Carbide Radius End Mills（Page4）

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2T SA Coated Carbide Radius 2-Flute

  SANKO MFG

  [Features]
  · Ideal for corner rounding or cutting curved surfaces.
  · Can also be used to prevent chipped corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 5	10 ～ 45	2	50 ～ 115	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: ₹ 5,803.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2 End Mill with Corner R, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  The adoption of a long shank allows for corner rounding in deep sections.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Groove	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 4,911.91
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2A End Mill with Corner R, 2-Flute, OK Coated

  OKAZAKI SEIKO

  The adoption of a long shank allows for corner rounding in deep sections.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	6 ～ 12	-	Plane / Groove	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,369.16
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

  OKAZAKI SEIKO

  A multi-function type end mill that is capable of groove milling and side milling as well as profiling.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.5 ～ 2	8 ～ 24	4	70 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	6 ～ 12	15 ～ 42	Plane / Side / Groove	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 6,369.16
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Multi-function type radius end mill capable of high speed machining of high hardness materials up to 65 HRC due to the effects of OK hard coating.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.5 ～ 2	8 ～ 24	4	70 ～ 110	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	6 ～ 12	15 ～ 42	Plane / Side / Groove	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 6,369.16
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 22	0.4 ～ 5	9 ～ 33	3	80 ～ 200	Aluminum[◎] / Copper[○]	5.8 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: ₹ 6,630.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.4 ～ 5	17 ～ 45	2	55 ～ 115	Aluminum[◎] / Copper[○]	6 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: ₹ 5,935.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 4	9 ～ 33	3	60 ～ 120	Aluminum[◎] / Copper[○]	6 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: ₹ 7,325.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 22	0.5 ～ 5	9 ～ 33	2	80 ～ 200	Aluminum[◎] / Copper[○]	5.8 ～ 20	-	Side	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: ₹ 6,871.44
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 10	0.5	21 ～ 34	4	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	6 ～ 10	-	Side	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 9,238.15
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 1	8 ～ 38	4	60 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	6 ～ 20	-	Side / Groove	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 6,689.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSRLN

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 16	1 ～ 3	6 ～ 24	3	80 ～ 185	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	4 ～ 16	20 ～ 120	Side / Curved surface	-	Long-Neck Radius	Powerful Torsion (45°-60°)	0.015～-0.015

  From: ₹ 12,649.58
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSR

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.5 ～ 3	4 ～ 40	3	70 ～ 185	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	6 ～ 20	6 ～ 15	Side / Curved surface	-	radius	Powerful Torsion (45°-60°)	0.015～-0.015

  From: ₹ 14,806.02
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type

  DIJET

  [Features]
  · Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	8 ～ 38	4	60 ～ 125	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	6 ～ 20	10 ～ 15	Side / Curved surface	-	radius	Powerful Torsion (45°-60°)	0.02～-0.02

  From: ₹ 11,162.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367

  GUHRING

  [Features]
  · Carbide endmill dedicated for aluminum.
  · With oil holes for internal lubrication.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	1 ～ 2.5	-	3	57 ～ 104	Aluminum[◎] / Copper[◎]	6 ～ 20	21 ～ 44	-	Non-Coated	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 5,120.47
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill, Regular, 2-Flute Corner R 3561

  GUHRING

  [Features]
  · Ideal for corner rounding of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	-	-	2	57 ～ 104	-	6 ～ 20	-	-	-	radius	Standard torsion (30-40°)	-

  From: ₹ 79,999.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill, Regular, Strong Torsion Multi-Blade Corner (6/8-Flute) Corner R 3563

  GUHRING

  [Features]
  · Ideal for corner rounding of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	-	-	6 ～ 8	57 ～ 104	-	6 ～ 20	-	-	-	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 79,999.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722

  GUHRING

  [Features]
  · Diamond coated endmill suitable for graphite or plastic.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	-	10 ～ 22	2	57 ～ 83	-	6 ～ 12	21 ～ 38	-	Dia Coat	radius	Standard torsion (30-40°)	-

  From: ₹ 22,748.24
  Days to Ship: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

