₹ 1,374.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Flute Tap (SKH)

  SKC

  [Applications]
  Can be used for tapping screw holes in stainless steel.
  [Features]
  This spiral flute tap can discharge chips with a coiled groove.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 1.25	-	Spiral Tap	-	-	-	-	-

  From: ₹ 1,699.65
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Tap for Through Holes 1015

  GUHRING

  [Features]
  · JIS standard compliant tap for through holes.
  · Supports a wide range of work materials from general steel to stainless steel.

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	-	1.25	High-speed steel	Point tap	For through hole	-	TiN	Available	70

  From: ₹ 2,210.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP

  YAMAWA MFG

  Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	1.25	Cobalt HSS	Spiral Tap	For through hole / For blind hole	2.5P	TiCN	Available	70

  From: ₹ 3,426.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP

  YAMAWA MFG

  Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Suitable for blind holes in aluminum castings, for both longitudinal and transverse machining.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	Cobalt HSS	Spiral Tap	For through hole / For blind hole	2.5P	TiCN	Available	70

  From: ₹ 3,426.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP

  YAMAWA MFG

  [Features]
  · For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	1.25	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	70

  From: ₹ 1,709.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps for Left Hand Threads_PO-V

  YAMAWA MFG

  Coated point tap suitable for low carbon steel to high carbon steel machining.
  [Features]
  · Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
  [Applications]
  · Can process both synchronously and asynchronously.
  · Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	High-speed steel	Point tap	For through hole	5P	TiN	Available	70

  From: ₹ 2,200.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL

  YAMAWA MFG

  A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 1.25	High-speed steel	Spiral Tap	For through hole	5P	TiN	Available	70

  From: ₹ 2,128.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Nut Taps_NT

  YAMAWA MFG

  Straight nut tap mainly used for machining nuts using a tapping machine.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	-	1.25	High-speed steel	Point tap	For through hole	24P	-	NA	140

  From: ₹ 2,701.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Nickel Base Alloys_ZEN-P

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	1.25	Powder high-speed steel	Point tap	For through hole	4.5P	-	NA	70

  From: ₹ 2,128.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP

  YAMAWA MFG

  Coated spiral tap that can machine at medium to high speed for a wide range of work materials.
  [Features]
  · A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.
  · Completely threaded to prevent the blade from chipping.
  · Reduction of friction resistance and tapping torque.
  · Maintains screw guidance (stable machining).
  · Maintains excellent chip discharge performance (smooth discharge).
  [Applications]
  · Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.
  · Ideal for water soluble cutting fluids.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1 ～ 1.25	High-speed steel	Spiral Tap	For blind hole	2.5P	TiN	Available	70

  From: ₹ 2,161.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Fluted Taps, Coated_LS-SP-V

  YAMAWA MFG

  * LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	100 ～ 150

  From: ₹ 2,977.44
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Pointed Taps, Coated_LS-PO-V

  YAMAWA MFG

  * LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	High-speed steel	Point tap	For through hole	5P	TiN	Available	100 ～ 150

  From: ₹ 2,977.44
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL

  YAMAWA MFG

  Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	High-speed steel	Spiral Tap	For through hole	5P	TiN	Available	70

  From: ₹ 2,933.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	70

  From: ₹ 1,144.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D

  YAMAWA MFG

  Solid die for difficult-to-cut materials, such as stainless steel, etc.
  [Features]
  · Adopts high-speed tool steel (HSS).
  · Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.
  · The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.
  · Stable male threading can be performed.
  · Solid type with minimal variation even under harsh cutting condition specifications.
  [Applications]
  · Optimal for machining stainless steel and other difficult-to-cut materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	-	0.5 ～ 1.25	High-speed steel	Die	-	-	-	NA	-

  From: ₹ 4,879.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T

  YAMAWA MFG

  Provides simple check of pilot hole diameter. Uses high speed tool steel out of consideration for wear resistance. Can be used for either through holes or blind holes with margin.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	-	1.25	High-speed steel	Thread-cutting-related tool	-	-	-	NA	90

  From: ₹ 1,924.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Taps for Light Alloys_N-CT-LA

  YAMAWA MFG

  A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.75 ～ 1.25	Carbide	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	62 ～ 75

  From: ₹ 9,993.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Carbide Taps_N-CT-PO

