Screwdrivers（Shaft type：Square）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Plate ratchet replacement screwdriver

  KTC(KYOTO TOOL)

  [Features]
  · Ratchet operation in both right and left directions is possible with switching lever.
  · Rapid rotation is possible by rotating the gear with the fingertips.
  · Can use 6.3 mm width across flats hex bits.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Combination	No.2 / No.3	-	-	Single Item / Set Product	Square	NA	-	-	Stainless Steel	-	4 ～ 6	-

  From: ₹ 1,492.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hex screwdriver 205 series

  PB SWISS TOOLS

  A screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.
  [Features]
  · It can be used for general applications. Recyclable clip. Boasts an extremely high finishing dimensional accuracy of 1/100 mm.
  · The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
  · The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
  · Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
  · Blade is nickel chrome-plated. Has excellent rust-resistance and long life.
  · The edge is lightly corner-cut, allowing the wrench to be easily inserted into screw holes.
  [Applications]
  · Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Hexagon	-	-	41 ～ 180	Single Item	Square	NA	NA	NA	Resin	-	0.89 ～ 8	-

  From: ₹ 1,008.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Micro Impact Screwdriver Set (7 Pcs.)

  TRAD

  Ideal for tightening and loosening screws with stripped heads or rusty screws. For detailed work that requires securing a screw or bolt with the stripe of a hammer of via torque.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	5.5	-	Set Product	Square	NA	NA	NA	-	-	5.5 ～ 8	-

  From: ₹ 1,286.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shaft Screwdriver (Through) KLD-M3

  TONE

  With a flathead tip of 1.0 x 9.0 and total length of 380 mm, it is ideal for work at places where standard long shaft screwdrivers cannot reach.
  [Features]
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  · Through-hole type.
  · Total length: 380 mm.
  · 275 mm shaft length.
  [Applications]
  · Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	9	275	Single Item	Square	Available	Available	NA	Resin	1	-	-

  From: ₹ 1,423.31
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Mini Ratchet Bit Driver

  SUEKAGE TOOL

  A compact design optimal for portability. The mini ratchet has a gear with 52 teeth, which results in a brisk rotation that increases work productivity. Includes a rotating plastic case that can be opened and closed compactly.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	5	-	Set Product	Square	NA	NA	NA	-	-	4 ～ 6	-

  From: ₹ 3,510.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Craft Form Plus Screwdriver

  WERA

  [Features]
  · The lasered tip provides exceptional bite into screws.
  · Special grip design provides an easy grip and comfortable fit.
  · Equipped with a bolster that can be firmly tightened with a wrench, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.0 / No.1 / No.2 / No.3	3.5 ～ 10	60 ～ 175	Single Item	Square	NA	NA	Included / NA	Rubber	-	-	-

  From: ₹ 1,169.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Quick Ball 60 Ratchet Screwdriver (Magnetic)

  ANEX

  [Features]
  ·60 gear teeth. Smooth rotation and excellent workability.
  ·A special minus shape that can be inserted into the removal hole of the wiring terminal.
  ·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
  ·A replaceable bit that can also be used as an electric bit.
  ·With magnet (bit).
  ·The elastomer resin and ball-shaped handle are easy to apply force.
  ·The insertion angle is 6.35 mm.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	95	Single Item	Square	Available	-	-	Rubber	-	-	-

  From: ₹ 1,318.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Resin Handle T-Shaped Torx® Screwdriver

  KTC(KYOTO TOOL)

  [Features]
  · Using the hexagon affixed to the base of the shaft, a wrench can be used to aid in turning.
  · Tip shape can be determined by size display on grip end.
  [Applications]
  · General purpose tool

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx	-	-	75 ～ 150	Single Item / Set Product	Square	NA	NA	Included	Resin	-	-	-

  From: ₹ 1,442.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phillips Screwdriver with Cap (SoftFinish ®)

  WIHA

  [Features]
  · With a hex bolster for wrenches.
  · Fixed screws can be hit with a hammer and loosened with the hexagonal blade passed through the handle and the strengthened steel cap construction.
  · The blade is made of high grade chrome vanadium molybdenum steel.
  · It has been quenched with a chrome plated finish.
  · ChromTop Processed Tip

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2	-	100	Single Item	Square	NA	Available	Included	Rubber	-	-	-

  From: ₹ 2,847.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Grip Screwdriver (Through)

  TONE

  [Features]
  · Ergonomic design
  · Designed to fit the hand for applying force easily.
  

