Carbide Taper End Mills（work material：Cast Iron）

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / regular

  MISUMI

  [Features]
  ·Adoption of 4-flute shape makes it ideal for machining sloped side surfaces
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	Cast Iron[○]	12 ～ 35	-	4	4 ～ 16	60 ～ 90	For High Hardness (Silicon Group)

  From: ₹ 4,050.65
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type FX-MG-TPDS

  OSG

  FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 12	Tapered square	Cast Iron[◎]	2 ～ 40	-	2	3 ～ 20	40 ～ 120	TiAlN

  From: ₹ 9,573.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper Ball End Type FXS-RB-TPB

  OSG

  A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for automobile curved surfaces.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	Cast Iron[◎]	4 ～ 25	0.3 ～ 1.25	multi-edged	3 ～ 6	35 ～ 60	TiAlN

  From: ₹ 14,136.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Tapered End Mill (Long) CSTEL

  EIKOSHA

  [Features]
  · 2-flute carbide solid tapered end mill.
  · Long blade.
  · For wall tapering.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	1 ～ 6	Tapered square	Cast Iron[◎]	10 ～ 35	-	2	4 ～ 12	50 ～ 90	Non-Coated

  From: ₹ 8,217.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 2-flute / regular model

  MISUMI

  [Features]
  ·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 30	0.5 ～ 6	Tapered square	Cast Iron[○]	2 ～ 24	-	2	4 ～ 12	50 ～ 70	For High Hardness (Silicon Group)

  From: ₹ 3,289.91
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute

  MISUMI

  [Features]
  ·Essential item for plastic runner fluting
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5 ～ 15	1.5 ～ 4	Tapered radius	Cast Iron[○]	3 ～ 6.5	0 ～ 1	2	4 ～ 8	40 ～ 50	For High Hardness (Silicon Group)

  From: ₹ 4,099.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper End Type FXS-RB-TPE

  OSG

  A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for processing side surfaces.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	0.4 ～ 3	Tapered square	Cast Iron[◎]	2 ～ 40	-	multi-edged	3 ～ 8	35 ～ 80	TiAlN

  From: ₹ 10,359.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper Ball End Mill

  EIKOSHA

  A tapered ball end mill that uses cemented carbide, making it ideal for profiling the curved surface of molds.
  [Features]
  ·Compared to high-speed steel, carbide is used, so heat resistance and wear resistance are greatly improved compared to powdered high-speed steel.
  ·Ideal for mold curved surface machining and profiling. Simultaneous processing of draft angle is possible.
  [Applications]
  ·Used for mold processing, etc.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	-	Taper ball	Cast Iron[◎]	4 ～ 40	0.5 ～ 8	2	4 ～ 25	45 ～ 90	Non-Coated

  From: ₹ 7,268.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Long Taper Ball End Mill

  EIKOSHA

  Taper ball end mill long type using carbide.
  [Features]
  ·Compared to high-speed steel, carbide is used, so heat resistance and wear resistance are greatly improved compared to powdered high-speed steel.
  ·Ideal for mold curved surface machining and profiling. Simultaneous processing of draft angle is possible.
  [Applications]
  ·Ideal for curved surface processing of molds, etc.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	-	Taper ball	Cast Iron[○]	6 ～ 50	0.5 ～ 5	2	4 ～ 25	55 ～ 150	Non-Coated

  From: ₹ 8,633.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSRTN

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0°50' ～ 1°	2 ～ 16	Tapered radius	Cast Iron[○]	3 ～ 24	0.5 ～ 3	3	6 ～ 20	70 ～ 220	-

  From: ₹ 12,873.27
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Tapered End Mill CSTE

  EIKOSHA

  Carbide tapered square end mill (carbide).
  [Features]
  · End mill with a tapered blade for machining of inclined parts.
  [Applications]
  · Optimal for milling taper parts.
  · Optimal for tapered-wall machining.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	0.5 ～ 16	Tapered square	Cast Iron[◎]	2 ～ 65	-	2	3 ～ 32	35 ～ 140	Non-Coated

  From: ₹ 5,844.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / for deep ribbing

  MISUMI

  [Features]
  ·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 4 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.4 ～ 2	Tapered square	Cast Iron[○]	2 ～ 12	-	4	3 ～ 4	40 ～ 50	For High Hardness (Silicon Group)

  From: ₹ 4,066.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered ball end mill, 4-flute / long model

  MISUMI

  [Features]
  ·Blade length can be selected according to depth of rib groove (Choose shortest blade length possible to maintain rigid)
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	Cast Iron[○]	4 ～ 30	0.3 ～ 1.25	4	4 ～ 6	45 ～ 70	For High Hardness (Silicon Group)

  From: ₹ 4,657.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute

  MISUMI

  [Features]
  ·Essential item for plastic runner fluting
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5 ～ 15	-	Taper ball	Cast Iron[○]	3 ～ 7	1 ～ 3	2	4 ～ 10	40 ～ 75	For High Hardness (Silicon Group)