  GUHRING

  [Features]
  · Capable of machining hardened materials of hardness exceeding 60 HRC.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	0.5 ～ 2	-	4	57 ～ 92	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	6 ～ 16	21 ～ 44	-	Other	radius	Standard torsion (30-40°)	-

  From: ₹ 5,833.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363

  GUHRING

  [Features]
  · Capable of machining hardened materials of hardness exceeding 60 HRC.
  · Features short flutes and rounded corners with high rigidity, enabling high precision machining in deep areas.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 16	0.5 ～ 1	-	6	75 ～ 150	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Titanium[◎]	6 ～ 16	39 ～ 105	-	Other	Long-Neck Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 5,833.04
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362

  GUHRING

  [Features]
  · Capable of machining hardened materials of hardness exceeding 60 HRC.
  · Suitable for machining in deep locations.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 16	1 ～ 2	-	4	75 ～ 150	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	6 ～ 16	39 ～ 105	-	Other	Long-Neck Radius	Standard torsion (30-40°)	-

  From: ₹ 11,457.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Carbide Solid End Mill Radius

  SANDVIK

  Unique shape exhibits high performance

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: ₹ 10,625.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBRE-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  It is possible to increase the depth of cut.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 6	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 16,655.33
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBREF-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  It is possible to increase the depth of cut.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 3	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 15,952.15
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBRE-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  High-efficiency machining is possible with high feed.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	-	1.5 ～ 2	3	50 ～ 70	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: ₹ 28,687.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBREF-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  High-efficiency machining is possible with high feed.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 2	-	0.5 ～ 1.5	3	50	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: ₹ 18,766.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 3	-	1.5 ～ 10	2	60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	3	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,664.80
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC

  KYOWA SEIKO

  [Specifications]
  · Shape: Radius End Mill (carbide)
  · Material: Super Micro Grain Alloy
  · Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎]
  [Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  8 ～ 16	-	12 ～ 24	3	100 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	6 ～ 14	-	Plane / Side / Curved surface / Groove / Inclined Cuts	DLC	-	Powerful Torsion (45°-60°)	-

  From: ₹ 10,605.29
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

  KYOWA SEIKO

  [Specifications]
  · Shape: Radius End Mill (carbide)
  · Material: Super Micro Grain Alloy
  · Work Materials: Aluminum [◎], Copper [◎]
  [Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	-	6 ～ 32	3	60 ～ 100	Aluminum[◎] / Copper[◎]	6 ～ 16	-	Plane / Side / Curved surface / Groove / Inclined Cuts	DLC	-	Powerful Torsion (45°-60°)	-

  From: ₹ 7,017.05
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 4 Carbide Flutes and Corner Radius KSRA-4

  KYOWA SEIKO

  [Features]
  A carbide end mill suitable for general steel, stainless steel, and other workpieces, 2 flutes, with corner R.
  It is resistant to breakage and chipping.
  The high cutting speed and high production efficiency lead to overall production cost reduction.
  [Applications]
  Suitable for slab milling, side milling, curved surface milling, grooving, and ramping.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 3	-	3 ～ 10	4	60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	3	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 8,593.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steam Carbide Radius End Mill CT-STE4R (Z10)

  TAIYO-TOOL

  [Features]
  · The first two types available in the STREAM Series are "Carbide Square End Mill (Model Number: CT-STE4)" and "Carbide Radius End Mill (Model Number: CT-STE4R)", both adopting a unique anti-vibration blade (wave-type blade) that reduces chattering when cutting hard-to-cut materials or titanium. Coating with excellent heat and oxidation resistance.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	1 ～ 4	15 ～ 50	4	70 ～ 130	-	6 ～ 25	-	-	Non-Coated	radius	Standard torsion (30-40°)	0～-0.05

  From: ₹ 12,852.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coat, Carbide long neck radius end mill, 4 flutes

  VAN HOORN

  [Features]
  · Micro end mill ideal for machining deep ribs in materials up to HRC 55.
  · 4-flute blade with a small blade diameter of 0.2 mm up is achieved. Compared to 2-flute type, this model has higher rigidity, longer tool service life, and achieves more efficient machining.
  · European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.4 ～ 2	0.05 ～ 0.2	0.6 ～ 3	4	64	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○]	6	2 ～ 8	-	TiAlN	Long-Neck Radius	-	-

