• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Spot Drill

  Nine9

  Insert for NC spot drill holder.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1–6 ～ 3 to 15	60 ～ 90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiAlN / TiN / DLC	-

  From: ₹ 3,043.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 90° Chamfering Type N 6713

  GUHRING

  Taper half-angle 45° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	90	-	-	-	-	Available	TiAlN	-

  From: ₹ 3,312.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Engraving Cutter

  Nine9

  The special insert design realizes an ultra-long operating life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.45～2.1 ～ 0.65～2.7	45 ～ 60	Centering (Positioning) / Engraved	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiAlN / TiN	-

  From: ₹ 3,639.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables higher speed and longer service life compared to NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Single blade	NA	Available	TiN	-

  From: ₹ 1,437.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V

  THE CUT

  [Features]
  · No need to turn over the work material. (Also removes through-hole burrs)
  · Both sides can be chamfered with the one cutter tool.
  · Ultra-fine particle carbide with TiAlN coating for a longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2.8 ～ 12	90°	Hole Chamfer / Drilling / Other	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 14,520.76
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, Type 1, G Coating 60°

  OKABE

  Because it is made of high-speed steel, it has high hardness. It is a center drill manufactured with one of the best heat treatment, making it suitable for machining general steel, stainless steel, cast iron and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 6	60	Centering (Positioning)	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiN	-

  From: ₹ 1,754.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Helix Center Drills-Type A 90°, Coated_CD-Q-V

  YAMAWA MFG

  For drilling 90° center holes, it is a weak helix groove A-type center hole drill that can process positioning and chamfering at the same time, and has a coating with excellent wear and adhesion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 18	90°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: ₹ 2,677.42
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long

  MISUMI

  Carbide center drill that's ideal for centering in mass production drilling

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 5	-	Centering (Positioning)	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Double-edged	NA	Available	TiAlN	-

  From: ₹ 3,078.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Center Drill, A Type, 60°, TiCN Coating

  IWATA TOOL

  [Features]
  · A center drill with high sharpness and outstanding durability.
  · Iwata Tool's center drills never stop evolving.
  · In addition to improving runout accuracy, the use of cobalt HSS and an optimized tool shape deliver excellent sharpness and help prevent breakages.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.5	60	Centering (Positioning)	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiCN	-

  From: ₹ 2,721.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Hard SP 90° ALD Coating

  IWATA TOOL

  [Features]
  · HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	Other	-

  From: ₹ 6,517.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Bit, B-Type, ALD Coating

  IWATA TOOL

  [Features]
  · The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
  · Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 6.3	60	Centering (Positioning)	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Double-edged	NA	Available	Other	-

  From: ₹ 7,207.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-away Tip for C-Cutter Boy

  BIG DAISHOWA SEIKI

  [Features]
  · An economical type with long life that allows 3 corners of the carbide tip to be used

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	45	Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	-	-	Available	Other	0.4

  From: ₹ 1,680.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 60° Chamfering Type N 6711

  GUHRING

  Taper half-angle 30° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	60	-	-	-	-	Available	TiAlN	-

  From: ₹ 3,223.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]
  ·Ideal for chamfering and V-groove
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,132.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-CRC S Coated Corner Rounding Cutter

  SANKO MFG

  Cutter dedicated to round chamfering with TiCN coating.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	9 ～ 46	-	Round Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	NA	Available	TiCN	0.5 ～ 15

  From: ₹ 6,074.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,203.09
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
  ·Peripheral flutes enable inclined, contour and helical cutting
  ·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
  ·With helix angle on the peripheral flutes
  ·Can also be used as a deburring tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: ₹ 4,434.02
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated / Non-Coated High-Speed Steel NC Spot Drill

  MISUMI

  Long service life that's made possible by the coating technology. Ideal for Hole Chamfering and Centering

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 20	90 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 444.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Center Drill, Regular Model

  MISUMI

  TiAlN coated type of the popular center drill

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiAlN	-

  From: ₹ 976.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated High-Speed Steel Countersink / 3-Flute / 90°

  MISUMI

  Necessities in hole chamfering and deburring are available at low prices

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 1,472.87
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-UCS Hole Chamfering, Countersink, V Coating

  OSG

  High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	60 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	Available	Available	Other	-

  From: ₹ 2,801.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, HSS, TiN Coating 90°

  ILIX

  Ideal for chamfering, countersinking, and deburring. Can be used for both machine work and manual work.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TiN	-

  From: ₹ 2,974.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90° TiCN Coating

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: ₹ 1,012.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Bit, A Type High Helix 60°, ALD Coating

  IWATA TOOL

  [Features]
  · The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
  · Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 6	60	Centering (Positioning)	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Double-edged	NA	Available	Other	-

  From: ₹ 4,117.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Eagle Cut For (M4-M6) Tip

  FUJIGEN

  An indexable insert that can perform counterbore.
  [Applications]It is used for counterboring.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Available	TiAlN	-

  From: ₹ 1,090.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3 mm Shank for Pointing Drill Tip 120° Steel (TiAℓN coated)

  ATOM

  Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 3	120	Centering (Positioning) / Drilling	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎]	Single blade	Available	Available	TiAlN	-

