OSG Screw-Hole-Related Tools（work material：Low-Carbon Steel (carbon alloy less than 0.25%)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Model A Tap Series, Spiral Tap A-SFT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10-32UNF ～ M56	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.25 ～ 5.5	Powder high-speed steel / Vanadium High-Speed Steel	Spiral Tap	For blind hole	1.5P ～ 2.5P	Other	Available	34 ～ 250

  From: ₹ 1,764.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Model A Tap Series, Pointed Tap A-POT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10-32UNF ～ M24	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.25 ～ 3	Powder high-speed steel	Point tap	For through hole	5P	Other	Available	34 ～ 120

  From: ₹ 2,448.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M30	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 3.5	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	100 ～ 200

  From: ₹ 2,930.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap Series TiN Coating TIN-POT

  OSG

  Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M42	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.3 ～ 4.5	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	34 ～ 175

  From: ₹ 1,619.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.2UN ～ M6	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.25 ～ 56	Powder high-speed steel	Roll tap	For blind hole	1P	TiCN	Available	30 ～ 62

  From: ₹ 2,154.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless Tap (X Performer)_S-XPF

  OSG

  There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
  * M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M45	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.2 ～ 4.5	Powder high-speed steel / Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiCN	Available	30 ～ 220

  From: ₹ 2,505.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Tap with Long Shank_A-LT-POT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.25 ～ 3	Powder high-speed steel	Point tap	For through hole	5P	Other	Available	80 ～ 200

  From: ₹ 2,525.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.2UN ～ M12	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.25 ～ 56	Powder high-speed steel	Roll tap	For blind hole	2P ～ 4P	TiCN	Available	30 ～ 82

  From: ₹ 1,945.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT

  OSG

  Achieves female threading of stainless steel with a water-soluble cutting fluid.
  Tool Material: Vanadium high-speed steel
  Hole type: For blind holes
  Work material: General steel / stainless steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN	Available	40 ～ 62

  From: ₹ 1,819.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap TiN Coating TIN-SFT

  OSG

  Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.3 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN	Available	34 ～ 95

  From: ₹ 1,674.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series NC Planet Cutter WX-PNC

  OSG

  If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / unified / Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1 ～ 28	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	60 ～ 120

  From: ₹ 21,469.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

  OSG

  Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.0UN ～ M20	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.25 ～ 80	Vanadium High-Speed Steel	Roll tap	For blind hole	2P ～ 4P	TiN	Available	30 ～ 105

  From: ₹ 1,780.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap with Long Shank_A-LT-SFT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.25 ～ 3	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	Other	Available	80 ～ 200

  From: ₹ 2,617.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated_TIN-TPT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 3,249.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.2UN ～ M12	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.25 ～ 56	Powder high-speed steel	Roll tap	For blind hole	2P ～ 4P	TiCN	Available	60 ～ 200

  From: ₹ 2,592.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 4,211.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series Carbide New Roll Tap OT-NRT

  OSG

  Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 1.75	Carbide	Roll tap	For through hole / For blind hole	2P	Non-Coated	NA	46 ～ 82

  From: ₹ 9,010.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series, X Performer Long Shank LT-S-XPF

  OSG

  [Specifications]
  · Shape: Roll tap
  · Screw type: metric
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 1.75	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	-	Other	Available	80 ～ 150

  From: ₹ 2,736.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

  OSG

  Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.25 ～ 32	Carbide	Thread cutter	For through hole / For blind hole	-	For High Hardness (Silicon Group) / Other	Available	40

  From: ₹ 7,271.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap TiN coated with Long Shank_TIN-LT-SFT

  OSG

  Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN	Available	100 ～ 150

  From: ₹ 2,537.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap V Coating V-SFT

  OSG

  Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Other	Available	46 ～ 95

  From: ₹ 1,805.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT

  OSG

  Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.6 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.45 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	44 ～ 75

  From: ₹ 945.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap TiN coated_TIN-HT

  OSG

  Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 3	Vanadium High-Speed Steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	TiN	Available	40 ～ 120