  • Volume Discount

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	-	75 ～ 150	Single Item	Square	Available	Available	Included	Resin	-	-	-

  From: ₹ 747.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Through Screwdriver Set KD6

  TONE

  Square shaft through screwdriver.
  [Features]
  · 6-piece set. Plastic grip.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  • Volume Discount

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	4.9 ～ 9	76 ～ 153	Set Product	Square	Available	Available	NA	Resin	0.6 ～ 1	-	-

  From: ₹ 3,732.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  Stubby Screwdriver SSD-M2, Ultra Mini

  TONE

  Ultra mini flathead stubby screwdriver with an overall length of 70 mm.
  [Features]
  · The total length is short, making it ideal for working in narrow places.
  [Applications]
  · Ideal for automobile interiors, and maintenance of motorcycles, bicycles, and machinery.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	7.2	14	Single Item	Square	Available	NA	NA	Resin	0.8	-	-

  From: ₹ 498.58
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shaft Screwdriver Set (Through) KLD3

  TONE

  The overall length is as long as 380 mm, ideal for work in places not reachable by standard types. Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening. The tip has a high-strength magnet.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2 / No.3	9	275	Set Product	Square	Available	Available	NA	Resin	1	-	-

  From: ₹ 3,886.60
  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEGADORA Chisel Screwdriver No. 970

  VESSEL

  Heavy duty through type screwdriver that does not distort the cutting edge even when striking.
  [Features]
  · Utilizes special steel material for high-grade chisels.
  · Hardness of 58 HRC.
  · Pursues abrasion resistance and sharpness of the cutting edge.
  · Elastomer resin absorbs impacts to lessen hand fatigue.
  · Through type, with a large nut.
  · Carburized and quenched to minimize distortion of the nut.
  [Applications]
  · Processing and chipping of metals and rock.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	7	100	Single Item	Square	Available	Available	NA	Resin	1.5	-	-

  From: ₹ 1,040.74
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Master Grip Screwdriver Set DR-52

  ENGINEER

  Master grip screwdriver set equipped with frequently used magnetized strong bits.
  [Features]
  · Bit set that is also ideal for rechargeable or electric screwdrivers.
  · The bit is made of chrome vanadium steel.
  · Burette type bit holder for convenient mobility.
  · A cushioned grip which fits well into the hand.
  [Applications]
  · For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.0 / No.1 / No.2	6	-	Set Product	Square	Available	-	-	Rubber	-	-	-

  From: ₹ 2,229.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Offset Ratchet Driver (Straight Type)

  ANEX

  [Features]
  ·For screwdrivers in narrow spaces.
  ·Ultra-thin head 21 mm by adopting ultra-short bit.
  ·19 mm total length ultra-short bit.
  ·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
  ·Straight type.
  [Applications]
  ·For work such as removing screws in narrow spaces.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-) / Combination	No.1 / No.2 / No.3	6	-	Set Product	Square	NA	-	-	Stainless Steel	-	2.5 ～ 6	-

  From: ₹ 1,059.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball point hex screwdriver 206S series

  PB SWISS TOOLS

  A screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.
  [Features]
  · It can be used for general applications. Recyclable clip.
  · The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
  · The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
  · Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
  · With a precision ball point, screws on angled surfaces up to a 30° incline can be rotated.
  [Applications]
  · Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.
  * Cannot be used for final tightening.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Ballpoint	-	-	50 ～ 200	Single Item	Square	NA	NA	NA	Resin	-	1.27 ～ 10	-

  From: ₹ 1,487.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Ratchet driver DBR

  KTC(KYOTO TOOL)

  [Features]
  · The ratchet mechanism enables fast turning in both directions for loosening and tightening.
  · Fixing the ratchet allows it to be used as a normal screwdriver.
  [Applications]
  · General purpose tool