  From: ₹ 4,182.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill 120° F724

  GUHRING

  Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	5 ～ 20	120	Centering (Positioning) / Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	Other	-

  From: ₹ 6,631.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Point Drills 90°, Coated_C-PE-Q-V

  YAMAWA MFG

  The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	125°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiAlN	-

  From: ₹ 7,145.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

  7 LEADERS

  [Features]
  · 90° Carbide 2-Flute Chamfering V-Grooving End Mill
  · Use for V-grooving, horizontal chamfering, centering, hole chamfering.
  · Nanoparticle Multilayer Coating
  · Excellent lubricity and abrasion resistance.
  · Suitable for a wide range of work materials from general steel to aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	-	-	Available	Other	-

  From: ₹ 3,151.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter NC Spot Drill (Chip)

  Nine9

  [Features]
  ·Insert for NC spot drill holder.
  ·Momitsuke and chamfering are integrated into one process.
  ·The tip angle of 145° prevents drill shoulder chipping.
  [Applications]
  ·For CNC lathes, CNC compound lathes, and machining centers for drilling pilot holes for tapping
  ·Applying kneading only at 145°
  ·Chamfering, V-grooving.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	145+90	-	-	-	-	Available	TiAlN	-

  From: ₹ 4,972.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,904.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Corner Rounding Cutter, Carbide C-CRC-V

  THE CUT

  [Features]
  · Ideal for CNC machining.
  · Capable of machining extremely thin workpieces.
  · Simple regrinding/repolishing.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2.5	-	Round Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	-	Available	TiAlN	0.25 ～ 2.5

  From: ₹ 6,158.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G

  THE CUT

  [Features]
  · The tool life is drastically improved through the use of 3 flutes and a TiN coating.
  · No chatter.
  · Capable of true circular machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 31	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: ₹ 3,386.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: ₹ 4,684.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]
  ·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: ₹ 5,127.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering. Can also be used as a deburring tool
  ·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
  ·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: ₹ 3,560.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]
  ·Easy high-quality processing of corner radius
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	0.1 ～ 5

  From: ₹ 2,845.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,456.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	10 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	-	-

  From: ₹ 3,281.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model

  MISUMI

  A single tool with high efficiency that's capable of all centering, chamfering and V grooving

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 2	60 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	Available	Available	TiAlN	-

  From: ₹ 2,464.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack

  MISUMI

  Carbide spot drill that contributes to higher efficiency in chamfering

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	NA	Available	TiAlN	-

  From: ₹ 1,998.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated Carbide Center Drill, 90° Chamfering Model

  MISUMI

  Carbide center drill that's ideal for centering in mass production drilling

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 4	-	Centering (Positioning)	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Double-edged	NA	Available	TiAlN	-

  From: ₹ 4,306.80
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack

  MISUMI

  A carbide countersink that's essential in chamfering and deburring

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	6.3 ～ 20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	NA	Available	TiAlN	-

  From: ₹ 4,580.60
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model

  MISUMI

  A single tool with high efficiency that's capable of all centering, chamfering and V grooving

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 12	90	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 1,598.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack

