Carbide Taper End Mills（work material：Quenched and tempered steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / regular

  MISUMI

  [Features]
  ·Adoption of 4-flute shape makes it ideal for machining sloped side surfaces
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	12 ～ 35	-	4	4 ～ 16	60 ～ 90	For High Hardness (Silicon Group)

  From: ₹ 4,050.65
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type FX-MG-TPDS

  OSG

  FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 12	Tapered square	Quenched and tempered steel[◎]	2 ～ 40	-	2	3 ～ 20	40 ～ 120	TiAlN

  From: ₹ 9,573.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Reverse Cutter (Carbide Solid Reverse Taper End Mill)

  EIKOSHA

  Reverse tapering, uniform torsion (high-efficiency and high-accuracy)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	2 ～ 12	Tapered radius	Quenched and tempered steel[○]	3 ～ 25	0.3 ～ 0.5	2	3 ～ 12	40 ～ 70	Non-Coated

  From: ₹ 7,799.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Tapered End Mill (Long) CSTEL

  EIKOSHA

  [Features]
  · 2-flute carbide solid tapered end mill.
  · Long blade.
  · For wall tapering.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	1 ～ 6	Tapered square	Quenched and tempered steel[○]	10 ～ 35	-	2	4 ～ 12	50 ～ 90	Non-Coated

  From: ₹ 8,217.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NTER-2X X-Coating Taper Radius End Mill

  NS TOOL

  Tapered radius end mill suitable for 56 HRC or less.
  Tool material, Ultrafine grain cemented carbide
  Helix angle, 30°
  Surface treatment, X coating
  No. of Flutes: 2
  Machining applications: Flat surface machining, side machining, grooving
  corner shape: radius

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 10	1 ～ 6	Tapered radius	Quenched and tempered steel[◎]	4 ～ 20	0.2 ～ 2	2	4 ～ 12	45 ～ 80	TiCN

  From: ₹ 10,448.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 2-flute / regular model

  MISUMI

  [Features]
  ·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 30	0.5 ～ 6	Tapered square	Quenched and tempered steel[◎]	2 ～ 24	-	2	4 ～ 12	50 ～ 70	For High Hardness (Silicon Group)

  From: ₹ 3,289.91
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper Ball End Type FXS-RB-TPB

  OSG

  A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for automobile curved surfaces.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	Quenched and tempered steel[◎]	4 ～ 25	0.3 ～ 1.25	multi-edged	3 ～ 6	35 ～ 60	TiAlN

  From: ₹ 14,136.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Ball End Mill

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel
  ◎; copper, aluminum alloy, resin

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 10	-	Taper ball	Quenched and tempered steel[◎]	10 ～ 35	0.5 ～ 3	2	4 ～ 16	50 ～ 100	Non-Coated

  From: ₹ 10,023.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill

  NS TOOL

  [Features]
  · The lower part of the neck is tapered to improve tool rigidity, and MUGEN COATING Premium is used, which is ideal for milling high hardness material. · These synergistic effects provide deep engraving processing on high-precision and high-efficiency materials with high hardness.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	Quenched and tempered steel[◎]	0.15 ～ 3	0.1 ～ 2	2	4 ～ 6	50 ～ 110	TiAlN

  From: ₹ 3,595.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute

  MISUMI

  [Features]
  ·Essential item for plastic runner fluting
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5 ～ 15	1.5 ～ 4	Tapered radius	Quenched and tempered steel[◎]	3 ～ 6.5	0 ～ 1	2	4 ～ 8	40 ～ 50	For High Hardness (Silicon Group)

  From: ₹ 4,099.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper End Type FXS-RB-TPE

  OSG

  A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for processing side surfaces.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	0.4 ～ 3	Tapered square	Quenched and tempered steel[◎]	2 ～ 40	-	multi-edged	3 ～ 8	35 ～ 80	TiAlN

  From: ₹ 10,359.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mill (Trapezoidal Runner) MG-TRC

  OSG

  Tapered blade end mill that can be used for trapezoidal runner processing. High toughness carbide alloy is used.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	Quenched and tempered steel[○]	4 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: ₹ 10,056.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MTE230 MUGEN-COATING Tapered End Mill

  NS TOOL

  Adopts Infinity coating to achieve a longer life, even for taper machining

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.2 ～ 10	Tapered square	Quenched and tempered steel[◎]	0.8 ～ 35	-	2	4 ～ 20	45 ～ 100	TiAlN

