Screw-Hole-Related Tools（Screw Types：Meter Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for Thin Plate EX-SS-POT

  OSG

  Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○]	0.4 ～ 1.75	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	40 ～ 82

  From: ₹ 813.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Tap for Steels_NRT

  OSG

  Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.6 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○]	0.35 ～ 1.25	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	Non-Coated	NA	36 ～ 75

  From: ₹ 1,047.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACHINING CENTER Tap (Normal Length)_EX-S-MCT

  OSG

  Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25	Vanadium High-Speed Steel	Thread-cutting-related tool	For through hole / For blind hole	3P	Non-Coated	NA	70

  From: ₹ 1,374.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

  GUHRING

  [Features]
  · Threading is performed with helical cutting.
  · If the pitch is the same, one unit can process threads with different diameters.
  · Both right-handed and left-handed female threads can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M20	Meter	-	1 ～ 2.5	Carbide	Thread cutter	For through hole / For blind hole	-	TiCN	Available	54 ～ 102

  From: ₹ 29,284.47
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

  GUHRING

  [Features]
  · Threading is performed with helical cutting.
  · If the pitch is the same, one unit can process threads with different diameters.
  · Both right-handed and left-handed female threads can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M20	Meter	-	1 ～ 2.5	Carbide	Thread cutter	For through hole / For blind hole	-	TiCN	Available	54 ～ 102

  From: ₹ 70,587.53
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP

  YAMAWA MFG

  [Features]
  · For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	0.5 ～ 2	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	46 ～ 88

  From: ₹ 1,149.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Roll Taps, Coated_R+V

  YAMAWA MFG

  A coating roll tap suitable for threading steel and nonferrous materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.2 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.25 ～ 1	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiN	Available	36 ～ 62

  From: ₹ 1,701.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Nickel Base Alloys_ZEN-B

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	0.5 ～ 1.75	Powder high-speed steel	Spiral Tap	For blind hole	3P	-	NA	46 ～ 82

  From: ₹ 1,326.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D

  YAMAWA MFG

  Solid die for difficult-to-cut materials, such as stainless steel, etc.
  [Features]
  · Adopts high-speed tool steel (HSS).
  · Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.
  · The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.
  · Stable male threading can be performed.
  · Solid type with minimal variation even under harsh cutting condition specifications.
  [Applications]
  · Optimal for machining stainless steel and other difficult-to-cut materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	-	0.5	High-speed steel	Die	-	-	-	NA	-

  From: ₹ 8,884.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Soft Structural Steels_E-SP

  YAMAWA MFG

  A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○]	0.7 ～ 1.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	52 ～ 75

  From: ₹ 814.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Spiral Tap SGSP

  NACHI(FUJIKOSHI)

  [Features]
  ·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditions

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.75 ～ 1.5	Alloy HSS	Spiral Tap	For through hole / For blind hole	2.5	TiCN	Available	82

  From: ₹ 3,064.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Point Tap SGPO

  NACHI(FUJIKOSHI)

  [Features]
  ・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.
  

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.45	High-speed steel	Point tap	For through hole	5	TiCN	Available	-

  From: ₹ 2,145.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Spiral Flute Tap, Stainless Steel, GSPS8M/-12M/-16M

  NACHI(FUJIKOSHI)

  Coating tap suitable for stainless steel and places prone to chip clogging.
  [Features]
  · Adopts powdered high-speed steel with excellent wear resistance.
  · Tap with TiN coating on the surface and stable service life due to high-speed and high-efficiency threading.
  · A thick neck, which eliminates chipping and wrapping of chips, has been adopted.
  [Applications]
  · Coating tap suitable for stainless steel and places prone to chip clogging.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	1.25 ～ 2	Alloy HSS	Spiral Tap	For blind hole	2.5P	TiN	Available	70 ～ 95

  From: ₹ 2,508.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT

  OSG

  Achieves female threading of stainless steel with a water-soluble cutting fluid.
  Tool Material: Vanadium high-speed steel
  Hole type: For blind holes
  Work material: General steel / stainless steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎]	0.4 ～ 3	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN / CrN	Available	40 ～ 120

  From: ₹ 1,819.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

  OSG

  Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.25 ～ 0.8	Carbide	Thread cutter	For through hole / For blind hole	-	For High Hardness (Silicon Group) / Other	Available	40

  From: ₹ 7,271.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HR Coated Pointed Tap for Nickel Alloy_WHR-NI-POT

  OSG

  The application of an HR coating with a high melt sticking resistance to nickel-base alloys achieves a long life even on age hardened nickel-base alloys (40 to 45 HRC)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Nickel-based alloy (Inconel, etc.)[◎]	1.25	Powder high-speed steel	Point tap	For blind hole	5P	Other	Available	70

