Chamfering / Centering Tools（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V

  THE CUT

  [Features]
  · No need to turn over the work material. (Also removes through-hole burrs)
  · Both sides can be chamfered with the one cutter tool.
  · Ultra-fine particle carbide with TiAlN coating for a longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2.8 ～ 12	90°	Hole Chamfer / Drilling / Other	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 14,520.76
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering. Can also be used as a deburring tool
  ·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
  ·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: ₹ 3,560.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  MISUMI

  Capable of everything from positioning to chamfering in a single shot

  • Non-Coated
  • Aluminum
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 3,909.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide NC Center Drill 1106

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[◎]	-	-	NA	-	-

  From: ₹ 3,746.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carving Cutter for 45°

  Nine9

  An innovative carbide insert type engraving tool. High-quality engraving is possible on most material.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6	45	Other	-	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,730.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spot Drill / Carving Cutter for 90°

  Nine9

  Carbide insert type NC spot drill. High efficiency! Low cost! Ideal for CNC lathes and machining centers. Inserts for engraving cutters can also be used.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	10	90	Centering (Positioning) / Hole Chamfer	-	Single blade	NA	NA	Non-Coated	-

  From: ₹ 11,208.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90°

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 671.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90° TiCN Coating

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: ₹ 1,012.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius Cutter Carbide for Aluminum

  IWATA TOOL

  [Features]
  · The raking blades/flutes ensure a highly precise rounded form.
  · First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracy

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 5	-	Round Chamfer	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	0.5 ～ 3

  From: ₹ 6,434.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating

  IWATA TOOL

  [Features]
  · The raking blades/flutes ensure a highly precise rounded form.
  · First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracy

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 5	-	Round Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Single blade	NA	Available	Other	0.5 ～ 3

  From: ₹ 9,083.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Gentlemen

  FUJIGEN

  [Features]
  · The longest blade length. It is also possible to machine difficult-to-cut materials with a unique breaker with a tip blade length of 30 mm.
  · Available in 13 angles from 15° to 75°.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	50.7 ～ 73.3	15 ～ 75	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 54,347.22
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi Angle Mill

  FUJIGEN

  [Features]
  · Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.
  · 0° to 90° at 5° pitch for easy, reliable angle adjustment

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	0–90	Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 43,800.84
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special

  FUJIGEN

  Replaceable insert for round chamfering of R0.5 to R5.
  Carbide insert that can be used on 4 sides with 1 insert.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	56	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: ₹ 37,654.35
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Extended life with excellent thermal and abrasion resistance thanks to the titanium coating.
  · Finest surface finish without any chatter marks.
  [Applications]
  · Work materials: Aluminum, stainless steel, iron, resin, copper.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiN	-

  From: ₹ 2,525.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, Type 1, Carbide 60°

  OKABE

  Because it uses carbide materials, it has both high hardness and elasticity. It is a center drill manufactured with one of the best heat treatment, and can be used for machining general steel, heat-treated steel, stainless steel, cast iron, etc.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 6	60	Centering (Positioning)	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade / Double-edged	NA	NA	Non-Coated	-

  From: ₹ 9,800.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, JIS Type 1 60°

  OKABE

  Because it is made of high-speed steel, it has high hardness. It is a center drill manufactured with one of the best heat treatment, making it suitable for machining general steel.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.7 ～ 5	60	Centering (Positioning)	general steel[○]	Double-edged	NA	NA	Non-Coated	-

  From: ₹ 882.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Mentatsu aluminum AL-VME

  DIJET

  A tool with excellent abrasion resistance.
  Work material, Aluminum
  Single-edge blade
  Tool grade, Carbide
  Tip angle (θ) 90

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Chamfering/Horizontal	Aluminum[◎]	Single blade	-	NA	Non-Coated	-

  From: ₹ 5,126.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 120° Chamfering Type N 6714

  GUHRING

  Taper half-angle 60° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	120	-	-	-	-	Available	TiAlN	-

  From: ₹ 3,447.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Submarine Gate Cutter, 20°, 30°_CS-G

  YAMAWA MFG

  A specialized drill for use when machining submarine gates (tunnel gates) in the dies used for plastic injection molding.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6 ～ 8	20 ～ 30	Other	-	Single blade	NA	NA	-	-

  From: ₹ 2,102.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Drills 90°_PE-Q

  YAMAWA MFG

  The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4	125°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	NA	-	-

  From: ₹ 1,353.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Low Helix Center Drills-Type A 60°_CD-SL

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 12	60°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	NA	-	-

  From: ₹ 2,820.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cobalt high-speed steel counter sink (Co5), 3-fluted, 90°, CBN polish

  NOGA JAPAN

  [Features]
  · Noga Titanium Coated Countersinks are made of heat-treated HSS with a CBN ground blade and titanium nitride coating.
  · The deep sharp blade and accurate cutting ensure high precision and excellent cutting performance.
  · Recommended for steel, cast items, non-ferrous metals, and light metals.
  · More effective at relatively slow cutting speeds (10 to 20 m/min).