  From: ₹ 5,165.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MTB230 MUGEN-COATING Tapered Ball End Mill

  NS TOOL

  Capable of simultaneous taper machining and ball machining

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1 ～ 15	-	Taper ball	Quenched and tempered steel[◎]	1 ～ 16	0.1 ～ 2	2	4 ～ 10	50 ～ 70	TiAlN

  From: ₹ 8,084.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing

  NS TOOL

  NS's original high stiffness design enables high-precision and high-efficiency machining.
  [Work Material]
  ○: Heat-treated steel, hardening steel (Up to 55 HRC), stainless steel, titanium alloy, aluminum alloy, resin
  ◎: Carbon steel, steel alloy/tool steel, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.25 ～ 3	0.2 ～ 3	Tapered square	Quenched and tempered steel[◎]	2 ～ 40	-	4	3 ～ 6	40 ～ 80	TiAlN

  From: ₹ 5,102.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-2X

  NS TOOL

  [Work Material]
  ○: Stainless steel, aluminum alloy, copper, resin
  ◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	0.5 ～ 2.5	Tapered square	Quenched and tempered steel[◎]	2 ～ 4	-	2	3 ～ 4	35 ～ 45	TiCN

  From: ₹ 8,780.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-4

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 6	Tapered square	Quenched and tempered steel[◎]	20 ～ 35	-	4	6 ～ 12	60 ～ 90	Non-Coated

  From: ₹ 10,461.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Medium Blade End Mill NTEM-2

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 4	Tapered square	Quenched and tempered steel[◎]	5 ～ 20	-	2	4 ～ 16	50 ～ 90	Non-Coated

  From: ₹ 7,829.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper Medium Blade End Mill NTEM-2X

  NS TOOL

  Medium type taper end mill.
  Tool material, Ultrafine grain cemented carbide
  Helix angle, 30°
  Surface treatment, X coating
  No. of Flutes: 2
  Machining applications: Grooving, side milling

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	0.5 ～ 6	Tapered square	Quenched and tempered steel[◎]	4 ～ 30	-	2	3 ～ 16	35 ～ 90	Non-Coated

  From: ₹ 10,023.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper Ball End Mill

  EIKOSHA

  A tapered ball end mill that uses cemented carbide, making it ideal for profiling the curved surface of molds.
  [Features]
  ·Compared to high-speed steel, carbide is used, so heat resistance and wear resistance are greatly improved compared to powdered high-speed steel.
  ·Ideal for mold curved surface machining and profiling. Simultaneous processing of draft angle is possible.
  [Applications]
  ·Used for mold processing, etc.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	-	Taper ball	Quenched and tempered steel[○]	4 ～ 40	0.5 ～ 8	2	4 ～ 25	45 ～ 90	Non-Coated

  From: ₹ 7,268.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Long Taper Ball End Mill

  EIKOSHA

  Taper ball end mill long type using carbide.
  [Features]
  ·Compared to high-speed steel, carbide is used, so heat resistance and wear resistance are greatly improved compared to powdered high-speed steel.
  ·Ideal for mold curved surface machining and profiling. Simultaneous processing of draft angle is possible.
  [Applications]
  ·Ideal for curved surface processing of molds, etc.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	-	Taper ball	Quenched and tempered steel[○]	6 ～ 50	0.5 ～ 5	2	4 ～ 25	55 ～ 150	Non-Coated

  From: ₹ 8,633.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper end mill 2 flutes

  ATOM

  A small diameter taper end mill that standardizes maximum taper angles up to 15 degrees.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1° ～ 30′	0.1 ～ 3	Tapered square	Quenched and tempered steel[○]	0.5 ～ 12	-	2	3 ～ 10	35 ～ 50	-

  From: ₹ 5,737.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSRTN

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0°50' ～ 1°	2 ～ 16	Tapered radius	Quenched and tempered steel[◎]	3 ～ 24	0.5 ～ 3	3	6 ～ 20	70 ～ 220	-

  From: ₹ 12,873.27
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Tapered End Mill CSTE

  EIKOSHA

  Carbide tapered square end mill (carbide).
  [Features]
  · End mill with a tapered blade for machining of inclined parts.
  [Applications]
  · Optimal for milling taper parts.
  · Optimal for tapered-wall machining.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	0.5 ～ 16	Tapered square	Quenched and tempered steel[○]	2 ～ 65	-	2	3 ～ 32	35 ～ 140	Non-Coated

