Torque Screwdrivers（Load direction：Left/Right）

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Ratchet Screwdriver Type, Both Left and Right Directions Can Be Measured

  KTC(KYOTO TOOL)

  【特長】
  ・ドライバタイプの簡単・高精度トルク計測ツールです。
  ・測定単位はcN・m、N・m（切替換算可能kgf・m、ozf・in、lbf・in、lbf・ft)です。
  ・素早く確実に極小トルク管理が可能です。
  ・メモリー件数は5件です。
  ・オートパワーオフ機能付です。
  【用途】
  ・極小トルクでのねじ締め付け作業。

  Product Type	Torque Adjustment Range (cN/m)	Tip Type	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	With or without idling function	Tip size / flathead (-) blade thickness (mm) B2	Torque Precision (±%)	Bit Individual Product, Set Product	Minimum gradation (cN·m)	Overall length (mm)	Load direction	Bit Overall Length	Bit Shank Diameter	Bit Quantity	Presence of magnet at the blade tip	Tip two-sided width size
  -	0.12 to 0.60 ～ 1.0 to 5.0	-	-	-	-	-	-	-	0.5 ～ 1	179	Left/Right	-	-	-	-	-

  From: ₹ 20,288.75
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dial type torque screwdriver

  TOHNICHI MFG

  [Features]
  · A torque screwdriver ideal for inspecting tightened screws.
  · There are scales to left and right for additional tightening and return torque inspection.
  · A set needle is equipped as standard, making it easy to read off maximum values.
  [Applications]
  · For inspection and tightening.

  Product Type	Torque Adjustment Range (cN/m)	Tip Type	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	With or without idling function	Tip size / flathead (-) blade thickness (mm) B2	Torque Precision (±%)	Bit Individual Product, Set Product	Minimum gradation (cN·m)	Overall length (mm)	Load direction	Bit Overall Length	Bit Shank Diameter	Bit Quantity	Presence of magnet at the blade tip	Tip two-sided width size
  Dial Type	-	-	-	-	NA	-	3	-	-	152 ～ 338	Left/Right	-	-	-	-	-

  From: ₹ 20,297.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Clutch Release Torque Screwdriver

  NAKAMURASEISAKU

  [Features]
  · When the predetermined torque value is reached, the clutch is automatically disengaged and starts idling, so there are no concerns about over-tightening.
  · Bit insertion port is now compatible with commercially available bits (hexagonal 6.35 mm). (Excluding N1.5LTDK, N3LTDK)
  · 2 (+) bits are included.
  [Applications]
  · For assembly of automobile components or home appliances.

  Product Type	Torque Adjustment Range (cN/m)	Tip Type	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	With or without idling function	Tip size / flathead (-) blade thickness (mm) B2	Torque Precision (±%)	Bit Individual Product, Set Product	Minimum gradation (cN·m)	Overall length (mm)	Load direction	Bit Overall Length	Bit Shank Diameter	Bit Quantity	Presence of magnet at the blade tip	Tip two-sided width size
  Preset	400 to 1000	-	-	-	Available	-	3	-	5	235	Left/Right	-	-	-	-	-

  From: ₹ 19,473.89
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Driver Digital Torque Set

  TONE

  [Features]
  · Digital torque measuring instrument (driver type) used by inserting the bit into the holder at the tip.
  · Equipped with buzzer sound and LED to warn against over-torquing.
  · Permissible values in the range of 50 to 95% can be set for the target torque.
  · With track mode and peak mode switching function.
  · Track mode displays the operational torque value in real time.
  · Peak mode displays the maximum operational torque value.
  · Supports both left and right rotation direction.
  · Compatible with 6.35 mm bit across TONE BT series.
  · Comes with a dedicated resin case.
  · Calibration certificate included.
  [Applications]
  · Tightening work with small torque.

  Product Type	Torque Adjustment Range (cN/m)	Tip Type	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	With or without idling function	Tip size / flathead (-) blade thickness (mm) B2	Torque Precision (±%)	Bit Individual Product, Set Product	Minimum gradation (cN·m)	Overall length (mm)	Load direction	Bit Overall Length	Bit Shank Diameter	Bit Quantity	Presence of magnet at the blade tip	Tip two-sided width size
  -	60 to 600	-	-	-	-	-	-	-	0.1	212	Left/Right	-	-	-	-	-

  From: ₹ 17,555.85
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wiha Torque-Setter (for TorqueVario®)

  WIHA

  Tool for setting TorqueVario® torque.
  
