• You can add up to 6 items per a category to the compare list. Compare

  

  C-Cutter Mini, 1-Flute Front/Back-Chamfering Type

  BIG DAISHOWA SEIKI

  [Features]
  · 1-flute type front and back chamfering "C-Cutter Mini" high performance chamfering cutter that achieves ultra-high feed rates and a compact size.
  · Ultra-high feed machining achieves dramatic reductions in chamfering time.
  · Supports a wide range of machining, such as front chamfering, back chamfering, and face milling.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	45°	Chamfering/Horizontal	-	-	NA	-	-	-

  From: ₹ 9,897.58
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill 90° J557

  GUHRING

  Allows simultaneous centering and chamfering. Cobalt HSS boasts excellent heat and abrasion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 20	90	Centering (Positioning) / Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 2,599.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Helix Center Drills-JIS Type B 60°_CESB

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3.15 ～ 31.5	60°	Centering (Positioning) / Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Double-edged	NA	NA	-	-

  From: ₹ 1,135.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cobalt high-speed steel counter sink (Co5), 3-fluted, 90°, CBN polish

  NOGA JAPAN

  [Features]
  · Noga Titanium Coated Countersinks are made of heat-treated HSS with a CBN ground blade and titanium nitride coating.
  · The deep sharp blade and accurate cutting ensure high precision and excellent cutting performance.
  · Recommended for steel, cast items, non-ferrous metals, and light metals.
  · More effective at relatively slow cutting speeds (10 to 20 m/min).

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	6.3 ～ 31	90	-	Stainless Steel[○]	Single blade	-	-	-	-

  From: ₹ 2,125.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Milling (Tapered Shank) CFT

  EIKOSHA

  [Features]
  · It is for center hole finish and chamfer finish.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	40 ～ 100	60 ～ 90	Hole Chamfer	general steel[○] / Aluminum[○] / Copper[○]	-	-	NA	-	-

  From: ₹ 22,322.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering Cutter KMC-2

  KYOWA SEIKO

  [Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 4	90°	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 3,217.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,904.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide inner R-cutter, 2-flute

  MISUMI

  Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	NA	-	0.15 ～ 5

  From: ₹ 3,471.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack

  MISUMI

  Carbide spot drill that contributes to higher efficiency in chamfering

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	NA	Available	TiAlN	-

  From: ₹ 1,998.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack

  MISUMI

  TiAlN coated type of the popular spot drill

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 12	90	Centering (Positioning) / Hole Chamfer	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 999.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High-Speed Steel Center Drill, Long / New JIS, Model A

  MISUMI

  [Features]
  ·Necessary items for positioning processing
  ·Non-coated high-speed steel double-edged 2-flute tip angle 120° (New JIS A type)
  ·Effective for positioning processing in deep places

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 5	-	Centering (Positioning)	general steel[○]	Double-edged	NA	NA	-	-

  From: ₹ 1,036.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill Standard NC-LDS

  OSG

  Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	90 ～ 130	Centering (Positioning) / Hole Chamfer	general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 970.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[◎] / Copper[◎] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,281.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SV Spiral Chamfer Cutter

  UNION TOOL

  [Features]
  · Carbide spiral chamfering cutter
  · Half Taper Angle of 45°
  · The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 6,426.76
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-UCS Hole Chamfering, Countersink, V Coating

  OSG

  High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	60 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	Available	Available	Other	-

  From: ₹ 2,801.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	-	-	Available	TiAlN	-

  From: ₹ 4,202.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, HSS, TiN Coating 90°

  ILIX

  Ideal for chamfering, countersinking, and deburring. Can be used for both machine work and manual work.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TiN	-

  From: ₹ 2,974.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  60° NC Spot Drill

  Nine9

  Carbide insert type NC spot drill. High efficiency! Low cost! For CNC lathes, CNC compound lathes, and machining centers

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16	60	Centering (Positioning) / Hole Chamfer	-	Single blade	NA	NA	Non-Coated	-

  From: ₹ 14,600.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spot Drill / Corner Radius Cutter for 90°

  Nine9

  Carbide insert type NC spot drill. High efficiency! Low cost! Ideal for CNC lathes and machining centers. Inserts that can process corner radii can also be used.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16 ～ 20	90	Centering (Positioning) / Hole Chamfer	-	Single blade	NA	NA	Non-Coated	-

  From: ₹ 12,668.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, HG Center Drill Bit, A Type 60°

  IWATA TOOL

  [Features]
  · High-grade center drill for mass production.
  · Thoroughly improves tact time and achieves a stable life.
  · Center drill improved for mass production.
  · Small diameter sizes, in particular, boast life several times longer than conventional center drills

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	0.3 ～ 1	60	Centering (Positioning)	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	NA	NA	-	-

