How long is the detection distance of the proximity sensor

The sensing distance of the proximity sensor varies depending on the size and material of the detection object. The sensing distance increases with the shape of the detection object. When the volume reaches a certain value, the sensing distance no longer increases with the shape of the detection object, and becomes a fixed value. Generally, the smallest detection object that reaches a fixed sensing distance is called a standard detection object. The standard detection object is generally a square made of iron (Fe360) with the thickness of 1mm, and the larger of the sensing surface diameter and 3 times the sensing distance is taken as the side length.

What needs to be paid attention to in the sensor selection?

In terms of parameters, it is mainly necessary to determine the main parameters such as product appearance and size, detection distance, operating voltage, output mode (NPN/PNP), output form (normally open/normally closed), and also to ensure the outlet form (direct outlet/connector type), cable length, bending resistance, frequency requirements, ambient temperature requirements, waterproof and dust-proof requirements (IP degree) and other parameters of the sensor.

What is the meaning of shielded and non-shielded for proximity sensors?

The shielded type sensor can be embedded in metal for use, while the non-shielded type cannot be embedded in metal, but its operating distance for detection is longer than the shielded type. Shielded type installation: The sensor is embedded in the metal base, and its effective sensing working surface is flush with the base surface. Non-shielded type installation: The sensor is not embedded in the metal base, and its effective sensing working surface must keep a certain space from its base. For proximity sensors of the same specifications, the non-shielded type can obtain the maximum sensing distance. The advantages of the sensor with shielded type installation are that they have better mechanical protection performance and stronger anti-interference ability than the sensor with unshielded type installation. The sensor with shielded type installation has approximately 69% of the acting distance compared to the sensor with non-shielded type installation.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 10/11/2024 to 3:30 (IST) 11/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(2 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-C04-N01

Detection Head Size Dimension Detection Distance L1 CAD Days to Ship

Specification/Dimensions

Detection Head Size Dimension(mm)
M4X0.5

M5X0.5
Clear
Detection Distance L1(mm)
0.6

1.0
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Compact Proximity Sensors, NPN Outputs (Part Number)

Name: Compact Proximity Sensors, NPN Outputs
Brand: MISUMI
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (3 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Compact Proximity Sensors, NPN Outputs
These Proximity Sensors are an economy item, The price is cheaper than the MISUMI standard product. They offer a wide variety of sizes to choose from.
[Feature]
● Shape : Cylindrical Shape with Screw and Shield
● Detection Head Size Dimension : M4x0.5 and M5X0.5
● Detection Distance (mm.): 0.6 and 1.0
● Output Method : NPN
● Wire Length (m.): 2
[Application]
It is an important component in the automation system ,its primary function is to detect objects without requiring any physical contact.

Economy Compact Proximity Sensors

Ultra-Compact DesignPrecise DetectionLow Power Consumption

- Cylindrical shape with a screw and shield. Available in multiple sizes.

- Accurate detection capabilities. Multiple detection distance options available.

- Fast response time. Switching frequency up to specified rate.

- Flexible power supply options. Operates on 10 to 30VDC.

- Efficient power usage. No-load current <10mA, voltage drop <1.5V. Energy-efficient operation reduces operational costs and extends the lifespan of the device.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Proximity Sensors, Proximity switches are a type of position switch designed for operation without direct mechanical contact with moving parts. When an object approaches the sensing surface and reaches the operation distance, the switch can work without any mechanical contact or pressure applied, thus driving the DC electrical appliance or providing control commands to the computer (plc). Proximity switches are switch-type sensors (i.e. contactless switches) that incorporate the features of travel switches and microswitches, and provide the sensing capability. They boast reliable operation, stable performance, fast frequency response, long service life, strong anti-interference capability, waterproofness, anti-vibration, corrosion resistance, etc.

Product Overview

Product Comparison

Model	MISUMI Standard Product PSMM4	Economy Series
		C-C04	C-C05
Shape	Thread Type　M4	Thread Type　M4	Thread Type　M5
Detection Distance	1mm	0.6mm	1.0mm
Output Format	NPN N.O. (Normally Open)	NPN N.O. (Normally Open)
Power Supply	DC 3-wire	DC 3-wire
Supply Voltage Range	10 to 30V　DC	10 to 30V　DC
Switch Hysteresis	10% or less of effective detection distance Sr	15% or less
Operating Ambient Temperature	-25 to +70 °C	-25 to +70 °C
Temperature Characteristics	Within ±15% (for operation at +23°C)	Within ±10% (for operation at +25°C)
Protection Rating	IP67	IP67
RoHS 10 Compliance	Compliant	Non-compliant

[ ! ] For other detailed specifications, see the standards table below.