  From: ₹ 4,709.67
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model

  MISUMI

  [Features]
  ·R of tip is also effective in suppressing chipping
  ·Half-moon shape with good discharge of cutting chip even with small diameter
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  -	-	Taper ball	Cast Iron[○]	-	0.1 ～ 0.3	1	4	45	For High Hardness (Silicon Group)

  From: ₹ 3,088.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type MG-TPDS

  OSG

  High toughness carbide alloy is used, providing a long service life at medium to low speeds

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	1 ～ 12	Tapered square	Cast Iron[○]	5 ～ 40	-	2	4 ～ 20	45 ～ 110	Non-Coated

  From: ₹ 8,788.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-flute, Tapered Blade, Short Type MG-TPMS

  OSG

  High toughness carbide alloy is used, providing a long service life at medium to low speeds

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	2 ～ 12	Tapered square	Cast Iron[○]	8 ～ 30	-	4	4 ～ 12	45 ～ 90	Non-Coated

  From: ₹ 9,633.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mill (Trapezoidal Runner) MG-TRC

  OSG

  Tapered blade end mill that can be used for trapezoidal runner processing. High toughness carbide alloy is used.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	Cast Iron[○]	4 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: ₹ 10,056.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, taper type with corner rounding FXS-RB-TPCR

  OSG

  A radius end type high-rigidity taper end mill which enables rib grooves to be machined with high efficiency.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 1.5	1 ～ 1.5	Tapered radius	Cast Iron[◎]	8 ～ 12	0.2	multi-edged	4	45	TiAlN

  From: ₹ 12,657.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CTE 2000, UT Coat, 2-Flute Tapered

  UNION TOOL

  [Features]
  · 2-flute taper end mill with extensive variations from taper half angle of 30' to 15°

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	0.2 ～ 2.5	Tapered square	Cast Iron[○]	0.8 ～ 8	-	2	3 ～ 8	38 ～ 50	TiCN

  From: ₹ 4,727.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CTE 4000, UT Coat, 4-Flute Tapered

  UNION TOOL

  [Features]
  · Taper end mill with extensive variations from taper half angle of 30' to 7°

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	3 ～ 10	Tapered square	Cast Iron[○]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	TiCN

  From: ₹ 5,627.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper End Mill (Medium)

  EIKOSHA

  Taper square end mill with strong hardness (carbide).
  [Features]
  ·Tapered edge shape for machining inclined parts with equal helix.
  [Applications]
  ·Ideal for taper milling.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	0.5 ～ 10	Tapered square	Cast Iron[◎]	4 ～ 40	-	2	3 ～ 25	40 ～ 110	Non-Coated

  From: ₹ 5,961.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball Long Type DZ-OCLB-T

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0°57' ～ 2°52'	4 ～ 12	Taper ball	Cast Iron[◎]	10 ～ 33	2 ～ 6	2	10 ～ 16	160 ～ 280	TiAlN

  From: ₹ 20,711.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered Neck Ball End Mill KTBL-2

  KYOWA SEIKO

  The neck has a taper for a longer effective length. Ideal for deep engraving.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  -	0.2 ～ 6	Taper ball	Cast Iron[◎]	0.4 ～ 14	0.1 ～ 3	-	6 ～ 8	100 ～ 120	Non-Coated

  From: ₹ 10,674.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Short MG-TPBDS

  OSG

  Cemented carbide is used for the blade material.
  Blade length (mm) 10
  Corner/ball radius (mm) 1.25, single angle (°) 5
  Big end diameter (mm) 4.04, number of flutes (pcs.) 2
  Shank diameter (mm) 6, overall length (mm) 45

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5	-	Taper ball	Cast Iron[○]	10	-	-	6	45	Non-Coated

  From: ₹ 12,794.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Single corner (θ)(Degree)
Tip diameter (D)(φ)
Type
work material
Blade length (l)(mm)
R Size(mm)
Number of flutes(sheet)
Shank diameter (d)(mm)
Overall Length (L)(mm)
Coating

