Carbide Ball End Mills

• You can add up to 6 items per a category to the compare list. Compare

  

  General Ball Nose End Mill, Micro Grain Carbide, Long Length, Series 464BN

  OSG

  General ball nose end mill, Ball nose, Metric sizes, Long length

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  -	-	-	3 ～ 25	4	57 ～ 127	-	-	-	-	-

  From: ₹ 1,794.00
  Days to Ship: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  HM Coated 2-flute, Long Neck Ball HSLB

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 60	3 ～ 6	2	45 ～ 120	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	-0.005～0.005 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 1,854.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model

  MISUMI

  4-flute ball for graphite that achieves high feed

  • DIA
  • Graphite
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	4 ～ 24	-	6 ～ 12	4	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	Dia Coat	Ball

  From: ₹ 6,439.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

  NS TOOL

  Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.3 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: ₹ 2,168.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRBH230 Long-Neck Ball, Hard (for High Hardness)

  NS TOOL

  The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 2,182.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Long shank type, ideal for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,008.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball-End Type, GX-EQD-SF

  OSG

  Ball end mill with spherical cutting edge developed for shrink fitting.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  10	15	-	12	2	58	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Spherical Ball

  From: ₹ 25,989.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSB, HM Coated 2-Flute Ball

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.03 ～ 6	0.06 ～ 22	-	4 ～ 12	2	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	-0.007～0.007 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,829.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Significantly enhances machining efficiency.
  · The chip discharge capacity is up to 27 times higher (compared to the manufacturer's previous product)
  · With the newly developed ball tip shape, the bottom surface is treated with non-polish processing
  · Reasonable price setting
  · Has 4 flutes but is still cheaper than 3-flute types from other companies

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	3 ～ 18	-	4 ～ 12	4	50 ～ 110	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-0.01～0.01 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,394.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

  NS TOOL

  World's smallest ball end mill "Micro Ball" extends the microfabrication area

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.005 ～ 0.05	0.01 ～ 0.1	-	4	1	45	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,912.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Spherical Cutter, 2-Flute

  EIKOSHA

  Spherical cutter with effective angle of 280° (small type is 220° or 240°).
  [Features]
  · Can be used for various applications thanks to its wide effective angle.
  [Applications]
  · Used for rounded molding, cross hole machining, and front/back surface deburring, and chamfering.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	-	4 ～ 42	4 ～ 16	2	70 ～ 100	-	±0.01 ～ ±0.02	-	-	Spherical Ball

  From: ₹ 9,345.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Ball End Mill CSBE

  EIKOSHA

  [Features]
  · 2-flute carbide solid ball end mill.
  · For shape machining.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 20	3 ～ 70	-	4 ～ 32	2	45 ～ 180	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 7,570.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HTNB HM coat 2-flute taper neck ball end mill

  UNION TOOL

  [Features]
  · High rigidity realized through an improved taper neck shape.
  · Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
  · 65 HRC high hardness materials can also be cut

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.16 ～ 50	1.5 ～ 62	4 ～ 6	2	4 ～ 120	general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎]	-0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.)	Tapered neck ball

  From: ₹ 3,800.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]
  · High-accuracy ball end mill coated with WXL hard lubricating film coating.
  Proven performance on a wide range of work materials.
  Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.007 to 0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,011.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MCD Diamond Tip Ball 2 Flutes

  VAN HOORN

  [Features]
  · The cutting edge is a diamond tip. The tool service life is 2 to 5 times that of PCD and 10 to 20 times that of diamond coated.
  · Ideal for machining graphite and composite materials such as CFRP, etc. Provides a beautiful aluminum finish too.
  · European-made high quality for peace of mind.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  6	12	30	12	2	78	Aluminum[◎] / Graphite[◎] / Resin[○]	-	-	Non-Coated	Ball

  From: ₹ 113,716.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Union Tool Carbide End Mill

  UNION TOOL

  [Features]
  · Diamond coating for cemented carbide machining has outstanding hardness, toughness and adhesive strength.
  · Phenomenal deep cutting has been achieved through adoption of a blade shape optimized for cemented carbide.
  · Achieves tear-free, excellent machined surfaces, especially from medium rough to finish machining.
  [Material]
  · Ultrafine particle alloy (MG)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  R0.1 ～ R3	0.14 ～ 4.2	0.1 ～ 15	4 ～ 6	-	50 ～ 60	-	-	-	-	Long-Neck Ball

  From: ₹ 15,495.59
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]
  ·General purpose 2-blade ball end mill for wide range of profiling
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 1,260.11
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model

  MISUMI

  Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity

  • CrN
  • Copper
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Aluminum[○] / Copper[◎] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	CrN	Ball

  From: ₹ 2,252.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)

  MISUMI

  Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!