Dimensional Drawing

C-C04-N01

C-C05-N01

Specification Table

Proximity Sensors Style	Diameter	Wire Length	Detection Distance	Output Method	Operation Mode
C-C04-N01	M4	2M	0.6mm	NPN Output	NO
C-C05-N01	M5		1.0mm

Proximity Sensors Types	DC 3-Wire Type (NPN)
	Including Cable 2M
	Operation Mode (NO)
Part Number	C-C04-N01	C-C05-N01
Detection Distance	0.6mm	1.0mm
Operating Voltage	10~30VDC
Allowable Pulse Voltage	<10%
No-load current	<10mA
Maximum load current	100mA	200mA
Leakage current	<0.01mA
Voltage drop	<1.5V
Switching frequency	2KHZ
Response time	0.1ms
Switching hysteresis	<15% (Sr)
Repetitive Accuracy	<1.0% (Sr)
Protection Rating	IP67
Operating Temperature	-25°C~+70°C
Temperature drift	<10% (Sr)
Short Circuit protection	YES
Overcurrent	120mA	220mA
Detection Surface Material	POM

Product Feature

Proximity Sensors DC 3-Wire Type NPN Output
Product Feature

Z_D: Surge Absorbing Zener Diode
T_r: NPN Output Transistor
D: Diode for Power Supply Reverse Connection Protection

Proximity Sensors DC 3-Wire Type PNP Output
Product Feature

Z_D: Surge Absorbing Zener Diode
T_r: PNP Output Transistor
D: Diode for Power Supply Reverse Connection Protection

Standard test equipment with assured quality.

Usage Method

Proximity Sensors Shielded
Usage Method

The shielded type has the magnetic flux concentrated in the front of the sensor, with the range of the inductive magnetic field toward the front of the proximity switch.

Non-shielded
Usage Method

The unshielded coil flux can increase the detection distance, but it is easy to be affected by surrounding metals because there is no object protection
Attention is required during installation

Proximity Sensors Mounting Method

Proximity Sensors Single shielded type
Usage Method

To prevent signal interference, the distance from the sensor surface to the metal detection object is ≥3 Sn (Sn is the sensor’s sensing distance), and the distance between two adjacent proximity sensors is ≥D (D is the sensor’s diameter).

Proximity Sensors Single non-shielded type
Usage Method

No protection is provided around the induction coil, so the distance to be guaranteed between the sensing surface and the mounting surface shall be Y (M5~M8: Y=6 mm, M12: Y=9 mm).
The distance between the sensing surface and the metal detection object shall be ≥3 Sn, and the distance between two adjacent proximity sensors shall be ≥2D (D is the sensor’s diameter).

Proximity Sensors Face-to-face mounting method
Usage Method

For face-to-face mounted sensors, the minimum distance between two sensing surfaces shall be ≥ 6 Sn.

Proximity Sensors Double-distance shielded type
Usage Method

Iron and steel X=0.2D
Other metal X=0.1D
*Thickness of detection object: 1 mm

Proximity Sensors Double-distance shielded type
Usage Method

Dimension D			Y (MM)
M8			12
M12			15

Precautions

Sensor Attenuation Coefficient

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
C-C04-N01
C-C05-N01

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Detection Head Size Dimension (mm)	Detection Distance L1 (mm)
	₹ 4,078.14	1 Piece(s)	Available	Same day	10	M4X0.5	0.6
	₹ 2,627.15	1 Piece(s)	Available	Same day	10	M5X0.5	1.0

Brand Introduction

MISUMI, the head office company, has been providing customers with various high-quality parts such as automation parts, mold parts, electronic parts, tool & consumables, etc. quickly and accurately since its establishment in Japan in 1963. By compiling product catalogs independently and establishing a marketing system for direct sales of products, a low-cost business operation mode has been created, and by making annual product plans according to customers' opinions and requirements, MISUMI brand-name products with high quality level have been continuously developed

Basic Information

Shape	Screw	Detected Object	Magnetic Metal	Shield	Shield
Protection Structure (IEC)	IP67	Power Supply and Output Specifications	3-wire type	Output Pattern	NPN Type (Normally Open)
External Shape	Cylindrical Type

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: How long is the detection distance of the proximity sensor: Answer: The sensing distance of the proximity sensor varies depending on the size and material of the detection object. The sensing distance increases with the shape of the detection object. When the volume reaches a certain value, the sensing distance no longer increases with the shape of the detection object, and becomes a fixed value. Generally, the smallest detection object that reaches a fixed sensing distance is called a standard detection object. The standard detection object is generally a square made of iron (Fe360) with the thickness of 1mm, and the larger of the sensing surface diameter and 3 times the sensing distance is taken as the side length.
Question: What needs to be paid attention to in the sensor selection?: Answer: In terms of parameters, it is mainly necessary to determine the main parameters such as product appearance and size, detection distance, operating voltage, output mode (NPN/PNP), output form (normally open/normally closed), and also to ensure the outlet form (direct outlet/connector type), cable length, bending resistance, frequency requirements, ambient temperature requirements, waterproof and dust-proof requirements (IP degree) and other parameters of the sensor.
Question: What is the meaning of shielded and non-shielded for proximity sensors?: Answer: The shielded type sensor can be embedded in metal for use, while the non-shielded type cannot be embedded in metal, but its operating distance for detection is longer than the shielded type. Shielded type installation: The sensor is embedded in the metal base, and its effective sensing working surface is flush with the base surface. Non-shielded type installation: The sensor is not embedded in the metal base, and its effective sensing working surface must keep a certain space from its base. For proximity sensors of the same specifications, the non-shielded type can obtain the maximum sensing distance. The advantages of the sensor with shielded type installation are that they have better mechanical protection performance and stronger anti-interference ability than the sensor with unshielded type installation. The sensor with shielded type installation has approximately 69% of the acting distance compared to the sensor with non-shielded type installation.

Search by Category / Brand

Search by Category

How can we improve?