OSG Screw-Hole-Related Tools（Hole type：For through hole）

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT

  OSG

  Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M20	Meter	High Hardness Steel (50-60 HRC)[◎]	0.4 ～ 2.5	Carbide	Hand Tap	For through hole	3P	TiCN / Other	Available	40 ～ 105

  From: ₹ 10,036.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN Zero Tap Series V-DC-MT, UNC DIN 2184-1

  OSG

  Ideal for aluminum casting alloy and cast iron while using synchronized feed control machine due to rake angle 0 degree.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Vanadium High-Speed Steel	-	For through hole	-	-	-	80 ～ 160

  From: ₹ 3,060.00
  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap High Performance Series A-POT, Metric DIN 371

  OSG

  Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Powder high-speed steel	-	For through hole	-	-	-	56 ～ 100

  From: ₹ 2,216.00
  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M30	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.5 ～ 3.5	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	100 ～ 200

  From: ₹ 2,930.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Model A Tap Series, Pointed Tap A-POT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10-32UNF ～ M24	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	0.25 ～ 3	Powder high-speed steel	Point tap	For through hole	5P	Other	Available	34 ～ 120

  From: ₹ 2,448.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 374

  OSG

  Designed specifically for through holes in connection rods and wheel hubs with tapping speed up to 40m/min. This is also suitable for Forged Steel automotive components.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Powder high-speed steel	-	For through hole	-	-	-	90 ～ 110

  From: ₹ 3,871.00
  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Tap for General Use HT

  OSG

  High-speed steel hand tap.
  Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.12UN ～ M35	Meter / unified / Whitworth / Sewing Machine	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.5 ～ 40	High-speed steel	Hand Tap	For through hole	1.5P ～ 9P	Non-Coated	NA	44 ～ 145

  From: ₹ 881.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN V NU-ROLL Series V-NRT-B, Metric DIN 2174

  OSG

  Enables High cutiing Speed tapping in Aluminum, Stainless Steel & Steel due to Cobalt HSS substrate

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Cobalt HSS	-	For through hole	-	-	-	40 ～ 100

  From: ₹ 3,304.00
  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Tap with Long Shank_A-LT-POT

  OSG

  Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	0.25 ～ 3	Powder high-speed steel	Point tap	For through hole	5P	Other	Available	80 ～ 200

  From: ₹ 2,525.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN Zero Tap Series V-DC-MT, UNF DIN 2184-1

  OSG

  Ideal for aluminum casting alloy and cast iron while using synchronized feed control machine due to rake angle 0 degree.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Vanadium High-Speed Steel	-	For through hole	-	-	-	80 ～ 125

  From: ₹ 3,607.00
  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT

  OSG

  Suitable for tapping hardening steel up to 55 HRC.
  Work material: High hardness steel to 55 HRC
  For coating / surface treatment / steel
  Accuracy (class) OH3

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (45 to 55 HRC)[◎]	0.5 ～ 1.75	Carbide	Hand Tap	For through hole	2.5P ～ 5P	TiCN	Available	46 ～ 82

  From: ₹ 12,280.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes General Use TPT

  OSG

  Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1"1/4 ～ R5/8	Taper for Pipe	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	11 ～ 14	High-speed steel	Tap for pipes	For through hole	2.5P	Non-Coated	NA	82 ～ 105

  From: ₹ 8,710.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Tap for General Use Long Shank EX-LT

  OSG

  Long shank type.
  Tool Material: Vanadium high-speed steel
  Work material: general steel / cast iron / aluminum / copper

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  3/8UN ～ M12	Meter / unified	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25 ～ 16	Vanadium High-Speed Steel	Hand Tap	For through hole	1.5P ～ 5P	Non-Coated	NA	150

  From: ₹ 3,344.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless Tap (X Performer)_S-XPF

  OSG

  There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
  * M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M45	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.2 ～ 4.5	Powder high-speed steel / Vanadium High-Speed Steel	Roll tap	For through hole	2P ～ 4P	TiCN	Available	30 ～ 220

  From: ₹ 2,505.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN Zero Tap Series V-DC-MT, Metric DIN 374