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Box / Combination	No.1 / No.2 / No.3	5.5 ～ 8	-	Set Product	Square	NA	-	-	Rubber	-	1.5 ～ 10	-

  From: ₹ 3,619.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Resin Handle Ball-Point Hex Screwdriver

  KTC(KYOTO TOOL)

  [Features]
  · Using the hexagon affixed to the base of the shaft, a wrench can be used to aid in turning.
  · Tip shape can be determined by size display on grip end.
  [Applications]
  · General purpose tool

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Ballpoint	-	-	75 ～ 150	Single Item / Set Product	Square	NA	NA	Included	Resin	-	1.5 ～ 8	1/4 ～ 9/64

  From: ₹ 1,552.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ratchet Driver Set RDS32

  TONE

  Full set containing screwdriver type handles and tip replacement bits.
  [Features]
  · Screwdriver-type handles with built-in ratchet mechanism are available in 3 types.
  · There are 32 types of replaceable tip bits.
  · A full set of screwdrivers that also accommodates 3 types of extension bit holders.
  [Applications]
  · A complete set ideal for tightening/loosening flathead / Phillips head screws and hexagon socket bolts.
  · Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	5.5 ～ 8	-	Set Product	Square	Available	-	-	Resin	-	-	-

  From: ₹ 10,818.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi Driver

  TRUSCO NAKAYAMA

  This is a universal type switchable screwdriver that can use bits for electric screwdrivers. The cushion handle resists slipping, even when work gloves are worn.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	6	-	Set Product	Square	NA	-	-	Rubber	-	-	-

  From: ₹ 812.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Telescopic Screwdriver Set

  PB SWISS TOOLS

  · ESD type ideal for working with weak currents.
  · Electrostatic discharge (ESD): Suited overall for work locations which could involve danger or injury due to electrification or discharge of static electricity.
  · The ESD tool grip ensures a safe discharge of static electricity.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-) / Combination	-	-	-	Set Product	Square	-	-	-	-	-	-	-

  From: ₹ 4,320.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Grip Screwdriver Set PLPGD7

  TONE

  [Features]
  · New form and materials provide an ergonomic driver that is easier to grip and turn.
  · Parallel tip shape prevents damage to screw head slots.
  · Original Phillips head screwdriver tip shape fits perfectly to prevent tip extending to the bottom of the screw head slot.
  · (PGPD-002, 003) Utilizes double-structure resin in red for the Phillips head screwdriver and gray for the straight slotted screwdriver so they are distinguishable at a glance.
  Excellent workability.
  · Tip is equipped with a strong magnet.
  · Tray size inserts inside existing tool cases.
  

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	-	75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)	Set Product	Square	Available	Available	Included	Resin	-	-	-

  From: ₹ 5,525.42
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Piercing Screwdriver KPD-001

  TONE

  Square shaft through screwdriver.
  [Features]
  · Plastic grip.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.1	-	76	Single Item	Square	Available	Available	NA	Resin	-	-	-

  From: ₹ 586.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Piercing Screwdriver KPD-003

  TONE

  A piercing square-shafted driver with a plastic grip.
  [Features]
  · Phillips shaft length: 150 mm, total length: 260 mm.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Convenient for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.3	-	153	Single Item	Square	Available	Available	NA	Resin	-	-	-

  From: ₹ 966.64
  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shaft Screwdriver (Through) KLD-P

  TONE

  Ideal for work at places where standard long shaft screwdrivers cannot reach.
  [Features]
  · Cross-recessed end +No.2, total length 380 mm.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · A through type with magnetic tip with axial length of 275 mm.
  [Applications]
  · Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2 / No.3	-	275	Single Item	Square	Available	Available	NA	Resin	-	-	-

  From: ₹ 1,423.31
  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Stubby Screwdriver SD-M

  TONE

  Flathead stubby screwdriver with an overall length of 70 mm.
  [Features]
  · The total length is short, making it ideal for working in narrow places.
  [Applications]
  · Automobile interiors, and maintenance of motorcycles, bicycles, and machinery.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	7.2	23	Single Item	Square	Available	NA	NA	Resin	0.8	-	-