  From: ₹ 1,687.98
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap Series V Coating V-POT

  OSG

  Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	1 ～ 1.25	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiCN	Available	70 ～ 75

  From: ₹ 2,762.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 3,394.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	55 ～ 95

  From: ₹ 3,152.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless (Nu-Roll) Tap for Steels_NRT

  OSG

  Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.2 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.25 ～ 1.25	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	Non-Coated	NA	32 ～ 75

  From: ₹ 1,047.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated with Long Shank_TIN-LT-TPT

  OSG

  [Specifications]
  · Shape: Pipe tap
  · Screw type: pipe taper
  · Coating: TiN
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [○] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Tempered Steel (25 to 35HRC) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  Rc1/2 ～ Rc3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	14 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	100 ～ 150

  From: ₹ 5,051.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series MC - Planet Cutter PNGT

  OSG

  If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / Taper for Pipe / Parallel for Pipes	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	1 ～ 19	Cobalt HSS	Thread cutter	For through hole / For blind hole	-	TiN	Available	80 ～ 210

  From: ₹ 24,006.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap V coated with Long Shank_V-LT-POT

  OSG

  Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.7 ～ 1	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiCN	Available	100

  From: ₹ 2,472.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for General Application (with OX)_EX-H-POT

  OSG

  For standard point taps, it is used when the protruding length of the screw is insufficient.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M42	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.4 ～ 4.5	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	40 ～ 175

  From: ₹ 857.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank・with Interrupted Threads_EX-LT-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	120 ～ 150

  From: ₹ 5,372.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	120 ～ 150

  From: ₹ 5,604.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  S0.5 ～ S0.9	Miniature	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	.02 ～ 0.225	Powder high-speed steel	Roll tap	For blind hole	2P	CrN	Available	30

  From: ₹ 3,356.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap for Steel HRT

  OSG

  Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M3.5	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.3 ～ 0.6	High-speed steel	Roll tap	For blind hole	2.5P	Non-Coated	NA	34 ～ 48

  From: ₹ 1,002.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT

  OSG

  Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 1.75	Carbide	Roll tap	For through hole / For blind hole	2P	Non-Coated	NA	100 ～ 150

  From: ₹ 14,457.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for General Application (with OX)_EX-H-SFT

  OSG

  Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M5 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.8 ～ 3	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	60 ～ 120

  From: ₹ 895.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	TiN	Available	100 ～ 150

  From: ₹ 3,516.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

  OSG

  Enables efficient chip discharge by discharging cutting fluid from the oil holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 3	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	60 ～ 120

  From: ₹ 22,756.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap TiN coated with Long Shank_TIN-LT-POT

  OSG

  Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 3	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	100 ～ 200

  From: ₹ 2,423.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap_HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	46 ～ 88

  From: ₹ 2,119.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	46 ～ 88

  From: ₹ 2,306.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for Deep Holes EX-DH-POT

  OSG

  Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.4 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	4P	Non-Coated	NA	40 ～ 95

  From: ₹ 916.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for Thin Plate EX-SS-POT

  OSG

  Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.4 ～ 1.75	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	40 ～ 82