  YAMAWA MFG

  Carbide point tap ideal for mass-production screw machining of aluminum casting (AC), aluminum die-casting (ADC), zinc die-casting (ZDC), etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	Carbide	Point tap	For through hole	5P	-	NA	70

  From: ₹ 15,002.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Aluminum_HFACT-P

  YAMAWA MFG

  Carbide tap that makes ultra-high speed machining possible and a side-through hole shape adopted to support internal lubrication, mist type lubrication and low temperature cold/dry machining. Suitable for machining through holes in aluminum cast iron and aluminum die castings, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	Carbide	Point tap	For through hole	4P	TiAlN	Available	70

  From: ₹ 16,813.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-B

  YAMAWA MFG

  Carbide tap that makes ultra-high speed machining possible and a center-through hole shape adopted to support internal lubrication, mist type lubrication and low temperature cold/dry machining. Suitable for blind holes in cast iron.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○]	1.25	Carbide	Point tap	For blind hole	2.5P	TiAlN	Available	70

  From: ₹ 16,813.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-P

  YAMAWA MFG

  Carbide tap that makes ultra-high speed machining possible and a side-through hole shape adopted to support internal lubrication, mist type lubrication and low temperature cold/dry machining. Suitable for through holes in cast iron.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○]	1.25	Carbide	Point tap	For through hole	4P	TiAlN	Available	70

  From: ₹ 16,813.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  General Application(with OX)_EX-LT-H-POT

  OSG

  [Specifications]
  · Shape: Point tap
  · Screw type: metric
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / High Carbon Steel (over 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Cast Steel (SC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, etc.) [○]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.25	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	100 ～ 150

  From: ₹ 1,815.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series, X Performer Long Shank LT-S-XPF

  OSG

  [Specifications]
  · Shape: Roll tap
  · Screw type: metric
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.25	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	-	Other	Available	100 ～ 150

  From: ₹ 3,721.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roll Taps for Medium Hardness Carbon Steels_MHRZ-J

  YAMAWA MFG

  [Features]
  · Reduction of torque is now achieved.
  · Durability is dramatically improved through active use of materials and coatings with excellent wear resistance.
  · Stable threading of tempered material (up to 35HRC) is realized.
  · It can be used with water-soluble cutting fluids.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	1.25	-	Roll tap	For through hole	2P ～ 4P	-	Available	70

  From: ₹ 3,495.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type)

  SANDVIK

  [Features]
  · A high-productivity tap tool.
  · The long tool life and excellent chip discharging capabilities help ensure high levels of stability.
  · The highly heat-resistant TiN coating ensures a long life, even for those work materials which are prone to building up heat.
  · There are different taps for different work materials, making selecting a tap simple
  [Applications]
  · For machining through holes.
  · Work material: steel, cast iron, aluminum alloy.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	-	1	-	Point tap	-	-	TiN	Available	70