  From: ₹ 739.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center 60°

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 671.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, Center Drill Bit Long, A Type 90°

  IWATA TOOL

  [Features]
  · A center drill with high sharpness and outstanding durability.
  · Iwata Tool's center drills never stop evolving.
  · In addition to improving runout accuracy, the use of cobalt HSS and an optimized tool shape deliver excellent sharpness and help prevent breakages.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.8 ～ 6	90	Centering (Positioning)	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Double-edged	NA	NA	-	-

  From: ₹ 2,329.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating

  IWATA TOOL

  [Features]
  · The raking blades/flutes ensure a highly precise rounded form.
  · First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracy

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 5	-	Round Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Single blade	NA	Available	Other	0.5 ～ 3

  From: ₹ 9,083.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 120°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.4 ～ 16	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 1,293.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi Angle Mill

  FUJIGEN

  [Features]
  · Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.
  · 0° to 90° at 5° pitch for easy, reliable angle adjustment

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	0–90	Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 43,800.84
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Baitender

  FUJIGEN

  [Features]
  · Turning tool type. Telescopic turning tool enables a wide range of chamfering.
  · Hole chamfering capacity: φ28 mm - φ134 mm.
  · Uses the T32 type tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	49.85～134.6	45	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 24,375.60
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special Jr.

  FUJIGEN

  Single flute replaceable insert for round chamfering of R0.5 to R5 and also for small diameter round chamfering.
  Using Fujigen's unique negative/positive method, it is possible to cut R5 in a single process.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	25	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: ₹ 13,450.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RC Hand Cutter

  FUJIGEN

  Round chamfering and C chamfering of R1, R2, and R3 are possible by exchanging the insert.
  The unique insert replacement method makes insert replacement fast and accurate.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	25	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	1–3

  From: ₹ 13,450.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3 mm Shank for Pointing Drill Tip 120° Steel (TiAℓN coated)

  ATOM

  Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 3	120	Centering (Positioning) / Drilling	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎]	Single blade	Available	Available	TiAlN	-

  From: ₹ 4,182.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink (Titanium Coating)【1-6 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.
  · Its surface has high hardness due to the surface titanium coating and has improved heat and wear resistance as well as sharpness compared to cobalt high-strength steel.
  · It easily expels chips because it uses 3 flute edges, providing a beautiful finish.
  [Applications]
  · Work materials: Iron, casting, stainless steel.
  · Chamfering.
  · Deburring.
  · For countersinking.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	Available	TiN	-

  From: ₹ 2,460.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, Type 1, Carbide 90°

  OKABE

  Because it uses carbide materials, it has both high hardness and elasticity. It is a center drill manufactured with one of the best heat treatment, and can be used for machining general steel, heat-treated steel, stainless steel, cast iron, etc.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 6	90	Centering (Positioning)	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Double-edged	NA	NA	Non-Coated	-

  From: ₹ 9,260.55
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R-Cutter Front Round Chamfer

  BIG DAISHOWA SEIKI

  [Features]
  · Automates rounded chamfering. Supports front round chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	45°	Round Chamfer	-	-	NA	-	-	0.5/1/1.5/2 ～ 1/2/3/4

  From: ₹ 13,054.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 120° Chamfering Type N 6714

  GUHRING

  Taper half-angle 60° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	120	-	-	-	-	Available	TiAlN	-

  From: ₹ 3,447.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink 3-Flute 90° 476

  GUHRING

  Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 31	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 1,544.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Helix Center Drills-Type A 90°, Coated_CD-Q-V

  YAMAWA MFG

  For drilling 90° center holes, it is a weak helix groove A-type center hole drill that can process positioning and chamfering at the same time, and has a coating with excellent wear and adhesion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 18	90°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: ₹ 2,677.42
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Drills 90°_PE-Q

  YAMAWA MFG

  The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4	125°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	NA	-	-

  From: ₹ 1,353.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank High Helix Center Drills-Type A 90°_CE-QL

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 12	90°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	NA	-	-

  From: ₹ 3,395.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint- High Helix Center Drills-Type A 60°_JO-CES

  YAMAWA MFG

  [Specifications]
  · Shape: Centering/countersink
  · Coating: Non-Coated
  · Tool material: HSS
  [Applications] Centering (positioning) / hole chamfering

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	10 ～ 16	60°	Centering (Positioning) / Hole Chamfer	-	Single blade	NA	NA	-	-

  From: ₹ 1,857.71
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drills-Type A 60°_C-CD-S

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 18	60°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	NA	-	-

  From: ₹ 7,035.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Starting Drill GSS

  EIKOSHA

  Drill for positioning and chamfering.
  [Features]
  · TiN coating achieves longer life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 25	90 ～ 135	Centering (Positioning) / Hole Chamfer / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	Available	TiN	-

