Timing Belt Conveyor, Dual Track, Center Driver, Pulley Dia. 50mm
Brand :
MISUMI
Caution
Product Description
Economy series Belt Conveyor
Product Overview
Economy series conveyor, with a rational structural design and localized production. A variety of models are available to meet customers' design needs for different usage scenarios, providing better options.
E-CVGTP: Double-row synchronous belt center drive conveyor, uses a motor + synchronous belt drive method. The motor enables synchronous rotation of the two rows of synchronous belts, suitable for pallet transfer and assembly into equipment.
E-CVGTP: Double-row synchronous belt center drive conveyor, uses a motor + synchronous belt drive method. The motor enables synchronous rotation of the two rows of synchronous belts, suitable for pallet transfer and assembly into equipment.
Dimensional Drawing
E-CVGTP ■ Details of A Dimension
Motor Specification: 25W*
When L > 2000, 1 set (2 pieces) of belt support rollers is included.
Support Component Notes:
When L<1000, there are two sets of support components
When L is 1000 to 2000, there are three sets of support components
When L>2000, there are four sets of support components
When L ≤ 700, there is no countersunk hole at position F, and 4 nuts are pre-installed on one side inside the aluminum profile slot;
When L>700, a countersunk hole for nut insertion is reserved by default at position F, no additional machining required.
When selecting a speed control motor, the speed controller is not installed on the main unit, and no mounting bracket is included.
If you need a bracket for the speed controller, please use additional processing (SCB)
*Only the power affects the motor size. Please refer to the table below for dimension A. The external dimensions of the other components remain the same.
When L > 2000, 1 set (2 pieces) of belt support rollers is included.Support Component Notes:
When L<1000, there are two sets of support components
When L is 1000 to 2000, there are three sets of support components
When L>2000, there are four sets of support components
When L ≤ 700, there is no countersunk hole at position F, and 4 nuts are pre-installed on one side inside the aluminum profile slot;When L>700, a countersunk hole for nut insertion is reserved by default at position F, no additional machining required.
When selecting a speed control motor, the speed controller is not installed on the main unit, and no mounting bracket is included.If you need a bracket for the speed controller, please use additional processing (SCB)
*Only the power affects the motor size. Please refer to the table below for dimension A. The external dimensions of the other components remain the same.
Enlarged Profile View (Symmetrical Left and Right)
Standard Nut Fitting Table for Profile Slot: L Value (Center Distance Unit: mm)
Standard Nut Fitting Table for Profile Slot: L Value (Center Distance Unit: mm)
| L365 to 999 | L1000 to 1499 | L1500 or more | Position | Specifications | Configuration Type |
| 4PCS | 6PCS | 8PCS | X Section (Left/Right) | M3 (Hexagon) | Accessories |
| 4PCS | 6PCS | 8PCS | Y Section (Left/Right) | M6 (Square) | Accessories |
| Motor Power | Motor | Reduction Ratio | A | |
| Specifications | Manufacturer | |||
| 25W | Induction Motor / Variable Speed Motor | GPG | 3 to 18 | L118 |
| 25 to 180 | L130 | |||
| Induction Motor | JSCC | 3 to 18 | L119 | |
| 25 to 180 | L130 | |||
| Variable Speed Motor | 3 to 18 | L129 | ||
| 25 to 180 | L140 | |||
| 40W | Induction Motor / Variable Speed Motor | GPG | 3 to 18 | L148 |
| 25 to 180 | L166 | |||
| Induction Motor | JSCC | 3 to 18 | L152 | |
| 25 to 180 | L172 | |||
| Variable Speed Motor | 3 to 18 | L162 | ||
| 25 to 180 | L182 | |||
Material Table
| Part Name |  Material |  Surface Treatment |
| Frame | Aluminum | Electro Plating |
| Motor Cover Plate | Aluminum | Baked Paint |
| Pulley Housing | Aluminum | Baked Paint |
Specifications Overview
■ Flat Belt Width - Pulley Center Distance Correspondence Table
| Part number | Belt Width B | Pulley Center Distance L | |||||
| L365 to 500 | L505 to 600 | L605 to 800 | L805 to 900 | L905 to 1000 | L1005 to 3000 | ||
| E-CVGTP | 80 to 100 | ● | ● | ● | ● | ● | ● |
| 110 to 150 | ● | ● | ● | ● | ● | ● | |
| 160 to 200 | ● | ● | ● | ● | ● | ● | |
| 210 to 250 | ● | ● | ● | ● | ● | ● | |
| 260 to 300 | ● | ● | ● | ● | ● | ● | |
Alterations
 |  Part Number | - |  B | - |  L | - | Motor Selection | - |  Belt Specifications | - |  Motor Manufacturer Selection | - | Alterations | ||||
 Output Power | - |  Specifications | - |  Gear Head Reduction Ratio | |||||||||||||
| E-CVGTP | - | 100 | - | 1000 | - | 25 | - | SCM | - | 25 | - | H | - | G | - | MP200 | |
| Alterations | Code | Spec |
Drive Unit Position Specification | MP | The drive unit installation position can be changed. Ordering CodeMP 175 ≤ MP ≤ L-380 *Minimum L value is 555 Only the center drive type can be specified. |
Mounting Bracket for Speed Controller | SCB | Includes mounting bracket for speed controller. Ordering Code SCB |
Specification Table
Please order after selecting part number and parameters according to the selection steps 
to 
.
■Specification Table
If you need to use a stepper motor or servo motor for automatic control, you can choose the model without a motor and gear head.