  OSG

  Ideal for aluminum casting alloy and cast iron while using synchronized feed control machine due to rake angle 0 degree.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Vanadium High-Speed Steel	-	For through hole	-	-	-	100 ～ 140

  From: ₹ 2,916.00
  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT

  OSG

  Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 42 to 52 HRC. In order to maximize the properties of the base material, V coating with excellent abrasion resistance has been applied to the surface.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (45 to 55 HRC)[◎]	0.5 ～ 1.75	Powder high-speed steel	Hand Tap	For through hole	2.5P ～ 5P	TiCN	Available	46 ～ 82

  From: ₹ 4,381.51
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT

  OSG

  This is a short thread long shank type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1/2 ～ R3/8	Taper for Pipe	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	14 ～ 28	Carbide	Tap for pipes	For through hole	2.5P	Non-Coated	NA	100 ～ 150

  From: ₹ 4,961.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap High Performance Series A-POT, Metric DIN 374

  OSG

  Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Powder high-speed steel	-	For through hole	-	-	-	80 ～ 140

  From: ₹ 2,599.00
  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

  OSG

  Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.25 ～ 32	Carbide	Thread cutter	For through hole	-	For High Hardness (Silicon Group) / Other	Available	40

  From: ₹ 7,271.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap TiN coated_TIN-HT

  OSG

  Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.4 ～ 3	Vanadium High-Speed Steel	Hand Tap	For through hole	1.5P ～ 5P	TiN	Available	40 ～ 120

  From: ₹ 1,687.98
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap Series TiN Coating TIN-POT

  OSG

  Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M42	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.3 ～ 4.5	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	34 ～ 175

  From: ₹ 1,619.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.4 ～ 1	Vanadium High-Speed Steel	Point tap	For through hole	6P	Non-Coated	NA	40 ～ 62

  From: ₹ 1,259.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for General Application (with OX)_EX-H-POT

  OSG

  For standard point taps, it is used when the protruding length of the screw is insufficient.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M42	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.4 ～ 4.5	Vanadium High-Speed Steel	Point tap	For through hole	5P	Non-Coated	NA	40 ～ 175

  From: ₹ 857.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated_TIN-TPT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 3,249.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]	11 ～ 28	Carbide	Tap for pipes	For through hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 4,211.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series Carbide New Roll Tap OT-NRT

  OSG

  Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.5 ～ 1.75	Carbide	Roll tap	For through hole	2P	Non-Coated	NA	46 ～ 82

  From: ₹ 9,010.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap High Performance Series A-POT, Metric DIN 376

  OSG

  Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Powder high-speed steel	-	For through hole	-	-	-	110 ～ 160

  From: ₹ 4,354.00
  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap High Performance Series A-POT, UNF DIN 2184-1

  OSG

  Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Powder high-speed steel	-	For through hole	-	-	-	56 ～ 140

  From: ₹ 3,145.00
  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 371

  OSG

  Designed specifically for through holes in connection rods and wheel hubs with tapping speed up to 40m/min. This is also suitable for Forged Steel automotive components.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Powder high-speed steel	-	For through hole	-	-	-	80 ～ 100

  From: ₹ 3,748.00
  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN Hardened Steel Series V-XPM-HT, Metric DIN 371

  OSG

  Tapping of hardened steel (38~52HRC)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	-	For through hole	-	-	-	46 ～ 75

  From: ₹ 3,737.00
  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN Zero Tap Series V-DC-MT, Metric DIN 376

  OSG

  Ideal for aluminum casting alloy and cast iron while using synchronized feed control machine due to rake angle 0 degree.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Vanadium High-Speed Steel	-	For through hole	-	-	-	110 ～ 160

  From: ₹ 3,987.00
  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN General & SUS Application Series VA-POT, Metric DIN 371(TAP Limit:6G)

  OSG

  General application tap in DIN series. Suitable for carbon steel, alloy steel, mild steel, and stainless steel in through hole application.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Vanadium High-Speed Steel	-	For through hole	-	-	-	45 ～ 100