  From: ₹ 868.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 4,381.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Model A Tap Series, Spiral Tap A-SFT	Model A Tap Series, Pointed Tap A-POT	LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT	Pointed Tap Series TiN Coating TIN-POT	CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT	Fluteless Tap (X Performer)_S-XPF	Spiral Pointed Tap with Long Shank_A-LT-POT	CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT	Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT	Spiral Tap TiN Coating TIN-SFT	Planet Cutter Series NC Planet Cutter WX-PNC	Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT	Spiral Tap with Long Shank_A-LT-SFT	Taper Pipe Thread Tap TiN coated_TIN-TPT	CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT	Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT	Grooveless Tap Series Carbide New Roll Tap OT-NRT	Grooveless Tap Series, X Performer Long Shank LT-S-XPF	Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC	Spiral Tap TiN coated with Long Shank_TIN-LT-SFT	Spiral Tap V Coating V-SFT	Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT	Straight Flutes Tap TiN coated_TIN-HT	Pointed Tap Series V Coating V-POT	Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT	Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT	Fluteless (Nu-Roll) Tap for Steels_NRT	Taper Pipe Thread Tap TiN coated with Long Shank_TIN-LT-TPT	Planet Cutter Series MC - Planet Cutter PNGT	Pointed Tap V coated with Long Shank_V-LT-POT	Pointed Tap for General Application (with OX)_EX-H-POT	Long Shank・with Interrupted Threads_EX-LT-IRT	Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT	UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT	Grooveless Tap for Steel HRT	Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT	Spiral Tap for General Application (with OX)_EX-H-SFT	Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT	Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC	Pointed Tap TiN coated with Long Shank_TIN-LT-POT	LH Spiral SYNCHRO Tap_HS-RFT	LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT	Pointed Tap for Deep Holes EX-DH-POT	Pointed Tap for Thin Plate EX-SS-POT	Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT
From	₹ 1,764.33-	₹ 2,448.00-	₹ 2,930.95-	₹ 1,619.09-	₹ 2,154.09-	₹ 2,505.02-	₹ 2,525.11-	₹ 1,945.15-	₹ 1,819.25-	₹ 1,674.60-	₹ 21,469.49-	₹ 1,780.40-	₹ 2,617.53-	₹ 3,249.73-	₹ 2,592.07-	₹ 4,211.40-	₹ 9,010.45-	₹ 2,736.73-	₹ 7,271.93-	₹ 2,537.16-	₹ 1,805.85-	₹ 945.96-	₹ 1,687.98-	₹ 2,762.18-	₹ 3,394.38-	₹ 3,152.22-	₹ 1,047.76-	₹ 5,051.20-	₹ 24,006.31-	₹ 2,472.87-	₹ 857.56-	₹ 5,372.65-	₹ 5,604.38-	₹ 3,356.87-	₹ 1,002.22-	₹ 14,457.76-	₹ 895.07-	₹ 3,516.25-	₹ 22,756.65-	₹ 2,423.31-	₹ 2,119.27-	₹ 2,306.78-	₹ 916.49-	₹ 868.27-	₹ 4,381.51-
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Screw size (Nominal)	No.10-32UNF ～ M56	No.10-32UNF ～ M24	M3 ～ M30	M1.4 ～ M42	No.2UN ～ M6	M1 ～ M45	M2 ～ M24	No.2UN ～ M12	M2 ～ M6	M1.4 ～ M16	-	No.0UN ～ M20	M2 ～ M24	R1 ～ R3/8	No.2UN ～ M12	R1 ～ R3/8	M3 ～ M12	M3 ～ M12	-	M3 ～ M16	M3 ～ M16	M2.6 ～ M10	M2 ～ M24	M8 ～ M10	R1 ～ R3/8	R1 ～ R3/8	M1.2 ～ M10	Rc1/2 ～ Rc3/8	-	M4 ～ M6	M2 ～ M42	R1 ～ R3/8	R1 ～ R3/8	S0.5 ～ S0.9	M1.4 ～ M3.5	M3 ～ M12	M5 ～ M24	M3 ～ M10	-	M3 ～ M24	M3 ～ M14	M3 ～ M14	M2 ～ M16	M2 ～ M12	R1 ～ R3/8