  From: ₹ 3,478.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura HD, Carbide Solid Radius End Mill (With square center-cut oil hole)

  SANDVIK

  [Features]
  · Internal lubrication gives good chip discharge properties.
  · Twice the cutting depth that was conventionally possible
  · Ideal for everything from shoulder cutting to full grooving.
  · With reinforced edge lines, assures long product life even with intense machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  -	0.5 ～ 6.35	-	4	57 ～ 104	Quenched and tempered steel[○] / Stainless Steel[○]	6 ～ 20	-	-	-	radius	Standard torsion (30-40°)	-

  From: ₹ 12,054.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura HD, End Mill, Roughing and Finish Milling, Without Center Cut, 2F342-PC-1730

  SANDVIK

  [Features]
  · Twice the cutting depth that was conventionally possible
  · Ideal for everything from shoulder cutting to full grooving.
  · With reinforced edge lines, assures long product life even with intense machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  -	0.5 ～ 2	-	5	57 ～ 104	general steel[○] / Cast Iron[○]	6 ～ 20	-	-	-	radius	Standard torsion (30-40°)	-

  From: ₹ 11,011.51
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2Flutes Long Neck Radius

  OSG

  [Features]
  · Supports complex pocket machining involving groove and side cutting, as well as machining prone to chattering. Safety and high efficacy are achieved with high-difficulty titanium alloy processing.
  [Applications]
  · Work materials: Titanium alloy.
  [Specifications]
  · Torsion angle: 40.5°/43.5°
  [Material]
  · Cemented Carbide

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12 ～ 25	R0 ～ R6	24 ～ 50	4	90 ～ 140	-	12 ～ 25	36 ～ 75	-	-	radius	-	-

  From: ₹ 14,409.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Titanium Alloy Processed for High Feed Radius End Mills (Multiple Flutes)

  OSG

  [Features]
  · It is an end mill for high-efficiency bottom finishing processing. Significantly reduces machining time and achieves high finishing precision.
  [Applications]
  · Work materials: Titanium alloy.
  [Material]
  · Cemented Carbide
  · Non-coating

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  16 ～ 25	-	5	6 ～ 8	120	-	16 ～ 25	-	-	-	radius	-	-

  From: ₹ 33,861.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Uneven Lead End Mill (5 Flutes) For Machining FX Coated Titanium Alloy

  OSG

  [Features]
  · Supports complex pocket machining involving groove and side cutting, as well as machining prone to chattering. Safety and high efficacy are achieved with high-difficulty titanium alloy processing.
  [Applications]
  · Work materials: Titanium alloy.
  [Specifications]
  · Torsion angle 41°/42°/43°
  [Material]
  · Cemented Carbide

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12 ～ 25	R0 ～ R6	24 ～ 50	5	90 ～ 140	-	12 ～ 25	36 ～ 75	-	-	radius	-	-

  From: ₹ 16,478.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Uneven Lead End Mill (5 Flutes, Long Type) For Machining FX Coated Titanium Alloy

  OSG

  [Features]
  · Supports complex pocket machining involving groove and side cutting, as well as machining prone to chattering. Safety and high efficacy are achieved with high-difficulty titanium alloy processing.
  [Applications]
  · Work materials: Titanium alloy.
  [Specifications]
  · Torsion angle: 41°/42°/43°
  [Material]
  · Cemented Carbide

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12 ～ 25	R0 ～ R6	48 ～ 100	5	110 ～ 190	-	12 ～ 25	60 ～ 125	-	-	radius	-	-

  From: ₹ 21,307.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Union Tool Carbide End Mill

  UNION TOOL

  [Features]
  · Long-neck radius ball-end mill that can cut cemented carbide.
  · Diamond coating for cemented carbide machining has been developed to achieve outstanding hardness, toughness and adhesive strength.
  · Phenomenal "deep" cutting has been achieved through adoption of a blade shape optimized for cemented carbide.
  · Achieves tear-free, excellent machined surfaces, especially from medium rough to finish machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  -	-	0.15 ～ 1	2	50	-	4	-	-	-	Long-Neck Radius	No torsion	-

