Chamfering / Centering Tools（work material：Aluminum Page4）

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide DLC Coating

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 16	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	Available	DLC	-

  From: ₹ 8,641.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	NA	-	-

  From: ₹ 4,425.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide DLC Coating

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	Available	DLC	-

  From: ₹ 7,579.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	NA	-	-

  From: ₹ 5,455.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type DLC Coating

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	Available	DLC	-

  From: ₹ 8,641.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 1	60	Centering (Positioning)	Aluminum[○]	Single blade	NA	Available	Other	-

  From: ₹ 3,321.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 120°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.4 ～ 16	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 1,293.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 120°, ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.4 ～ 16	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 1,943.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 120°, Long Type, ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 4,282.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 60°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 6	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 2,006.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 60° ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 6	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 2,626.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 90°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 6	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 2,006.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 60°, Long Type, ALD Coating

  IWATA TOOL

  Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering.
  
  [Features]
  · The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
  · Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 4	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 4,800.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Bit, A Type High Helix 60°, ALD Coating

  IWATA TOOL

  [Features]
  · The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
  · Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 6	60	Centering (Positioning)	Aluminum[○]	Double-edged	NA	Available	Other	-

  From: ₹ 4,117.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Bit, A Type High Helix 90°, ALD Coating

  IWATA TOOL

  [Features]
  · The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
  · Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 8	90	Centering (Positioning)	Aluminum[○]	Double-edged	NA	Available	Other	-

  From: ₹ 5,661.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momimen Nano

  FUJIGEN

  [Features]
  · Smallest class in the industry. A screw-on type, the smallest class in the industry thanks to its industry-smallest class tip (underneck diameter of φ6 mm).
  · Interference of vise, clamp and the like can be avoided.
  · Capable of machining previously unreachable locations.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6 ～ 7.4	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,959.71
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini momi

  FUJIGEN

  [Features]
  · Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
  · The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	9	90	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,928.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Momimen

  FUJIGEN

  [Features]
  · Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
  · The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	13.5 ～ 16.15	90 ～ 118	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 11,779.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Decamomi

  FUJIGEN

  [Features]
  · Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
  · The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	22.5 ～ 26.6	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 18,123.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  60° Momimen

  FUJIGEN

  [Features]
  · A throw-away type requiring only a tip change (no tool correction required).
  · This tool allows C-chamfering and conical gouging, while reducing the number of tools used in ATC tool changes, and improving machining speed and productivity.
  · The shank diameter is φ16 and the cutting edge diameter is φ12, making it suitable for 60° chamfering in tight spaces.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	11.88	60	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 15,135.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Samurai

  FUJIGEN

  [Features]
  · Dedicated for aluminum. : The blade tip shape is specialized for aluminum machining and provides a clean cut with less burring, reducing the need for burr removal after machining.
  · Significantly reduces running cost thanks to its high strength and improved abrasion resistance.
  · Achieves high runout accuracy within 5/1,000 mm.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	4 ～ 10	90	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,677.09
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter

  FUJIGEN

  [Features]
  · Wide variety. Angle can be selected from 15° to 75° (5° increments) according to applications.
  · Tips are available in many types to support diverse workpieces.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	29.9 ～ 37.9	15 ～ 70	Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 29,308.58
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Young Men

  FUJIGEN

  [Features]
  · C15 chamfering. An excellent finish without chattering after one round of chamfering.
  · Chamfering performance next only to that of "Gentlemen" at a price equivalent to "Chamfering Cutter".

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	58.2 ～ 62.2	30 ～ 60	Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 30,294.38
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Gentlemen

  FUJIGEN

  [Features]
  · The longest blade length. It is also possible to machine difficult-to-cut materials with a unique breaker with a tip blade length of 30 mm.
  · Available in 13 angles from 15° to 75°.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	50.7 ～ 73.3	15 ～ 75	Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 54,347.22
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kame Cutter

  FUJIGEN

  [Features]
  · Reduction of work time. : The special tip shape enables high-feed processing

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	34.9	45	Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 32,362.40
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ryanmencut / V

  FUJIGEN

  [Features]
  · Simultaneous chamfering. : Can be used for front and back chamfering, as well as side V-grooving

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	19.5 ～ 45.6	45	Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 18,533.16
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Uratorimen-C

