Carbide Radius End Mills

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X

  7 LEADERS

  [Features]
  · Also use the 4-flute short radius end mill to prevent tip chipping.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.
  · It supports high-speed side cutting.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 4	3 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Resin[○]	4 ～ 20	-	Plane / Side / Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  MISUMI

  4-Flute Radius for High-Efficiency and High-Speed Machining

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	16 ～ 56	4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 16	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02 ～ 10

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / regular model

  MISUMI

  [Features]
  ·General purpose 2-flute end mill with regular flute length type with cutting edge radius
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 3	3 ～ 60	2	45 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	23 ～ 55	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLRS2000 HM Coated 2-Flute Long Neck Radius

  UNION TOOL

  [Features]
  · Long neck radius shape that exhibits power in high-performance and high-quality machining
  · Capable of cutting everything from raw materials to high-hardness materials
  · Capable of stable, long-life machining for both dry and wet type

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.4 ～ 6	0.05 ～ 1	0.4 ～ 6	2	50 ～ 120	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	4 ～ 6	1 ～ 60	Plane / Side / Curved surface / Groove / Plunging (Z feed)	For High Hardness (Silicon Group)	Long-Neck Radius	Standard torsion (30-40°)	-

  From: ₹ 3,048.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45°, regular model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 56	4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface

  OSG

  Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 8	0.1	0.9 ～ 1.2	4	90 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	6 ～ 8	9 ～ 12	Plane / Side / Curved surface	TiAlN	radius	No torsion	-

  From: ₹ 10,051.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

  MISUMI

  Small radius type that prevents cutter marks on resin

  • Non-Coated
  • Resin
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 10	0.2	3 ～ 30	2	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	3 ～ 10	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 2,434.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X

  7 LEADERS

  [Features]
  · Also use the 4-flute medium shank radius end mill to prevent tip chipping.
  · Enables radius cutting deep into the work materials.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.
  · It supports high-speed side cutting.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 4	10 ～ 55	4	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	3 ～ 20	-	Plane / Side / Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 3	2 ～ 40	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	17 ～ 45	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HRRS, HM Coated 4-Flute Short Shank Radius

  UNION TOOL

  [Features]
  · Unique corner rounding creates larger cutting depth and pick feed than with a ball
  · The seamless corner radius shape reduces cutting resistance and chattering
  · High hardness materials up to 65 HRC can also be machined

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.3 ～ 4	2 ～ 12	4	45 ～ 75	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○]	3 ～ 12	6 ～ 36	Plane / Side / Curved surface	-	Long-Neck Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 4,495.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HRRS, HM Coat, 4-Flute Radius

  UNION TOOL

  [Features]
  · Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool
  · The optimized corner radius size enables processing with larger feed than conventional
  · Seamless Corner Radius Shape
  · High hardness materials up to 65 HRC can also be machined

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.3 ～ 4	2 ～ 12	4	70 ～ 120	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○]	3 ～ 12	6 ～ 36	Plane / Side / Curved surface	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 4,881.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels

  NS TOOL

  Superior surface finish with excellent chipping prevention and reduced chattering due to the use of MUGEN coating for hardened steels and a new shape

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	0.05 ～ 1	0.8 ～ 5	4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	4 ～ 6	2 ～ 48	Plane / Side / Groove	For High Hardness (Silicon Group)	Long-Neck Radius	Standard torsion (30-40°)	0.005 to -0.005 ～ 0.01～-0.01

  From: ₹ 3,959.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill, Regular, 4-Flute Corner R 3562

  GUHRING

  [Features]
  · Ideal for corner rounding of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	-	-	4	57 ～ 104	-	6 ～ 20	-	-	-	radius	Standard torsion (30-40°)	-

  From: ₹ 10,265.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Corner Radius Medium End Mill 30° B257X

  7 LEADERS

  [Features]
  · Also use the 2-flute medium shank radius end mill to prevent tip chipping.
  · Enables radius cutting deep into the work materials.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 4	10 ～ 55	2	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	3 ～ 20	-	Plane / Side / Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 4-flute / short model

  MISUMI

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 3	8 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.5 ～ 3	4 ～ 40	4	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 4,792.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  MISUMI

  Long neck type with interference prevention can be selected from a number of effective lengths

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 16	1 ～ 3	6 ～ 24	4	70 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 16	28 ～ 120	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 5,120.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	5 ～ 56	3	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