  From: ₹ 2,886.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT

  OSG

  Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.25	High-speed steel	Roll tap	For through hole / For blind hole	2P	Non-Coated	Available	150

  From: ₹ 4,498.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Aluminum_EX-AL-SFT

  OSG

  Ideal for tapping blind holes in non-ferrous metals such as aluminum and its alloys and die-casting, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8	Meter	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○]	1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	70

  From: ₹ 1,708.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral SYNCHRO Tap for Aluminum_HS-AL-SFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	0.4 ～ 1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	40 ～ 62

  From: ₹ 1,418.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Stainless Steel, Deep Holes SUS-DH-SFT

  OSG

  Ideal for deep hole drilling of stainless steel exceeding 2D.
  Work material: Stainless steel / copper / resin
  Coating: Surface treatment, steam oxide treatment

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.6 ～ M10	Meter	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	0.45 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	44 ～ 75

  From: ₹ 1,160.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Stainless Steels_EX-SUS-SFT

  OSG

  Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M42	Meter	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	0.4 ～ 4.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P ～ 3P	Non-Coated	NA	40 ～ 175

  From: ₹ 940.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Spiral Tap_LW-SFT

  OSG

  The low helical grooves discharge chips backward while cutting them finely to achieve stable screw tapping. Features excellent anti-chipping as well.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	62

  From: ₹ 1,010.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.5 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	TiN	Available	100 ～ 150

  From: ₹ 3,516.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for High-Carbon Steel EX-HC-SFT

  OSG

  Suitable for blind hole machining in high carbon materials such as medium carbon steel and higher, die steel, alloy steel, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M12	Meter	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○]	1.25 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	75 ～ 82

  From: ₹ 1,737.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT

  OSG

  Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.6 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.45 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	44 ～ 75

  From: ₹ 945.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Spiral Tap_CPM-SFT

  OSG

  The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M48	Meter	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	0.3 ～ 5	Powder high-speed steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	34 ～ 185

  From: ₹ 1,065.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Non-Ferrous Metals and Deep Holes_EX-B-DH-SFT

  OSG

  Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M16	Meter	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	75 ～ 95

  From: ₹ 1,513.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap TiN coated_TIN-HT

  OSG

  Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.4 ～ 3	Vanadium High-Speed Steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	TiN	Available	40 ～ 120

  From: ₹ 1,687.98
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

  OSG

  Enables efficient chip discharge by discharging cutting fluid from the oil holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.5 ～ 3	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	60 ～ 120

  From: ₹ 22,756.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap Series V Coating V-POT

  OSG

  Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1 ～ 1.25	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiCN	Available	70 ～ 75

  From: ₹ 2,762.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap V coated with Long Shank_V-LT-POT

  OSG

  Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.7 ～ 1	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiCN	Available	100

  From: ₹ 2,472.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT

  OSG

  With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M24	Meter	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	0.5 ～ 3	Vanadium High-Speed Steel	Point tap	For through hole	4P	Non-Coated	NA	100 ～ 200

  From: ₹ 1,546.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for Deep Holes EX-DH-POT

  OSG

  Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.4 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	4P	Non-Coated	NA	40 ～ 95

  From: ₹ 916.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M3	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.25 ～ 0.5	Powder high-speed steel	Roll tap	For blind hole	2P	TiCN	Available	30 ～ 46

  From: ₹ 2,104.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT

  OSG

  Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○]	1	Vanadium High-Speed Steel	Roll tap	For through hole	8P	TiCN	Available	62

  From: ₹ 2,372.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT

  OSG

  Highly accurate female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.7	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	2P	Non-Coated	NA	52

  From: ₹ 1,437.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap for Steel HRT

  OSG

  Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M3.5	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○]	0.3 ～ 0.6	High-speed steel	Roll tap	For blind hole	2.5P	Non-Coated	NA	34 ～ 48

  From: ₹ 1,134.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT

  OSG

  Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.5 ～ 1.75	Carbide	Roll tap	For through hole / For blind hole	2P	Non-Coated	NA	100 ～ 150

  From: ₹ 14,457.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT

  OSG

  Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M6	Meter	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.7 ～ 1	High-speed steel	Roll tap	For blind hole	2.5P ～ 4P	Non-Coated	NA	52 ～ 62

  From: ₹ 1,010.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT

  OSG

  Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M20	Meter	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.25 ～ 1.5	High-speed steel	Roll tap	For blind hole	4P	TiN	Available	70 ～ 105

  From: ₹ 1,740.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACHINING CENTER Tap with Long Shank_EX-MCT

  OSG

  Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5	Vanadium High-Speed Steel	Thread-cutting-related tool	For through hole / For blind hole	3P	Non-Coated	NA	150

  From: ₹ 3,581.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Tapping Drill

  ONISHI MANUFACTURING

  [Features]
  · Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.
  [Applications]
  · For formation and modification of through-hole threads.
  · Work materials: Iron, aluminum, brass.
  