  From: ₹ 517.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Impact Screwdriver D-963

  HOZAN

  Impact screwdriver with interchangeable left and right rotation.
  [Features]
  · Driver bit rotates at high torque when hit with a hammer, loosening rusted screws easily.
  · Protective grip with collar to protect the hand holding the driver.
  · A 12.7 mm square socket can be attached by removing the bit holder.
  · Case included
  [Applications]
  · Ideal for turning screws that are difficult to loosen.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2 / No.3 / No.4	10	36 ～ 80	Set Product	Square	NA	-	-	Rubber	-	-	-

  From: ₹ 7,052.84
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Stubby Screwdriver SD-P

  TONE

  Phillips stubby screwdriver with an overall length of 70 mm.
  [Features]
  · The total length is short, making it ideal for working in narrow places.
  · Includes magnet.
  · A square shaft screwdriver.
  [Applications]
  · Automobile interiors, and maintenance of motorcycles, bicycles, and machinery.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2	-	23	Single Item	Square	Available	NA	NA	Resin	-	-	-

  From: ₹ 467.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Piercing Screwdriver KMD-075

  TONE

  Square shaft through screwdriver.
  [Features]
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  · Plastic grip.
  [Applications]
  · Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	4.9	76	Single Item	Square	Available	Available	NA	Resin	0.6	-	-

  From: ₹ 586.04
  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Piercing Screwdriver KMD-150

  TONE

  A piercing square-shafted driver with a plastic grip.
  [Features]
  · Plastic grip.
  · Flathead shaft length: 150 mm, total length: 260 mm.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	9	153	Single Item	Square	Available	Available	NA	Resin	1	-	-

  From: ₹ 966.64
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Piercing Screwdriver KPD-002

  TONE

  A piercing square-shafted driver with a plastic grip.
  [Features]
  · Plastic grip.
  · Phillips shaft length: 100 mm, total length: 195 mm.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2	-	102	Single Item	Square	Available	Available	NA	Resin	-	-	-

  From: ₹ 731.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Piercing Screwdriver KMD-100

  TONE

  Square shaft through screwdriver.
  [Features]
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · Plastic grip.
  · The tip has a high-strength magnet.
  [Applications]
  · Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	6	102	Single Item	Square	Available	Available	NA	Resin	0.8	-	-

  From: ₹ 731.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Ultra Mini Stubby Screwdriver

  TONE

  Screwdriver of a type even shorter than the stubby screwdriver.
  [Features]
  · Ultra short screwdriver.
  · 14 mm shaft length.
  · Total length: 30 mm.
  [Applications]
  · Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  • Volume Discount

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.1 / No.2	-	14	Single Item	Square	Available	NA	NA	Resin	-	-	-

  From: ₹ 323.00
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Ultra Mini Stubby Screwdriver Set SSD-2

  TONE

  Ultra mini stubby screwdriver with an overall length of 30 mm.
  [Features]
  · As the total length is even shorter than the stubby screwdriver, it is ideal for working in narrow places.
  [Applications]
  · Ideal for automobile interiors, and maintenance of motorcycles, bicycles, and machinery.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	7.2	14	Set Product	Square	Available	NA	NA	Resin	0.8	-	-

  From: ₹ 953.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hex Driver DH

  ENGINEER

  Screwdriver with hexagonal tip.
  [Features]
  · Sizes available for any size hex socket screw.
  · The shaft is chrome-molybdenum steel.
  [Applications]
  · For tightening and removing hex socket screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Hexagon	-	-	90	Single Item	Square	NA	NA	NA	Resin	-	2.5	-

  From: ₹ 132.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Superfit Precision Ball Point Screwdriver

  ANEX

  [Features]
  · A high-strength type with an elastomer resin handle.
  · A precision screwdriver with a long shaft.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Ballpoint	-	-	75	Single Item	Square	NA	NA	NA	Resin	-	1.5 ～ 3	-

  From: ₹ 526.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Superfit Double-Ended Precision Replacement Screwdriver Set