  From: ₹ 1,596.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Corner Radius Cutter CCRC

  EIKOSHA

  [Features]
  · A round chamfering cutter for corners.
  · Solid up to R2.5, attached blade from R3.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	NA	-	0.5 ～ 20

  From: ₹ 11,759.51
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Umbrella-type cutter with handle PCS

  EIKOSHA

  [Features]
  · Front (with end blade) cutting and chamfering are possible.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel / Cobalt HSS	15 ～ 100	60 ～ 90	Hole Chamfer	general steel[○] / Aluminum[○] / Copper[○]	-	-	NA	-	-

  From: ₹ 6,174.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Corner Round Cutter MCRC (SKH56)

  TAIYO-TOOL

  [Applications]
  · Round chamfer
  [Single Blade / Double Blade]
  · Single blade
  [Tool Grade]
  · High-speed steel
  [Coating Y/N] N
  [Coating Type] Non-Coated
  [Flute No.] 1-Flute

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	2.6 ～ 23	-	Round Chamfer	-	Single blade	-	NA	Non-Coated	0.3 ～ 10

  From: ₹ 7,355.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink (For Outer Diameter Chamfering)

  NOGA JAPAN

  [Features]
  · KOPAL chamfer unit is made of a combination of a body, blade, and guide.
  · Conical guide serves to align the workpiece, and its height can be adjusted with a spring.
  · HSS steel blade can be locked with a nut to set the blade projection length.
  [Applications]
  · Outer diameter chamfering.
  · For chamfering end faces of round bars, square rods, etc.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	-	-	-	-	-	-

  From: ₹ 23,234.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter NC Spot Drill (Chip)

  Nine9

  [Features]
  ·Insert for NC spot drill holder.
  ·Momitsuke and chamfering are integrated into one process.
  ·The tip angle of 145° prevents drill shoulder chipping.
  [Applications]
  ·For CNC lathes, CNC compound lathes, and machining centers for drilling pilot holes for tapping
  ·Applying kneading only at 145°
  ·Chamfering, V-grooving.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	145+90	-	-	-	-	Available	TiAlN	-