  MISUMI

  Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products

  • Non-Coated
  • Aluminum
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	2	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	4 ～ 12	23 ～ 50	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Powerful Torsion (45°-60°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

  MISUMI

  The diamond coated radius shape that's ideal for shaping graphite

  • DIA
  • Graphite
  • 4 Flutes
  • Long

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 3	30 ～ 60	4	150 ～ 200	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	6 ～ 12	60 ～ 85	Plane / Side / Curved surface / Inclined Cuts	Dia Coat	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 15,280.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
  ·Long neck type is ideal for deep cavity milling of deep pockets, etc.
  ·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	1 ～ 2	8 ～ 24	3	70 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	28 ～ 90	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 4,818.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

  MISUMI

  Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.1 ～ 3	4 ～ 45	2 ～ 4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Super Radius End Mills

  OSG

  A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 13	1.2 ～ 3	2 ～ 5.5	4	80 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎]	6 ～ 12	12.5	Plane / Side / Curved surface	TiAlN	radius	No torsion	-

  From: ₹ 9,397.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRRS UT Coat 4-Flute Radius

  UNION TOOL

  [Features]
  · Suitable for everything from raw materials to 55 HRC, the UTCOAT provides a long life
  · Variable split, high torsion and positive rake angle design enables stable machining
  · A blade design that reduces the cutting resistance in helical and inclined use, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.3 ～ 2	2 ～ 12	4	60 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]	4 ～ 12	6 ～ 36	Plane / Side / Curved surface	-	Long-Neck Radius	-	-

  From: ₹ 4,977.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSR200 CBN Super Speed Radius End Mill

  NS TOOL

  Achieves high-efficiency machining of corner radius due to outstanding CBN durability

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 2	0.02 ～ 0.5	0.08 ～ 1.2	2	48 ～ 53	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	0.5 ～ 10	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	No torsion	0.005～-0.005

  From: ₹ 12,716.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill

  NS TOOL

  The tuned Infinity coating is effective for machining quenched and tempered steel, making it ideal for processing copper electrodes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 6	0.05 ～ 1	0.15 ～ 9	2	45 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	4 ～ 6	0.5 ～ 48	Plane / Side / Curved surface / Groove	TiAlN	Long-Neck Radius	Standard torsion (30-40°)	0.005～-0.005 ～ 0.01～-0.01

  From: ₹ 3,071.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSR-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	-	3 ～ 13	2	40 ～ 50	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 5,116.45
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC

  KYOWA SEIKO

  [Specifications]
  · Shape: Radius End Mill (carbide)
  · Material: Super Micro Grain Alloy
  · Work Materials: Aluminum [◎], Copper [◎]
  [Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	-	4.5 ～ 24	3	60 ～ 120	Aluminum[◎] / Copper[◎]	6 ～ 16	-	Plane / Side / Curved surface / Groove / Inclined Cuts	DLC	-	Powerful Torsion (45°-60°)	-

  From: ₹ 6,524.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPEED/T 4 Flute Anti-Vibration Radius

  Poulten&Graf

  [Features]
  · Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.
  · Total length of 100 mm and inexpensive so that it's easy to use.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6	2	15	4	100	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	6	-	Side / Curved surface / Groove / Inclined Cuts	AlTiN	Long-Neck Radius	Standard torsion (30-40°)	±0.01

  From: ₹ 3,565.44
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

  SANDVIK

  [Features]
  · Twice the cutting depth that was conventionally possible
  · Ideal for everything from shoulder cutting to full grooving.
  · With reinforced edge lines, assures long product life even with intense machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  -	0.2 ～ 3.05	-	4	57 ～ 104	general steel[○] / Cast Iron[○]	6 ～ 20	-	-	-	radius	Standard torsion (30-40°)	-

  From: ₹ 9,432.36
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) XAL series carbide radius end mill, 2-flute / short model

  MISUMI

  Radius end mills are available at low prices

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 30	2 ～ 4	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 1,336.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute / regular model

  MISUMI

  [Features]
  ·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 36	4	45 ～ 85	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	23 ～ 55	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

  MISUMI

  [Features]
  ·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 3	0.05 ～ 0.5	0.16 ～ 6	2	40 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 6	1 ～ 60	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Tapered neck radius	Standard torsion (30-40°)	±0.005 ～ ±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