  From: ₹ 5,844.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPBTN220 CBN Super Spiral Long Taper Neck Ball End Mill

  NS TOOL

  [Features]
  · CBN long neck ball end mill with a taper neck shape for increased rigidity.
  · Both efficiency and accuracy are improved by a deep milled finish due to the spiral ball shape with improved sharpness.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.2 ～ 2	Taper ball	Quenched and tempered steel[◎]	0.15 ～ 1.2	0.1 ～ 1	2	4	50 ～ 53	Non-Coated

  From: ₹ 20,475.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NERB-2 2-Flute Taper Ball End Mill For Runner

  NS TOOL

  Tapered ball end mill suitable for carbon steel to heat-treated steel.
  Tool material, Ultrafine grain cemented carbide
  Helix angle, 30°
  No. of Flutes: 2
  Machining Applications: Side Machining, Grooving, Curved Surface Machining

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  10 ～ 20	-	Taper ball	Quenched and tempered steel[◎]	4 ～ 12	1 ～ 3	2	4 ～ 12	50 ～ 90	Non-Coated

  From: ₹ 11,401.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / for deep ribbing

  MISUMI

  [Features]
  ·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 4 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.4 ～ 2	Tapered square	Quenched and tempered steel[◎]	2 ～ 12	-	4	3 ～ 4	40 ～ 50	For High Hardness (Silicon Group)

  From: ₹ 4,066.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered ball end mill, 4-flute / long model

  MISUMI

  [Features]
  ·Blade length can be selected according to depth of rib groove (Choose shortest blade length possible to maintain rigid)
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	Quenched and tempered steel[◎]	4 ～ 30	0.3 ～ 1.25	4	4 ～ 6	45 ～ 70	For High Hardness (Silicon Group)

  From: ₹ 4,657.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute

  MISUMI

  [Features]
  ·Essential item for plastic runner fluting
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5 ～ 15	-	Taper ball	Quenched and tempered steel[◎]	3 ～ 7	1 ～ 3	2	4 ～ 10	40 ～ 75	For High Hardness (Silicon Group)

  From: ₹ 4,709.67
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model

  MISUMI

  [Features]
  ·R of tip is also effective in suppressing chipping
  ·Half-moon shape with good discharge of cutting chip even with small diameter
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  -	-	Taper ball	Quenched and tempered steel[◎]	-	0.1 ～ 0.3	1	4	45	For High Hardness (Silicon Group)

  From: ₹ 3,088.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type MG-TPDS

  OSG

  High toughness carbide alloy is used, providing a long service life at medium to low speeds

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	1 ～ 12	Tapered square	Quenched and tempered steel[○]	5 ～ 40	-	2	4 ～ 20	45 ～ 110	Non-Coated

  From: ₹ 8,788.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-flute, Tapered Blade, Short Type MG-TPMS

  OSG

  High toughness carbide alloy is used, providing a long service life at medium to low speeds

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	2 ～ 12	Tapered square	Quenched and tempered steel[○]	8 ～ 30	-	4	4 ～ 12	45 ～ 90	Non-Coated

  From: ₹ 9,633.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, taper type with corner rounding FXS-RB-TPCR

  OSG

  A radius end type high-rigidity taper end mill which enables rib grooves to be machined with high efficiency.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 1.5	1 ～ 1.5	Tapered radius	Quenched and tempered steel[◎]	8 ～ 12	0.2	multi-edged	4	45	TiAlN

  From: ₹ 12,657.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CTE 2000, UT Coat, 2-Flute Tapered

  UNION TOOL

  [Features]
  · 2-flute taper end mill with extensive variations from taper half angle of 30' to 15°

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	0.2 ～ 2.5	Tapered square	Quenched and tempered steel[◎]	0.8 ～ 8	-	2	3 ～ 8	38 ～ 50	TiCN

  From: ₹ 4,727.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CTE 4000, UT Coat, 4-Flute Tapered

  UNION TOOL

  [Features]
  · Taper end mill with extensive variations from taper half angle of 30' to 7°

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	TiCN

  From: ₹ 5,627.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-2

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, copper
  ◎: aluminum alloy, resin