  From: ₹ 1,680.00
  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT

  OSG

  Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	0.5 ～ 1.75	Vanadium High-Speed Steel	Hand Tap	For through hole	1.5P	Non-Coated	NA	46 ～ 82

  From: ₹ 7,129.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT

  OSG

  Excellent for hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC to 60 HRC or higher

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1/2 ～ R3/8	Taper for Pipe	High Hardness Steel (50-60 HRC)[◎]	14 ～ 28	Carbide	Tap for pipes	For through hole	3P	TiCN	Available	59 ～ 87

  From: ₹ 22,417.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT

  OSG

  This is a long shank type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1/2 ～ R3/8	Taper for Pipe	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	14 ～ 28	Carbide	Tap for pipes	For through hole	2.5P	Non-Coated	NA	100 ～ 150

  From: ₹ 4,306.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Tap DIN Zero Tap with Oil Hole Series OIL-S-XPF, Metric DIN 2174

  OSG

  Long tool life in Carbon and Alloy steels thanks to the high wear resistance and toughness of the Cobalt HSS substrate.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	Vanadium High-Speed Steel	-	For through hole	-	-	-	80 ～ 125

  From: ₹ 6,979.00
  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Insert Screw Thread Tap_HL-HT

  OSG

  Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.8UN	unified	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎]	32	High-speed steel	Hand Tap	For through hole	5P	Non-Coated	NA	60

  From: ₹ 1,299.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Straight Flutes Tap_OTT

  OSG

  Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M20	Meter	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	0.3 ～ 2.5	Carbide	Hand Tap	For through hole	1.5P ～ 3P	Non-Coated	NA	34 ～ 105

  From: ₹ 6,456.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT

  OSG

  Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	0.5 ～ 2.5	Carbide	Hand Tap	For through hole	1.5P ～ 3P	Non-Coated	NA	100 ～ 150

  From: ₹ 11,929.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Straight Flutes Tap_CPM-HT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M48	Meter	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	0.5 ～ 5	Powder high-speed steel	Hand Tap	For through hole	2P ～ 5P	Non-Coated	NA	46 ～ 185

  From: ₹ 1,211.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Super Planet DR-PNAC

  OSG

  A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M12	Meter	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1 ～ 1.75	Carbide	Thread cutter	For through hole	-	TiAlN	Available	62 ～ 89

  From: ₹ 54,133.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	46 ～ 88

  From: ₹ 2,306.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]	11 ～ 28	Carbide	Tap for pipes	For through hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 4,381.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT

  OSG

  Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Quenched and tempered steel (45 to 55 HRC)[◎]	11 ～ 28	Powder high-speed steel	Tap for pipes	For through hole	3P	TiCN	Available	59 ～ 109

  From: ₹ 4,877.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT

  OSG

  It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	11 ～ 28	Carbide	Tap for pipes	For through hole	2.5P	Non-Coated	NA	55 ～ 95