  ANEX

  [Features]
  · A high-strength type with an elastomer resin handle.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.000 / No.00 / No.0 / No.1	1.8 ～ 3	-	Set Product	Square	NA	-	-	Resin	-	-	-

  From: ₹ 1,564.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Superfit Double-Ended Precision Replacement Hexalobular Screwdriver Set

  ANEX

  [Features]
  · A high-strength type with an elastomer resin handle.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx	-	-	-	Set Product	Square	NA	-	-	Resin	-	-	-

  From: ₹ 1,618.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Replacement Power Screwdriver (Incorporating Magnet)

  ANEX

  [Features]
  · A replacement type screwdriver which can be used with a screwdriver bit (subtense 6.35 mm hex shaft).
  · The rear end of the handle can be used for turning eye bolts and thumb screws.
  · The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
  [Applications]
  · + No. 2, -6 screwdriver
  · Piston Rotation
  · Wiring remover to be inserted in the terminal removing hole

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	135	Single Item	Square	Available	-	-	Rubber	-	-	-

  From: ₹ 672.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Super Action Grip Screwdriver

  ANEX

  [Features]
  ·Suitable for removing screws that require force.
  ·A single screwdriver can be used in two different ways: straight and T-shaped.
  ·You can easily switch from a T shape to a straight shape (or vice versa) with a single touch.
  ·T shape: For initial loosening and retightening that requires force.
  ·Straight type: For normal screwdrivers (fast turning).
  ·Bit replacement formula.
  ·With magnet (bit).
  ・ With storage case.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	6	-	Set Product	Square	NA	-	-	Resin	-	4 ～ 6	-

  From: ₹ 4,229.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  "NEJIPITA Ratchet Screwdriver" (Magnetic)

  ANEX

  [Features]
  · A single ratchet driver capable of turning 4 types of screws, (+) No.1, (+) No.2, (+) No. 3 and (-) 6.
  · The ratchet mechanism makes it possible to fasten screws with one hand.
  [Applications]
  · For screw removal work, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	6	28	Set Product	Square	Available	-	-	Rubber	-	-	-

  From: ₹ 844.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Offset Ratchet Screwdriver (Bent-Up Head Type)

  ANEX

  [Features]
  · Uses an ultra-thin type head ratchet structure for convenient work in a tight workspace.
  · Magnet type chucking enables easy attachment and detachment of bits.
  [Applications]
  · For screw removal work in narrow places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-) / Combination	No.1 / No.2 / No.3	6	-	Set Product	Square	NA	-	-	Stainless Steel	-	2.5 ～ 6	-

  From: ₹ 941.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  Impact Screwdriver Bit

  ANEX

  [Features]
  ·Compatible with 8 mm hexagonal shaft and single-headed bits.
  ·Bits for manual impact drivers.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	10	-	Single Item	Square	NA	-	-	-	1.6	-	-

  From: ₹ 302.01
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic)

  HIRAI KOGU

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2 / No.3	6 ～ 8	100 ～ 150	Single Item	Square	Available	Available	NA	Resin	0.9 ～ 1.1	-	-

