• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Spot Drill

  Nine9

  Insert for NC spot drill holder.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1–6 ～ 3 to 15	60 ～ 90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	Titanium[○]	Single blade	NA	Available	TiAlN / DLC	-

  From: ₹ 3,043.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Bit, A Type 60°

  IWATA TOOL

  [Features]
  · The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
  · Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 8	60	Centering (Positioning)	Titanium[○]	Double-edged	NA	NA	-	-

  From: ₹ 3,786.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables higher speed and longer service life compared to NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer	Titanium[◎]	Single blade	NA	Available	TiN	-

  From: ₹ 1,437.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (positive type) HSCT-P

  OSG

  End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,228.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Engraving Cutter

  Nine9

  The special insert design realizes an ultra-long operating life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.45～2.1 ～ 0.45～2.7	45 ～ 60	Centering (Positioning) / Engraved	Titanium[○]	Single blade	NA	Available	TiN	-

  From: ₹ 3,912.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING 2-Flute Inner Radius Cutter MIR200

  NS TOOL

  Supports NCs and MCs. R chamfering can be easily machined. Infinity coating used for significantly greater durability

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 12.1	-	Round Chamfer	Titanium[○]	-	-	Available	TiAlN	0.1 ～ 5

  From: ₹ 5,292.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Titanium[○]	Single blade	NA	Available	TiCN	-

  From: ₹ 4,961.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, HG Center Drill Bit, A Type 60°

  IWATA TOOL

  [Features]
  · High-grade center drill for mass production.
  · Thoroughly improves tact time and achieves a stable life.
  · Center drill improved for mass production.
  · Small diameter sizes, in particular, boast life several times longer than conventional center drills

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	0.3 ～ 1	60	Centering (Positioning)	Titanium[○]	Single blade	NA	NA	-	-

  From: ₹ 739.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating

  IWATA TOOL

  [Features]
  · The raking blades/flutes ensure a highly precise rounded form.
  · First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracy

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 5	-	Round Chamfer	Titanium[○]	Single blade	NA	Available	Other	0.5 ～ 3

  From: ₹ 9,083.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 120°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.4 ～ 16	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 1,293.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill VP-LDS

  OSG

  V coating enables longer service life compared to TIN-NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Titanium[◎]	Single blade	NA	Available	TiCN	-

  From: ₹ 1,839.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Centering (Positioning) / Hole Chamfer	Titanium[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 41,717.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coating FX-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Centering (Positioning) / Hole Chamfer	Titanium[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 35,371.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Corner Rounding Type FX-ECR

  OSG

  Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 1.5	-	Round Chamfer	Titanium[○]	Single blade	NA	Available	TiAlN	0.1 ～ 2

  From: ₹ 6,517.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (negative type) HSCT-N

  OSG

  End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,178.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N

  OSG

  Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,754.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

  OSG

  Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,754.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank

  OSG

  Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Titanium[○]	Single blade	Available	Available	TiCN	-

  From: ₹ 2,499.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  FAGCCRC, FA Coated Carbide Corner Rounding Cutter

  SANKO MFG

  [Features]
  · A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
  · Carbide FA coating improves machining efficiency, provides a long life, and enables high precision finished surface machining

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 14	-	Round Chamfer	Titanium[○]	-	NA	Available	TiAlN	0.5 ～ 5

  From: ₹ 8,110.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  FAGCCRCL, FA-Coating Long Shank Carbide Corner Rounding Cutter

  SANKO MFG

  [Features]
  · A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
  · The long shank allows for machining in deep sections.
  · FA GCCRC long shank end mill

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 14	-	Round Chamfer	Titanium[○]	-	NA	Available	TiAlN	0.5 ～ 5

  From: ₹ 13,639.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade	NA	NA	-	-

  From: ₹ 5,488.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide DLC Coating

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 16	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade	NA	Available	DLC	-

  From: ₹ 8,641.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide DLC Coating