  MISUMI

  By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.8 ～ 2	4.5 ～ 18	3	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 16	24 ～ 105	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Tapered neck radius	Powerful Torsion (45°-60°)	±0.02

  From: ₹ 4,614.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 2-Flute Radius End Mill

  MISUMI

  [Features]
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 30	2	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	-	-

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

  MISUMI

  [Features]
  ·Effective for deep cutting due to long neck type
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.2 ～ 1	1.5 ～ 30	4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	4 ～ 50	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	-	Long-Neck Radius	-	-

  From: ₹ 2,312.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4XSGEO-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and contour machining of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	50 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: ₹ 6,922.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3 Flutes Short for Copper & Aluminum Alloys

  OSG

  Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.3 ～ 2	13 ～ 26	3	50 ～ 75	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 7,561.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys

  OSG

  High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12	1	18	3	90	Aluminum[◎] / Copper[◎] / Resin[○]	12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 20,195.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius

  OSG

  Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  8 ～ 10	0.3 ～ 2	16 ～ 20	6	60 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	8 ～ 10	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 12,989.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLRS4000 HM Coated 4-Flute Long Neck Radius

  UNION TOOL

  [Features]
  · Long neck radius shape that exhibits power in high-performance and high-quality machining
  · Rigidity-oriented blade shape provides long life even when machining high hardness materials
  · Capable of stable machining for both dry and wet type
  · New HARDMAX coating adopted to improve oxidation resistance.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.8 ～ 6	0.05 ～ 1	0.48 ～ 4.8	4	50 ～ 120	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Copper[○]	4 ～ 6	2 ～ 48	Plane / Side / Curved surface	For High Hardness (Silicon Group)	Long-Neck Radius	Standard torsion (30-40°)	-

  From: ₹ 3,577.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NSR-2 radius end mill

  NS TOOL

  Straight and corner rounding processing can be performed at the same time. Outstanding corner radius precision

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	0.2 ～ 2	3 ～ 18	2	45 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	0.02～-0.02

  From: ₹ 6,220.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSRS230 MUGEN-COATING 2-Flute Radius End Mill

  NS TOOL

  Straight and corner rounding processing can be performed at the same time.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 5	0.1 ～ 1.5	2 ～ 10	2	60 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	0.005～-0.005 ～ 0.01～-0.01

  From: ₹ 4,594.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSRS430 MUGEN-COATING 4-Flute Radius End Mill

  NS TOOL

  Straight and corner rounding processing can be performed at the same time.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.1 ～ 3	12 ～ 24	4	80 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	0.01～-0.01

  From: ₹ 9,353.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Radius End Mill MSXH440R

  NS TOOL

  Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machining

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 3	8 ～ 26	4	60 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	6 ～ 12	-	Plane / Side / Curved surface	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	-

