• You can add up to 6 items per a category to the compare list. Compare

  

  Join Slide SPS Series

  MIYOSHI KIKAI

  SPS (spline shaft), SPA / SPO (spline sleeve) is made of: S-45C material. Use on the sliding part during rotation.

  CAD ：

  2D

  From: ₹ 1,874.40
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Universal Joints - Set Pin

  MISUMI

  [Features]·This is a coupling that allows the joining angle to be changed freely.

  • Volume Discount

  CAD ：

  2D / 3D

  From: ₹ 448.04
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Universal Joints - Set Keyway / Tapped

  MISUMI

  [Features]No pin hole machining is required on the shaft, but only keyway machining is required to tighten.

  • Volume Discount

  CAD ：

  2D / 3D

  From: ₹ 448.04
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Wear-Resistant HJ Series

  MIYOSHI KIKAI

  [Features]
  · With total hardening treatment for increased fatigue strength.
  · Additional machining cannot be performed on the hardened product.
  · To extend life, boots and oil pack should be used.
  · When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
  · With key groove processing, the strong pins and joint pins are not included.

  From: ₹ 2,984.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Encoder type coupling - set screw type- [SFC]

  SUNGIL

  [Features]
  · Can simultaneously absorb large allowable deviation angles, eccentricity and end play.
  · Impacts and vibration completely absorbed.
  · Oil-free, low moment of inertia.

  From: ₹ 1,457.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Strong Type BD Series

  MIYOSHI KIKAI

  [Features]
  · High torque normal use.
  · Material: S45C
  · Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
  · To extend life, boots and oil pack should be used.
  · When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, spring pin is not included.

  From: ₹ 4,400.09
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flexible Coupling (SFC Series)

  SUNGIL

  CAD ：

  2D / 3D

  From: ₹ 1,457.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Shaft Type, Bearing Type, KL Type, KF Type, KFD Type

  MIYOSHI KIKAI

  [Features]·Universal joint for light torque and high speed. ·Flange is not included.

  CAD ：

  2D

  From: ₹ 15,133.82
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Join Slide GX Series

  MIYOSHI KIKAI

  GXS(Hex sanding shaft) is made of S-45C. GXA/GXO (Hex hole sleeve) is made of: STKM-13. Hex shaft / Sleeve can be cut at any position.
  
  [Features]
  · The hex shaft and sleeve can be cut at any position.
  · Cannot be used in sliding part while rotating.
  · When using as a slide unit, the NX slide unit should also be considered.

  CAD ：

  2D

  From: ₹ 1,909.82
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Shaft Fitting, Correctable, UA-C Series

  SAKAI MANUFACTURING

  Ideal for high precision and highly responsive control.
  
  [Features]
  · With high performance and double bolt clamp specification, suitable for high precision, highly responsive control.

  CAD ：

  2D / 3D

  From: ₹ 3,205.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Universal Joint Coupling - Clamping Long Type -

  SUNGIL

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.

  CAD ：

  2D / 3D

  From: ₹ 2,943.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Miniature Model, M Model

  MIYOSHI KIKAI

  High precision for small diameter use. In order to improve wear resistance, has been treated with S45C nitride composite processing.

  From: ₹ 3,221.02
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Joint Coupling (SCJ Series)

  SUNGIL

  CAD ：

  2D / 3D

  From: ₹ 2,384.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Bearing Model, K Model

  MIYOSHI KIKAI

  [Features]
  ·Grease-filled needle bearings are used, making them suitable for high-speed rotation.
  ·The attached spring pin hole should be machined at the same time as the shaft at the l/2 position.
  ·K-20 and above have a grease nipple.
  ·When using boots, please use type B or type H.
  ·If the shaft hole shape is B or T, please specify the new JIS key or the old JIS key.
  ·With keyway processing, the spring pins are not included.
  [Applications]
  ·For high speed rotation.

  From: ₹ 9,923.38
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Universal Joint Coupling - Clamping Type - [SCJA]

  SUNGIL

  Clamping type product suitable for use in cases where shaft and shaft are located away from each other, or when the angle of the shaft is great. SUNGIL Inc. is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection.