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	6.3 ～ 31	90	-	Stainless Steel[○]	Single blade	-	-	-	-

  From: ₹ 2,125.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Starting Drill GSS

  EIKOSHA

  Drill for positioning and chamfering.
  [Features]
  · TiN coating achieves longer life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 25	90 ～ 135	Centering (Positioning) / Hole Chamfer / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	Available	TiN	-

  From: ₹ 1,596.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Corner Radius Cutter CCRC

  EIKOSHA

  [Features]
  · A round chamfering cutter for corners.
  · Solid up to R2.5, attached blade from R3.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	NA	-	0.5 ～ 20

  From: ₹ 11,759.51
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

  7 LEADERS

  [Features]
  · 90° Carbide 2-Flute Chamfering V-Grooving End Mill
  · Use for V-grooving, horizontal chamfering, centering, hole chamfering.
  · Nanoparticle Multilayer Coating
  · Excellent lubricity and abrasion resistance.
  · Suitable for a wide range of work materials from general steel to aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	-	-	Available	Other	-

  From: ₹ 3,151.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Back Seat Mini Chamfer (120° Blade)

  NOGA JAPAN

  [Features]
  · A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 2 mm).
  · Ideal for machining.
  · Spiral blade provides smooth sharpness.
  · A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.
  [Applications]
  · Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
  · A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	2 ～ 5	120	-	-	-	-	-	TiAlN	-

  From: ₹ 5,924.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Reach Counterbore Mini Chamfer 90° Blade (For Deep Holes) Total Length 105 mm

  NOGA JAPAN

  [Features]
  · A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).
  · Ideal for machining.
  · Spiral blade provides smooth sharpness.
  · A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.
  · Mini chamfering 90° blade long shank type, overall length: 105 mm
  [Applications]
  · Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
  · A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	4 ～ 8	90	-	-	-	-	-	TiAlN	-

  From: ₹ 7,008.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade for Chamfer/Deburring【6-10 Pieces Per Package】

  NOGA JAPAN

  [Features]
  A blade for chamfering and deburring.
  Compatible main body: Compatible holder (EL04003), compatible handle (NG3000), compatible holder (UH1000, SC1400), compatible handle (NC5100), compatible handle (NC5200)

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	-	Other	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	-	-	-

  From: ₹ 671.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G

  THE CUT

  [Features]
  · The tool life is drastically improved through the use of 3 flutes and a TiN coating.
  · No chatter.
  · Capable of true circular machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 31	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: ₹ 3,386.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]
  ·Easy high-quality processing of corner radius
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	0.1 ～ 5

  From: ₹ 2,845.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • TS
  • SUS
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,456.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Center Drill, Long Model

  MISUMI

  The adoption of TiAlN coating with excellent wear resistance allows for the long service life and high-speed cutting.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiAlN	-

  From: ₹ 1,480.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model

  MISUMI

  Ideal for the hole chamfering of countersunk bolts with 90° chamfer.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	6.3 ～ 20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 1,724.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (positive type) HSCT-P

  OSG

  End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,228.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiCN	-

  From: ₹ 4,961.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-UCS Hole Chamfering, Countersink, V Coating

  OSG

  High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	60 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	Available	Available	Other	-

  From: ₹ 2,801.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	-	-	Available	TiAlN	-

  From: ₹ 4,202.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MT Shank, Countersink, HSS, Non-coated 90°

  ILIX

  Ideal for chamfering, countersinking, and deburring. For drilling machines.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	40 ～ 80	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	Available	NA	Non-Coated	-

  From: ₹ 19,241.27
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center chamfer mill

  FUKUDA

  A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	4 ～ 40	60 ～ 120	Centering (Positioning) / Hole Chamfer / V Groove / Drilling / Other	general steel[○] / Cast Iron[○] / Resin[○]	Single blade	Available	NA	Non-Coated	-

  From: ₹ 4,475.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Mini WR Chamfer Cutter

  EIKOSHA

  Carbide mini WR chamfering cutter capable of R chamfering on the top and bottom surfaces.
  [Features]
  ·Abrasion resistance is achieved by adopting TIAlN coating.
  ·Back and surface R chamfering.
  [Applications]
  ·R chamfering on the front and R chamfering on the back can be processed with this single tool.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3.8 ～ 13.4	-	Round Chamfer	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: ₹ 17,350.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Centering tool (taper shank)

  EIKOSHA

  Center Positioning, Plate/Internal Chamfering, External Chamfering, Morse Taper Shank