  From: ₹ 4,579.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	7 LEADERS	MISUMI	MISUMI	UNION TOOL	MISUMI	OSG	MISUMI	7 LEADERS	MISUMI	UNION TOOL	UNION TOOL	NS TOOL	GUHRING	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	UNION TOOL	NS TOOL	NS TOOL	KYOWA SEIKO	KYOWA SEIKO	Poulten&Graf	SANDVIK	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL
Product Series	Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	TSC series carbide radius end mill, 2-flute / regular model	HLRS2000 HM Coated 2-Flute Long Neck Radius	TSC series carbide radius end mill, 4-flute, 45°, regular model	Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface	Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model	Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X	TSC series carbide radius end mill, 2-flute / short model	HRRS, HM Coated 4-Flute Short Shank Radius	HRRS, HM Coat, 4-Flute Radius	MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels	Square End Mill, Regular, 4-Flute Corner R 3562	Carbide 2-Flute Corner Radius Medium End Mill 30° B257X	(Economy series) XAL series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model	TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model	XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model	WX Super Radius End Mills	CRRS UT Coat 4-Flute Radius	SSR200 CBN Super Speed Radius End Mill	MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill	End Mill with 2 Carbide Flutes and Corner Radius KSR-2	Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC	SPEED/T 4 Flute Anti-Vibration Radius	CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730	(Economy series) XAL series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, 4-flute / regular model	TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	VAC Series Carbide 2-Flute Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill	X's Mill Geo Radius 4XSGEO-R	3 Flutes Short for Copper & Aluminum Alloys	Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys	Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius	HLRS4000 HM Coated 4-Flute Long Neck Radius	NSR-2 radius end mill	MSRS230 MUGEN-COATING 2-Flute Radius End Mill	MSRS430 MUGEN-COATING 4-Flute Radius End Mill	Power Radius End Mill MSXH440R
From	₹ 2,426.95			₹ 3,048.80		₹ 10,051.16	₹ 2,434.20	₹ 2,426.95		₹ 4,495.36	₹ 4,881.11	₹ 3,959.58	₹ 10,265.09	₹ 2,426.95		₹ 4,792.00	₹ 5,120.00			₹ 15,280.00	₹ 4,818.16		₹ 9,397.55	₹ 4,977.55	₹ 12,716.55	₹ 3,071.56	₹ 5,116.45	₹ 6,524.16	₹ 3,565.44	₹ 9,432.36	₹ 1,336.00			₹ 4,614.55		₹ 2,312.00	₹ 6,922.87	₹ 7,561.24	₹ 20,195.73	₹ 12,989.80	₹ 3,577.87	₹ 6,220.47	₹ 4,594.45	₹ 9,353.33	₹ 4,579.73
Days to Ship	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications		XAL General Steel 4 Flutes	TS General Steel 2 Flutes R (Regular)		TS General Steel 4 Flutes R (Regular)		Non-Coated Resin 2 Flutes R (Regular)		TS General Steel 2 Flutes S (Short)						XAL General Steel 4 Flutes	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes R (Regular)	DIA Graphite 4 Flutes Long	TS High-Hardness Steel 3 Flutes										XAL General Steel 2 Flutes	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)
Blade diameter (D)(φ)	1 ～ 20	3 ～ 20	1 ～ 20	0.4 ～ 6	3 ～ 20	6 ～ 8	1 ～ 10	3 ～ 20	1 ～ 20	2 ～ 12	2 ～ 12	1 ～ 6	6 ～ 20	3 ～ 20	3 ～ 20	2 ～ 20	4 ～ 16	3 ～ 20	2 ～ 12	6 ～ 12	4 ～ 12	2 ～ 20	5 ～ 13	2 ～ 12	0.2 ～ 2	0.2 ～ 6	1 ～ 6	3 ～ 16	6	-	1 ～ 12	1 ～ 12	0.2 ～ 3	3 ～ 12	1 ～ 12	1 ～ 12	3 ～ 20	6 ～ 12	12	8 ～ 10	0.8 ～ 6	1 ～ 6	1 ～ 5	6 ～ 12	3 ～ 12