  From: ₹ 486.91
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
Shaft length L (mm)
Single Product/Set Classification
Shaft type
Magnet
Shaft through
Bolster
Grip Type
Tip size / flathead (-) blade thickness (mm) B2
(Box/Hex/Ball-Point) Width Across Flats (mm)
(Box/Hex/Ball-Point) Width Across Flats (inch)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KTC(KYOTO TOOL)	PB SWISS TOOLS	TRAD	TONE	SUEKAGE TOOL	WERA	ANEX	KTC(KYOTO TOOL)	WIHA	TONE	TONE	TONE	TONE	VESSEL	ENGINEER	ANEX	PB SWISS TOOLS	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	TONE	TRUSCO NAKAYAMA	PB SWISS TOOLS	TONE	TONE	TONE	TONE	TONE	HOZAN	TONE	TONE	TONE	TONE	TONE	TONE	TONE	ENGINEER	ANEX	ANEX	ANEX	ANEX	ANEX	ANEX	ANEX	ANEX	HIRAI KOGU
Product Series	Plate ratchet replacement screwdriver	Hex screwdriver 205 series	Micro Impact Screwdriver Set (7 Pcs.)	Long Shaft Screwdriver (Through) KLD-M3	Mini Ratchet Bit Driver	Craft Form Plus Screwdriver	Quick Ball 60 Ratchet Screwdriver (Magnetic)	Resin Handle T-Shaped Torx® Screwdriver	Phillips Screwdriver with Cap (SoftFinish ®)	Power Grip Screwdriver (Through)	Through Screwdriver Set KD6	Stubby Screwdriver SSD-M2, Ultra Mini	Long Shaft Screwdriver Set (Through) KLD3	MEGADORA Chisel Screwdriver No. 970	Master Grip Screwdriver Set DR-52	Offset Ratchet Driver (Straight Type)	Ball point hex screwdriver 206S series	Ratchet driver DBR	Resin Handle Ball-Point Hex Screwdriver	Ratchet Driver Set RDS32	Multi Driver	Telescopic Screwdriver Set	Power Grip Screwdriver Set PLPGD7	Piercing Screwdriver KPD-001	Piercing Screwdriver KPD-003	Long Shaft Screwdriver (Through) KLD-P	Stubby Screwdriver SD-M	Impact Screwdriver D-963	Stubby Screwdriver SD-P	Piercing Screwdriver KMD-075	Piercing Screwdriver KMD-150	Piercing Screwdriver KPD-002	Piercing Screwdriver KMD-100	Ultra Mini Stubby Screwdriver	Ultra Mini Stubby Screwdriver Set SSD-2	Hex Driver DH	Superfit Precision Ball Point Screwdriver	Superfit Double-Ended Precision Replacement Screwdriver Set	Superfit Double-Ended Precision Replacement Hexalobular Screwdriver Set	Replacement Power Screwdriver (Incorporating Magnet)	Super Action Grip Screwdriver	"NEJIPITA Ratchet Screwdriver" (Magnetic)	Offset Ratchet Screwdriver (Bent-Up Head Type)	Impact Screwdriver Bit	Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic)
From	₹ 1,492.02	₹ 1,008.91	₹ 1,286.62	₹ 1,423.31	₹ 3,510.91	₹ 1,169.04	₹ 1,318.24	₹ 1,442.87	₹ 2,847.89	₹ 747.00	₹ 3,732.00	₹ 498.58	₹ 3,886.60	₹ 1,040.74	₹ 2,229.47	₹ 1,059.89	₹ 1,487.07	₹ 3,619.16	₹ 1,552.71	₹ 10,818.64	₹ 812.02	₹ 4,320.35	₹ 5,525.42	₹ 586.04	₹ 966.64	₹ 1,423.31	₹ 517.42	₹ 7,052.84	₹ 467.85	₹ 586.04	₹ 966.64	₹ 731.65	₹ 731.65	₹ 323.00	₹ 953.53	₹ 132.00	₹ 526.45	₹ 1,564.22	₹ 1,618.75	₹ 672.96	₹ 4,229.25	₹ 844.40	₹ 941.73	₹ 302.01	₹ 486.91
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	9 Day(s) or more	10 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	10 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more
Tip standards	Phillips (+) / Combination	Hexagon	Combination	Flathead (-)	Combination	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Torx	Phillips (+)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Flathead (-)	Phillips (+)/Flathead(-)	Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-) / Combination	Ballpoint	Box / Combination	Ballpoint	Combination	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-) / Combination	Phillips (+)/Flathead(-)	Phillips (+)	Phillips (+)	Phillips (+)	Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)	Flathead (-)	Flathead (-)	Phillips (+)	Flathead (-)	Phillips (+)	Phillips (+)/Flathead(-)	Hexagon	Ballpoint	Phillips (+)/Flathead(-)	Torx	Phillips (+)/Flathead(-)	Combination	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-) / Combination	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)