  From: ₹ 4,972.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	BIG DAISHOWA SEIKI	GUHRING	YAMAWA MFG	NOGA JAPAN	EIKOSHA	KYOWA SEIKO	MAKOTOLOY	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	UNION TOOL	OSG	DIXI	ILIX	Nine9	Nine9	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	ATOM	TRUSCO NAKAYAMA	OKABE	BIG DAISHOWA SEIKI	GUHRING	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	EIKOSHA	EIKOSHA	EIKOSHA	TAIYO-TOOL	NOGA JAPAN	Nine9
Product Series	C-Cutter Mini, 1-Flute Front/Back-Chamfering Type	NC Spotting Drill 90° J557	High Helix Center Drills-JIS Type B 60°_CESB	Cobalt high-speed steel counter sink (Co5), 3-fluted, 90°, CBN polish	Center Milling (Tapered Shank) CFT	Carbide Chamfering Cutter KMC-2	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°	Carbide inner R-cutter, 2-flute	TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack	TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack	High-Speed Steel Center Drill, Long / New JIS, Model A	Leading Drill Standard NC-LDS	2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC	SV Spiral Chamfer Cutter	V-UCS Hole Chamfering, Countersink, V Coating	Carbide Solid Chamfering Endmill 3-Flute	Straight Shank, Countersink, HSS, TiN Coating 90°	60° NC Spot Drill	NC Spot Drill / Corner Radius Cutter for 90°	HSS, HG Center Drill Bit, A Type 60°	HSS SP Center 60°	HSS, Center Drill Bit Long, A Type 90°	Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating	Carbide SP Center 120°	Multi Angle Mill	Baitender	R Special Jr.	RC Hand Cutter	3 mm Shank for Pointing Drill Tip 120° Steel (TiAℓN coated)	Counter Sink (Titanium Coating)【1-6 Pieces Per Package】	Center Drill, Okabe Standard, Type 1, Carbide 90°	R-Cutter Front Round Chamfer	Milling Cutter for 120° Chamfering Type N 6714	Straight Shank, Countersink 3-Flute 90° 476	Low Helix Center Drills-Type A 90°, Coated_CD-Q-V	Point Drills 90°_PE-Q	Long Shank High Helix Center Drills-Type A 90°_CE-QL	Joint- High Helix Center Drills-Type A 60°_JO-CES	Carbide Center Drills-Type A 60°_C-CD-S	Starting Drill GSS	Carbide Corner Radius Cutter CCRC	Umbrella-type cutter with handle PCS	Mini Corner Round Cutter MCRC (SKH56)	Counter Sink (For Outer Diameter Chamfering)	Chamfering Cutter NC Spot Drill (Chip)
CAD								2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	₹ 9,897.58	₹ 2,599.73	₹ 1,135.95	₹ 2,125.96	₹ 22,322.80	₹ 3,217.20	₹ 11,904.04	₹ 3,471.11	₹ 1,998.00	₹ 999.00	₹ 1,036.00	₹ 970.07	₹ 9,281.02	₹ 6,426.76	₹ 2,801.02	₹ 4,202.24	₹ 2,974.38	₹ 14,600.16	₹ 12,668.75	₹ 739.31	₹ 671.00	₹ 2,329.18	₹ 9,083.75	₹ 1,293.82	₹ 43,800.84	₹ 24,375.60	₹ 13,450.16	₹ 13,450.16	₹ 4,182.89	₹ 2,460.24	₹ 9,260.55	₹ 13,054.53	₹ 3,447.56	₹ 1,544.29	₹ 2,677.42	₹ 1,353.44	₹ 3,395.25	₹ 1,857.71	₹ 7,035.33	₹ 1,596.36	₹ 11,759.51	₹ 6,174.31	₹ 7,355.93	₹ 23,234.35	₹ 4,972.18
Days to Ship	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more
Specifications
Tool Material Type	-	Cobalt HSS	High-speed steel	Cobalt HSS	High-speed steel	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	High-speed steel	High-speed steel	Carbide	Carbide	High-speed steel	Carbide	High-speed steel	-	-	Cobalt HSS	High-speed steel	High-speed steel	Carbide	Carbide	-	-	-	-	Carbide	Cobalt HSS	Carbide	-	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Cobalt HSS	Carbide	High-speed steel / Cobalt HSS	High-speed steel	-	-
Tool Diameter (D)(mm)	-	3 ～ 20	3.15 ～ 31.5	6.3 ～ 31	40 ～ 100	0.3 ～ 4	3 ～ 20	-	2 ～ 12	2 ～ 12	1 ～ 5	3 ～ 25	0.8 ～ 1	0.8 ～ 1	4.3 ～ 37	2 ～ 12	4.3 ～ 37	16	16 ～ 20	0.3 ～ 1	0.3 ～ 9	0.8 ～ 6	3 ～ 5	0.4 ～ 16	-	49.85～134.6	25	25	0.03 ～ 3	-	0.3 ～ 6	-	4 ～ 12	4.3 ～ 31	4 ～ 18	4	4 ～ 12	10 ～ 16	4 ～ 18	3 ～ 25	-	15 ～ 100	2.6 ～ 23	-	-
Tip angle (θ)	45°	90	60°	90	60 ～ 90	90°	90	-	90 ～ 120	90	-	90 ～ 130	90	90	60 ～ 120	90	90	60	90	60	60	90	-	120	0–90	45	-	-	120	90	90	45°	120	90	90°	125°	90°	60°	60°	90 ～ 135	-	60 ～ 90	-	-	145+90
Application	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	-	Hole Chamfer	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Round Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Round Chamfer	Round Chamfer	Centering (Positioning) / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning)	Round Chamfer	-	Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Drilling	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Hole Chamfer	Round Chamfer	-	-
work material	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Stainless Steel[○]	general steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○]	general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	-	-	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	-	-	-	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Aluminum[○] / Copper[○]	-	-	-
Single blade, two blades	-	Single blade	Double-edged	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade / Double-edged	Double-edged	Single blade	Single blade / Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged	-	-	Single blade	Double-edged	Double-edged	Double-edged	Single blade	Double-edged	-	-	-	Single blade	-	-
Peripheral Blade Y/N	NA	-	NA	-	-	-	-	NA	NA	NA	NA	NA	NA	NA	Available	-	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	-	-	NA	NA	NA	NA	NA	-	-	-	-	-	-
Coating Y/N	-	NA	NA	-	NA	NA	Available	NA	Available	Available	NA	NA	NA	NA	Available	Available	Available	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	NA	Available	Available	NA	-	Available	NA	Available	NA	NA	NA	NA	Available	NA	NA	NA	-	Available
Coating Type	-	-	-	-	-	-	TiAlN	-	TiAlN	TiAlN	-	Non-Coated	Non-Coated	-	Other	TiAlN	TiN	Non-Coated	Non-Coated	-	-	-	Other	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiN	Non-Coated	-	TiAlN	-	TiN	-	-	-	-	TiN	-	-	Non-Coated	-	TiAlN
R Size (R)(mm)	-	-	-	-	-	-	-	0.15 ～ 5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 ～ 3	-	-	-	0.5~5	1–3	-	-	-	0.5/1/1.5/2 ～ 1/2/3/4	-	-	-	-	-	-	-	-	0.5 ～ 20	-	0.3 ～ 10	-	-

Loading...