  From: ₹ 2,571.04
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Paraflex CPE· CPU Model

  MIKI PULLEY

  High rigidity with high precision pin and dry metal to minimize backlash.
  
  [Features]
  · The rigidity of each component is very high, and backlash extremely small due to high precision pin and dry metal.
  · As it is universal type, the shaft reaction force due to installation error is extremely small.
  · With damping effect due to sliding friction surface of pin and dry metal.

  CAD ：

  2D

  From: ₹ 4,248.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  Standard Type, Precision Type H Series

  MIYOSHI KIKAI

  [Features]
  ·The pin is dry lubricated to improve abrasion resistance.
  ·Please use boots and oil packs to extend the life of the joints.
  ·For B or T, please specify the new JIS key or the old JIS key.
  ·With keyway processing, spring pin is not included.

  From: ₹ 3,977.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Wear-Resistant HJD Type

  MIYOSHI KIKAI

  [Features]
  · With total hardening treatment for increased fatigue strength.
  · Additional machining cannot be performed on the hardened product.
  · When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
  · With key groove processing, the strong pins and joint pins are not included.

  From: ₹ 5,385.00
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing)

  SHOWA SPRING

  OILES metal (bushing) is used for the bearing.
  Basically for manual rotation (remote control).
  [Features]
  ・ The structure other than the inner shaft is exactly the same as the DS type, so its cost is low and it is durable
  ・ Allowable transmission torque drops only to 80% even when rotating counterclockwise

  Days to Ship: 16 Day(s) or more

  16 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Precision S Model

  MIYOSHI KIKAI

  Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
  · To extend life, boots and oil pack should be used.
  · When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, the spring pins are not included.

  From: ₹ 4,479.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Reinforced B-GX Type of Hexagonal Shaft Joint

  MIYOSHI KIKAI

  [Features]
  · Shaft can be freely cut at any point.
  · Expansion / contraction range is large for broad range of installations.

  From: ₹ 13,963.24
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Corrosion Resistant HS Series/BS Series/HSS Series

  MIYOSHI KIKAI

  [Features]
  · Dry lubrication treatment for wear resistance (HS-16 and higher)
  · Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.
  · When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, spring pin is not attached.

  From: ₹ 4,085.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft type spline, shaft type joint, stainless type HS-P

  MIYOSHI KIKAI

  [Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SUS304.

  From: ₹ 28,013.22
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Universal Joint, MC Series

  MIGHTY

  [Features]
  ·Zero backlash
  ·Angle absorption of 45 degrees for single and 90 degrees for double
  ·Electrical insulation, non-magnetic
  ·Lightweight and does not require lubrication
  ·Excellent durability and chemical resistance
  [Applications]
  ·Computers and Peripherals, Instrumentation Equipment, Controllers, Control Systems
  ·Information equipment, communication equipment, switching systems
  ·audio equipment, audiovisual equipment
  ·Office equipment, copiers, medical equipment, precision equipment, printing machines, textile machines, vending machines
  ·Air conditioners, environmental equipment, educational models, leisure models, etc.

  CAD ：

  2D

  From: ₹ 1,091.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large plastic universal joint MD series

  MIGHTY

  [Features]
  ·Zero backlash
  ·Electrical insulation, non-magnetic
  ·Oil free
  ·Resistant to pushing and pulling
  ·Light weight, low inertia
  [Applications]
  ·Control systems, push-pull transmission mechanisms, audio equipment, audio-visual equipment, textile machinery, instrumentation equipment, environmental equipment, equipment for outdoor use

  CAD ：

  2D

  From: ₹ 4,891.82
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Universal Joint Coupling -Set Screw Type- [SCJ]

  SUNGIL

  Clamping type product suitable for use in cases where shaft and shaft are located away from each other, or when the angle of the shaft is great. SUNGIL Inc. is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.

  CAD ：

  2D / 3D

  From: ₹ 2,384.85
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Miniature Model MM Model

  MIYOSHI KIKAI

  High precision for ultra-small diameter use. 3 types of material available: SK-4 with nitriding composite treatment, SUS304 & SUS316.