  FUJIGEN

  This tool is specialized for back chamfering in drilling and edge chamfering.
  The insert with chip breaker provides excellent sharpness.
  Since the insert is replaceable, there is no need to re-grind it.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6.2 ～ 14	45	Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 17,509.87
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi Angle Mill

  FUJIGEN

  [Features]
  · Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.
  · 0° to 90° at 5° pitch for easy, reliable angle adjustment

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	0–90	Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 43,800.84
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Baitender

  FUJIGEN

  [Features]
  · Turning tool type. Telescopic turning tool enables a wide range of chamfering.
  · Hole chamfering capacity: φ28 mm - φ134 mm.
  · Uses the T32 type tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	49.85～134.6	45	Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 24,375.60
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Baitender dedicated arm

  FUJIGEN

  It is a dedicated accessory for the Baitender.
  A wide area of chamfering is possible with the telescopic tool bit.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16	45	Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,200.27
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Cutting Bit

  FUJIGEN

  [Features]
  · Easy rounding change: Various round chamfering is possible by exchanging the tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	0.5 to 4

  From: ₹ 30,463.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special Jr.

  FUJIGEN

  Single flute replaceable insert for round chamfering of R0.5 to R5 and also for small diameter round chamfering.
  Using Fujigen's unique negative/positive method, it is possible to cut R5 in a single process.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	25	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: ₹ 13,450.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special

  FUJIGEN

  Replaceable insert for round chamfering of R0.5 to R5.
  Carbide insert that can be used on 4 sides with 1 insert.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	56	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: ₹ 37,654.35
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R-Nouveau Jr.

  FUJIGEN

  Single flute replaceable insert for round chamfering of R5 to R10.
  Fujigen's original negative/positive method is used, so it is possible to cut R10 in a single process even with compact machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	35.4	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	5–10

  From: ₹ 15,119.05
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R-Nouveau

  FUJIGEN

  Various round chamfering is possible by exchanging the tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	69.2	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	5–10

  From: ₹ 40,157.67
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RC Hand Cutter

  FUJIGEN

  Round chamfering and C chamfering of R1, R2, and R3 are possible by exchanging the insert.
  The unique insert replacement method makes insert replacement fast and accurate.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	25	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	1–3

  From: ₹ 13,450.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ryanmencut R

  FUJIGEN

  [Features]
  · Front and back round and corner chamfering possible. Back and front C chamfering is also possible by exchanging the tip.
  · Mini R is for front only.
  · Uses a tip that allows 8 corners to be used.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	30 ～ 48	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	0.5~5 ～ 1–5

  From: ₹ 25,893.13
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini R

  FUJIGEN

  8 corners of an insert can be used.
  Round chamfering and C chamfering are possible by exchanging the insert.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	1–5

  From: ₹ 13,450.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Momimen nano ENGX040102

  FUJIGEN

  Insert for Momimen nano.
  [Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	-	-	Available	AlCrN	-

  From: ₹ 2,098.80
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tips for Chibimomi C22GUX

  FUJIGEN

  An indexable insert for Chibimomi that can be used for center spotting and chamfering.
  [Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	-	-	NA	Non-Coated	-

  From: ₹ 1,576.44
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Tip for Momimen / All C32GUX

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	-	-	Available / NA	TiAlN / TiN / Non-Coated	-

  From: ₹ 1,765.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Tips for Decamomi T32GUX

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	-	-	NA	Non-Coated	-

  From: ₹ 1,966.20
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for 60° Momimen D43GUX

  FUJIGEN

  An indexable insert for 60° Momimen that can be used for center spotting and chamfering.
  [Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	-	-	NA	Non-Coated	-

  From: ₹ 2,562.24
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal / Round Chamfer	Aluminum[○]	-	-	Available / NA	TiAlN / TiN / Non-Coated / AlCrN	-

  From: ₹ 1,494.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Young Men TNEX270412

  FUJIGEN

  A dedicated indexable insert for a chamfer cutter Young Men that can perform chamfering.
  [Applications]Used for chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal	Aluminum[○]	-	-	NA	Non-Coated	-

