Taps for Pipes（Screw size (Nominal)：R3/4）

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes Spiral Tap SFT-TPT

  OSG

  Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	14	High-speed steel	Tap for pipes	For blind hole	2.5P	Non-Coated	NA	85

  From: ₹ 14,445.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	14	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	150

  From: ₹ 23,542.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated_TIN-TPT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	14	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	85

  From: ₹ 18,502.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	14	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	85

  From: ₹ 19,313.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	14	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	85

  From: ₹ 17,703.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT

  OSG

  This is a short thread type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	14	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	85

  From: ₹ 15,663.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Taper Pipe Thread Tap (Short Thread)_SFT-S-TPT

  OSG

  Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	14	High-speed steel	Tap for pipes	For blind hole	2.5P	Non-Coated	NA	85

  From: ₹ 16,069.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]	14	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	85

  From: ₹ 23,542.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT

  OSG

  Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Quenched and tempered steel (45 to 55 HRC)[◎]	14	Powder high-speed steel	Tap for pipes	For through hole / For blind hole	3P	TiCN	Available	96

  From: ₹ 21,689.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank・with Interrupted Threads_EX-LT-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	14	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	150

  From: ₹ 23,542.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Taper Pipe Thread Tap for Stainless Steels (Short Thread)_SUS-SFT-S-TPT

  OSG

  This is a short thread type used for machining female tapered pipe threads. It is suitable for blind holes with difficult-to-cut materials such as stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Stainless steel (SUS)[◎]	14	Vanadium High-Speed Steel	Tap for pipes	For blind hole	2.5P	Non-Coated	NA	85

  From: ₹ 19,718.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]	14	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	85

  From: ₹ 24,817.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap V coated for Aluminum Alloy_V-AL-TPT

  OSG

  Ideal for machining tapered female screws in aluminum alloy pipe, where the internal threading has a tendency to gouge

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	14	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiCN	Available	85

  From: ₹ 15,663.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Tap for Pipes, For Stainless Steel Use EX-SUS-TPT

  OSG

  It can be used to machine female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	14	-	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	85

  From: ₹ 14,736.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	14	Powder high-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	85

  From: ₹ 16,705.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	14	Powder high-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	85

  From: ₹ 17,748.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	14	Powder high-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	150

  From: ₹ 24,296.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes Interlap Type (PT) EX-IRT-PT

  OSG

  [Specifications]
  · Shape: Pipe tap
  · Screw type: pipe taper
  · Coating: Non-Coated
  · Work Material: Low-Carbon Steel (less than 0.25% carbon alloy) [○] / Stainless Steel (SUS) [◎] / Cast Steel (SC) [○]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R3/4	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○]	14	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	85

  From: ₹ 14,562.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Taper Tap for Pipes Spiral Tap SFT-TPT	Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT	Taper Pipe Thread Tap TiN coated_TIN-TPT	Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT	Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT	Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT	Spiral Taper Pipe Thread Tap (Short Thread)_SFT-S-TPT	Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT	Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT	Long Shank・with Interrupted Threads_EX-LT-IRT	Spiral Taper Pipe Thread Tap for Stainless Steels (Short Thread)_SUS-SFT-S-TPT	Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT	Taper Pipe Thread Tap V coated for Aluminum Alloy_V-AL-TPT	Tapered Tap for Pipes, For Stainless Steel Use EX-SUS-TPT	Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT	Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT	CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT	Taper Tap for Pipes Interlap Type (PT) EX-IRT-PT
From	₹ 14,445.71	₹ 23,542.87	₹ 18,502.75	₹ 19,313.07	₹ 17,703.65	₹ 15,663.22	₹ 16,069.05	₹ 23,542.87	₹ 21,689.16	₹ 23,542.87	₹ 19,718.91	₹ 24,817.98	₹ 15,663.22	₹ 14,736.36	₹ 16,705.27	₹ 17,748.65	₹ 24,296.96	₹ 14,562.24
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Screw size (Nominal)	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4	R3/4
Screw Types	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]	Quenched and tempered steel (45 to 55 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	Stainless steel (SUS)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○]
Pitch (P), Number of Threading(mm)	14	14	14	14	14	14	14	14	14	14	14	14	14	14	14	14	14	14
Tool Material Type	High-speed steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	High-speed steel	Carbide	Powder high-speed steel	Carbide	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	-	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel
Tap Type	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes
Hole type	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole
Chamfer threads (Lcf)	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	3P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P
Coating Type	Non-Coated	Non-Coated	TiN	TiN	Non-Coated	Non-Coated	Non-Coated	TiN	TiCN	Non-Coated	Non-Coated	TiN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Coating Y/N	NA	NA	Available	Available	NA	NA	NA	Available	Available	NA	NA	Available	Available	NA	NA	NA	NA	NA
Overall Length (L)(mm)	85	150	85	85	85	85	85	85	96	150	85	85	85	85	85	85	150	85

Loading...