  From: ₹ 18,445.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872

  GUHRING

  [Features]
  · A versatile unequal lead type which supports a wide range of materials from raw materials to hardened materials.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.5 ～ 3	13 ～ 45	4	57 ～ 121	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○]	6 ～ 25	21 ～ 65	-	Other	radius	Standard torsion (30-40°)	-

  From: ₹ 54,849.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL VL Long Shank Radius 1.5D GSXVLLS4-R-1.5D

  NACHI(FUJIKOSHI)

  [Features]
  · Minimizes chattering during machining on vertical walls or deep engraving, allowing highly efficient high-quality machining to be performed.
  · For steel.
  

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	4.5 ～ 30	4	60 ～ 160	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Cast Iron[○]	6 ～ 20	15 ～ 100	-	For General Steels (AlCrN, etc.)	radius	Other	-

  From: ₹ 8,047.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL VL Multi-blade Radius 2.5D GSXVL6-R-2.5D

  NACHI(FUJIKOSHI)

  [Features]
  · Unequal division and unequal lead enable high-speed and high-grade processing.
  · For steel.
  

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.3 ～ 3	15 ～ 50	6	50 ～ 100	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Cast Iron[○]	6 ～ 20	-	-	For General Steels (AlCrN, etc.)	radius	Other	-

  From: ₹ 9,549.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX, Multi-Flute, Radius, 2.5D, for Ti/SUS, GSXVL6T-R-2.5D

  NACHI(FUJIKOSHI)

  [Features]·High-speed and high-quality machining is possible with the use of unequal spacing and unequal leads. ·For SUS and heat resistant alloys.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.3 ～ 3	15 ～ 50	6	50 ～ 100	Stainless Steel[○] / Titanium[○]	6 ～ 20	-	-	For General Steels (AlCrN, etc.)	radius	Other	-

  From: ₹ 9,549.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated General Purpose Router with Corner Radius

  OSG

  It is a product sold by designated agencies.
  
  [Features]
  · Can be used for a wide variety of machining such as for various composite materials that include electrolyte membranes, metal matrices, and ceramic bases as well as machinable ceramics.
  · Base blade has rounded corners.
  · Various rounding sizes are available. Select according to the application.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	-	12 ～ 36	4	62 ～ 86	-	4 ～ 12	-	-	-	radius	-	-