  From: ₹ 4,708.13
  Days to Ship: 18 Day(s) or more

  18 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type with shaft, joint with hexagonal shaft, precision type, H-GX type

  MIYOSHI KIKAI

  The amount of expansion and contraction that can be freely cut at any part of the intermediate shaft is large, and the mounting range is wide.

  From: ₹ 18,483.27
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft type spline, shaft joint, precise type H-P

  MIYOSHI KIKAI

  Please refer to P.6 "Requests for Ordering" in the catalog before placing an order. Please refer to "Joint Boots" on pages 24-25 of the catalog.

  From: ₹ 14,482.75
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flexible Shaft Compact Design SF Type (Flexible Shaft)

  SHOWA SPRING

  Low power / high speed can be changed for transmission freely in the desired direction.

  From: ₹ 2,412.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Power Type B Series

  MIYOSHI KIKAI

  [Features]
  · Holes for spring pins included can be machined in the l/2 position simultaneously with the shaft.
  · To extend life, boots and oil pack should be used.
  · When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, the spring pins are not included.

  From: ₹ 2,264.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Non Magnetic Corrosion Resistant Type - BR Type

  MIYOSHI KIKAI

  This product is non-magnetic and has excellent corrosion resistance. [Materials]·Bronze BC6.

  From: ₹ 5,063.09
  Days to Ship: 18 Day(s) or more

  18 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model

  MIYOSHI KIKAI

  [Features]
  ·Joints with hexagonal shafts and intermediate shafts can be cut freely
  ·Expansion / contraction range is large for broad range of installations.

  From: ₹ 16,742.00
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bearing K-GX Type of Hexagonal Shaft Joint

  MIYOSHI KIKAI

  [Features]
  · Comprises 2 standard joints and joint slide (GXS, GXA).
  · Joint and join slide are set with spring pin.
  · When shaft machining (keyway, tapping hole, etc.), after making the mating mark, remove the spring pin, and release the joint and joint slide.
  · After machining, be sure to set back to the original position according to mating mark. (HJ-GX uses a joint pin instead of a spring pin.)
  · When setting, please ensure symmetry of left / right joint assembly E yoke and F yoke.
  · Please note, if set incorrectly, output wheel speed will become uneven.

  From: ₹ 34,527.20
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint Power Type With Spline Shaft B-PS Series

  MIYOSHI KIKAI

  [Features]
  · P series are short-lead, easy order type.
  · Comprising of 2 standard joints (SPS, and join slide SPA).
  · In the case of the standard product, since the joint and the join slide are not set on delivery, once the full length dimension is decided, use the spring pin provided to set for use (HJ-P uses joint pin instead of spring pin ).
  · When setting, please ensure symmetry of left / right joint assembly.
  · Please note, if set incorrectly, output shaft speed will become uneven.

  From: ₹ 35,686.29
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft attached type Joint with spline shaft Bearing type K-P model

  MIYOSHI KIKAI

  Miyoshi Kikai universal joint shaft type spline shaft joint bearing type KP type.

  From: ₹ 32,854.16
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Corrosion Resistant Type HSD/BSD

  MIYOSHI KIKAI

  [Features]
  · Dry lubrication treatment for wear resistance (HSD-16 and higher)
  · Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.
  · When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, spring pin is not included.

  From: ₹ 7,956.42
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type with shaft, joint with hexagonal shaft, precision type, S-GX type

  MIYOSHI KIKAI

  [Features]
  ·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
  ·The amount of expansion and contraction is large and the mounting range is wide.

  From: ₹ 21,813.36
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  With Shaft Model Joints with Spline Shaft Accurate Model S-P Model

  MIYOSHI KIKAI

  [Features]
  ·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
  ·The amount of expansion and contraction is large and the mounting range is wide.

  From: ₹ 15,495.75
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic / Universal / Joint MCM Series

  MIGHTY

  [Features]
  ·Zero backlash
  ·Angle absorption of 45 degrees for single and 90 degrees for double
  ·Electrical insulation, non-magnetic
  ·Lightweight and does not require lubrication
  ·Excellent durability and chemical resistance
  [Applications]
  ·Computers and Peripherals, Instrumentation Equipment, Controllers, Control Systems
  ·Information equipment, communication equipment, switching systems
  ·audio equipment, audiovisual equipment
  ·Office equipment, copiers, medical equipment, precision equipment, printing machines, textile machines, vending machines
  ·Air conditioners, environmental equipment, educational models, leisure models, etc.

