Is the sensor shipped after installation?

The sensor components are shipped together with the main unit and need to be installed by the customer upon arrival.

Do actuators require regular maintenance?

Daily inspection and maintenance, and regular adding of grease are required, Grease dry-out will cause the product to rust, and dry friction between the guide slider and the steel balls at high speeds will cause wear and tear, significantly reducing product life.

Does the E-MCB series come with a motor?

The product only includes the body and does not come with a motor or driver. Customers need to choose a brand of motor they trust based on their actual needs.

Can the belt actuator be used vertically?

Vertical use of the Japanese specification belt actuator is prohibited.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(5 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-MCB10-L32-[100-2550/50]-[L,LD,LU,R,RD,RU]-M10-[C,D]

Effective Stroke Motor Position Motor Brand & Power Sensor Position type CAD Days to Ship

Specification/Dimensions

Effective Stroke(mm)
[100-2550/50mm Unit(s)]
Clear
Motor Position
- L Motor On Left Side
- LD Motor On Lower Left Side
- LU Motor On Upper Left Side
- R Motor On Right Side
- RD Motor On Lower Right Side
- RU Motor On Upper Right Side
Clear
Motor Brand & Power
- M10 Mitsubishi 100W
- P10 Panasonic 100W
- T10 Delta 100W
- Y10 Yaskawa 100W
- Z Prepared by Customer
Clear
Sensor Position
- C Motor Side
- D Motor Opposite Side
Clear
type
- E-MCB10
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

16 Day(s) or Less
Clear

Specify Alterations

Single Axis Robots E-MCB10 Precision Belt Drive, Fully-Sealed Type(For Clean Environment) (Part Number)

Name: Single Axis Robots E-MCB10 Precision Belt Drive, Fully-Sealed Type(For Clean Environment)
Brand: MISUMI
Availability: PreOrder

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

The product does not come with a driver, which must be purchased separately
The product comes with a sensor kit, which is unnecessary to select

Product Description

Economy series Aluminum Alloy Belt Drive Actuators E-MCB10 Series product only includes the main unit, not the motor and the driver, which must be purchased separately. The product comes with 3 NPN sensors, for which only mounting direction needs to be selected.

Product Overview of Single Axis Robots

Economy series Single Axis Robots are transmission devices integrating timing belts and guides, which are indispensable for the production process.
Up to ±0.04 or less.

Dimensional Drawing of Single Axis Robots

Components	Body	Guide	Timing Belt	Timing Pulley	Slide Block	Cover
Material	Aluminum Alloy	Carbon Steel	Urethane	45 Steel	Aluminum Alloy	Aluminum Alloy
Surface Treatment	Anodized	－	－	Nickel Plated	Anodized	Anodized

Specification Overview of Single Axis Robots

Specification Table of Single Axis Robots

Part Number	Lead (mm)	Stroke (50m increments)	Motor Position	Motor Brand	Motor Power	Sensor Position	Repetitive Positioning Accuracy (mm)	Max. Payload (kg)		Max. Speed (mm/sec)	Rated Thrust (N)
Type								Horizontal Use	Vertical Use
E-MCB10	32	100~2550	L (Motor On Left Side) R (Motor On Right Side) LD (Motor On Lower Left Side) RD (Motor On Lower Right Side) LU (Motor On Upper Left Side) RU (Motor On Upper Right Side)	M (Mitsubishi) P (Panasonic) Y (Yaskawa) T (Delta Electronics) Z (Prepared by Customer)	10 (100W)	C (External Motor Side) D (External Motor Opposite Side)	±0.04	10	－	1600	61

A motor is not included to this product and it must be purchased separately.
Single Axis Robots

This product cannot be used vertically.
Single Axis Robots

When Z is selected as the motor brand (prepared by customer), please provide the motor model and power when placing an order. (If necessary, provide the motor mountingdimensions)
Single Axis Robots

As the drawings are schematic diagrams, please confirm the detailed dimensions according to CAD data.
Single Axis Robots

Motor acceleration & deceleration setting 0.5 sec.

Part Number	Lead (mm)	Reducer	Max. Movement Speed (mm/sec)
			100	400	600	800	1000	1200	1400	2550
E-MCB10	32	Provided	1600

Values in the table are reference values calculated according to the critical speed and DN value of the belt.

Values in the table indicate the maximum safe speed for each stroke, as well as the maximum safe speed for standard strokes. Exceeding these speeds can increase beltwear, cause belt breakage and shorten the service life.

Accessories

Parameters Use of Single Axis Robots

Overhung Distance of Torque Center of Gravity

■ Sensing Line Wiring Diagram

■ List of Recommended Servo Motors
Recommended Motor

■ Motor Mounting Port
Motor Mounting Hole

Product Features of Single Axis Robots

1. Single Axis Robots, Simple design and installation
2. Single Axis Robots, High precision ±0.04
3. Single Axis Robots, Complete supporting accessories

Precautions of Single Axis Robots

■ Avoid using Single Axis Robots drive products in the following environments
① Dusty environment (especially metal powder)
② Environment with splashing water and oil
③ Near fire sources
④ Environment with excessive organic solutions and salt
⑤ Environment with direct sunlight and heat radiation
⑥ Environment subject to strong vibration and shock
⑦ Environment with corrosive gas, combustible gas

■ Single Axis Robots operating environment
Operating environment: normal temperature (no freezing, non-condensation)

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
E-MCB10-L32-[100-2550/50]-[L,LD,LU,R,RD,RU]-M10-[C,D]
E-MCB10-L32-[100-2550/50]-[L,LD,LU,R,RD,RU]-P10-[C,D]
E-MCB10-L32-[100-2550/50]-[L,LD,LU,R,RD,RU]-T10-[C,D]
E-MCB10-L32-[100-2550/50]-[L,LD,LU,R,RD,RU]-Y10-[C,D]
E-MCB10-L32-[100-2550/50]-[L,LD,LU,R,RD,RU]-Z-[C,D]

Price	Minimum Order Qty.	Days to Ship	Effective Stroke (mm)	Motor Position	Motor Brand & Power	Sensor Position
-	1 Piece(s)	16 Day(s)	100 ～ 2550	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	M10 Mitsubishi 100W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	16 Day(s)	100 ～ 2550	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	P10 Panasonic 100W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	16 Day(s)	100 ～ 2550	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	T10 Delta 100W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	16 Day(s)	100 ～ 2550	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	Y10 Yaskawa 100W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	16 Day(s)	100 ～ 2550	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	Z Prepared by Customer	C Motor Side / D Motor Opposite Side

Basic Information

Type	Slider	Drive Method	Belt	Main Body, Peripheral Components	Main Body
Positioning Repeatability(µm)	±40	Environmental Spec.	Clean Spec.	Cable	Not Provided
Number of Tables	1 pc.	Lead	32	Lead	32

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Is the sensor shipped after installation?: Answer: The sensor components are shipped together with the main unit and need to be installed by the customer upon arrival.
Question: Do actuators require regular maintenance?: Answer: Daily inspection and maintenance, and regular adding of grease are required, Grease dry-out will cause the product to rust, and dry friction between the guide slider and the steel balls at high speeds will cause wear and tear, significantly reducing product life.
Question: Does the E-MCB series come with a motor?: Answer: The product only includes the body and does not come with a motor or driver. Customers need to choose a brand of motor they trust based on their actual needs.
Question: Can the belt actuator be used vertically?: Answer: Vertical use of the Japanese specification belt actuator is prohibited.

Check other FAQ (1 items) Hide

Search by Category / Brand

Search by Category

How can we improve?