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade	NA	Available	DLC	-

  From: ₹ 7,579.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade	NA	NA	-	-

  From: ₹ 5,455.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type DLC Coating

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade	NA	Available	DLC	-

  From: ₹ 8,641.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit A Type 60゜

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 3	60	Centering (Positioning)	Titanium[○]	Single blade	NA	NA	-	-

  From: ₹ 2,329.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 1	60	Centering (Positioning)	Titanium[○]	Single blade	NA	Available	Other	-

  From: ₹ 3,321.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit, A Type 90°

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 3	90	Centering (Positioning)	Titanium[○]	Single blade	NA	NA	-	-

  From: ₹ 4,557.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 60°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 6	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 2,006.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 90°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 6	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 2,006.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  SANDVIK

  High performance end mill with high versatility
  [Features]
  ·One end mill for all work materials
  ·Improved machine operating rate
  ·Minimize tool inventory
  ·Safe and predictable tool life
  ·High flexibility and optimized tooling

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	8 ～ 12	90°	Chamfering/Horizontal	Titanium[○]	Single blade	NA	Available	Other	-

  From: ₹ 9,752.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	6 ～ 20	-	Chamfering/Horizontal	Titanium[○]	Single blade	NA	NA	-	-

  From: ₹ 9,907.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

  7 LEADERS

  [Features]
  · 90° Carbide 2-Flute Chamfering V-Grooving End Mill
  · Use for V-grooving, horizontal chamfering, centering, hole chamfering.
  · Nanoparticle Multilayer Coating
  · Excellent lubricity and abrasion resistance.
  · Suitable for a wide range of work materials from general steel to aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Titanium[○]	-	-	Available	Other	-

  From: ₹ 3,151.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

  OSG

  [Features]
  · A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
  The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
  Significantly reduces turning-back, or burring.
  Excellent chip discharge.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	90°	Chamfering/Horizontal	Titanium[○]	Single blade	NA	Available	-	-

  From: ₹ 9,153.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

  OSG

  [Features]
  · A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
  The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
  Significantly reduces turning-back, or burring.
  Excellent chip discharge.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	-	Titanium[◎]	-	-	Available	Other	-

  From: ₹ 9,153.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P

  OSG

  [Features]
  · A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
  The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
  Significantly reduces turning-back, or burring.
  Excellent chip discharge.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	-	Titanium[◎]	-	-	Available	Other	-

  From: ₹ 9,634.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

  OSG

  [Features]
  · A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
  The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
  Significantly reduces turning-back, or burring.
  Excellent chip discharge.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	-	Titanium[○]	-	-	Available	Other	-

  From: ₹ 9,634.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN Coating C Chamfer Cutter NSCV-M

  NS TOOL

  [Features]
  · Enables easy C chamfering.
  · Uses MUGEN coating that dramatically improves the durability.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 6	45°	Chamfering/Horizontal	Titanium[○]	Single blade	Available	Available	TiAlN	-

  From: ₹ 7,198.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For New Tornado MT-CP/CC

  THE CUT

  [Features]
  Cutting speed (m/min): 60 to 150
  Feed speed (mm/t): 0.02 to 0.08
  Set screw: MST-4S, MST-2.5S, MST-3S, MST-2 (M5), MST-2L040 (M6)

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	Titanium[○]	-	-	-	-	-

  From: ₹ 1,802.86
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dedicated Insert For Double Face Cutter, MT-SDM/H

  THE CUT

  Dedicated insert MT-SDM/H for THE CUT replaceable insert double-face chamfer tool.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Hole Chamfer	Titanium[○]	-	-	NA	-	-

  From: ₹ 1,475.71
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For General Purpose Chamfering Cutter, MD-TD

  THE CUT

  [Features]
  · Carbide base material for a longer tool life. As 3 cutting edges can be used, it is also economical.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	Titanium[○]	-	-	-	-	-

  From: ₹ 2,294.29
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For Seat Surface Cutter, MT-DC