  CAD ：

  2D

  From: ₹ 3,313.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Precision Type D Model

  MIYOSHI KIKAI

  [Features]
  · Spring pins included can be machined in the l/2 position simultaneously with the shaft.
  · To extend life, boots and oil pack should be used.
  · When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, spring pin is not included.

  From: ₹ 12,548.00
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Bearing Model, KD Model

  MIYOSHI KIKAI

  [Features]
  ·Uses grease-encapsulated needle bearings, making it suitable for high-speed rotation.

  From: ₹ 25,137.16
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint Slide SPSS Series

  MIYOSHI KIKAI

  SPSS (spline shaft), SPAS / SPOS (spline sleeve) is made of: S-45C material.
  
  [Features]
  · Please note the effective spline size for sleeve and shaft cutting.
  · Use on the sliding part during rotation.

  CAD ：

  2D

  From: ₹ 5,604.00
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wheel attached type spline wheel attached joint strong type B-P type

  MIYOSHI KIKAI

  [Features]
  ·Joints with hexagonal shafts and intermediate shafts can be cut freely
  ·Expansion / contraction range is large for broad range of installations.

  From: ₹ 11,024.82
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model

  MIYOSHI KIKAI

  [Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SCM415.

  From: ₹ 12,496.42
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Shaft Bore Dia. (machined) D1(Ø)
Allowable Torque Range(N•m)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Features
Application
Type
Max. Rotational Speed Range(r/min)
Body Material
Allowable Torque(N•m)
Max. Rotational Speed(r/min)
Allowable Lateral Misalignment Range(mm)
Allowable Lateral Misalignment(mm)
Allowable Angular Misalignment(deg)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MIYOSHI KIKAI	MISUMI	MISUMI	MIYOSHI KIKAI	SUNGIL	MIYOSHI KIKAI	SUNGIL	MIYOSHI KIKAI	MIYOSHI KIKAI	SAKAI MANUFACTURING	SUNGIL	MIYOSHI KIKAI	SUNGIL	MIYOSHI KIKAI	SUNGIL	MIKI PULLEY	MIYOSHI KIKAI	MIYOSHI KIKAI	SHOWA SPRING	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIGHTY	MIGHTY	SUNGIL	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SHOWA SPRING	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIGHTY	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI
Product Series	Join Slide SPS Series	Universal Joints - Set Pin	Universal Joints - Set Keyway / Tapped	Standard Type Wear-Resistant HJ Series	Encoder type coupling - set screw type- [SFC]	Standard Type, Strong Type BD Series	Flexible Coupling (SFC Series)	Shaft Type, Bearing Type, KL Type, KF Type, KFD Type	Join Slide GX Series	Precision Shaft Fitting, Correctable, UA-C Series	Universal Joint Coupling - Clamping Long Type -	Standard Miniature Model, M Model	Cross Joint Coupling (SCJ Series)	Standard Bearing Model, K Model	Universal Joint Coupling - Clamping Type - [SCJA]	Paraflex CPE· CPU Model	Standard Type, Precision Type H Series	Standard Type Wear-Resistant HJD Type	Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing)	Standard Type Precision S Model	Reinforced B-GX Type of Hexagonal Shaft Joint	Standard Type Corrosion Resistant HS Series/BS Series/HSS Series	Shaft type spline, shaft type joint, stainless type HS-P	Plastic Universal Joint, MC Series	Large plastic universal joint MD series	Universal Joint Coupling -Set Screw Type- [SCJ]	Standard Miniature Model MM Model	Type with shaft, joint with hexagonal shaft, precision type, H-GX type	Shaft type spline, shaft joint, precise type H-P	Flexible Shaft Compact Design SF Type (Flexible Shaft)	Standard Type, Power Type B Series	Standard Type, Non Magnetic Corrosion Resistant Type - BR Type	Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model	Bearing K-GX Type of Hexagonal Shaft Joint	Joint Power Type With Spline Shaft B-PS Series	Shaft attached type Joint with spline shaft Bearing type K-P model	Standard Corrosion Resistant Type HSD/BSD	Type with shaft, joint with hexagonal shaft, precision type, S-GX type	With Shaft Model Joints with Spline Shaft Accurate Model S-P Model	Plastic / Universal / Joint MCM Series	Standard Precision Type D Model	Standard Bearing Model, KD Model	Joint Slide SPSS Series	Wheel attached type spline wheel attached joint strong type B-P type	With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model
CAD	2D	2D / 3D	2D / 3D				2D / 3D	2D	2D	2D / 3D	2D / 3D		2D / 3D			2D								2D	2D	2D / 3D														2D			2D
From	₹ 1,874.40	₹ 448.04	₹ 448.04	₹ 2,984.80	₹ 1,457.76	₹ 4,400.09	₹ 1,457.76	₹ 15,133.82	₹ 1,909.82	₹ 3,205.53	₹ 2,943.75	₹ 3,221.02	₹ 2,384.85	₹ 9,923.38	₹ 2,571.04	₹ 4,248.89	₹ 3,977.29	₹ 5,385.00		₹ 4,479.35	₹ 13,963.24	₹ 4,085.78	₹ 28,013.22	₹ 1,091.29	₹ 4,891.82	₹ 2,384.85	₹ 4,708.13	₹ 18,483.27	₹ 14,482.75	₹ 2,412.55	₹ 2,264.20	₹ 5,063.09	₹ 16,742.00	₹ 34,527.20	₹ 35,686.29	₹ 32,854.16	₹ 7,956.42	₹ 21,813.36	₹ 15,495.75	₹ 3,313.05	₹ 12,548.00	₹ 25,137.16	₹ 5,604.00	₹ 11,024.82	₹ 12,496.42
Days to Ship	8 Day(s) or more	Same day or more	Same day or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	12 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	16 Day(s) or more	5 Day(s) or more	11 Day(s) or more	5 Day(s) or more	11 Day(s) or more	5 Day(s) or more	9 Day(s) or more	8 Day(s) or more	18 Day(s) or more	11 Day(s) or more	11 Day(s) or more	5 Day(s) or more	5 Day(s) or more	18 Day(s) or more	8 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more	8 Day(s) or more	11 Day(s) or more	11 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	11 Day(s) or more	11 Day(s) or more