R Size(mm)	0.1 ～ 4	0.2 ～ 3	0.1 ～ 3	0.05 ～ 1	0.2 ～ 3	0.1	0.2	0.1 ～ 4	0.1 ～ 3	0.3 ～ 4	0.3 ～ 4	0.05 ～ 1	-	0.1 ～ 4	0.1 ～ 3	0.5 ～ 3	1 ～ 3	0.2 ～ 2	0.2 ～ 1	0.5 ～ 3	1 ～ 2	0.1 ～ 3	1.2 ～ 3	0.3 ～ 2	0.02 ～ 0.5	0.05 ～ 1	-	-	2	0.2 ～ 3.05	0.1 ～ 3	0.1 ～ 3	0.05 ～ 0.5	0.8 ～ 2	0.1 ～ 3	0.2 ～ 1	0.2 ～ 3	0.3 ～ 2	1	0.3 ～ 2	0.05 ～ 1	0.2 ～ 2	0.1 ～ 1.5	0.1 ～ 3	0.3 ～ 3
Blade length (ℓ)(mm)	3 ～ 38	16 ～ 56	3 ～ 60	0.4 ～ 6	5 ～ 56	0.9 ～ 1.2	3 ～ 30	10 ～ 55	2 ～ 40	2 ～ 12	2 ～ 12	0.8 ～ 5	-	10 ～ 55	8 ～ 38	4 ～ 40	6 ～ 24	5 ～ 56	5 ～ 36	30 ～ 60	8 ～ 24	4 ～ 45	2 ～ 5.5	2 ～ 12	0.08 ～ 1.2	0.15 ～ 9	3 ～ 13	4.5 ～ 24	15	-	3 ～ 30	3 ～ 36	0.16 ～ 6	4.5 ～ 18	2.5 ～ 30	1.5 ～ 30	8 ～ 38	13 ～ 26	18	16 ～ 20	0.48 ～ 4.8	3 ～ 18	2 ～ 10	12 ～ 24	8 ～ 26
Number of flutes(sheet)	4	4	2	2	4	4	2	4	2	4	4	4	4	2	4	4	4	3	2	4	3	2 ～ 4	4	4	2	2	2	3	4	4	2 ～ 4	4	2	3	2	4	4	3	3	6	4	2	2	4	4
Overall Length (L)(mm)	50 ～ 100	60 ～ 130	45 ～ 125	50 ～ 120	60 ～ 130	90 ～ 100	50 ～ 80	50 ～ 160	40 ～ 110	45 ～ 75	70 ～ 120	50 ～ 110	57 ～ 104	50 ～ 160	50 ～ 100	50 ～ 130	70 ～ 180	60 ～ 130	40 ～ 80	150 ～ 200	70 ～ 140	50 ～ 110	80 ～ 110	60 ～ 120	48 ～ 53	45 ～ 110	40 ～ 50	60 ～ 120	100	57 ～ 104	40 ～ 75	45 ～ 85	40 ～ 100	80 ～ 160	50 ～ 130	50 ～ 110	50 ～ 125	50 ～ 75	90	60 ～ 70	50 ～ 120	45 ～ 60	60 ～ 70	80 ～ 110	60 ～ 80
work material	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	-	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Aluminum[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]
Shank diameter (d)(mm)	4 ～ 20	6 ～ 16	4 ～ 20	4 ～ 6	6 ～ 20	6 ～ 8	3 ～ 10	3 ～ 20	4 ～ 20	3 ～ 12	3 ～ 12	4 ～ 6	6 ～ 20	3 ～ 20	4 ～ 20	4 ～ 20	4 ～ 16	6 ～ 20	4 ～ 12	6 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	4 ～ 12	4	4 ～ 6	4 ～ 6	6 ～ 16	6	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 6	6 ～ 16	6 ～ 12	4 ～ 12	6 ～ 20	6 ～ 12	12	8 ～ 10	4 ～ 6	4 ～ 6	4 ～ 6	6 ～ 12	6 ～ 12
Underneck length (ℓ1)(mm)	-	-	23 ～ 55	1 ～ 60	26 ～ 92	9 ～ 12	-	-	17 ～ 45	6 ～ 36	6 ～ 36	2 ～ 48	-	-	-	-	28 ～ 120	26 ～ 92	23 ～ 50	60 ～ 85	28 ～ 90	-	12.5	6 ～ 36	0.5 ～ 10	0.5 ～ 48	-	-	-	-	-	23 ～ 55	1 ～ 60	24 ～ 105	-	4 ～ 50	-	-	-	-	2 ～ 48	-	-	-	-
Machining Application	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Groove	-	Plane / Side / Curved surface	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Side / Curved surface / Groove / Inclined Cuts	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface
Coating	-	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	-	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Dia Coat	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	-	Non-Coated	TiAlN	Non-Coated	DLC	AlTiN	-	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	TiAlN	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	Non-Coated	TiAlN	TiAlN	For High Hardness (Silicon Group)
Type	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	Long-Neck Radius	Long-Neck Radius	Long-Neck Radius	radius	radius	radius	High-Feed Radius	Long-Neck Radius	radius	radius	radius	Long-Neck Radius	radius	radius	Long-Neck Radius	radius	Long-Neck Radius	radius	-	Long-Neck Radius	radius	radius	radius	Tapered neck radius	Tapered neck radius	radius	Long-Neck Radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	-	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	-	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
R Precision(μm)	0～-20	±0.02 ～ 10	±0.01 ～ ±0.02	-	±0.01	-	±0.02	0～-20	±0.01 ～ ±0.02	-	-	0.005 to -0.005 ～ 0.01～-0.01	-	0～-20	±0.02	±0.015	±0.015	±0.01	±0.01 ～ ±0.02	±0.02	±0.015	±0.02	-	-	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	-	-	±0.01	-	±0.02	±0.01 ～ ±0.02	±0.005 ～ ±0.01	±0.02	-	-	-0.032～-0.059 ～ -0.014～-0.028	-	-	-	-	0.02～-0.02	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	-

Loading...