Chamfering / Centering Tools（work material：Cast Iron Page6）

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

  OSG

  [Features]
  · A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
  The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
  Significantly reduces turning-back, or burring.
  Excellent chip discharge.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	-	Cast Iron[○]	-	-	Available	Other	-

  From: ₹ 9,634.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]
  ·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining
  ·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few
  ·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good
  ·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time
  ・ Standard type

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	NA	-	-

  From: ₹ 8,389.02
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: ₹ 8,389.02
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: ₹ 8,389.02
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,203.09
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,203.09
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: ₹ 9,909.71
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: ₹ 9,909.71
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,904.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,904.04
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide V Cut End Mill Long Type Coated Series AMVL 120°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,904.04
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	NA	-	-

  From: ₹ 9,086.51
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: ₹ 9,086.51
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: ₹ 9,086.51
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 10,492.87
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 10,492.87
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 10,492.87
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Standard Type, TiN Coat, 90°

  MAKOTOLOY

  [Features]
  · Higher positioning precision than normal twist drills thanks to the small chisel edge.
  · Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
  · The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: ₹ 9,906.58
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Standard Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]
  · Higher positioning precision than normal twist drills thanks to the small chisel edge.
  · Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: ₹ 9,906.58
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Long Type, TiN Coat, 90°

  MAKOTOLOY

  [Features]
  · Higher positioning precision than normal twist drills thanks to the small chisel edge.
  · Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
  · The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: ₹ 12,841.62
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Long Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]
  · Higher positioning precision than normal twist drills thanks to the small chisel edge.
  · Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: ₹ 12,841.62
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Corner Rounding Cutter, Carbide C-CRC-V

  THE CUT

  [Features]
  · Ideal for CNC machining.
  · Capable of machining extremely thin workpieces.
  · Simple regrinding/repolishing.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2.5	-	Round Chamfer	Cast Iron[○]	Single blade	-	Available	TiAlN	0.25 ～ 2.5

  From: ₹ 6,158.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Set Drill, Carbide C-NC-PSD

  THE CUT

  [Features]
  · Allows for machining at higher speeds and a significantly longer tool life than with a high speed steel (TiAlN) point set drill.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Hole Chamfer	Cast Iron[○]	Single blade	-	NA	-	-

  From: ₹ 3,256.47
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G

  THE CUT

  [Features]
  · The tool life is drastically improved through the use of 3 flutes and a TiN coating.
  · No chatter.
  · Capable of true circular machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 31	90	Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: ₹ 3,386.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For New Tornado MT-CP/CC

  THE CUT

  [Features]
  Cutting speed (m/min): 60 to 150
  Feed speed (mm/t): 0.02 to 0.08
  Set screw: MST-4S, MST-2.5S, MST-3S, MST-2 (M5), MST-2L040 (M6)

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	Cast Iron[○]	-	-	-	-	-

  From: ₹ 1,802.86
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dedicated Insert For Double Face Cutter, MT-SDM/H

  THE CUT

  Dedicated insert MT-SDM/H for THE CUT replaceable insert double-face chamfer tool.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Hole Chamfer	Cast Iron[○]	-	-	Available	TiAlN	-

  From: ₹ 8,501.43
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For General Purpose Chamfering Cutter, MD-TD

  THE CUT

  [Features]
  · Carbide base material for a longer tool life. As 3 cutting edges can be used, it is also economical.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	Cast Iron[○]	-	-	-	-	-

  From: ₹ 2,294.29
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Chamfering Cutter Super Mentori-Maru MTMS 20/30

  THE CUT

  [Features]
  · Can be used like an end mill for machining materials from an un-machined state.
  · Capable of ramping machining (α = 3°).
  · Standard positive inserts of various manufacturers are mountable.
  · Capable of high speed machining because of the 3-flute/4-flute design.
  · Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
  · The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
  · The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
  · Change the insert material or machining conditions for use with different types of work material.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	Cast Iron[○]	-	-	-	-	-

  From: ₹ 26,600.76
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	THE CUT	THE CUT	THE CUT	THE CUT	THE CUT	THE CUT	THE CUT
Product Series	WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°	Carbide V Cut End Mill Long Type Coated Series AMVL 120°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°	V Spot Carbide Drill, Standard Type, TiN Coat, 90°	V Spot Carbide Drill, Standard Type, TiN Coat, 120°	V Spot Carbide Drill, Long Type, TiN Coat, 90°	V Spot Carbide Drill, Long Type, TiN Coat, 120°	Mini Corner Rounding Cutter, Carbide C-CRC-V	Point Set Drill, Carbide C-NC-PSD	Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G	Insert For New Tornado MT-CP/CC	Dedicated Insert For Double Face Cutter, MT-SDM/H	Insert For General Purpose Chamfering Cutter, MD-TD	Chamfering Cutter Super Mentori-Maru MTMS 20/30
CAD
From	₹ 9,634.62	₹ 8,389.02	₹ 8,389.02	₹ 8,389.02	₹ 11,203.09	₹ 11,203.09	₹ 9,909.71	₹ 9,909.71	₹ 11,904.04	₹ 11,904.04	₹ 11,904.04	₹ 9,086.51	₹ 9,086.51	₹ 9,086.51	₹ 10,492.87	₹ 10,492.87	₹ 10,492.87	₹ 9,906.58	₹ 9,906.58	₹ 12,841.62	₹ 12,841.62	₹ 6,158.93	₹ 3,256.47	₹ 3,386.38	₹ 1,802.86	₹ 8,501.43	₹ 2,294.29	₹ 26,600.76
Days to Ship	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	High-speed steel	-	Carbide	-	-
Tool Diameter (D)(mm)	-	1 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 2.5	3 ～ 10	6.3 ～ 31	-	-	-	-
Tip angle (θ)	-	60	90	120	60	120	90	120	60	90	120	60	90	120	60	90	120	90	120	90	120	-	90	90	-	-	-	-
Application	-	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Round Chamfer	Hole Chamfer	Hole Chamfer	-	Hole Chamfer	-	Hole Chamfer / Chamfering/Horizontal / V Groove / Other
work material	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]
Single blade, two blades	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	-
Peripheral Blade Y/N	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coating Y/N	Available	NA	NA	NA	Available	Available	NA	NA	Available	Available	Available	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available	Available	NA	Available	-	Available	-	-
Coating Type	Other	-	-	-	TiAlN	TiAlN	-	-	TiAlN	TiAlN	TiAlN	-	-	-	TiAlN	TiAlN	TiAlN	TiN	TiN	TiN	TiN	TiAlN	-	TiN	-	TiAlN	-	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.25 ～ 2.5	-	-	-	-	-	-

Loading...