Shaft Bore Dia. (machined) D1(Ø)	5 ～ 38	6 ～ 30	8 ～ 30	6 ～ 30	4 ～ 16	6 ～ 60	4 ～ 16	-	6 ～ 30	3 ～ 20	3 ～ 15	2 ～ 5.5	3 ～ 15	10 ～ 30	3 ～ 15	3 ～ 22	6 ～ 30	6 ～ 30	-	6 ～ 60	6 ～ 30	6 ～ 60	6 ～ 20	3 ～ 10	8 ～ 20	3 ～ 15	1 ～ 1.5	6 ～ 30	6 ～ 30	-	6 ～ 60	6	6 ～ 30	10 ～ 30	20 ～ 60	10 ～ 30	6 ～ 30	8 ～ 30	6 ～ 30	2 ～ 10	6 ～ 60	10 ～ 30	6 ～ 25	6 ～ 30	6 ～ 30
Allowable Torque Range(N•m)	-	5.01~10.00 ～ 100 < 500	20.01~50.00 ～ 50.01~100.00	-	1.01~3.00	-	1.01~3.00	-	-	0.05~1.00 ～ 10.01~20.00	0.05~1.00 ～ 3.01~5.00	-	0.05~1.00 ～ 3.01~5.00	-	0.05~1.00 ～ 3.01~5.00	0.05~1.00 ～ 20.01~50.00	-	-	1.01~3.00	-	-	-	-	0.05~1.00 ～ 1.01~3.00	1.01~3.00 ～ 10.01~20.00	0.05~1.00 ～ 3.01~5.00	-	-	-	0.05~1.00 ～ 1.01~3.00	-	-	-	-	-	-	-	-	-	0.05~1.00 ～ 1.01~3.00	-	-	-	-	-
Shaft Bore Dia. (machined) D2(Ø)	-	-	-	-	4 ～ 16	-	4 ～ 16	-	-	3 ～ 20	3 ～ 15	-	3 ～ 15	-	3 ～ 15	3 ～ 22	-	-	-	-	-	-	-	3 ～ 10	8 ～ 20	3 ～ 15	-	-	-	-	-	-	-	-	-	-	-	-	-	2 ～ 10	-	-	-	-	-
Outer Dia. A(Ø)	5 ～ 35	12 ～ 51	19 ～ 36	12 ～ 51	29 ～ 54	12 ～ 120	29 ～ 54	36 ～ 118	11 ～ 54	15 ～ 55	15 ～ 40	6 ～ 10	15 ～ 40	20 ～ 60	15 ～ 40	19 ～ 46	12.5 ～ 57	12 ～ 51	32	16 ～ 115	12 ～ 60	12.5 ～ 120	12.5 ～ 40	7.1 ～ 17.5	23 ～ 36.5	15 ～ 40	2 ～ 3	12.5 ～ 57	12.5 ～ 57	-	12 ～ 120	16	12 ～ 51	20 ～ 60	40 ～ 120	20 ～ 60	12.5 ～ 60	18 ～ 58	16 ～ 58	7.1 ～ 17.5	16 ～ 115	20 ～ 60	6 ～ 22	12 ～ 60	12 ～ 51
Overall Length W(mm)	-	31 ～ 139	42 ～ 139	31 ～ 122	28 ～ 58	75 ～ 485	28 ～ 58	72 ～ 326	-	18 ～ 58	24.2 ～ 51	15 ～ 30	22.4 ～ 51	62 ～ 178	22.4 ～ 45.6	19.4 ～ 54	40 ～ 165	49.5 ～ 195	-	34 ～ 220	162~270 ～ 553~711	40 ～ 300	148.5~252 ～ 335~842	19.1 ～ 75.5	62 ～ 86	22.4 ～ 45.6	9 ～ 12	131~250 ～ 517~685	148.5~252 ～ 530~1164	150 ～ 300	50 ～ 300	40	105~232 ～ 399~599	194~309 ～ 546~711	324~806 ～ 760~1312	219~450 ～ 556~1188.5	65 ～ 275	132~245 ～ 397~599	136.5~244 ～ 444~1095	27.2 ～ 89.8	50 ～ 340	96 ～ 275	-	168.5~266.5 ～ 556~1185	130.5~238 ～ 444~1094
Features	-	-	-	-	-	High Torque	-	-	-	High Torsional Rigidity ～ Low Moment of Inertia	Heat Resistant ～ Small	Small	Heat Resistant ～ Small	-	-	High Accuracy ～ Small	High Accuracy ～ High Durability	-	High Accuracy ～ Vibration Insulation	High Accuracy ～ Small	High Torque	-	-	High Accuracy ～ No Backlash	High Accuracy ～ Small	Heat Resistant ～ Small	Small	High Accuracy ～ High Durability	High Accuracy ～ High Durability	-	High Torque	-	-	-	High Torque	-	-	High Accuracy ～ Small	High Accuracy ～ Small	High Accuracy ～ No Backlash	High Accuracy ～ Small	-	-	High Torque	-
Application	Standard	Standard	Standard	Standard	-	Standard	-	Standard	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Servo Motor	Standard	Servo Motor	Standard	-	Standard / Servo Motor / Stepping Motor	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard / Servo Motor / Stepping Motor / Encoder	Servo Motor	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard	Standard	Standard	Standard	Standard