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 3	Tapered square	Quenched and tempered steel[◎]	2 ～ 10	-	2	3 ～ 10	35 ～ 70	Non-Coated

  From: ₹ 7,171.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-2

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 3	Tapered square	Quenched and tempered steel[◎]	10 ～ 20	-	2	4 ～ 16	45 ～ 100	Non-Coated

  From: ₹ 9,291.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NER-2 Trapezoidal Runner End Mill

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	Quenched and tempered steel[◎]	5 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: ₹ 8,706.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-4

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	Non-Coated

  From: ₹ 7,463.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-4X

  NS TOOL

  [Work Material]
  ○: Stainless steel, aluminum alloy, copper, resin
  ◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	TiCN

  From: ₹ 8,926.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345

  NS TOOL

  The lower part of the neck is tapered to improve the rigidity as compared to the conventional long neck type. Enables high-efficiency machining through the adoption of a unique three-flute blade shape

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	Quenched and tempered steel[◎]	0.75 ～ 4.5	0.5 ～ 2	3	6	60 ～ 110	For High Hardness (Silicon Group)

  From: ₹ 4,847.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L

  NS TOOL

  The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	-	Taper ball	Quenched and tempered steel[◎]	0.2 ～ 10	0.1 ～ 5	2	4 ～ 12	50 ～ 140	TiAlN

  From: ₹ 8,194.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper End Mill (Medium)

  EIKOSHA

  Taper square end mill with strong hardness (carbide).
  [Features]
  ·Tapered edge shape for machining inclined parts with equal helix.
  [Applications]
  ·Ideal for taper milling.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	0.5 ～ 10	Tapered square	Quenched and tempered steel[○]	4 ～ 40	-	2	3 ～ 25	40 ～ 110	Non-Coated

  From: ₹ 5,961.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper ball end mill 2 blades

  ATOM

  A small diameter taper ball end mill that standardizes maximum taper angles up to 15 degrees.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1° ～ 30′	0.1 ～ 3	Taper ball	Quenched and tempered steel[○]	0.5 ～ 12	0.05 ～ 1.5	2	3 ～ 10	35 ～ 55	-

  From: ₹ 8,282.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball Long Type DZ-OCLB-T

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0°57' ～ 2°52'	4 ～ 12	Taper ball	Quenched and tempered steel[◎]	10 ～ 33	2 ～ 6	2	10 ～ 16	160 ～ 280	TiAlN

  From: ₹ 20,711.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Single corner (θ)(Degree)
Tip diameter (D)(φ)
Type
work material
Blade length (l)(mm)
R Size(mm)
Number of flutes(sheet)
Shank diameter (d)(mm)
Overall Length (L)(mm)
Coating

