MISUMI Punches（Tip shape：R Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Double-Stepped Tapped Punches -HW Coating-

  MISUMI

  ・As a measure against bolt breakage, we have expanded the specifications for large diameter tap types and added specifications for extra large diameter taps!
  ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches.
  ・A punch with a guide section separate from the cutting edge. Please use this when the required cutting edge length B for the guide cannot be secured with the cutting edge diameter P.
  ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try the large diameter tap type or the extra large diameter tap type.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Double-stepped	R	None	Powdered high-speed steel	No	Tapped	HW coating

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Key Flat Shank Tapped Punches -HW Coating-

  MISUMI

  This punch has a tapped punch with a flat surface on the shank to prevent rotation, and has been treated with WPC®, a type of precision shot peening, to improve fatigue strength and the adhesion of the TiCN coating.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	R	None	Powdered high-speed steel	No	With key flat tap	HW coating

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Jector Punch - RX Coating (Al-Cr Coating + Nitriding Treatment) -

  MISUMI

  For complete product overview and details on Jector Punches －RX Coating－ see the sections below:

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	R	Standard type / Spring reinforced type	SKD11 Equivalent / Powdered high-speed steel / Equivalent to SKH51	No	Standard	RX Coat

  Days to Ship: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shoulder 2-Stage Punch - RX Coating (Al-Cr Coating + Nitriding Treatment) -

  MISUMI

  For complete product overview and details on Double-stepped Shoulder Punches －RX Coating－ see the sections below:

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Double-stepped	R	None	Powdered high-speed steel / Equivalent to SKH51	No	Standard	RX Coat

  Days to Ship: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Stepped Shoulder Punches -DLC Coating-

  MISUMI

  A two-stage shoulder punch with DLC coating. Effective for aluminum piercing processing.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Double-stepped	R	None	SKH51 Equivalent / Powdered high-speed steel	No	Standard	Without DLC foundation

  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Length Specified/B Dimension Keep Type Jector Punch -RX Coating (Al-Cr Coat + Nitriding Treatment)-

  MISUMI

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	R	Standard type / Spring reinforced type	SKD11 Equivalent / Equivalent to SKH51	No	Standard	RX Coat

  Days to Ship: 17 Day(s) or more

  17 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Shank type
Tip shape
Jector
Material
Heavy-load punches
Shank (mounting part) shape
Surface treatment

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Double-Stepped Tapped Punches -HW Coating-	Key Flat Shank Tapped Punches -HW Coating-	Jector Punch - RX Coating (Al-Cr Coating + Nitriding Treatment) -	Shoulder 2-Stage Punch - RX Coating (Al-Cr Coating + Nitriding Treatment) -	Double Stepped Shoulder Punches -DLC Coating-	Full Length Specified/B Dimension Keep Type Jector Punch -RX Coating (Al-Cr Coat + Nitriding Treatment)-
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	-	-	-	-	-	-
Days to Ship	8 Day(s) or more	8 Day(s) or more	17 Day(s) or more	17 Day(s) or more	13 Day(s) or more	17 Day(s) or more
Shank type	Double-stepped	Single-stepped	Single-stepped	Double-stepped	Double-stepped	Single-stepped
Tip shape	R	R	R	R	R	R
Jector	None	None	Standard type / Spring reinforced type	None	None	Standard type / Spring reinforced type
Material	Powdered high-speed steel	Powdered high-speed steel	SKD11 Equivalent / Powdered high-speed steel / Equivalent to SKH51	Powdered high-speed steel / Equivalent to SKH51	SKH51 Equivalent / Powdered high-speed steel	SKD11 Equivalent / Equivalent to SKH51
Heavy-load punches	No	No	No	No	No	No
Shank (mounting part) shape	Tapped	With key flat tap	Standard	Standard	Standard	Standard
Surface treatment	HW coating	HW coating	RX Coat	RX Coat	Without DLC foundation	RX Coat

Loading...