Screw Types	Meter / unified	Meter / unified	Meter	Meter	Meter / unified	Meter	Meter	Meter / unified	Meter	Meter	Meter / unified / Taper for Pipe	Meter / unified	Meter	Taper for Pipe	Meter / unified	Taper for Pipe	Meter	Meter	Meter / unified	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Meter	Taper for Pipe	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Taper for Pipe	Taper for Pipe	Miniature	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]
Pitch (P), Number of Threading(mm)	0.25 ～ 5.5	0.25 ～ 3	0.5 ～ 3.5	0.3 ～ 4.5	0.25 ～ 56	0.2 ～ 4.5	0.25 ～ 3	0.25 ～ 56	0.4 ～ 1	0.3 ～ 2	1 ～ 28	0.25 ～ 80	0.25 ～ 3	11 ～ 28	0.25 ～ 56	11 ～ 28	0.5 ～ 1.75	0.5 ～ 1.75	0.25 ～ 32	0.5 ～ 2	0.5 ～ 2	0.45 ～ 1.5	0.4 ～ 3	1 ～ 1.25	11 ～ 28	11 ～ 28	0.25 ～ 1.25	14 ～ 28	1 ～ 19	0.7 ～ 1	0.4 ～ 4.5	11 ～ 28	11 ～ 28	.02 ～ 0.225	0.3 ～ 0.6	0.5 ～ 1.75	0.8 ～ 3	0.5 ～ 1.5	0.5 ～ 3	0.5 ～ 3	0.5 ～ 2	0.5 ～ 2	0.4 ～ 2	0.4 ～ 1.75	11 ～ 28
Tool Material Type	Powder high-speed steel / Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel / Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Carbide	Carbide	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	High-speed steel	Vanadium High-Speed Steel	Cobalt HSS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Powder high-speed steel	High-speed steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide
Tap Type	Spiral Tap	Point tap	Point tap	Point tap	Roll tap	Roll tap	Point tap	Roll tap	Spiral Tap	Spiral Tap	Thread cutter	Roll tap	Spiral Tap	Tap for pipes	Roll tap	Tap for pipes	Roll tap	Roll tap	Thread cutter	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Point tap	Tap for pipes	Tap for pipes	Roll tap	Tap for pipes	Thread cutter	Point tap	Point tap	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Spiral Tap	Spiral Tap	Thread cutter	Point tap	Point tap	Point tap	Point tap	Point tap	Tap for pipes
Hole type	For blind hole	For through hole	For through hole	For through hole	For blind hole	For through hole / For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole / For blind hole
Chamfer threads (Lcf)	1.5P ～ 2.5P	5P	6P	5P	1P	2P ～ 4P	5P	2P ～ 4P	2.5P	2.5P	-	2P ～ 4P	2.5P	2.5P	2P ～ 4P	2.5P	2P	-	-	2.5P	2.5P	2.5P	1.5P ～ 5P	5P	2.5P	2.5P	2P ～ 4P	2.5P	-	5P	5P	2.5P	2.5P	2P	2.5P	2P	2.5P	3P	-	5P	6P	5P	4P	5P	2.5P
Coating Type	Other	Other	TiN	TiN	TiCN	TiCN	Other	TiCN	TiN	TiN	TiAlN	TiN	Other	TiN	TiCN	TiN	Non-Coated	Other	For High Hardness (Silicon Group) / Other	TiN	Other	Non-Coated	TiN	TiCN	TiN	Non-Coated	Non-Coated	TiN	TiN	TiCN	Non-Coated	Non-Coated	Non-Coated	CrN	Non-Coated	Non-Coated	Non-Coated	TiN	TiAlN	TiN	TiN	TiN	Non-Coated	Non-Coated	TiN
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	NA	Available	Available	Available	NA	NA	Available	Available	Available	NA	NA	NA	Available	NA	NA	NA	Available	Available	Available	Available	Available	NA	NA	Available
Overall Length (L)(mm)	34 ～ 250	34 ～ 120	100 ～ 200	34 ～ 175	30 ～ 62	30 ～ 220	80 ～ 200	30 ～ 82	40 ～ 62	34 ～ 95	60 ～ 120	30 ～ 105	80 ～ 200	55 ～ 95	60 ～ 200	55 ～ 95	46 ～ 82	80 ～ 150	40	100 ～ 150	46 ～ 95	44 ～ 75	40 ～ 120	70 ～ 75	55 ～ 95	55 ～ 95	32 ～ 75	100 ～ 150	80 ～ 210	100	40 ～ 175	120 ～ 150	120 ～ 150	30	34 ～ 48	100 ～ 150	60 ～ 120	100 ～ 150	60 ～ 120	100 ～ 200	46 ～ 88	46 ～ 88	40 ～ 95	40 ～ 82	55 ～ 95

Loading...