  THE CUT

  [Features]
  Cutting speed (m/min): 40 to 100
  Feed speed (mm/t): 0.04 to 0.1
  Wrench: MFT-8/MFT-15

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	Titanium[○]	-	-	-	-	-

  From: ₹ 5,351.43
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Chamfering Cutter Super Mentori-Maru MTMS 20/30

  THE CUT

  [Features]
  · Can be used like an end mill for machining materials from an un-machined state.
  · Capable of ramping machining (α = 3°).
  · Standard positive inserts of various manufacturers are mountable.
  · Capable of high speed machining because of the 3-flute/4-flute design.
  · Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
  · The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
  · The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
  · Change the insert material or machining conditions for use with different types of work material.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	Titanium[○]	-	-	-	-	-

  From: ₹ 26,600.76
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Chamfering Cutter Super Mentori-Maru MTMS 6.5/9

  THE CUT

  [Features]
  · Uses a positive lathe insert for a light cutting sharpness.
  · Standard positive inserts of various manufacturers are mountable.
  · Capable of high speed machining because of the 3-flute design.
  · Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).
  · The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
  · With the insert, the MTMS9 is capable of machining up to C7 and the MTMS6.5 up to C4.5. (depends on the insert cutting edge.)
  · Change the insert material or machining conditions for use with different types of work material.
  · Can be used like an end mill for machining materials from an un-machined state.·

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	Titanium[○]	-	-	-	-	-

  From: ₹ 20,952.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For Super Mentori-Maru ZERO

  THE CUT

  [Features]
  ·The unique shape allows high-precision machining.
  Set screw: MST-3S
  Wrench: MFT-9