Type	Shaft Type	Others / Standard Type	Others / Standard Type	Standard Type	-	Standard Type	-	Shaft Type	Shaft Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	-	Standard Type	Standard Type	Standard Type	Flexible Type	Standard Type	Shaft Type	Standard Type	Shaft Type	Standard Type	Standard Type	Standard Type	Standard Type	Shaft Type	Shaft Type	Flexible Type	Standard Type	Standard Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Standard Type	Shaft Type	Shaft Type	Standard Type	Standard Type	Standard Type	Shaft Type	Shaft Type	Shaft Type
Max. Rotational Speed Range(r/min)	-	-	-	301~1000 ～ 1001~2000	2001~4000	100~ 300 ～ 1001~2000	2001~4000	-	-	4001~10000	2001~4000 ～ 10001~78000	301~1000	2001~4000 ～ 10001~78000	301~1000 ～ 2001~4000	2001~4000 ～ 4001~10000	2001~4000 ～ 4001~10000	301~1000 ～ 1001~2000	301~1000 ～ 1001~2000	< 100	100~ 300 ～ 2001~4000	-	< 100 ～ 301~1000	-	4001~10000	-	2001~4000 ～ 10001~78000	-	-	-	-	100~ 300 ～ 1001~2000	-	-	-	-	-	100~ 300 ～ 301~1000	-	-	4001~10000	100~ 300 ～ 1001~2000	301~1000 ～ 2001~4000	-	-	-
Body Material	Steel	Steel	Steel	Steel	Steel	Steel	Steel	-	Steel	Aluminum	Aluminum ～ Aluminum Alloy	Steel	Aluminum ～ Aluminum Alloy	Steel	Aluminum Alloy	Aluminum	Steel	Steel	Steel	Steel	Steel	Stainless Steel	Stainless Steel	Plastic	Plastic	Aluminum ～ Aluminum Alloy	Stainless Steel ～ Steel	Steel	Steel	Steel	Steel	Alloy	Steel	Steel	Steel	Steel	Stainless Steel	Steel	Steel	Plastic	Steel	Steel	Stainless Steel	Steel	Steel
Allowable Torque(N•m)	-	5.3 ～ 495	20.1 ～ 175	-	0.12 ～ 1.5	-	0.12 ～ 1.5	-	-	0.25 ～ 20	0.25 ～ 5	-	0.25 ～ 5	-	0.25 ～ 5	0.4 ～ 25	-	-	2.94	-	-	-	-	0.08 ～ 1.6	2.8 ～ 10.7	0.25 ～ 5	-	-	-	0.392 ～ 1.862	-	-	-	-	-	-	-	-	-	0.08 ～ 1.6	-	-	-	-	-
Max. Rotational Speed(r/min)	-	-	-	500 ～ 1800	3000	160 ～ 1300	3000	-	-	6000	3500 ～ 18000	700 ～ 1000	3500 ～ 21000	950 ～ 2500	4000 ～ 6000	3000 ～ 6000	510 ～ 2000	380 ～ 1400	100	280 ～ 2100	-	90 ～ 800	-	10000	-	4000 ～ 21000	-	-	-	-	220 ～ 1700	-	-	-	-	-	150 ～ 640	-	-	10000	200 ～ 1500	730 ～ 2200	-	-	-
Allowable Lateral Misalignment Range(mm)	-	-	-	-	1.1~3.0	-	1.1~3.0	-	-	0.02~0.2	0.21~0.40	-	0.21~0.40 ～ 0.41~1.0	-	0.21~0.40 ～ 0.41~1.0	0.02~0.2 ～ 0.41~1.0	-	-	-	-	-	-	-	5.1~100	-	0.21~0.40 ～ 0.41~1.0	-	-	-	-	-	-	-	-	-	-	-	-	-	5.1~100	-	-	-	-	-
Allowable Lateral Misalignment(mm)	-	-	-	-	2 ～ 3	-	2 ～ 3	-	-	0.2	0.3 ～ 0.5	-	0.3 ～ 0.5	-	0.3 ～ 0.5	0.2 ～ 0.5	-	-	4,520	-	-	-	-	5.6 ～ 15.5	-	0.3 ～ 0.5	-	-	-	-	-	-	-	-	-	-	-	-	-	5.6 ～ 15.5	-	-	-	-	-
Allowable Angular Misalignment(deg)	-	-	-	-	10 ～ 12	-	10 ～ 12	-	-	1	7	-	3 ～ 7	-	3	1 ～ 4	-	-	180	-	-	-	-	45 ～ 90	40	3	-	-	-	-	-	-	-	-	-	-	-	-	-	45 ～ 90	-	-	-	-	-

Loading...