MISUMI Punches For Heavy Load, With Dowel Holes（Jector：Standard type）

• You can add up to 6 items per a category to the compare list. Compare

  

  Jector Punches for Heavy Load with Dowel Holes TiCN Coating, Spring & Pin Reinforced type

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!
  
  [What is TiCN coating]
  TiCN is a coating widely used in press molds. Improved punch life can be expected by increasing the wear resistance of the cutting edge.

  • FLANGE
  • SKH51
  • TiCN

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	Standard type	A / D / R / E / G	SKH51 Equivalent	TiCN	With locating dowel hole

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Jector Punches for Heavy Load with Dowel Holes Normal, Spring & Pin Reinforced type

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!

  • FLANGE
  • SKH51

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	Standard type	A / D / R / E / G	SKH51 Equivalent	None	With locating dowel hole

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Jector Punches for Heavy Load with Dowel Holes HW Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!
  
  [What is HW coating]
  It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating.
  Since the coating film is less likely to peel off, the life of the punch can be expected to be longer than that of conventional TiCN.

  • FLANGE
  • SKH51
  • HW

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	Standard type	A / D / R / E / G	SKH51 Equivalent	HW coating	With locating dowel hole

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Jector Punches for Heavy Load with Dowel Holes RW Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!
  
  [What is RW coating]
  It is a coating that is harder and more heat resistant than TiCN. Furthermore, WPC treatment is applied to the base to strengthen the adhesion of the coating film.
  Compared to TiCN/HW, it can be expected to have a significantly longer punch life and contribute to reducing mold maintenance costs.

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	Standard type	A / D / R / E / G	SKH51 Equivalent	RW coating	With locating dowel hole

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Jector Punch with Dowel Holes for Punching Thick Plates - RX Coating (Al-Cr Coating + Nitriding Treatment) -

  MISUMI

  For complete product overview and details on Jector Punches for Heavy Load with Dowel Holes －RX Coating－ see the sections below:

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	Standard type	A / D / R / E / G	Equivalent to SKH51	RX Coat	With locating dowel hole

  Days to Ship: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Jector Punches for Heavy Load with Dowel Holes WPC Treatment

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!

  • FLANGE
  • SKH51
  • WPC

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	Standard type	A / D / R / E / G	SKH51 Equivalent	WPC	With locating dowel hole

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Heavy-load punches
Shank type
Jector
Tip shape
Material
Surface treatment
Shank (mounting part) shape

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Jector Punches for Heavy Load with Dowel Holes TiCN Coating, Spring & Pin Reinforced type	Jector Punches for Heavy Load with Dowel Holes Normal, Spring & Pin Reinforced type	Jector Punches for Heavy Load with Dowel Holes HW Coating	Jector Punches for Heavy Load with Dowel Holes RW Coating	Jector Punch with Dowel Holes for Punching Thick Plates - RX Coating (Al-Cr Coating + Nitriding Treatment) -	Jector Punches for Heavy Load with Dowel Holes WPC Treatment
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	-	-	-	-	-	-
Days to Ship	7 Day(s) or more	2 Day(s) or more	7 Day(s) or more	9 Day(s) or more	19 Day(s) or more	7 Day(s) or more
Specifications	FLANGE SKH51 TiCN	FLANGE SKH51	FLANGE SKH51 HW			FLANGE SKH51 WPC
Heavy-load punches	Yes	Yes	Yes	Yes	Yes	Yes
Shank type	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped
Jector	Standard type	Standard type	Standard type	Standard type	Standard type	Standard type
Tip shape	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G
Material	SKH51 Equivalent	SKH51 Equivalent	SKH51 Equivalent	SKH51 Equivalent	Equivalent to SKH51	SKH51 Equivalent
Surface treatment	TiCN	None	HW coating	RW coating	RX Coat	WPC
Shank (mounting part) shape	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole

Loading...