  • DIA
  • Graphite
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 3	0.6 ～ 7.5	2 ～ 60	4 ～ 6	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	Dia Coat	Long-Neck Ball

  From: ₹ 4,674.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Spherical Cutter, 4-Flute

  EIKOSHA

  For profiling and deburring of back surfaces, curved surfaces, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	-	18 ～ 42	6 ～ 16	4	70 ～ 100	-	±0.01 ～ ±0.02	-	-	Spherical Ball

  From: ₹ 13,566.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill SBEL

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	5 ～ 80	-	4 ～ 32	2	45 ～ 150	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	0～-50	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 8,379.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 4-flute / long neck model

  MISUMI

  [Features]
  ·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 3	1.6 ～ 6	4 ～ 30	4 ～ 6	4	50 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

  MISUMI

  [Features]
  ·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).
  ·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5	1 ～ 5	5 ～ 10	6 ～ 10	2	50 ～ 90	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 5,879.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

  MISUMI

  High-performance MRC series is available in the industry's largest number of sizes

  • MR
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 8	0.2 ～ 60	4 ～ 6	2	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	±0.005	Curved surface / Side / Engraving / R Groove	MRC	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-SXB

  OSG

  Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.3 ～ 1.8	1.2 ～ 6	4 ～ 6	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 19,114.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD

  OSG

  End mill with diamond coating dedicated for graphite.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 2	0.6 ～ 6	4 ～ 60	4	2	50 ～ 100	Aluminum[○] / Graphite[◎] / Resin[◎]	-0.01～+0.01 ～ -0.008～+0.008	Curved surface / Side / Engraving / R Groove	DG	Long-Neck Ball

  From: ₹ 16,507.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]
  · 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
  · The newly developed diamond coating film achieves outstanding wear resistance
  · Adopts a highly adhesive coating film for longer product life

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 3	0.32 ～ 6	2 ～ 80	4 ～ 6	2	45 ～ 120	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	-0.01～0.01	Curved surface / Side / Engraving / R Groove	Dia Coat	Long-Neck Ball

  From: ₹ 6,426.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]

  UNION TOOL

  [Features]
  · 3-flute type achieves remarkably high feed. Shortens the roughing time
  · Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased
  · Designed with 3-flute variable split to suppress chatter.
  · It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC
  · Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.9 ～ 18	-	4 ～ 12	3	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎]	-0.01～0.01 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: ₹ 3,158.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)

  NS TOOL

  Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 15	4 ～ 6	2	35 ～ 45	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,121.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill

  NS TOOL

  The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.2 ～ 4	1 ～ 60	4 ～ 8	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / R Groove	TiAlN	Tapered neck ball

  From: ₹ 3,451.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT Coat, 2-flute Ball CSEB

  UNION TOOL

  [Features]
  · With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
  · New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
  · Supports a wide range from copper and raw materials to 55 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  R0.05 ～ R6	0.1 ～ 22	-	4 ～ 12	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: ₹ 1,829.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Miniature Ball End Mill NCB-2

  NS TOOL

  Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 0.9	0.8 ～ 3.6	-	3	2	35	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 6,000.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Spherical Cutter, 4-Flute Long Type

  EIKOSHA

  Long neck type for profiling and deburring of back surfaces, curved surfaces, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	-	18 ～ 42	6 ～ 16	4	100 ～ 130	-	±0.01 ～ ±0.02	-	-	Spherical Ball

  From: ₹ 17,604.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura Carbide Ball End Mill, Diamond Coated, 2B230

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	3 ～ 22	-	3 ～ 12	2	38 ～ 83	High Hardness Steel-HRC65[○] / Graphite[○] / Resin[○]	-	Curved surface	Other	Ball

  From: ₹ 17,298.62
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Cut Ball 70 End Mill DH-OCHB Type