  From: ₹ 23,659.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating

  WATERMILLS

  [Features]
  ·Strong twist.
  ·Quieter and smoother cutting.
  ·Can be used for both roughing and finishing.
  ·The unique groove shape enables smooth chip shape and discharge.
  ·Center cut.
  ·It has a cylindrical second angle to prevent chattering.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.3 ～ 4	12 ～ 50	3	39 ～ 104	Aluminum[○] / Copper[○]	3 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 4,039.96
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANKO MFG	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	SANDVIK	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	TAIYO-TOOL	VAN HOORN	SANDVIK	SANDVIK	OSG	OSG	OSG	OSG	UNION TOOL	GUHRING	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	WATERMILLS
Product Series	SAGVR2T SA Coated Carbide Radius 2-Flute	SCD2 End Mill with Corner R, 2-Flute, Non-Coated	SCD2A End Mill with Corner R, 2-Flute, OK Coated	SCE4A Ultra-Strong Radius, 4-Flute, OK Coated	SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated	Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type	Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type	Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)	One Cut Super Radius End Mill DV-OCSRLN	One Cut Super Radius End Mill DV-OCSR	One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type	Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367	Square End Mill, Regular, 2-Flute Corner R 3561	Square End Mill, Regular, Strong Torsion Multi-Blade Corner (6/8-Flute) Corner R 3563	Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722	Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361	Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363	Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362	CoroMill Plura, Carbide Solid End Mill Radius	CBN 2-Flute Corner Radius End Mill SBRE-2	CBN 2-Flute Corner Radius End Mill SBREF-2	CBN 3-Flute Corner Radius End Mill SBRE-3	CBN 3-Flute Corner Radius End Mill SBREF-3	End Mill with 2 Carbide Flutes and Corner Radius KSRA-2	Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC	Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC	End Mill with 4 Carbide Flutes and Corner Radius KSRA-4	Steam Carbide Radius End Mill CT-STE4R (Z10)	TiAlN Coat, Carbide long neck radius end mill, 4 flutes	CoroMill Plura HD, Carbide Solid Radius End Mill (With square center-cut oil hole)	CoroMill Plura HD, End Mill, Roughing and Finish Milling, Without Center Cut, 2F342-PC-1730	CBN End Mills 2Flutes Long Neck Radius	Titanium Alloy Processed for High Feed Radius End Mills (Multiple Flutes)	Uneven Lead End Mill (5 Flutes) For Machining FX Coated Titanium Alloy	Uneven Lead End Mill (5 Flutes, Long Type) For Machining FX Coated Titanium Alloy	Union Tool Carbide End Mill	All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872	GSX MILL VL Long Shank Radius 1.5D GSXVLLS4-R-1.5D	GSX MILL VL Multi-blade Radius 2.5D GSXVL6-R-2.5D	GSX, Multi-Flute, Radius, 2.5D, for Ti/SUS, GSXVL6T-R-2.5D	Diamond Coated General Purpose Router with Corner Radius	WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating
From	₹ 5,803.95	₹ 4,911.91	₹ 6,369.16	₹ 6,369.16	₹ 6,369.16	₹ 6,630.35	₹ 5,935.20	₹ 7,325.49	₹ 6,871.44	₹ 9,238.15	₹ 6,689.29	₹ 12,649.58	₹ 14,806.02	₹ 11,162.85	₹ 5,120.47	₹ 79,999.20	₹ 79,999.20	₹ 22,748.24	₹ 5,833.04	₹ 5,833.04	₹ 11,457.15	₹ 10,625.76	₹ 16,655.33	₹ 15,952.15	₹ 28,687.11	₹ 18,766.22	₹ 6,664.80	₹ 10,605.29	₹ 7,017.05	₹ 8,593.31	₹ 12,852.80	₹ 3,478.58	₹ 12,054.89	₹ 11,011.51	₹ 14,409.55	₹ 33,861.56	₹ 16,478.91	₹ 21,307.44	₹ 18,445.85	₹ 54,849.49	₹ 8,047.05	₹ 9,549.85	₹ 9,549.85	₹ 23,659.40	₹ 4,039.96
Days to Ship	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	23 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more