When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.
When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.
For belts other than those listed above, please refer to the specification overview. Click 
here.
When the selected size 
L exceeds ( ) value, confirmation of shipping days may be required prior to placing an order or requesting a quotation due to transportation constraints.
to . | Part Number | - | B | - | L | - | Motor Selection | - | Belt Specifications | - | Motor Manufacturer Selection | ||||
| Output Power | - | Specifications | - | Gear Head Reduction Ratio | |||||||||||
| Without belt Without motor or gear head | E-CVGTP E-CVGTP E-CVGTP | - - - | 100 100 100 | - - - | 1000 1000 1000 | - - - | 25 25 25 | - - - | SCM INV NM | - - - | 25 30 NH | - - - | H J H | - - - | G G R |
■Specification Table
| Part Number | Shape | Model Features |
| E-CVGTP | Medium Load Side Guide Type | Tooth surface fabric for noise reduction, supports precision positioning and conveying |
| Part Number | B can be specified down to 10 mm increments | L Can be specified down to 5mm increments | Motor Selection | Belt Specifications (Material is generally PU) | Motor | ||
| Output Power (W) | Specifications | Gear Head Reduction Ratio | |||||
| E-CVGTP | 80 to 300 | 365 to 3000 (2440) | 25 40 | SCM (Single-phase 220V Variable Speed Motor) | 5 7.5 10 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180 | H(General-purpose · White toothed surface tape) S(For sliding · Green double-sided tape) D(Antistatic · Black double-sided tape) J(No belt) | G(GPG Motor) J(JSCC Motor) |
| INV (Three-Phase 220V Induction Motor) | |||||||
| NM(No Motor) | NH(No Gear Head) | R(No Motor · Gear Head) | |||||
If you need to use a stepper motor or servo motor for automatic control, you can choose the model without a motor and gear head.When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.For belts other than those listed above, please refer to the specification overview. Click 
here.When the selected size L exceeds ( ) value, confirmation of shipping days may be required prior to placing an order or requesting a quotation due to transportation constraints.■ Conveying Capacity
The chart shows the transport capacity under horizontal conditions.
Carrying capacity may vary depending on usage conditions.
When selecting a speed control motor, the transport capacity does not increase as the speed decreases.
The chart shows the transport capacity under horizontal conditions.Carrying capacity may vary depending on usage conditions.When selecting a speed control motor, the transport capacity does not increase as the speed decreases.■ Gear Head Reduction Ratio - Speed Correspondence Table
| Gear Head Reduction Ratio | Timing Belt Speed (m/min) | |
| SCM Speed Control Type | INV Inverter Type | |
| 5 | 29.0 to 48.3 | 60.1 |
| 7.5 | 19.3 to 32.2 | 40.1 |
| 10 | 14.5 to 24.2 | 30.1 |
| 12.5 | 11.6 to 19.3 | 24.1 |
| 15 | 9.7 to 16.1 | 20.0 |
| 18 | 8.1 to 13.4 | 16.7 |
| 25 | 5.8 to 9.7 | 12.0 |
| 30 | 4.8 to 8.1 | 10.0 |
| 36 | 4.0 to 6.7 | 8.4 |
| 50 | 2.9 to 4.8 | 6.0 |
| 60 | 2.4 to 4.0 | 5.0 |
| 75 | 1.9 to 3.2 | 4.0 |
| 90 | 1.6 to 2.7 | 3.3 |
| 100 | 1.4 to 2.4 | 3.0 |
| 120 | 1.2 to 2.0 | 2.5 |
| 150 | 1.0 to 1.6 | 2.0 |
| 180 | 0.8 to 1.3 | 1.7 |
Product Features
Feature 1: Simplifies belt replacement steps and improves maintainability.
Feature 2: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 3: Double-row narrow-width toothed belt, suitable for conveying jig tray products, supports precise positioning and conveying.
Feature 4: The timing belt center distance can be specified in 10 mm increments, and the pulley spacing can be specified in 5 mm increments.
Feature 2: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 3: Double-row narrow-width toothed belt, suitable for conveying jig tray products, supports precise positioning and conveying.
Feature 4: The timing belt center distance can be specified in 10 mm increments, and the pulley spacing can be specified in 5 mm increments.
Precautions
(1) When installing onto equipment, ensure the flatness of the aluminum profile.
(2) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(3) Due to different conveyor usage environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(4) In applications, due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting models.
(5) Even when the motor is operating normally, its surface temperature may sometimes exceed 70°C . Be sure to take precautions to avoid burns.
(6) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)
(2) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(3) Due to different conveyor usage environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(4) In applications, due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting models.
(5) Even when the motor is operating normally, its surface temperature may sometimes exceed 70°C . Be sure to take precautions to avoid burns.
(6) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)
Application Industries
| Equipment Production | Semiconductor | Lithium battery | ||
 |  |  | ||
| Food | Electronic & Electrical Appliances | Robotics | ||
 |  |  |
Related Products
| Economy Conveyor Synchronous Timing Belt Double-Row Head Drive Pulley Diameter 50 mm | Economy Conveyor, Single-Row Center Drive with Synchronous Timing Belt Pulley Diameter 19 mm 20 mm | Economy Conveyor with Synchronous Timing Belt, Double Row Center Drive Pulley Diameter 30 mm | ||
 |  |  | ||
| Representative Model: E-CVGTB | Representative Model: E-CVSTR | Representative Model: E-CVGTN |
Related Documents