  From: ₹ 4,476.60
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SKC	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	YAMAWA MFG	SANDVIK
Product Series	Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT	HR Coated Pointed Tap for Nickel Alloy_WHR-NI-POT	Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT	CPM Spiral Tap V Coated_VP-SFT	Spiral Tap for Aluminum_EX-AL-SFT	Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT	Spiral Tap for General Application_EX-SFT	Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT	Tungsten Carbide Spiral Tap_OT-SFT	Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT	Spiral Tap for Non-Ferrous Metals and Deep Holes_EX-B-DH-SFT	Planet Cutter Series Super Planet DR-PNAC	Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC	Pointed Tap TiN coated with Long Shank_TIN-LT-POT	LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT	CPM Pointed Tap with Long Shank_CPM-LT-POT	CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT	Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT	Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT	MACHINING CENTER Tap (Normal Length)_EX-S-MCT	Spiral Flute Tap (SKH)	Point Tap for Through Holes 1015	For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP	For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP	Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP	Spiral Pointed Taps for Left Hand Threads_PO-V	Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL	Nut Taps_NT	Spiral Pointed Taps for Nickel Base Alloys_ZEN-P	Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP	Long Shank Spiral Fluted Taps, Coated_LS-SP-V	Long Shank Spiral Pointed Taps, Coated_LS-PO-V	Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL	Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX	HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D	Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T	Carbide Taps for Light Alloys_N-CT-LA	Spiral Pointed Carbide Taps_N-CT-PO	Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Aluminum_HFACT-P	Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-B	Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-P	General Application(with OX)_EX-LT-H-POT	Grooveless Tap Series, X Performer Long Shank LT-S-XPF	Roll Taps for Medium Hardness Carbon Steels_MHRZ-J	Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type)
From	₹ 17,928.00	₹ 2,886.75	₹ 4,498.04	₹ 2,380.45	₹ 1,708.07	₹ 3,138.55	₹ 1,400.02	₹ 3,516.25	₹ 11,733.44	₹ 1,197.76	₹ 1,247.33	₹ 62,272.80	₹ 67,791.09	₹ 2,948.36	₹ 3,397.05	₹ 4,310.53	₹ 3,541.71	₹ 20,811.85	₹ 1,740.22	₹ 1,374.56	₹ 1,699.65	₹ 2,210.00	₹ 3,426.73	₹ 3,426.73	₹ 1,709.04	₹ 2,200.60	₹ 2,128.27	₹ 2,701.33	₹ 2,128.27	₹ 2,161.75	₹ 2,977.44	₹ 2,977.44	₹ 2,933.24	₹ 1,144.20	₹ 4,879.38	₹ 1,924.67	₹ 9,993.78	₹ 15,002.53	₹ 16,813.96	₹ 16,813.96	₹ 16,813.96	₹ 1,815.24	₹ 3,721.18	₹ 3,495.58	₹ 4,476.60
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	11 Day(s) or more
Screw size (Nominal)	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Quenched and tempered steel (45 to 55 HRC)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	-
Pitch (P), Number of Threading(mm)	1.25	1.25	1.25	1.25	1	1.25	1.25	1.25	1.25	1.25	1.25	1 ～ 1.25	1.25	1.25	1.25	1.25	1 ～ 1.25	1.25	1.25	1.25	1 ～ 1.25	1.25	1.25	1.25	1.25	1.25	1 ～ 1.25	1.25	1.25	1 ～ 1.25	1.25	1.25	1.25	1.25	0.5 ～ 1.25	1.25	0.75 ～ 1.25	1.25	1.25	1.25	1.25	1.25	1.25	1.25	1
Tool Material Type	Carbide	Powder high-speed steel	High-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Carbide	High-speed steel	Vanadium High-Speed Steel	-	High-speed steel	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-	-
Tap Type	Hand Tap	Point tap	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Thread cutter	Thread cutter	Point tap	Point tap	Point tap	Roll tap	Roll tap	Roll tap	Thread-cutting-related tool	Spiral Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Point tap	Point tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Spiral Tap	Die	Thread-cutting-related tool	Hand Tap	Point tap	Point tap	Point tap	Point tap	Point tap	Roll tap	Roll tap	Point tap
Hole type	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole	For through hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	-	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole	For through hole	For through hole	For blind hole	For blind hole	For through hole	For through hole	For blind hole	-	-	For through hole / For blind hole	For through hole	For through hole	For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole	-
Chamfer threads (Lcf)	2.5P ～ 5P	5P	2P	2.5P	2.5P	2.5P	2.5P	3P	1.5P ～ 2.5P	2.5P	2.5P	-	-	5P	5P	5P	2P ～ 4P	2P	4P	3P	-	-	2.5P	2.5P	2.5P	5P	5P	24P	4.5P	2.5P	2.5P	5P	5P	2.5P	-	-	1.5P ～ 5P	5P	4P	2.5P	4P	5P	-	2P ～ 4P	-
Coating Type	TiCN	Other	Non-Coated	TiCN	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	TiN	TiN	Non-Coated	TiCN	Non-Coated	TiN	Non-Coated	-	TiN	TiCN	TiCN	-	TiN	TiN	-	-	TiN	-	TiN	TiN	-	-	-	-	-	TiAlN	TiAlN	TiAlN	Non-Coated	Other	-	TiN
Coating Y/N	Available	Available	Available	Available	NA	NA	NA	Available	NA	NA	NA	Available	Available	Available	Available	NA	Available	NA	Available	NA	-	Available	Available	Available	NA	Available	Available	NA	NA	Available	NA	Available	Available	NA	NA	NA	NA	NA	Available	Available	Available	NA	Available	Available	Available
Overall Length (L)(mm)	70	70	150	70	70	150	70	100	70	70	70	75	75	100 ～ 150	70	150	100 ～ 150	150	70	70	-	70	70	70	70	70	70	140	70	70	100 ～ 150	100 ～ 150	70	70	-	90	62 ～ 75	70	70	70	70	100 ～ 150	100 ～ 150	70	70

Loading...