Blade diameter (D)(φ)	3 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	6 ～ 22	6 ～ 20	6 ～ 20	6 ～ 22	6 ～ 10	3 ～ 20	4 ～ 16	2 ～ 20	3 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	3 ～ 16	6 ～ 16	6 ～ 16	-	0.3 ～ 6	0.3 ～ 3	3 ～ 6	0.3 ～ 2	0.5 ～ 3	8 ～ 16	3 ～ 16	1 ～ 3	6 ～ 25	0.4 ～ 2	-	-	12 ～ 25	16 ～ 25	12 ～ 25	12 ～ 25	-	6 ～ 25	3 ～ 20	6 ～ 20	6 ～ 20	4 ～ 12	3 ～ 20
R Size(mm)	0.5 ～ 5	0.2 ～ 2	0.2 ～ 2	0.5 ～ 2	0.5 ～ 2	0.4 ～ 5	0.4 ～ 5	0.5 ～ 4	0.5 ～ 5	0.5	0.2 ～ 1	1 ～ 3	0.5 ～ 3	0.5 ～ 3	1 ～ 2.5	-	-	-	0.5 ～ 2	0.5 ～ 1	1 ～ 2	-	-	-	-	-	-	-	-	-	1 ～ 4	0.05 ～ 0.2	0.5 ～ 6.35	0.5 ～ 2	R0 ～ R6	-	R0 ～ R6	R0 ～ R6	-	0.5 ～ 3	0.2 ～ 3	0.3 ～ 3	0.3 ～ 3	-	0.3 ～ 4
Blade length (ℓ)(mm)	10 ～ 45	12 ～ 36	12 ～ 36	8 ～ 24	8 ～ 24	9 ～ 33	17 ～ 45	9 ～ 33	9 ～ 33	21 ～ 34	8 ～ 38	6 ～ 24	4 ～ 40	8 ～ 38	-	-	-	10 ～ 22	-	-	-	-	0.3 ～ 2	0.3 ～ 2	1.5 ～ 2	0.5 ～ 1.5	1.5 ～ 10	12 ～ 24	6 ～ 32	3 ～ 10	15 ～ 50	0.6 ～ 3	-	-	24 ～ 50	5	24 ～ 50	48 ～ 100	0.15 ～ 1	13 ～ 45	4.5 ～ 30	15 ～ 50	15 ～ 50	12 ～ 36	12 ～ 50
Number of flutes(sheet)	2	2	2	4	4	3	2	3	2	4	4	3	3	4	3	2	6 ～ 8	2	4	6	4	-	2	2	3	3	2	3	3	4	4	4	4	5	4	6 ～ 8	5	5	2	4	4	6	6	4	3
Overall Length (L)(mm)	50 ～ 115	70 ～ 110	70 ～ 110	70 ～ 110	70 ～ 110	80 ～ 200	55 ～ 115	60 ～ 120	80 ～ 200	60 ～ 90	60 ～ 125	80 ～ 185	70 ～ 185	60 ～ 125	57 ～ 104	57 ～ 104	57 ～ 104	57 ～ 83	57 ～ 92	75 ～ 150	75 ～ 150	-	50 ～ 60	50 ～ 60	50 ～ 70	50	60	100 ～ 160	60 ～ 100	60	70 ～ 130	64	57 ～ 104	57 ～ 104	90 ～ 140	120	90 ～ 140	110 ～ 190	50	57 ～ 121	60 ～ 160	50 ～ 100	50 ～ 100	62 ～ 86	39 ～ 104
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	Aluminum[◎] / Copper[◎]	-	-	-	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Titanium[◎]	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	-	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○]	Quenched and tempered steel[○] / Stainless Steel[○]	general steel[○] / Cast Iron[○]	-	-	-	-	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Cast Iron[○]	Stainless Steel[○] / Titanium[○]	-	Aluminum[○] / Copper[○]
Shank diameter (d)(mm)	6 ～ 20	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	5.8 ～ 20	6 ～ 20	6 ～ 20	5.8 ～ 20	6 ～ 10	6 ～ 20	4 ～ 16	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 16	6 ～ 16	6 ～ 16	-	6	4	6	4	3	6 ～ 14	6 ～ 16	3	6 ～ 25	6	6 ～ 20	6 ～ 20	12 ～ 25	16 ～ 25	12 ～ 25	12 ～ 25	4	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	4 ～ 12	3 ～ 20
Underneck length (ℓ1)(mm)	-	-	-	15 ～ 42	15 ～ 42	-	-	-	-	-	-	20 ～ 120	6 ～ 15	10 ～ 15	21 ～ 44	-	-	21 ～ 38	21 ～ 44	39 ～ 105	39 ～ 105	-	-	-	-	-	-	-	-	-	-	2 ～ 8	-	-	36 ～ 75	-	36 ～ 75	60 ～ 125	-	21 ～ 65	15 ～ 100	-	-	-	-
Machining Application	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Groove	Plane / Groove	Plane / Side / Groove	Plane / Side / Groove	Side / Groove	Side / Groove	Side / Groove	Side	Side	Side / Groove	Side / Curved surface	Side / Curved surface	Side / Curved surface	-	-	-	-	-	-	-	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts
Coating	TiAlN	Non-Coated	TiAlN	TiAlN	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	-	-	-	Non-Coated	-	-	Dia Coat	Other	Other	Other	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	DLC	DLC	TiAlN	Non-Coated	TiAlN	-	-	-	-	-	-	-	Other	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	-	Non-Coated
Type	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	Long-Neck Radius	-	radius	radius	High-Feed Radius	High-Feed Radius	radius	-	-	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	-	-	-	-	No torsion	Standard torsion (30-40°)	Other	Other	Other	-	Powerful Torsion (45°-60°)
R Precision(μm)	0～+0.04	-	-	-	-	0.025～-0.025	0.025～-0.025	0.025～-0.025	0.025～-0.025	-	-	0.015～-0.015	0.015～-0.015	0.02～-0.02	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0～-0.05	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...