  From: ₹ 3,152.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT	HSS Tap DIN Zero Tap Series V-DC-MT, UNC DIN 2184-1	HSS Tap High Performance Series A-POT, Metric DIN 371	LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT	Model A Tap Series, Pointed Tap A-POT	HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 374	Hand Tap for General Use HT	HSS Tap DIN V NU-ROLL Series V-NRT-B, Metric DIN 2174	Spiral Pointed Tap with Long Shank_A-LT-POT	HSS Tap DIN Zero Tap Series V-DC-MT, UNF DIN 2184-1	Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT	Taper Tap for Pipes General Use TPT	Hand Tap for General Use Long Shank EX-LT	Fluteless Tap (X Performer)_S-XPF	HSS Tap DIN Zero Tap Series V-DC-MT, Metric DIN 374	Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT	Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT	HSS Tap High Performance Series A-POT, Metric DIN 374	Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC	Straight Flutes Tap TiN coated_TIN-HT	Pointed Tap Series TiN Coating TIN-POT	LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT	Pointed Tap for General Application (with OX)_EX-H-POT	Taper Pipe Thread Tap TiN coated_TIN-TPT	Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT	Grooveless Tap Series Carbide New Roll Tap OT-NRT	HSS Tap High Performance Series A-POT, Metric DIN 376	HSS Tap High Performance Series A-POT, UNF DIN 2184-1	HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 371	HSS Tap DIN Hardened Steel Series V-XPM-HT, Metric DIN 371	HSS Tap DIN Zero Tap Series V-DC-MT, Metric DIN 376	HSS Tap DIN General & SUS Application Series VA-POT, Metric DIN 371(TAP Limit:6G)	Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT	Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT	Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT	HSS Tap DIN Zero Tap with Oil Hole Series OIL-S-XPF, Metric DIN 2174	Straight Flutes Insert Screw Thread Tap_HL-HT	Tungsten Carbide Straight Flutes Tap_OTT	Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT	CPM Straight Flutes Tap_CPM-HT	Planet Cutter Series Super Planet DR-PNAC	LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT	Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT	Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT	Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT
From	₹ 10,036.00-	₹ 3,060.00-	₹ 2,216.00-	₹ 2,930.95-	₹ 2,448.00-	₹ 3,871.00-	₹ 881.67-	₹ 3,304.00-	₹ 2,525.11-	₹ 3,607.00-	₹ 12,280.00-	₹ 8,710.44-	₹ 3,344.82-	₹ 2,505.02-	₹ 2,916.00-	₹ 4,381.51-	₹ 4,961.47-	₹ 2,599.00-	₹ 7,271.93-	₹ 1,687.98-	₹ 1,619.09-	₹ 1,259.38-	₹ 857.56-	₹ 3,249.73-	₹ 4,211.40-	₹ 9,010.45-	₹ 4,354.00-	₹ 3,145.00-	₹ 3,748.00-	₹ 3,737.00-	₹ 3,987.00-	₹ 1,680.00-	₹ 7,129.95-	₹ 22,417.78-	₹ 4,306.51-	₹ 6,979.00-	₹ 1,299.56	₹ 6,456.24-	₹ 11,929.00-	₹ 1,211.16-	₹ 54,133.29-	₹ 2,306.78-	₹ 4,381.51-	₹ 4,877.09-	₹ 3,152.22-
Days to Ship	5 Day(s) or more	2 Day(s)	2 Day(s)	5 Day(s) or more	5 Day(s) or more	2 Day(s) or more	5 Day(s) or more	2 Day(s) or more	5 Day(s) or more	2 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	2 Day(s)	7 Day(s) or more	5 Day(s) or more	2 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	2 Day(s) or more	2 Day(s)	2 Day(s) or more	2 Day(s)	2 Day(s)	2 Day(s)	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	2 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Screw size (Nominal)	M2 ～ M20	-	-	M3 ～ M30	No.10-32UNF ～ M24	-	No.12UN ～ M35	-	M2 ～ M24	-	M3 ～ M12	R1"1/4 ～ R5/8	3/8UN ～ M12	M1 ～ M45	-	M3 ～ M12	R1/2 ～ R3/8	-	-	M2 ～ M24	M1.4 ～ M42	M2 ～ M6	M2 ～ M42	R1 ～ R3/8	R1 ～ R3/8	M3 ～ M12	-	-	-	-	-	-	M3 ～ M12	R1/2 ～ R3/8	R1/2 ～ R3/8	-	No.8UN	M1.4 ～ M20	M3 ～ M20	M3 ～ M48	M6 ～ M12	M3 ～ M14	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8
