• You can add up to 6 items per a category to the compare list. Compare

  

  Double-Stepped Tapped Punches -HW Coating-

  MISUMI

  ・As a measure against bolt breakage, we have expanded the specifications for large diameter tap types and added specifications for extra large diameter taps!
  ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches.
  ・A punch with a guide section separate from the cutting edge. Please use this when the required cutting edge length B for the guide cannot be secured with the cutting edge diameter P.
  ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try the large diameter tap type or the extra large diameter tap type.

  CAD ：

  2D / 3D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Stepped Shoulder Punches, TiCN Coating

  MISUMI

  A two-stage shoulder punch with TiCN coating, which is widely used in press dies.

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Stepped Shoulder Punches -NW Coating(DLC Coating+WPC® Foundation Treatment)-

  MISUMI

  A two-stage shoulder punch that improves coating adhesion by using DLC coating and WPCⓇ processing together. Effective for aluminum piercing processing.

  CAD ：

  2D / 3D

  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Jector Punches Normal and Lapping with Large Diameter Pins

  MISUMI

  ・Since the diameter of the waste removal pin is larger than that of a normal jetter punch, a more stable waste removal effect can be expected.
  ・The pin strength and rigidity have also been increased by increasing the diameter of the brushing pin. Please also try this when pin breakage is a problem with regular jet punches.

  CAD ：

  2D / 3D

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Round Punches -HW Coating-

  MISUMI

  This punch is designed to hold the punch with the brim and prevent it from coming off with a key plate, etc. The cutting edge is coated with HW coating, which has improved adhesion than regular TiCN.

  CAD ：

  2D / 3D

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Shank type
Tip shape
Jector
Material
Heavy-load punches
Shank (mounting part) shape
Surface treatment

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Double-Stepped Tapped Punches -HW Coating-	Double Stepped Shoulder Punches, TiCN Coating	Double Stepped Shoulder Punches -NW Coating(DLC Coating+WPC® Foundation Treatment)-	Jector Punches Normal and Lapping with Large Diameter Pins	Round Punches -HW Coating-
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	7 Day(s) or more	6 Day(s) or more	13 Day(s) or more	2 Day(s) or more	8 Day(s) or more
Specifications
Shank type	Double-stepped	Double-stepped	Double-stepped	Single-stepped	Single-stepped
Tip shape	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A
Jector	None	None	None	Large-diameter pin type	None
Material	Powdered high-speed steel	SKH51 Equivalent / Powdered high-speed steel	SKH51 Equivalent / Powdered high-speed steel	SKD11 Equivalent	Powdered high-speed steel
Heavy-load punches	No	No	No	No	No
Shank (mounting part) shape	Tapped	Standard	Standard	Standard	Flange stopper
Surface treatment	HW coating	TiCN	DLC foundation WPC	None / Lapping	HW coating

Loading...