  [Features]
  · 1 unit enables pilot hole machining and thread cutting at the same time.
  · 6.35 mm hex shaft finish that supports impact drivers.
  · Drill cutting edge with good bite due to X-type thinning and outstanding sharpness

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M6	Meter	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.5 ～ 1	High-speed steel	Thread-cutting-related tool	For through hole	-	Non-Coated	NA	66 ～ 69

  From: ₹ 2,622.51
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Tap (for Through Hole)【3 Pieces Per Package】

  ONISHI MANUFACTURING

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	High-speed steel	Thread-cutting-related tool	For through hole	-	Non-Coated	NA	70/70/70

  From: ₹ 671.48
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap (for Metal Screws)

  TRUSCO NAKAYAMA

  [Features]
  · A spiral tap for general steel.
  [Applications]
  · For blind hole machining.
  · Work materials: General steel, low/medium carbon steel, alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	-	-	46 ～ 95

  From: ₹ 1,003.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Tap (for Metric Screws)

  TRUSCO NAKAYAMA

  [Features]
  · High-speed tapping is possible.
  · Oxidization treated.
  [Applications]
  · For through hole finish work.
  · Work materials: General steel, low-medium carbon steel, alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	5P	-	-	46 ～ 88

  From: ₹ 872.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	GUHRING	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	ONISHI MANUFACTURING	ONISHI MANUFACTURING	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA
Product Series	Pointed Tap for Thin Plate EX-SS-POT	Fluteless (Nu-Roll) Tap for Steels_NRT	MACHINING CENTER Tap (Normal Length)_EX-S-MCT	Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737	Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133	Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP	Roll Taps, Coated_R+V	Spiral Fluted Taps for Nickel Base Alloys_ZEN-B	HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D	Spiral Fluted Taps for Soft Structural Steels_E-SP	SG Spiral Tap SGSP	SG Point Tap SGPO	G Spiral Flute Tap, Stainless Steel, GSPS8M/-12M/-16M	Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT	Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC	HR Coated Pointed Tap for Nickel Alloy_WHR-NI-POT	Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT	Spiral Tap for Aluminum_EX-AL-SFT	Spiral SYNCHRO Tap for Aluminum_HS-AL-SFT	Spiral Tap for Stainless Steel, Deep Holes SUS-DH-SFT	Spiral Tap for Stainless Steels_EX-SUS-SFT	Low Spiral Tap_LW-SFT	Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT	Spiral Tap for High-Carbon Steel EX-HC-SFT	Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT	CPM Spiral Tap_CPM-SFT	Spiral Tap for Non-Ferrous Metals and Deep Holes_EX-B-DH-SFT	Straight Flutes Tap TiN coated_TIN-HT	Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC	Pointed Tap Series V Coating V-POT	Pointed Tap V coated with Long Shank_V-LT-POT	Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT	Pointed Tap for Deep Holes EX-DH-POT	CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT	Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT	Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT	Grooveless Tap for Steel HRT	Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT	Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT	Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT	MACHINING CENTER Tap with Long Shank_EX-MCT	Hexagonal Shaft Tapping Drill	Hexagonal Shaft Tap (for Through Hole)【3 Pieces Per Package】	Spiral Tap (for Metal Screws)	Point Tap (for Metric Screws)