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	OSG	EIKOSHA	EIKOSHA	NS TOOL	MISUMI	OSG	NS TOOL	NS TOOL	MISUMI	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	EIKOSHA	ATOM	DIJET	EIKOSHA	NS TOOL	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	ATOM	DIJET
Product Series	TSC series carbide tapered end mill, 4-flute / regular	2-flute, Tapered Blade, Short Type FX-MG-TPDS	Carbide Reverse Cutter (Carbide Solid Reverse Taper End Mill)	Carbide Solid Tapered End Mill (Long) CSTEL	NTER-2X X-Coating Taper Radius End Mill	TSC series carbide tapered end mill, 2-flute / regular model	For Rib Grooves, Taper Ball End Type FXS-RB-TPB	Taper Ball End Mill	MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill	TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute	For Rib Grooves, Taper End Type FXS-RB-TPE	Carbide End Mill (Trapezoidal Runner) MG-TRC	MTE230 MUGEN-COATING Tapered End Mill	MTB230 MUGEN-COATING Tapered Ball End Mill	MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing	X Coated Taper End Mill NTE-2X	Tapered Long Blade End Mill NTEL-4	Tapered Medium Blade End Mill NTEM-2	X Coated Taper Medium Blade End Mill NTEM-2X	Carbide Solid Taper Ball End Mill	Carbide Solid Long Taper Ball End Mill	Taper end mill 2 flutes	One Cut Super Radius End Mill DV-OCSRTN	Carbide Solid Tapered End Mill CSTE	SSPBTN220 CBN Super Spiral Long Taper Neck Ball End Mill	NERB-2 2-Flute Taper Ball End Mill For Runner	TSC series carbide tapered end mill, 4-flute / for deep ribbing	TSC series carbide tapered ball end mill, 4-flute / long model	TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute	TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model	2-flute, Tapered Blade, Short Type MG-TPDS	4-flute, Tapered Blade, Short Type MG-TPMS	For Rib Grooves, taper type with corner rounding FXS-RB-TPCR	C-CTE 2000, UT Coat, 2-Flute Tapered	C-CTE 4000, UT Coat, 4-Flute Tapered	Carbide Tapered End Mill NTE-2	Tapered Long Blade End Mill NTEL-2	NER-2 Trapezoidal Runner End Mill	Carbide Tapered End Mill NTE-4	X Coated Taper End Mill NTE-4X	MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345	MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L	Carbide Solid Taper End Mill (Medium)	Taper ball end mill 2 blades	One Cut Ball Long Type DZ-OCLB-T
From	₹ 4,050.65	₹ 9,573.00	₹ 7,799.84	₹ 8,217.55	₹ 10,448.78	₹ 3,289.91	₹ 14,136.31	₹ 10,023.02	₹ 3,595.11	₹ 4,099.58	₹ 10,359.22	₹ 10,056.53	₹ 5,165.04	₹ 8,084.91	₹ 5,102.09	₹ 8,780.05	₹ 10,461.00	₹ 7,829.09	₹ 10,023.02	₹ 7,268.29	₹ 8,633.49	₹ 5,737.93	₹ 12,873.27	₹ 5,844.13	₹ 20,475.49	₹ 11,401.09	₹ 4,066.55	₹ 4,657.15	₹ 4,709.67	₹ 3,088.38	₹ 8,788.11	₹ 9,633.27	₹ 12,657.62	₹ 4,727.07	₹ 5,627.13	₹ 7,171.45	₹ 9,291.71	₹ 8,706.40	₹ 7,463.44	₹ 8,926.05	₹ 4,847.60	₹ 8,194.75	₹ 5,961.62	₹ 8,282.78	₹ 20,711.40
Days to Ship	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications	TS General Steel 4 Flutes R (Regular)					TS General Steel 2 Flutes R (Regular)				TS General Steel 2 Flutes																	TS General Steel 4 Flutes	TS General Steel 4 Flutes L (Long)	TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)