  [Features]
  · Tool for setting TorqueVario torque.
  · The handle is made of cellulose acetate so the surface does not slip in the hand even if wet with oil or water

  Product Type	Torque Adjustment Range (cN/m)	Tip Type	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	With or without idling function	Tip size / flathead (-) blade thickness (mm) B2	Torque Precision (±%)	Bit Individual Product, Set Product	Minimum gradation (cN·m)	Overall length (mm)	Load direction	Bit Overall Length	Bit Shank Diameter	Bit Quantity	Presence of magnet at the blade tip	Tip two-sided width size
  -	-	-	-	-	-	-	-	-	-	150	Left/Right	-	-	-	-	-

  From: ₹ 1,477.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Direct-read type torque screwdriver FTD

  TOHNICHI MFG

  [Features]
  · With pre-load function. As it applies torque with adjustment knob near the measurement point in advance, measurement is possible even with a tight rotating angle.
  · A torque screwdriver ideal for inspecting tightened screws.
  · There are scales to left and right for additional tightening and return torque inspection.
  · Can be securely used in the EU region as well. ISO 6789 Type I Class D calibration procedure compliant.
  [Applications]
  · For inspection and tightening.
  

  Product Type	Torque Adjustment Range (cN/m)	Tip Type	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	With or without idling function	Tip size / flathead (-) blade thickness (mm) B2	Torque Precision (±%)	Bit Individual Product, Set Product	Minimum gradation (cN·m)	Overall length (mm)	Load direction	Bit Overall Length	Bit Shank Diameter	Bit Quantity	Presence of magnet at the blade tip	Tip two-sided width size
  Dial Type	10 to 50 ～ 80 to 400	-	No.1 ～ No.2	7	-	0.7 ～ 0.9	3	-	1 ～ 10	215 ～ 263	Left/Right	-	-	-	-	-

  From: ₹ 20,262.76
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Product Type
Torque Adjustment Range (cN/m)
Tip Type
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
With or without idling function
Tip size / flathead (-) blade thickness (mm) B2
Torque Precision (±%)
Bit Individual Product, Set Product
Minimum gradation (cN·m)
Overall length (mm)
Load direction
Bit Overall Length
Bit Shank Diameter
Bit Quantity
Presence of magnet at the blade tip
Tip two-sided width size

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KTC(KYOTO TOOL)	TOHNICHI MFG	NAKAMURASEISAKU	TONE	WIHA	TOHNICHI MFG
Product Series	Digital Ratchet Screwdriver Type, Both Left and Right Directions Can Be Measured	Dial type torque screwdriver	[Kanon] Clutch Release Torque Screwdriver	Driver Digital Torque Set	Wiha Torque-Setter (for TorqueVario®)	Direct-read type torque screwdriver FTD
From	₹ 20,288.75	₹ 20,297.00	₹ 19,473.89	₹ 17,555.85	₹ 1,477.71	₹ 20,262.76
Days to Ship	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	9 Day(s) or more	5 Day(s) or more	6 Day(s) or more
Product Type	-	Dial Type	Preset	-	-	Dial Type
Torque Adjustment Range (cN/m)	0.12 to 0.60 ～ 1.0 to 5.0	-	400 to 1000	60 to 600	-	10 to 50 ～ 80 to 400
Tip Type	-	-	-	-	-	-
Tip size / Phillips (+)	-	-	-	-	-	No.1 ～ No.2
Tip size / flathead (-) blade width (mm) B1	-	-	-	-	-	7
With or without idling function	-	NA	Available	-	-	-
Tip size / flathead (-) blade thickness (mm) B2	-	-	-	-	-	0.7 ～ 0.9
Torque Precision (±%)	-	3	3	-	-	3
Bit Individual Product, Set Product	-	-	-	-	-	-
Minimum gradation (cN·m)	0.5 ～ 1	-	5	0.1	-	1 ～ 10
Overall length (mm)	179	152 ～ 338	235	212	150	215 ～ 263
Load direction	Left/Right	Left/Right	Left/Right	Left/Right	Left/Right	Left/Right
Bit Overall Length	-	-	-	-	-	-
Bit Shank Diameter	-	-	-	-	-	-
Bit Quantity	-	-	-	-	-	-
Presence of magnet at the blade tip	-	-	-	-	-	-
Tip two-sided width size	-	-	-	-	-	-

Loading...