Tip size / Phillips (+)	No.2 / No.3	-	No.1 / No.2	-	No.1 / No.2 / No.3	No.0 / No.1 / No.2 / No.3	No.2	-	No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3	-	No.2 / No.3	-	No.0 / No.1 / No.2	No.1 / No.2 / No.3	-	No.1 / No.2 / No.3	-	No.1 / No.2 / No.3	No.1 / No.2 / No.3	-	No.1 / No.2 / No.3	No.1	No.3	No.2 / No.3	-	No.2 / No.3 / No.4	No.2	-	-	No.2	-	No.1 / No.2	No.2	-	-	No.000 / No.00 / No.0 / No.1	-	No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.2 / No.3
Tip size / flathead (-) blade width (mm) B1	-	-	5.5	9	5	3.5 ～ 10	6	-	-	-	4.9 ～ 9	7.2	9	7	6	6	-	5.5 ～ 8	-	5.5 ～ 8	6	-	-	-	-	-	7.2	10	-	4.9	9	-	6	-	7.2	-	-	1.8 ～ 3	-	6	6	6	6	10	6 ～ 8
Shaft length L (mm)	-	41 ～ 180	-	275	-	60 ～ 175	95	75 ～ 150	100	75 ～ 150	76 ～ 153	14	275	100	-	-	50 ～ 200	-	75 ～ 150	-	-	-	75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)	76	153	275	23	36 ～ 80	23	76	153	102	102	14	14	90	75	-	-	135	-	28	-	-	100 ～ 150
Single Product/Set Classification	Single Item / Set Product	Single Item	Set Product	Single Item	Set Product	Single Item	Single Item	Single Item / Set Product	Single Item	Single Item	Set Product	Single Item	Set Product	Single Item	Set Product	Set Product	Single Item	Set Product	Single Item / Set Product	Set Product	Set Product	Set Product	Set Product	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Single Item	Set Product	Set Product	Single Item	Set Product	Set Product	Set Product	Single Item	Single Item
Shaft type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Magnet	NA	NA	NA	Available	NA	NA	Available	NA	NA	Available	Available	Available	Available	Available	Available	NA	NA	NA	NA	Available	NA	-	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	NA	NA	NA	NA	Available	NA	Available	NA	NA	Available
Shaft through	-	NA	NA	Available	NA	NA	-	NA	Available	Available	Available	NA	Available	Available	-	-	NA	-	NA	-	-	-	Available	Available	Available	Available	NA	-	NA	Available	Available	Available	Available	NA	NA	NA	NA	-	-	-	-	-	-	-	Available
Bolster	-	NA	NA	NA	NA	Included / NA	-	Included	Included	Included	NA	NA	NA	NA	-	-	NA	-	Included	-	-	-	Included	NA	NA	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	NA	NA	-	-	-	-	-	-	-	NA
Grip Type	Stainless Steel	Resin	-	Resin	-	Rubber	Rubber	Resin	Rubber	Resin	Resin	Resin	Resin	Resin	Rubber	Stainless Steel	Resin	Rubber	Resin	Resin	Rubber	-	Resin	Resin	Resin	Resin	Resin	Rubber	Resin	Resin	Resin	Resin	Resin	Resin	Resin	Resin	Resin	Resin	Resin	Rubber	Resin	Rubber	Stainless Steel	-	Resin
Tip size / flathead (-) blade thickness (mm) B2	-	-	-	1	-	-	-	-	-	-	0.6 ～ 1	0.8	1	1.5	-	-	-	-	-	-	-	-	-	-	-	-	0.8	-	-	0.6	1	-	0.8	-	0.8	-	-	-	-	-	-	-	-	1.6	0.9 ～ 1.1
(Box/Hex/Ball-Point) Width Across Flats (mm)	4 ～ 6	0.89 ～ 8	5.5 ～ 8	-	4 ～ 6	-	-	-	-	-	-	-	-	-	-	2.5 ～ 6	1.27 ～ 10	1.5 ～ 10	1.5 ～ 8	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2.5	1.5 ～ 3	-	-	-	4 ～ 6	-	2.5 ～ 6	-	-
(Box/Hex/Ball-Point) Width Across Flats (inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1/4 ～ 9/64	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...