Timing Belt Conveyor, Single Track, Center Driver, Pulley Dia. 20mm

Economical conveyor with a reasonable structure design, enabling localized production. Multiple types of models are available to meet customers' design requirements for different usage scenarios, providing better selection options.
E-CVSTR: This model uses a timing belt and is suitable for use in tight spaces.

Feature 1: The conveyor pulley pitch can be specified in 5 mm units.
Feature 2: Narrow body design, suitable for use in tight spaces.
Feature 3: The conveyor body uses an aluminum profile, achieving overall lightweight construction.
Feature 4: Single row narrow-width timing belt with knife-edge transition joint design, widely used for conveyance of small type products and supports precise positioning conveyance.

■ Material table

Part name	Material	Surface treatment
Profile	Aluminum	Electrophoresis
Motor cover	Aluminum	Painted baked paint
Pulley holder	Aluminum	Painted baked paint

■ Timing belt center distance - pulley center distance correspondence table

Model	Timing belt center distance B	Pulley center distance L
		L330 to 400	L405 to 500	L505 to 600	L605 to 900	L905 to 2000
E-CVSTR	10	●	●	●	●	●
	20	●	●	●	●	●

(1) In application, due to issues with the structural strength of the machine type and the amount of body deformation, please do not exceed the load specification or the length and width when selecting a model. Since the turning radius of the timing belt is limited, the timing belt tooth profile specification should be kept within T5.
(2) Do not disassemble or modify the conveyor by yourself to avoid causing performance defects.
(3) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(4) If operated in the opposite direction of the standard running direction, phenomena such as belt deviation, belt breakage, noise, jamming, and other abnormalities may occur. Please avoid using it in this way. (The standard transport direction is shown in the figure below)