  DIJET

  [Features]
  · One mill for roughing to finishing high-hardness material.
  · 4-blade solid ball end mill, capable of machining even 70 HRC hardness.
  · Reduces chattering by using high tool rigidity and unequal divisions.
  · Implements good cutting performance with low resistance, with a torsion angle of 45°.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  -	9	24	-	4	-	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	±8	Curved surface / Engraving / R Groove	Other	Ball

  From: ₹ 8,221.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S

  UNION TOOL

  [Features]
  · Can be used for machining at short overhang lengths.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 20	4 ～ 6	2	35 ～ 50	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Titanium[○] / Copper[○]	±3 ～ ±5	-	-	Long-Neck Ball

  From: ₹ 1,830.54
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  General Ball Nose End Mill, Micro Grain Carbide, Regular, Series 402BN

  OSG

  General ball nose end mill, Ball nose, Metric sizes
  Tolerance for cutter Diameter:
  - Smaller than Dia 3mm: +0.000/-0.025
  - Dia 3mm and Larger: +0.000/-0.038

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  -	-	-	3 ～ 25	2	39 ～ 102	-	-	-	-	-

  From: ₹ 1,002.00
  Days to Ship: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Long shank type ideal for deep cavity milling
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 30	15 ～ 80	3 ～ 25	2	70 ～ 280	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

  MISUMI

  A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 5	-	4 ～ 55	6 ～ 10	2	70 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball / Spherical Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 4-Flute / Short Type

  MISUMI

  [Features]
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 10	3 ～ 25	15 ～ 75	6 ～ 20	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

  MISUMI

  [Features]
  ·High-feed, high stiffness 3-flute taper shape with taper length
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 6	7 ～ 60	4 ～ 8	3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 2-flute / long neck model

  MISUMI

  [Features]
  ·Long neck shape suitable for deep cavity milling
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 8	0.2 ～ 60	3 ～ 8	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

  MISUMI

  [Features]
  ·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
  ·Taper neck is effective in suppressing chattering
  ·Machining of high hardness steel up to 65HRC is possible
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	20 ～ 50	4 ～ 8	3	70 ～ 110	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  From: ₹ 3,991.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

  MISUMI

  A type for aluminum that achieves high efficiency while having the affordable uncoated design