Single corner (θ)(Degree)	0.5 ～ 5	0.5 ～ 20	0.5 ～ 5	1ﾟ ～ 30'	0.5 ～ 10	0.5 ～ 30	0.5 ～ 2	0.5 ～ 10	0.5 ～ 2	5 ～ 15	0.5 ～ 3	7 ～ 15	0.5 ～ 20	1 ～ 15	0.25 ～ 3	0.5 ～ 5	0.5 ～ 5	0.5 ～ 20	0.5 ～ 15	1ﾟ ～ 30'	1ﾟ ～ 30'	1° ～ 30′	0°50' ～ 1°	1ﾟ ～ 30'	0.5 ～ 2	10 ～ 20	0.5 ～ 2	0.5 ～ 2	5 ～ 15	-	0.5 ～ 7	0.5 ～ 3	0.5 ～ 1.5	0.5 ～ 15	0.5 ～ 7	0.5 ～ 20	0.5 ～ 20	7 ～ 15	0.5 ～ 15	0.5 ～ 5	0.5 ～ 2	0.5 ～ 5	1ﾟ ～ 30'	1° ～ 30′	0°57' ～ 2°52'
Tip diameter (D)(φ)	3 ～ 10	0.5 ～ 12	2 ～ 12	1 ～ 6	1 ～ 6	0.5 ～ 6	-	-	-	1.5 ～ 4	0.4 ～ 3	2 ～ 6	0.2 ～ 10	-	0.2 ～ 3	0.5 ～ 2.5	3 ～ 6	1 ～ 4	0.5 ～ 6	-	-	0.1 ～ 3	2 ～ 16	0.5 ～ 16	0.2 ～ 2	-	0.4 ～ 2	-	-	-	1 ～ 12	2 ～ 12	1 ～ 1.5	0.2 ～ 2.5	3 ～ 10	0.5 ～ 3	1 ～ 3	2 ～ 6	3 ～ 10	3 ～ 10	-	-	0.5 ～ 10	0.1 ～ 3	4 ～ 12
Type	Tapered square	Tapered square	Tapered radius	Tapered square	Tapered radius	Tapered square	Taper ball	Taper ball	Taper ball	Tapered radius	Tapered square	Tapered square	Tapered square	Taper ball	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Taper ball	Taper ball	Tapered square	Tapered radius	Tapered square	Taper ball	Taper ball	Tapered square	Taper ball	Taper ball	Taper ball	Tapered square	Tapered square	Tapered radius	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Taper ball	Taper ball	Tapered square	Taper ball	Taper ball
work material	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]
Blade length (l)(mm)	12 ～ 35	2 ～ 40	3 ～ 25	10 ～ 35	4 ～ 20	2 ～ 24	4 ～ 25	10 ～ 35	0.15 ～ 3	3 ～ 6.5	2 ～ 40	4 ～ 12	0.8 ～ 35	1 ～ 16	2 ～ 40	2 ～ 4	20 ～ 35	5 ～ 20	4 ～ 30	4 ～ 40	6 ～ 50	0.5 ～ 12	3 ～ 24	2 ～ 65	0.15 ～ 1.2	4 ～ 12	2 ～ 12	4 ～ 30	3 ～ 7	-	5 ～ 40	8 ～ 30	8 ～ 12	0.8 ～ 8	10 ～ 35	2 ～ 10	10 ～ 20	5 ～ 12	10 ～ 35	10 ～ 35	0.75 ～ 4.5	0.2 ～ 10	4 ～ 40	0.5 ～ 12	10 ～ 33
R Size(mm)	-	-	0.3 ～ 0.5	-	0.2 ～ 2	-	0.3 ～ 1.25	0.5 ～ 3	0.1 ～ 2	0 ～ 1	-	-	-	0.1 ～ 2	-	-	-	-	-	0.5 ～ 8	0.5 ～ 5	-	0.5 ～ 3	-	0.1 ～ 1	1 ～ 3	-	0.3 ～ 1.25	1 ～ 3	0.1 ～ 0.3	-	-	0.2	-	-	-	-	-	-	-	0.5 ～ 2	0.1 ～ 5	-	0.05 ～ 1.5	2 ～ 6
Number of flutes(sheet)	4	2	2	2	2	2	multi-edged	2	2	2	multi-edged	2	2	2	4	2	4	2	2	2	2	2	3	2	2	2	4	4	2	1	2	4	multi-edged	2	4	2	2	2	4	4	3	2	2	2	2
Shank diameter (d)(mm)	4 ～ 16	3 ～ 20	3 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	3 ～ 6	4 ～ 16	4 ～ 6	4 ～ 8	3 ～ 8	4 ～ 12	4 ～ 20	4 ～ 10	3 ～ 6	3 ～ 4	6 ～ 12	4 ～ 16	3 ～ 16	4 ～ 25	4 ～ 25	3 ～ 10	6 ～ 20	3 ～ 32	4	4 ～ 12	3 ～ 4	4 ～ 6	4 ～ 10	4	4 ～ 20	4 ～ 12	4	3 ～ 8	6 ～ 16	3 ～ 10	4 ～ 16	4 ～ 12	6 ～ 16	6 ～ 16	6	4 ～ 12	3 ～ 25	3 ～ 10	10 ～ 16
Overall Length (L)(mm)	60 ～ 90	40 ～ 120	40 ～ 70	50 ～ 90	45 ～ 80	50 ～ 70	35 ～ 60	50 ～ 100	50 ～ 110	40 ～ 50	35 ～ 80	45 ～ 75	45 ～ 100	50 ～ 70	40 ～ 80	35 ～ 45	60 ～ 90	50 ～ 90	35 ～ 90	45 ～ 90	55 ～ 150	35 ～ 50	70 ～ 220	35 ～ 140	50 ～ 53	50 ～ 90	40 ～ 50	45 ～ 70	40 ～ 75	45	45 ～ 110	45 ～ 90	45	38 ～ 50	50 ～ 90	35 ～ 70	45 ～ 100	45 ～ 75	50 ～ 90	50 ～ 90	60 ～ 110	50 ～ 140	40 ～ 110	35 ～ 55	160 ～ 280
Coating	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	TiCN	For High Hardness (Silicon Group)	TiAlN	Non-Coated	TiAlN	For High Hardness (Silicon Group)	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	-	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	For High Hardness (Silicon Group)	TiAlN	Non-Coated	-	TiAlN

Loading...