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	Titanium[○]	-	-	-	-	-

  From: ₹ 3,854.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	Nine9	IWATA TOOL	OSG	OSG	Nine9	NS TOOL	OSG	IWATA TOOL	IWATA TOOL	IWATA TOOL	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SANKO MFG	SANKO MFG	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	SANDVIK	SANDVIK	7 LEADERS	OSG	OSG	OSG	OSG	NS TOOL	THE CUT	THE CUT	THE CUT	THE CUT	THE CUT	THE CUT	THE CUT
Product Series	Insert for Spot Drill	Carbide Center Drill Bit, A Type 60°	Leading Drill TIN-NC-LDS	3-flute Chamfering Cutter (positive type) HSCT-P	Insert for Engraving Cutter	MUGEN-COATING 2-Flute Inner Radius Cutter MIR200	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	HSS, HG Center Drill Bit, A Type 60°	Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating	Carbide SP Center 120°	Leading Drill VP-LDS	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS	Leading Drill, Carbide FX Coating FX-LDS	2-flute, Corner Rounding Type FX-ECR	3-flute Chamfering Cutter (negative type) HSCT-N	3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P	VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank	FAGCCRC, FA Coated Carbide Corner Rounding Cutter	FAGCCRCL, FA-Coating Long Shank Carbide Corner Rounding Cutter	Toglon Sharp SP 60° Carbide	Toglon Sharp SP 60° Carbide DLC Coating	Toglon Sharp SP 90° Carbide DLC Coating	Toglon Sharp SP 90° Carbide Long Type	Toglon Sharp SP 90° Carbide Long Type DLC Coating	Carbide HG Center Drill Bit A Type 60゜	Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating	Carbide HG Center Drill Bit, A Type 90°	Carbide SP Center 60°	Carbide SP Center 90°	CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank	CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000	Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X	WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N	WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P	WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P	WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N	MUGEN Coating C Chamfer Cutter NSCV-M	Insert For New Tornado MT-CP/CC	Dedicated Insert For Double Face Cutter, MT-SDM/H	Insert For General Purpose Chamfering Cutter, MD-TD	Insert For Seat Surface Cutter, MT-DC	Chamfering Cutter Super Mentori-Maru MTMS 20/30	Chamfering Cutter Super Mentori-Maru MTMS 6.5/9	Insert For Super Mentori-Maru ZERO
From	₹ 3,043.65	₹ 3,786.44	₹ 1,437.53	₹ 8,228.25	₹ 3,912.93	₹ 5,292.27	₹ 4,961.47	₹ 739.31	₹ 9,083.75	₹ 1,293.82	₹ 1,839.35	₹ 41,717.11	₹ 35,371.07	₹ 6,517.84	₹ 8,178.69	₹ 8,754.64	₹ 8,754.64	₹ 2,499.65	₹ 8,110.38	₹ 13,639.40	₹ 5,488.80	₹ 8,641.75	₹ 7,579.60	₹ 5,455.33	₹ 8,641.75	₹ 2,329.18	₹ 3,321.67	₹ 4,557.93	₹ 2,006.38	₹ 2,006.38	₹ 9,752.47	₹ 9,907.85	₹ 3,151.56	₹ 9,153.76	₹ 9,153.76	₹ 9,634.62	₹ 9,634.62	₹ 7,198.07	₹ 1,802.86	₹ 1,475.71	₹ 2,294.29	₹ 5,351.43	₹ 26,600.76	₹ 20,952.55	₹ 3,854.29
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more
Tool Material Type	Carbide	Carbide	High-speed steel	Carbide	Carbide	Carbide	Powder high-speed steel	Cobalt HSS	Carbide	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	Carbide	-	-	-	-	-
Tool Diameter (D)(mm)	1–6 ～ 3 to 15	1 ～ 8	3 ～ 25	1 ～ 2	0.45～2.1 ～ 0.45～2.7	0.8 ～ 12.1	-	0.3 ～ 1	3 ～ 5	0.4 ～ 16	3 ～ 25	16 ～ 25	16 ～ 25	0.5 ～ 1.5	1 ～ 2	1 ～ 2	1 ～ 2	3 ～ 25	4 ～ 14	4 ～ 14	1.2 ～ 16	2 ～ 16	1.2 ～ 16	3 ～ 12	3 ～ 12	0.2 ～ 3	0.2 ～ 1	0.2 ～ 3	0.03 ～ 6	0.03 ～ 6	8 ～ 12	6 ～ 20	0.5 ～ 20	-	-	-	-	4 ～ 6	-	-	-	-	-	-	-
Tip angle (θ)	60 ～ 90	60	60 ～ 120	90	45 ～ 60	-	-	60	-	120	90	90	90	-	90	90	90	90	-	-	60	60	90	90	90	60	60	90	60	90	90°	-	90	90°	-	-	-	45°	-	-	-	-	-	-	-
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	Centering (Positioning)	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Engraved	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning)	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer	Round Chamfer	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal	-	-	-	Chamfering/Horizontal	-	Hole Chamfer	-	-	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	-
work material	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]
Single blade, two blades	Single blade	Double-edged	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade / Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade / Double-edged	Single blade / Double-edged	Single blade	Single blade	-	Single blade	-	-	-	Single blade	-	-	-	-	-	-	-
Peripheral Blade Y/N	NA	NA	NA	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	-	NA	-	-	-	Available	-	-	-	-	-	-	-
Coating Y/N	Available	NA	Available	NA	Available	Available	Available	NA	Available	NA	Available	Available	Available	Available	NA	NA	NA	Available	Available	Available	NA	Available	Available	NA	Available	NA	Available	NA	NA	NA	Available	NA	Available	Available	Available	Available	Available	Available	-	NA	-	-	-	-	-
Coating Type	TiAlN / DLC	-	TiN	Non-Coated	TiN	TiAlN	TiCN	-	Other	-	TiCN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiCN	TiAlN	TiAlN	-	DLC	DLC	-	DLC	-	Other	-	-	-	Other	-	Other	-	Other	Other	Other	TiAlN	-	-	-	-	-	-	-
R Size (R)(mm)	-	-	-	-	-	0.1 ～ 5	-	-	0.5 ～ 3	-	-	-	-	0.1 ～ 2	-	-	-	-	0.5 ～ 5	0.5 ～ 5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...