  • Non-Coated
  • Aluminum
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	14 ～ 68	4 ～ 12	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	UNION TOOL	MISUMI	NS TOOL	NS TOOL	MISUMI	OSG	UNION TOOL	UNION TOOL	NS TOOL	EIKOSHA	EIKOSHA	UNION TOOL	OSG	VAN HOORN	UNION TOOL	MISUMI	MISUMI	MISUMI	EIKOSHA	DIJET	MISUMI	MISUMI	MISUMI	OSG	OSG	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	EIKOSHA	SANDVIK	DIJET	UNION TOOL	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	General Ball Nose End Mill, Micro Grain Carbide, Long Length, Series 464BN	HM Coated 2-flute, Long Neck Ball HSLB	Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	MRBH230 Long-Neck Ball, Hard (for High Hardness)	XAC series carbide ball end mill, 2-flute / short, long shank model	Ball-End Type, GX-EQD-SF	HSB, HM Coated 2-Flute Ball	HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]	NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining	Carbide Solid Spherical Cutter, 2-Flute	Carbide Solid Ball End Mill CSBE	HTNB HM coat 2-flute taper neck ball end mill	Ball End Type, 2-Flute WXL-EBD	MCD Diamond Tip Ball 2 Flutes	Union Tool Carbide End Mill	XAC series carbide ball end mill, 2-flute / short model	CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)	Carbide Solid Spherical Cutter, 4-Flute	Solid ball end mill SBEL	TSC series carbide long neck ball end mill, 4-flute / long neck model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model	Ball End Type, 2-Flute CBN-SXB	Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD	DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill	CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]	MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)	MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill	UT Coat, 2-flute Ball CSEB	Miniature Ball End Mill NCB-2	Carbide Solid Spherical Cutter, 4-Flute Long Type	CoroMill Plura Carbide Ball End Mill, Diamond Coated, 2B230	Single Cut Ball 70 End Mill DH-OCHB Type	2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S	General Ball Nose End Mill, Micro Grain Carbide, Regular, Series 402BN	XAL series carbide ball end mill, 2-flute / short model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model	TSC Series Carbide Ball End Mill 4-Flute / Short Type	TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model	TSC series carbide long neck ball end mill, 2-flute / long neck model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model
From	₹ 1,794.00	₹ 1,854.07	₹ 6,439.58	₹ 2,168.82	₹ 2,182.20	₹ 3,008.00	₹ 25,989.95	₹ 1,829.96	₹ 3,394.38	₹ 5,912.42	₹ 9,345.09	₹ 7,570.91	₹ 3,800.22	₹ 3,011.00	₹ 113,716.05	₹ 15,495.59	₹ 1,260.11	₹ 2,252.40	₹ 4,674.82	₹ 13,566.02	₹ 8,379.60		₹ 5,879.24		₹ 19,114.84	₹ 16,507.04	₹ 6,426.76	₹ 3,158.65	₹ 3,121.13	₹ 3,451.95	₹ 1,829.96	₹ 6,000.82	₹ 17,604.82	₹ 17,298.62	₹ 8,221.11	₹ 1,830.54	₹ 1,002.00							₹ 3,991.73
Days to Ship	4 Day(s)	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	4 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications			DIA Graphite 4 Flutes S (Short)			TiAlN General Steel 2 Flutes											TiAlN General Steel 2 Flutes S (Short)	CrN Copper 2 Flutes S (Short)	DIA Graphite 2 Flutes			TS General Steel 4 Flutes	TS High-Hardness Steel 2 Flutes	MR General Steel 2 Flutes S (Short)														XAL General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 3 Flutes	TS General Steel 2 Flutes	TS High-Hardness Steel 3 Flutes	Non-Coated Aluminum 2 Flutes S (Short)
R Size(mm)	-	0.05 ～ 3	1 ～ 6	0.05 ～ 3	0.05 ～ 3	2 ～ 8	10	0.03 ～ 6	1 ～ 6	0.005 ～ 0.05	0.5 ～ 10	0.4 ～ 20	0.1 ～ 2	0.05 ～ 10	6	R0.1 ～ R3	0.2 ～ 12.5	0.5 ～ 6	0.2 ～ 3	3 ～ 10	0.5 ～ 15	1 ～ 3	1 ～ 5	0.05 ～ 3	0.2 ～ 1.5	0.2 ～ 2	0.2 ～ 3	0.3 ～ 6	0.1 ～ 3	0.1 ～ 2	R0.05 ～ R6	0.2 ～ 0.9	3 ～ 10	0.5 ～ 6	-	0.1 ～ 3	-	0.05 ～ 10	0.5 ～ 12.5	0.5 ～ 5	1 ～ 10	0.5 ～ 3	0.05 ～ 3	0.5 ～ 3	0.5 ～ 6