  From: ₹ 2,902.44
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN
Product Series	Toglon Sharp SP 60° Carbide DLC Coating	Toglon Sharp SP 90° Carbide	Toglon Sharp SP 90° Carbide DLC Coating	Toglon Sharp SP 90° Carbide Long Type	Toglon Sharp SP 90° Carbide Long Type DLC Coating	Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating	Carbide SP Center 120°	Carbide SP Center, 120°, ALD Coating	Carbide SP Center, 120°, Long Type, ALD Coating	Carbide SP Center 60°	Carbide SP Center 60° ALD Coating	Carbide SP Center 90°	Carbide SP Center, 60°, Long Type, ALD Coating	Carbide Center Drill Bit, A Type High Helix 60°, ALD Coating	Carbide Center Drill Bit, A Type High Helix 90°, ALD Coating	Momimen Nano	Mini momi	Momimen	Decamomi	60° Momimen	Aluminum Samurai	Chamfering cutter	Young Men	Gentlemen	Kame Cutter	Ryanmencut / V	Uratorimen-C	Multi Angle Mill	Baitender	Baitender dedicated arm	R Cutting Bit	R Special Jr.	R Special	R-Nouveau Jr.	R-Nouveau	RC Hand Cutter	Ryanmencut R	Mini R	Tip for Momimen nano ENGX040102	Tips for Chibimomi C22GUX	Tip for Momimen / All C32GUX	Tips for Decamomi T32GUX	Tip for 60° Momimen D43GUX	Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR	Tip for Young Men TNEX270412
CAD
From	₹ 8,641.75	₹ 4,425.33	₹ 7,579.60	₹ 5,455.33	₹ 8,641.75	₹ 3,321.67	₹ 1,293.82	₹ 1,943.44	₹ 4,282.02	₹ 2,006.38	₹ 2,626.53	₹ 2,006.38	₹ 4,800.36	₹ 4,117.27	₹ 5,661.58	₹ 9,959.71	₹ 9,928.89	₹ 11,779.95	₹ 18,123.31	₹ 15,135.13	₹ 9,677.09	₹ 29,308.58	₹ 30,294.38	₹ 54,347.22	₹ 32,362.40	₹ 18,533.16	₹ 17,509.87	₹ 43,800.84	₹ 24,375.60	₹ 9,200.27	₹ 30,463.15	₹ 13,450.16	₹ 37,654.35	₹ 15,119.05	₹ 40,157.67	₹ 13,450.16	₹ 25,893.13	₹ 13,450.16	₹ 2,098.80	₹ 1,576.44	₹ 1,765.29	₹ 1,966.20	₹ 2,562.24	₹ 1,494.73	₹ 2,902.44
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	8 Day(s) or more
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool Diameter (D)(mm)	2 ～ 16	1.2 ～ 16	1.2 ～ 16	3 ～ 12	3 ～ 12	0.2 ～ 1	0.4 ～ 16	0.4 ～ 16	2 ～ 12	0.03 ～ 6	0.1 ～ 6	0.03 ～ 6	0.5 ～ 4	1 ～ 6	1 ～ 8	6 ～ 7.4	9	13.5 ～ 16.15	22.5 ～ 26.6	11.88	4 ～ 10	29.9 ～ 37.9	58.2 ～ 62.2	50.7 ～ 73.3	34.9	19.5 ～ 45.6	6.2 ～ 14	-	49.85～134.6	16	-	25	56	35.4	69.2	25	30 ～ 48	16	-	-	-	-	-	-	-
Tip angle (θ)	60	90	90	90	90	60	120	120	120	60	60	90	60	60	90	90 ～ 120	90	90 ～ 118	90 ～ 120	60	90	15 ～ 70	30 ～ 60	15 ～ 75	45	45	45	0–90	45	45	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning)	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Chamfering/Horizontal	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal / Round Chamfer	Chamfering/Horizontal
work material	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Double-edged	Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	-	-	-	-
Peripheral Blade Y/N	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	-	-	-	-	-	-	-
Coating Y/N	Available	NA	Available	NA	Available	Available	NA	Available	Available	NA	Available	NA	Available	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	Available / NA	NA	NA	Available / NA	NA
Coating Type	DLC	-	DLC	-	DLC	Other	-	Other	Other	-	Other	-	Other	Other	Other	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	AlCrN	Non-Coated	TiAlN / TiN / Non-Coated	Non-Coated	Non-Coated	TiAlN / TiN / Non-Coated / AlCrN	Non-Coated
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 to 4	0.5~5	0.5~5	5–10	5–10	1–3	0.5~5 ～ 1–5	1–5	-	-	-	-	-	-	-

Loading...