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	OSG	OSG	EIKOSHA	MISUMI	MISUMI	OSG	EIKOSHA	EIKOSHA	DIJET	EIKOSHA	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	EIKOSHA	DIJET	KYOWA SEIKO	OSG
Product Series	TSC series carbide tapered end mill, 4-flute / regular	2-flute, Tapered Blade, Short Type FX-MG-TPDS	For Rib Grooves, Taper Ball End Type FXS-RB-TPB	Carbide Solid Tapered End Mill (Long) CSTEL	TSC series carbide tapered end mill, 2-flute / regular model	TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute	For Rib Grooves, Taper End Type FXS-RB-TPE	Carbide Solid Taper Ball End Mill	Carbide Solid Long Taper Ball End Mill	One Cut Super Radius End Mill DV-OCSRTN	Carbide Solid Tapered End Mill CSTE	TSC series carbide tapered end mill, 4-flute / for deep ribbing	TSC series carbide tapered ball end mill, 4-flute / long model	TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute	TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model	2-flute, Tapered Blade, Short Type MG-TPDS	4-flute, Tapered Blade, Short Type MG-TPMS	Carbide End Mill (Trapezoidal Runner) MG-TRC	For Rib Grooves, taper type with corner rounding FXS-RB-TPCR	C-CTE 2000, UT Coat, 2-Flute Tapered	C-CTE 4000, UT Coat, 4-Flute Tapered	Carbide Solid Taper End Mill (Medium)	One Cut Ball Long Type DZ-OCLB-T	Carbide Tapered Neck Ball End Mill KTBL-2	2-flute Short MG-TPBDS
From	₹ 4,050.65	₹ 9,573.00	₹ 14,136.31	₹ 8,217.55	₹ 3,289.91	₹ 4,099.58	₹ 10,359.22	₹ 7,268.29	₹ 8,633.49	₹ 12,873.27	₹ 5,844.13	₹ 4,066.55	₹ 4,657.15	₹ 4,709.67	₹ 3,088.38	₹ 8,788.11	₹ 9,633.27	₹ 10,056.53	₹ 12,657.62	₹ 4,727.07	₹ 5,627.13	₹ 5,961.62	₹ 20,711.40	₹ 10,674.95	₹ 12,794.24
Days to Ship	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more
Specifications	TS General Steel 4 Flutes R (Regular)				TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes						TS General Steel 4 Flutes	TS General Steel 4 Flutes L (Long)	TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)
Single corner (θ)(Degree)	0.5 ～ 5	0.5 ～ 20	0.5 ～ 2	1ﾟ ～ 30'	0.5 ～ 30	5 ～ 15	0.5 ～ 3	1ﾟ ～ 30'	1ﾟ ～ 30'	0°50' ～ 1°	1ﾟ ～ 30'	0.5 ～ 2	0.5 ～ 2	5 ～ 15	-	0.5 ～ 7	0.5 ～ 3	7 ～ 15	0.5 ～ 1.5	0.5 ～ 15	0.5 ～ 7	1ﾟ ～ 30'	0°57' ～ 2°52'	-	5
Tip diameter (D)(φ)	3 ～ 10	0.5 ～ 12	-	1 ～ 6	0.5 ～ 6	1.5 ～ 4	0.4 ～ 3	-	-	2 ～ 16	0.5 ～ 16	0.4 ～ 2	-	-	-	1 ～ 12	2 ～ 12	2 ～ 6	1 ～ 1.5	0.2 ～ 2.5	3 ～ 10	0.5 ～ 10	4 ～ 12	0.2 ～ 6	-
Type	Tapered square	Tapered square	Taper ball	Tapered square	Tapered square	Tapered radius	Tapered square	Taper ball	Taper ball	Tapered radius	Tapered square	Tapered square	Taper ball	Taper ball	Taper ball	Tapered square	Tapered square	Tapered square	Tapered radius	Tapered square	Tapered square	Tapered square	Taper ball	Taper ball	Taper ball
work material	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]
Blade length (l)(mm)	12 ～ 35	2 ～ 40	4 ～ 25	10 ～ 35	2 ～ 24	3 ～ 6.5	2 ～ 40	4 ～ 40	6 ～ 50	3 ～ 24	2 ～ 65	2 ～ 12	4 ～ 30	3 ～ 7	-	5 ～ 40	8 ～ 30	4 ～ 12	8 ～ 12	0.8 ～ 8	10 ～ 35	4 ～ 40	10 ～ 33	0.4 ～ 14	10
R Size(mm)	-	-	0.3 ～ 1.25	-	-	0 ～ 1	-	0.5 ～ 8	0.5 ～ 5	0.5 ～ 3	-	-	0.3 ～ 1.25	1 ～ 3	0.1 ～ 0.3	-	-	-	0.2	-	-	-	2 ～ 6	0.1 ～ 3	-
Number of flutes(sheet)	4	2	multi-edged	2	2	2	multi-edged	2	2	3	2	4	4	2	1	2	4	2	multi-edged	2	4	2	2	-	-
Shank diameter (d)(mm)	4 ～ 16	3 ～ 20	3 ～ 6	4 ～ 12	4 ～ 12	4 ～ 8	3 ～ 8	4 ～ 25	4 ～ 25	6 ～ 20	3 ～ 32	3 ～ 4	4 ～ 6	4 ～ 10	4	4 ～ 20	4 ～ 12	4 ～ 12	4	3 ～ 8	6 ～ 16	3 ～ 25	10 ～ 16	6 ～ 8	6
Overall Length (L)(mm)	60 ～ 90	40 ～ 120	35 ～ 60	50 ～ 90	50 ～ 70	40 ～ 50	35 ～ 80	45 ～ 90	55 ～ 150	70 ～ 220	35 ～ 140	40 ～ 50	45 ～ 70	40 ～ 75	45	45 ～ 110	45 ～ 90	45 ～ 75	45	38 ～ 50	50 ～ 90	40 ～ 110	160 ～ 280	100 ～ 120	45
Coating	For High Hardness (Silicon Group)	TiAlN	TiAlN	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	-	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiCN	TiCN	Non-Coated	TiAlN	Non-Coated	Non-Coated

Loading...