From	₹ 813.36	₹ 1,047.76	₹ 1,374.56	₹ 29,284.47	₹ 70,587.53	₹ 1,149.16	₹ 1,701.49	₹ 1,326.00	₹ 8,884.16	₹ 814.33	₹ 3,064.29	₹ 2,145.47	₹ 2,508.45	₹ 1,819.25	₹ 7,271.93	₹ 2,886.75	₹ 4,498.04	₹ 1,708.07	₹ 1,418.76	₹ 1,160.27	₹ 940.60	₹ 1,010.25	₹ 3,516.25	₹ 1,737.55	₹ 945.96	₹ 1,065.16	₹ 1,513.87	₹ 1,687.98	₹ 22,756.65	₹ 2,762.18	₹ 2,472.87	₹ 1,546.02	₹ 916.49	₹ 2,104.55	₹ 2,372.42	₹ 1,437.53	₹ 1,134.82	₹ 14,457.76	₹ 1,010.25	₹ 1,740.22	₹ 3,581.89	₹ 2,622.51	₹ 2,014.42	₹ 1,003.25	₹ 872.09
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Screw size (Nominal)	M2 ～ M12	M1.6 ～ M10	M8	M6 ～ M20	M6 ～ M20	M3 ～ M14	M1.2 ～ M6	M3 ～ M12	M8	M4 ～ M10	M8 ～ M12	M2.6	M8 ～ M16	M2 ～ M24	-	M8	M8	M8	M2 ～ M6	M2.6 ～ M10	M2 ～ M42	M6	M3 ～ M10	M10 ～ M12	M2.6 ～ M10	M1.4 ～ M48	M10 ～ M16	M2 ～ M24	-	M8 ～ M10	M4 ～ M6	M3 ～ M24	M2 ～ M16	M1 ～ M3	M6	M4	M1.4 ～ M3.5	M3 ～ M12	M4 ～ M6	M8 ～ M20	M10 ～ M12	M3 ～ M6	-	M3 ～ M16	M3 ～ M14
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Nickel-based alloy (Inconel, etc.)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]
Pitch (P), Number of Threading(mm)	0.4 ～ 1.75	0.35 ～ 1.25	1.25	1 ～ 2.5	1 ～ 2.5	0.5 ～ 2	0.25 ～ 1	0.5 ～ 1.75	0.5	0.7 ～ 1.5	0.75 ～ 1.5	0.45	1.25 ～ 2	0.4 ～ 3	0.25 ～ 0.8	1.25	1.25	1	0.4 ～ 1	0.45 ～ 1.5	0.4 ～ 4.5	1	0.5 ～ 1.5	1.25 ～ 1.5	0.45 ～ 1.5	0.3 ～ 5	1.5	0.4 ～ 3	0.5 ～ 3	1 ～ 1.25	0.7 ～ 1	0.5 ～ 3	0.4 ～ 2	0.25 ～ 0.5	1	0.7	0.3 ～ 0.6	0.5 ～ 1.75	0.7 ～ 1	1.25 ～ 1.5	1.5	0.5 ～ 1	-	0.5 ～ 2	0.5 ～ 2
Tool Material Type	Vanadium High-Speed Steel	High-speed steel	Vanadium High-Speed Steel	Carbide	Carbide	High-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	Alloy HSS	High-speed steel	Alloy HSS	Vanadium High-Speed Steel	Carbide	Powder high-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	Carbide	High-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel
Tap Type	Point tap	Roll tap	Thread-cutting-related tool	Thread cutter	Thread cutter	Spiral Tap	Roll tap	Spiral Tap	Die	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Spiral Tap	Thread cutter	Point tap	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Thread cutter	Point tap	Point tap	Point tap	Point tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Spiral Tap	Point tap
Hole type	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	-	For blind hole	For through hole / For blind hole	For through hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole	For blind hole	For through hole
Chamfer threads (Lcf)	5P	2P ～ 4P	3P	-	-	2.5P	2P ～ 4P	3P	-	2.5P	2.5	5	2.5P	2.5P	-	5P	2P	2.5P	3P	2.5P	2.5P ～ 3P	2.5P	3P	3P	2.5P	3P	2.5P	1.5P ～ 5P	-	5P	5P	4P	4P	2P	8P	2P	2.5P	2P	2.5P ～ 4P	4P	3P	-	-	2.5P	5P
Coating Type	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	-	TiN	-	-	-	TiCN	TiCN	TiN	TiN / CrN	For High Hardness (Silicon Group) / Other	Other	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	TiAlN	TiCN	TiCN	Non-Coated	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	-	-
Coating Y/N	NA	NA	NA	Available	Available	NA	Available	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	Available	Available	Available	Available	NA	NA	Available	Available	NA	NA	NA	NA	Available	NA	NA	NA	-	-
Overall Length (L)(mm)	40 ～ 82	36 ～ 75	70	54 ～ 102	54 ～ 102	46 ～ 88	36 ～ 62	46 ～ 82	-	52 ～ 75	82	-	70 ～ 95	40 ～ 120	40	70	150	70	40 ～ 62	44 ～ 75	40 ～ 175	62	100 ～ 150	75 ～ 82	44 ～ 75	34 ～ 185	75 ～ 95	40 ～ 120	60 ～ 120	70 ～ 75	100	100 ～ 200	40 ～ 95	30 ～ 46	62	52	34 ～ 48	100 ～ 150	52 ～ 62	70 ～ 105	150	66 ～ 69	70/70/70	46 ～ 95	46 ～ 88

Loading...