Blade length (ℓ)(mm)	-	0.08 ～ 4.8	4 ～ 24	0.07 ～ 6	0.07 ～ 6	8 ～ 30	15	0.06 ～ 22	3 ～ 18	0.01 ～ 0.1	-	3 ～ 70	0.16 ～ 50	0.2 ～ 38	12	0.14 ～ 4.2	0.8 ～ 50	1.5 ～ 18	0.6 ～ 7.5	-	5 ～ 80	1.6 ～ 6	1 ～ 5	0.07 ～ 8	0.3 ～ 1.8	0.6 ～ 6	0.32 ～ 6	0.9 ～ 18	0.2 ～ 6	0.2 ～ 4	0.1 ～ 22	0.8 ～ 3.6	-	3 ～ 22	9	0.16 ～ 4.8	-	0.2 ～ 38	2 ～ 30	-	3 ～ 25	0.8 ～ 6	0.07 ～ 8	0.8 ～ 4.8	1.5 ～ 18
Underneck length (ℓ1)(mm)	-	0.3 ～ 60	-	0.3 ～ 50	0.2 ～ 50	-	-	-	-	-	4 ～ 42	-	1.5 ～ 62	-	30	0.1 ～ 15	-	-	2 ～ 60	18 ～ 42	-	4 ～ 30	5 ～ 10	0.2 ～ 60	1.2 ～ 6	4 ～ 60	2 ～ 80	-	0.5 ～ 15	1 ～ 60	-	-	18 ～ 42	-	24	0.5 ～ 20	-	-	15 ～ 80	4 ～ 55	15 ～ 75	7 ～ 60	0.2 ～ 60	20 ～ 50	14 ～ 68
Shank diameter (d)(mm)	3 ～ 25	3 ～ 6	6 ～ 12	4 ～ 6	4 ～ 6	4 ～ 16	12	4 ～ 12	4 ～ 12	4	4 ～ 16	4 ～ 32	4 ～ 6	4 ～ 20	12	4 ～ 6	3 ～ 25	4 ～ 12	4 ～ 6	6 ～ 16	4 ～ 32	4 ～ 6	6 ～ 10	4 ～ 6	4 ～ 6	4	4 ～ 6	4 ～ 12	4 ～ 6	4 ～ 8	4 ～ 12	3	6 ～ 16	3 ～ 12	-	4 ～ 6	3 ～ 25	3 ～ 20	3 ～ 25	6 ～ 10	6 ～ 20	4 ～ 8	3 ～ 8	4 ～ 8	4 ～ 12
Number of flutes(sheet)	4	2	4	2	2	2	2	2	4	1	2	2	2	2	2	-	2	2	2	4	2	4	2	2	2	2	2	3	2	2	2	2	4	2	4	2	2	2	2	2	4	3	2	3	2
Overall Length (L)(mm)	57 ～ 127	45 ～ 120	50 ～ 80	45 ～ 120	45 ～ 120	100 ～ 250	58	50 ～ 110	50 ～ 110	45	70 ～ 100	45 ～ 180	4 ～ 120	40 ～ 160	78	50 ～ 60	40 ～ 180	50 ～ 120	50 ～ 110	70 ～ 100	45 ～ 150	50 ～ 70	50 ～ 90	50 ～ 110	45 ～ 50	50 ～ 100	45 ～ 120	50 ～ 120	35 ～ 45	50 ～ 110	50 ～ 110	35	100 ～ 130	38 ～ 83	-	35 ～ 50	39 ～ 102	40 ～ 160	70 ～ 280	70 ～ 90	50 ～ 150	50 ～ 110	40 ～ 110	70 ～ 110	50 ～ 110
work material	-	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	-	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Aluminum[◎] / Graphite[◎] / Resin[○]	-	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	-	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[○] / Graphite[◎] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	-	High Hardness Steel-HRC65[○] / Graphite[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Titanium[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]
R Precision(μm)	-	-0.005～0.005 ～ -0.002～0.002	±0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005	±0.01	-0.01～+0.01	-0.007～0.007 ～ -0.002～0.002	-0.01～0.01 ～ -0.005～0.005	0.002～-0.002	±0.01 ～ ±0.02	±0.02	-0.005～0.005	-0.007 to 0.003 ～ ±0.01	-	-	±0.01	±0.01	±0.01	±0.01 ～ ±0.02	0～-50	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.005	-0.005～+0.005	-0.01～+0.01 ～ -0.008～+0.008	-0.01～0.01	-0.01～0.01 ～ -0.005～0.005	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	-0.007～0.007 ～ -0.005～0.005	0.01～-0.01	±0.01 ～ ±0.02	-	±8	±3 ～ ±5	-	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	±0.01
Machining Application	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	Curved surface / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	Curved surface	Curved surface / Engraving / R Groove	-	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove
Coating	-	For High Hardness (Silicon Group)	Dia Coat	TiAlN	For High Hardness (Silicon Group)	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	-	-	For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	-	TiAlN	CrN	Dia Coat	-	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	MRC	Non-Coated	DG	Dia Coat	TiCN	TiAlN	TiAlN	TiCN	Non-Coated	-	Other	Other	-	-	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated
Type	-	Long-Neck Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Spherical Ball	Ball	Ball	Ball	Spherical Ball	Ball	Tapered neck ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Spherical Ball	Ball	Long-Neck Ball	Ball	Long-Neck Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Tapered neck ball	Ball	Ball	Spherical Ball	Ball	Ball	Long-Neck Ball	-	Ball	Ball	Long-Neck Ball / Spherical Ball	Ball	Tapered neck ball	Long-Neck Ball	Tapered neck ball	Ball

Loading...