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 32	90 ～ 118	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: ₹ 11,266.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Center reamer

  FUKUDA

  A cutting tool used for finishing the center hole and chamfering.
  [Features]
  ·Because it is designed with an odd number of flutes, machining with little chatter is possible.
  ·A rich lineup of 60°, 90° and 120°.
  [Applications]
  ·Ideal for finishing center holes, as well as chamfering corners.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	60 ～ 120	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 1,984.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-CRC S Coated Corner Rounding Cutter

  SANKO MFG

  Cutter dedicated to round chamfering with TiCN coating.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	9 ～ 46	-	Round Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	NA	Available	TiCN	0.5 ～ 15

  From: ₹ 6,074.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, HG Center Drill Bit, A Type 60°

  IWATA TOOL

  [Features]
  · High-grade center drill for mass production.
  · Thoroughly improves tact time and achieves a stable life.
  · Center drill improved for mass production.
  · Small diameter sizes, in particular, boast life several times longer than conventional center drills

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	0.3 ～ 1	60	Centering (Positioning)	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	NA	NA	-	-

  From: ₹ 739.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, Center Drill Bit Long, A Type 90°

  IWATA TOOL

  [Features]
  · A center drill with high sharpness and outstanding durability.
  · Iwata Tool's center drills never stop evolving.
  · In addition to improving runout accuracy, the use of cobalt HSS and an optimized tool shape deliver excellent sharpness and help prevent breakages.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.8 ～ 6	90	Centering (Positioning)	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Double-edged	NA	NA	-	-