  MISUMI

  TiAlN coated type of the popular spot drill

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 12	90	Centering (Positioning) / Hole Chamfer	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 999.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	Nine9	GUHRING	Nine9	OSG	THE CUT	OKABE	YAMAWA MFG	MISUMI	IWATA TOOL	IWATA TOOL	IWATA TOOL	BIG DAISHOWA SEIKI	GUHRING	MISUMI	SANKO MFG	MAKOTOLOY	MISUMI	MISUMI	MISUMI	MISUMI	OSG	ILIX	IWATA TOOL	IWATA TOOL	FUJIGEN	ATOM	GUHRING	YAMAWA MFG	7 LEADERS	Nine9	MAKOTOLOY	THE CUT	THE CUT	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Insert for Spot Drill	Milling Cutter for 90° Chamfering Type N 6713	Insert for Engraving Cutter	Leading Drill TIN-NC-LDS	Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V	Center Drill, Okabe Standard, Type 1, G Coating 60°	Low Helix Center Drills-Type A 90°, Coated_CD-Q-V	TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long	HSS Center Drill, A Type, 60°, TiCN Coating	Toglon Hard SP 90° ALD Coating	Carbide Center Drill Bit, B-Type, ALD Coating	Throw-away Tip for C-Cutter Boy	Milling Cutter for 60° Chamfering Type N 6711	TS coated carbide chamfer, V grooving end mill, 2-flute	S-CRC S Coated Corner Rounding Cutter	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°	TS coated carbide chamfering end mill, 3-flute / short model	TiN Coated / Non-Coated High-Speed Steel NC Spot Drill	TiAlN Coated High-Speed Steel Center Drill, Regular Model	TiN Coated High-Speed Steel Countersink / 3-Flute / 90°	V-UCS Hole Chamfering, Countersink, V Coating	Straight Shank, Countersink, HSS, TiN Coating 90°	HSS, SP Center, 90° TiCN Coating	Carbide Center Drill Bit, A Type High Helix 60°, ALD Coating	Eagle Cut For (M4-M6) Tip	3 mm Shank for Pointing Drill Tip 120° Steel (TiAℓN coated)	NC Spotting Drill 120° F724	Carbide Point Drills 90°, Coated_C-PE-Q-V	Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X	Chamfering Cutter NC Spot Drill (Chip)	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°	Mini Corner Rounding Cutter, Carbide C-CRC-V	Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 2-flute / short model	TS coated carbide inner R-cutter, 2-flute	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model	TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack	TiAlN Coated Carbide Center Drill, 90° Chamfering Model	TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack	TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model	TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack
CAD								2D / 3D						2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D														2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	₹ 3,043.65	₹ 3,312.29	₹ 3,639.69	₹ 1,437.53	₹ 14,520.76	₹ 1,754.58	₹ 2,677.42	₹ 3,078.40	₹ 2,721.62	₹ 6,517.45	₹ 7,207.25	₹ 1,680.40	₹ 3,223.89	₹ 4,132.20	₹ 6,074.51	₹ 11,203.09	₹ 4,434.02	₹ 444.00	₹ 976.00	₹ 1,472.87	₹ 2,801.02	₹ 2,974.38	₹ 1,012.55	₹ 4,117.27	₹ 1,090.24	₹ 4,182.89	₹ 6,631.31	₹ 7,145.44	₹ 3,151.56	₹ 4,972.18	₹ 11,904.04	₹ 6,158.93	₹ 3,386.38	₹ 4,684.04	₹ 5,127.56	₹ 3,560.00	₹ 2,845.24	₹ 4,456.00	₹ 3,281.98	₹ 2,464.20	₹ 1,998.00	₹ 4,306.80	₹ 4,580.60	₹ 1,598.40	₹ 999.00
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications
Tool Material Type	Carbide	Carbide	Carbide	High-speed steel	Carbide	High-speed steel	High-speed steel	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	-	Carbide	Carbide	Carbide	Carbide	-	Carbide	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Cobalt HSS
Tool Diameter (D)(mm)	1–6 ～ 3 to 15	4 ～ 12	0.45～2.1 ～ 0.65～2.7	3 ～ 25	2.8 ～ 12	0.3 ～ 6	4 ～ 18	0.5 ～ 5	0.5	0.6 ～ 4	1 ～ 6.3	-	4 ～ 12	3 ～ 16	9 ～ 46	1 ～ 20	3 ～ 12	2 ～ 20	1 ～ 4	6.3 ～ 20.5	4.3 ～ 37	4.3 ～ 37	0.3 ～ 9	1 ～ 6	-	0.03 ～ 3	5 ～ 20	3 ～ 16	0.5 ～ 20	-	3 ～ 20	1 ～ 2.5	6.3 ～ 31	3 ～ 12	3 ～ 12	3 ～ 12	-	3 ～ 12	10 ～ 25	0.5 ～ 2	2 ～ 12	1 ～ 4	6.3 ～ 20.5	3 ～ 12	2 ～ 12
Tip angle (θ)	60 ～ 90	90	45 ～ 60	60 ～ 120	90°	60	90°	-	60	90	60	45	60	60 ～ 120	-	90	90	90 ～ 120	-	-	60 ～ 120	90	90	60	-	120	120	125°	90	145+90	90	-	90	90	90	60 ～ 120	-	90	60 ～ 120	60 ～ 120	90 ～ 120	-	-	90	90
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	-	Centering (Positioning) / Engraved	Centering (Positioning) / Hole Chamfer	Hole Chamfer / Drilling / Other	Centering (Positioning)	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Chamfering/Horizontal	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Hole Chamfer	Hole Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Hole Chamfer	Centering (Positioning) / Drilling	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Round Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	-	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Quenched and tempered steel[○] / high hardness steel[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	-	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	-	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Single blade, two blades	Single blade	-	Single blade	Single blade	Single blade	Double-edged	Double-edged	Double-edged	Double-edged	Single blade	Double-edged	-	-	Single blade	-	Single blade	Single blade	Single blade	Double-edged	Single blade	Single blade	Single blade	Single blade / Double-edged	Double-edged	-	Single blade	Single blade	Double-edged	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged	Single blade	Single blade	Single blade
Peripheral Blade Y/N	NA	-	NA	NA	-	NA	NA	NA	NA	NA	NA	-	-	NA	NA	-	Available	NA	NA	NA	Available	Available	NA	NA	-	Available	-	NA	-	-	-	-	-	Available	NA	Available	NA	NA	Available	Available	NA	NA	NA	NA	NA
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiAlN / TiN / DLC	TiAlN	TiAlN / TiN	TiN	TiAlN	TiN	TiN	TiAlN	TiCN	Other	Other	Other	TiAlN	TS	TiCN	TiAlN	TS	TiN	TiAlN	TiN	Other	TiN	TiCN	Other	TiAlN	TiAlN	Other	TiAlN	Other	TiAlN	TiAlN	TiAlN	TiN	TS	TS	TS	TS	TS	-	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	0.4	-	-	0.5 ～ 15	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.25 ～ 2.5	-	-	-	-	0.1 ～ 5	-	-	-	-	-	-	-	-

Loading...