For Sealable Type（Page2）

• 

  Large Surface Mounted Lock Handle, A-388N

  TAKIGEN

  [Features]
  · Please apply high-performance lubricant C-985 to ensure long-term use.
  · We recommend the application of a "Loosening prevention agent" on the screws for the stopper plate of this product in order to prevent looseness.
  · Please be aware that rotating the key more than necessary may damage the lock/key tip

  CAD ：

  2D

  Days to Ship:	6 Day(s) or more

• 

  Two Step Corner Handle, FA-635

  TAKIGEN

  [Features]
  · Once the lever is pulled, the door opens about 12 mm and then fully opens by pulling the lever again.
  · It is ideal for when you need to escape steam.
  · Heat resistant type with vinyl coating on the hand grip (up to 100° C).
  · It is possible to finely adjust the mounting position.
  · For both left hand and right hand use

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Sealing Handle FA-624

  TAKIGEN

  It is a functional and beautiful design, incorporating toughness and ease of use.
  Made from stainless steel for superior corrosion resistance. Left and right dual use type.
  
  [Features]
  · With the closed handle, you can create a powerful seal that has been developed for rooms with air conditioning systems. It is applicable to both inside and outside opening doors. (Spacer sold separately). The inner handle (FA-624H-2) is common for left and right.

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Latch Receiver for Airtight Lift Handle FA-681-S

  TAKIGEN

  [Features]
  · FA-681-1 / FA-681-T-1 You can close it with a single touch by using it in combination with a handle.
  · FA-681-S-1 is an indented type.
  · The latch is inconspicuous, and adjustment of up to 6 mm is possible.
  · FA-681-S-2 is a front facing type.
  · Easy installation and maintenance, adjustment of up to 10 mm is possible

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Seal Type Adjustable Handle A-209

  TAKIGEN

  [Features]
  · Ideal for doors which are required to be airtight.
  · Ideal for vibrating equipment.
  · Fine adjustment of grip position is possible with the adjusting screw.
  · Waterproof type (O ring used).
  · It is excellent in corrosion resistance due to its powder coating.
  Easy installation

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Airtight Cover Lock A-838

  TAKIGEN

  [Features]
  · Increases the shielding ability of the hook part, and minimizes sound leakage.
  · Flat type with few protrusions from the door surface.
  · You can tighten three points in combination with the interlocking unit.
  · A lock with a dust-proof shutter comes standard.
  · You can use it as an alternative to A-858 which is a cover lock for construction machine that is a product discontinued in the catalog

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Airtight, Small, Cover Lock A-839

  TAKIGEN

  [Features]
  · Improved the shielding property of the hook.
  · Keeps sound leakage to a minimum.
  · Flat type with few protrusions from the door surface.
  · Dust proof shutter lock included as standard

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Corner Handle for Sealing FA-611

  TAKIGEN

  [Features]
  · It is a side-mounted type sealed handle.
  · The semicircular claw meshes with the roller seat to draw-in and tightly close the door.
  · the roller seat can be adjusted 2 mm forward and backward from the reference position for tightening.
  · In addition to the included key, it is possible to lock with a padlock (recommended padlock C-551).
  · Left and right combination

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Corner Handle for Sealing, FA-615

  TAKIGEN

  [Features]
  · Heat-resistant type (up to 100°C) with a vinyl coating on the hand grip.
  · Can be used in high temperatures, such as with an oven

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Antibacterial Striker Plate for Airtight Safety Color Handle FA-662S

  TAKIGEN

  [Features]
  · Prevents growth of bacteria and mold.
  · Sustains the antimicrobial effect semipermanently.
  · The installation is FA-602 plate is compatible with FA-602S.
  · Refreshed design with cosmetic cover.
  · Since the mounting screws are hidden, the crime prevention is improved.
  · The meshing position can be adjusted back and forth by 3 mm using the long hole.
  · Loosen the screw of the plate and slide it to adjust the offset height.
  · An emergency escape device is attached to prevent accidents of being trapped inside.
  · When mounting the emergency escape device, use mounting part A and mounting part B, you can install it in two ways