  From: ₹ 2,329.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	THE CUT	MISUMI	MISUMI	DIXI	Nine9	Nine9	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	FUJIGEN	FUJIGEN	FUJIGEN	TRUSCO NAKAYAMA	OKABE	OKABE	DIJET	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	NOGA JAPAN	EIKOSHA	EIKOSHA	7 LEADERS	NOGA JAPAN	NOGA JAPAN	NOGA JAPAN	THE CUT	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	DIXI	ILIX	FUKUDA	EIKOSHA	EIKOSHA	FUKUDA	SANKO MFG	IWATA TOOL	IWATA TOOL
Product Series	Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V	TS coated carbide chamfering end mill, 2-flute / short model	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral	Carbide NC Center Drill 1106	Carving Cutter for 45°	NC Spot Drill / Carving Cutter for 90°	HSS, SP Center, 90°	HSS, SP Center, 90° TiCN Coating	Corner Radius Cutter Carbide for Aluminum	Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating	Gentlemen	Multi Angle Mill	R Special	Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】	Center Drill, Okabe Standard, Type 1, Carbide 60°	Center Drill, Okabe Standard, JIS Type 1 60°	For Mentatsu aluminum AL-VME	Milling Cutter for 120° Chamfering Type N 6714	Submarine Gate Cutter, 20°, 30°_CS-G	Point Drills 90°_PE-Q	Long Shank Low Helix Center Drills-Type A 60°_CD-SL	Cobalt high-speed steel counter sink (Co5), 3-fluted, 90°, CBN polish	Starting Drill GSS	Carbide Corner Radius Cutter CCRC	Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X	Back Seat Mini Chamfer (120° Blade)	Long Reach Counterbore Mini Chamfer 90° Blade (For Deep Holes) Total Length 105 mm	Blade for Chamfer/Deburring【6-10 Pieces Per Package】	Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G	TS coated carbide inner R-cutter, 2-flute	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	TiAlN Coated High-Speed Steel Center Drill, Long Model	TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model	3-flute Chamfering Cutter (positive type) HSCT-P	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	V-UCS Hole Chamfering, Countersink, V Coating	Carbide Solid Chamfering Endmill 3-Flute	MT Shank, Countersink, HSS, Non-coated 90°	Center chamfer mill	Carbide Mini WR Chamfer Cutter	Centering tool (taper shank)	Center reamer	S-CRC S Coated Corner Rounding Cutter	HSS, HG Center Drill Bit, A Type 60°	HSS, Center Drill Bit Long, A Type 90°
CAD		2D / 3D	2D / 3D																											2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	₹ 14,520.76	₹ 3,560.00	₹ 3,909.85	₹ 3,746.84	₹ 9,730.24	₹ 11,208.47	₹ 671.00	₹ 1,012.55	₹ 6,434.42	₹ 9,083.75	₹ 54,347.22	₹ 43,800.84	₹ 37,654.35	₹ 2,525.09	₹ 9,800.31	₹ 882.64	₹ 5,126.22	₹ 3,447.56	₹ 2,102.82	₹ 1,353.44	₹ 2,820.65	₹ 2,125.96	₹ 1,596.36	₹ 11,759.51	₹ 3,151.56	₹ 5,924.49	₹ 7,008.05	₹ 4,753.20	₹ 3,386.38	₹ 2,845.24	₹ 4,456.00	₹ 1,480.00	₹ 1,724.20	₹ 8,228.25	₹ 4,961.47	₹ 2,801.02	₹ 4,202.24	₹ 19,241.27	₹ 4,475.55	₹ 17,350.49	₹ 11,266.24	₹ 1,984.75	₹ 6,074.51	₹ 739.31	₹ 2,329.18
Days to Ship	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications		TS General Steel 2 Flutes S (Short)	Non-Coated Aluminum 2 Flutes																											TS General Steel 2 Flutes	TS SUS 2 Flutes
Tool Material Type	Carbide	Carbide	Carbide	Carbide	-	-	High-speed steel	High-speed steel	Carbide	Carbide	-	-	-	High-speed steel	Carbide	High-speed steel	Carbide	Carbide	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	Carbide	Carbide	-	-	High-speed steel	High-speed steel	Carbide	Carbide	High-speed steel	Cobalt HSS	Carbide	Powder high-speed steel	High-speed steel	Carbide	High-speed steel	Cobalt HSS	Carbide	Cobalt HSS	High-speed steel	Cobalt HSS	Cobalt HSS	High-speed steel
Tool Diameter (D)(mm)	2.8 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	6	10	0.3 ～ 9	0.3 ～ 9	3 ～ 5	3 ～ 5	50.7 ～ 73.3	-	56	-	0.3 ～ 6	0.7 ～ 5	3 ～ 10	4 ～ 12	6 ～ 8	4	4 ～ 12	6.3 ～ 31	3 ～ 25	-	0.5 ～ 20	2 ～ 5	4 ～ 8	-	6.3 ～ 31	-	3 ～ 12	1 ～ 4	6.3 ～ 20.5	1 ～ 2	-	4.3 ～ 37	2 ～ 12	40 ～ 80	4 ～ 40	3.8 ～ 13.4	10 ～ 32	-	9 ～ 46	0.3 ～ 1	0.8 ～ 6
Tip angle (θ)	90°	60 ～ 120	90	90	45	90	90	90	-	-	15 ～ 75	0–90	-	90	60	60	90	120	20 ～ 30	125°	60°	90	90 ～ 135	-	90	120	90	-	90	-	90	-	-	90	-	60 ～ 120	90	90	60 ～ 120	-	90 ～ 118	60 ～ 120	-	60	90
Application	Hole Chamfer / Drilling / Other	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Other	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Round Chamfer	Round Chamfer	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Round Chamfer	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning)	Centering (Positioning)	Chamfering/Horizontal	-	Other	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	-	Centering (Positioning) / Hole Chamfer / Drilling	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	-	-	Other	Hole Chamfer	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning)	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer	Centering (Positioning) / Hole Chamfer / V Groove / Drilling / Other	Round Chamfer	Centering (Positioning) / Chamfering/Horizontal	Hole Chamfer	Round Chamfer	Centering (Positioning)	Centering (Positioning)
work material	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[◎]	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[○]	Aluminum[◎]	-	-	-	-	Stainless Steel[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Cast Iron[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]
Single blade, two blades	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade / Double-edged	Single blade / Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade / Double-edged	Double-edged	Single blade	-	Single blade	Double-edged	Double-edged	Single blade	-	-	-	-	-	-	Single blade	Single blade	Single blade	Double-edged	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	-	-	Single blade	-	Single blade	Double-edged
Peripheral Blade Y/N	-	Available	NA	-	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	-	-	NA	NA	NA	-	-	-	-	-	-	-	-	NA	NA	NA	NA	NA	NA	Available	-	Available	Available	-	-	NA	NA	NA	NA
Coating Y/N	Available	Available	NA	NA	NA	NA	NA	Available	NA	Available	NA	NA	NA	Available	NA	NA	NA	Available	NA	NA	NA	-	Available	NA	Available	-	-	-	Available	Available	Available	Available	Available	NA	Available	Available	Available	NA	NA	-	-	NA	Available	NA	NA
Coating Type	TiAlN	TS	-	-	Non-Coated	Non-Coated	-	TiCN	-	Other	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	TiAlN	-	-	-	-	TiN	-	Other	TiAlN	TiAlN	-	TiN	TS	TS	TiAlN	TiAlN	Non-Coated	TiCN	Other	TiAlN	Non-Coated	Non-Coated	-	-	Non-Coated	TiCN	-	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	0.5 ～ 3	0.5 ～ 3	-	-	0.5~5	-	-	-	-	-	-	-	-	-	-	0.5 ～ 20	-	-	-	-	-	0.1 ～ 5	-	-	-	-	-	-	-	-	-	-	-	-	0.5 ～ 15	-	-

Loading...