Screw Types	Meter	-	-	Meter	Meter / unified	-	Meter / unified / Whitworth / Sewing Machine	-	Meter	-	Meter	Taper for Pipe	Meter / unified	Meter	-	Meter	Taper for Pipe	-	Meter / unified	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Meter	-	-	-	-	-	-	Meter	Taper for Pipe	Taper for Pipe	-	unified	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Taper for Pipe
work material	High Hardness Steel (50-60 HRC)[◎]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Quenched and tempered steel (45 to 55 HRC)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	Quenched and tempered steel (45 to 55 HRC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	-	-	-	-	-	Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	High Hardness Steel (50-60 HRC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]	Quenched and tempered steel (45 to 55 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]
Pitch (P), Number of Threading(mm)	0.4 ～ 2.5	-	-	0.5 ～ 3.5	0.25 ～ 3	-	0.5 ～ 40	-	0.25 ～ 3	-	0.5 ～ 1.75	11 ～ 14	1.25 ～ 16	0.2 ～ 4.5	-	0.5 ～ 1.75	14 ～ 28	-	0.25 ～ 32	0.4 ～ 3	0.3 ～ 4.5	0.4 ～ 1	0.4 ～ 4.5	11 ～ 28	11 ～ 28	0.5 ～ 1.75	-	-	-	-	-	-	0.5 ～ 1.75	14 ～ 28	14 ～ 28	-	32	0.3 ～ 2.5	0.5 ～ 2.5	0.5 ～ 5	1 ～ 1.75	0.5 ～ 2	11 ～ 28	11 ～ 28	11 ～ 28
Tool Material Type	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	Cobalt HSS	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel / Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Carbide	Powder high-speed steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	-	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Vanadium High-Speed Steel	High-speed steel	Carbide	Carbide	Powder high-speed steel	Carbide	Vanadium High-Speed Steel	Carbide	Powder high-speed steel	Carbide
Tap Type	Hand Tap	-	-	Point tap	Point tap	-	Hand Tap	-	Point tap	-	Hand Tap	Tap for pipes	Hand Tap	Roll tap	-	Hand Tap	Tap for pipes	-	Thread cutter	Hand Tap	Point tap	Point tap	Point tap	Tap for pipes	Tap for pipes	Roll tap	-	-	-	-	-	-	Hand Tap	Tap for pipes	Tap for pipes	-	Hand Tap	Hand Tap	Hand Tap	Hand Tap	Thread cutter	Point tap	Tap for pipes	Tap for pipes	Tap for pipes
Hole type	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole
Chamfer threads (Lcf)	3P	-	-	6P	5P	-	1.5P ～ 9P	-	5P	-	2.5P ～ 5P	2.5P	1.5P ～ 5P	2P ～ 4P	-	2.5P ～ 5P	2.5P	-	-	1.5P ～ 5P	5P	6P	5P	2.5P	2.5P	2P	-	-	-	-	-	-	1.5P	3P	2.5P	-	5P	1.5P ～ 3P	1.5P ～ 3P	2P ～ 5P	-	5P	2.5P	3P	2.5P
Coating Type	TiCN / Other	-	-	TiN	Other	-	Non-Coated	-	Other	-	TiCN	Non-Coated	Non-Coated	TiCN	-	TiCN	Non-Coated	-	For High Hardness (Silicon Group) / Other	TiN	TiN	Non-Coated	Non-Coated	TiN	TiN	Non-Coated	-	-	-	-	-	-	Non-Coated	TiCN	Non-Coated	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiN	TiN	TiCN	Non-Coated
Coating Y/N	Available	-	-	Available	Available	-	NA	-	Available	-	Available	NA	NA	Available	-	Available	NA	-	Available	Available	Available	NA	NA	Available	Available	NA	-	-	-	-	-	-	NA	Available	NA	-	NA	NA	NA	NA	Available	Available	Available	Available	NA
Overall Length (L)(mm)	40 ～ 105	80 ～ 160	56 ～ 100	100 ～ 200	34 ～ 120	90 ～ 110	44 ～ 145	40 ～ 100	80 ～ 200	80 ～ 125	46 ～ 82	82 ～ 105	150	30 ～ 220	100 ～ 140	46 ～ 82	100 ～ 150	80 ～ 140	40	40 ～ 120	34 ～ 175	40 ～ 62	40 ～ 175	55 ～ 95	55 ～ 95	46 ～ 82	110 ～ 160	56 ～ 140	80 ～ 100	46 ～ 75	110 ～ 160	45 ～ 100	46 ～ 82	59 ～ 87	100 ～ 150	80 ～ 125	60	34 ～ 105	100 ～ 150	46 ～ 185	62 ～ 89	46 ～ 88	55 ～ 95	59 ～ 109	55 ～ 95

Loading...