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Safety Handle for Sealing, FA-601-F

  TAKIGEN

  [Features]
  · Even when locked, there is a special lever handle FA-601-F-H that's operation is a safety mechanism that can be open the door(FA-601-F-H sold separately).
  · For both left hand and right hand use

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Strike Plate FA-603S-P Safety Handle for Sealing, FA-603

  TAKIGEN

  [Features]
  · Compared to conventional resin rollers, this connects with the main latch on many points, which prevents latch disengagement due to pressure changes inside the cabinet.
  · Screws can be installed from the inside of the cabinet for anti-theft purposes
  · You can adjust the offset height

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Strike Plate FA-772S for Safety Handle for Sealing FA-772

  TAKIGEN

  [Features]
  · Prevents growth of bacteria and mold.
  · We focused on hygiene and ease of cleaning.
  · A safety escape mechanism is provided to prevent accidents by being trapped inside.
  · Because the mounting hole is long, you can adjust the engagement with the plate.
  · You can adjust the engagement with the handle.
  · FA-772S-1 is compatible for mounting with FA-602S-5

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Handle for Plastic Sealing, FA-110N

  TAKIGEN

  [Features]
  · Because it is made of resin, it is lightweight.
  · Easy to install on the front

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Handle for Airtightness FA-114

  TAKIGEN

  It can be strongly sealed. There are right opening and left opening types.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Handle for Sealing, FA-163-B

  TAKIGEN

  [Features]
  · FA-163-A is a surface mount type.
  · The door can be opened and closed with one touch.
  · A strong seal is possible because of the Cattle type (FA-163-C) and the lock TAK60 which is standard equipment for (FA-163-C) features new reversible key with dust proof shutter and excellent operation

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Magnet Handle for Sealing, FA-609

  TAKIGEN

  [Features]
  · The receiving tool is flat so it will not get in the way.
  · Strong magnets maintain a reliable seal.
  · You can operate with a light touch of your fingertips.
  · Both the main unit and the receiving unit are easy to adjust because the mounting holes are long.
  · Because there is no latch, it can be opened and closed smoothly without jarring.
  · Can be used in high temperatures such as with an oven.
  · Left and right combination

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Magnet Handle for Sealing FA-610

  TAKIGEN

  [Features]
  · A strong magnet ensures secure airtightness (suction power of 88.2 N).
  · You can operate with a light touch of your fingertips.
  · Tightening margin adjustment is possible for the plate.
  · Can be used in high temperatures such as with an oven.
  · For both left hand and right hand use

  CAD ：

  2D

  Days to Ship:	7 Day(s) or more

• 

  Sealed Interlocking Handle, FA-621

  TAKIGEN

  [Features]
  · Opening and closing of a large door with two locks can be preformed with a one-touch operation due to the connecting pipe.
  · There is a safety mechanism that can open the door from the inside of the cabinet with the interlocking safety device (FA-622) even in the case of locking with a padlock.
  · Left and right combination

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Small Cremone Lock A-375-A-X

  TAKIGEN

  [Features]
  · Easy to install surface attachment type.
  · Maintenance is very easy compared with digging type.
  · Upper and lower latches C-376 Strong seal with dead bolt.
  · Rainproof / dust proof type (uses locking cap/O ring).
  · For right or left use

  CAD ：

  2D

  Days to Ship:	51 Day(s) or more

• 

  Interlocking Safety Equipment FA-622

  TAKIGEN

  [Features]
  · When you press the manual lever, you can open it from inside of the cabinet using the connecting rod set on the interlocking lever.
  · It can be opened reliably, even when locked.
  · Left and right combination

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  L-shaped Inner Handle A-394-H

  TAKIGEN

  Days to Ship:	15 Day(s) or more

Loading...