• You can add up to 6 items per a category to the compare list. Compare

  

  HLRS2000 HM Coated 2-Flute Long Neck Radius

  UNION TOOL

  [Features]
  · Long neck radius shape that exhibits power in high-performance and high-quality machining
  · Capable of cutting everything from raw materials to high-hardness materials
  · Capable of stable, long-life machining for both dry and wet type

  From: ₹ 3,048.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSR200 CBN Super Speed Radius End Mill

  NS TOOL

  Achieves high-efficiency machining of corner radius due to outstanding CBN durability

  From: ₹ 12,716.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X

  7 LEADERS

  [Features]
  · Also use the 4-flute short radius end mill to prevent tip chipping.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.
  · It supports high-speed side cutting.

  From: ₹ 2,426.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Corner Radius Medium End Mill 30° B257X

  7 LEADERS

  [Features]
  · Also use the 2-flute medium shank radius end mill to prevent tip chipping.
  · Enables radius cutting deep into the work materials.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)

  OSG

  Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

  From: ₹ 8,044.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills WX Super Coated High-precision

  OSG

  High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.

  From: ₹ 4,345.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLRS4000 HM Coated 4-Flute Long Neck Radius

  UNION TOOL

  [Features]
  · Long neck radius shape that exhibits power in high-performance and high-quality machining
  · Rigidity-oriented blade shape provides long life even when machining high hardness materials
  · Capable of stable machining for both dry and wet type
  · New HARDMAX coating adopted to improve oxidation resistance.

  From: ₹ 3,577.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Multi-function end mill radius type.
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45°, regular model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck radius end mill, 4-flute / long neck model

  MISUMI

  [Features]
  ·Radius (R) accuracy of ±5 µm (compared to the manufacturer measurements) enables high precision deep cavity milling
  ·By adopting 4-flute shape, it is possible to process at high feed setting compared to 2-flute
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HRRS, HM Coated 4-Flute Short Shank Radius

  UNION TOOL

  [Features]
  · Unique corner rounding creates larger cutting depth and pick feed than with a ball
  · The seamless corner radius shape reduces cutting resistance and chattering
  · High hardness materials up to 65 HRC can also be machined

  From: ₹ 4,495.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MHDH445R 4-Flute Radius-End Mill for High-Hardness

  NS TOOL

  Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC)

  From: ₹ 8,084.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRS20HSP High Efficiency 4-Flute Long Neck Radius 20° Twist

  UNION TOOL

  [Features]
  · High-rigidity 4-flute radius 8 (for high-hardness materials). 20° torsion.

  From: ₹ 4,670.80
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Radius

  OSG

  The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.

  From: ₹ 15,389.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 6,160.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) XAL series carbide radius end mill, 2-flute / short model

  MISUMI

  Radius end mills are available at low prices

  • Volume Discount

  From: ₹ 1,336.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 4,792.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  MISUMI

  Long neck type with interference prevention can be selected from a number of effective lengths

  From: ₹ 5,120.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute stub model

  MISUMI

  [Features]
  ·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 2,306.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

  MISUMI

  The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

  From: ₹ 5,324.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
  ·Long neck type is ideal for deep cavity milling of deep pockets, etc.
  ·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 4,818.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

  MISUMI

  [Features]
  ·Suppresses chattering with unequal lead and unequal flutes
  ·Stable machining is possible while maintaining finished surface accuracy
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Can process heat-treated steel up to 50HRC
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 2,749.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

  MISUMI

  [Features]
  ·Effective for deep cutting due to long neck type
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 2,312.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

  OSG

  End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  From: ₹ 6,970.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  From: ₹ 6,324.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose

  OSG

  Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

  From: ₹ 18,126.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Super Radius End Mills

  OSG

  A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.

  From: ₹ 5,881.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius

  OSG

  Pencil neck radius end mill that achieves high-efficiency machining of deep parts that are prone to chattering and difficult-to-cut materials.

  From: ₹ 11,069.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HRRS, HM Coat, 4-Flute Radius

  UNION TOOL

  [Features]
  · Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool
  · The optimized corner radius size enables processing with larger feed than conventional
  · Seamless Corner Radius Shape
  · High hardness materials up to 65 HRC can also be machined

  From: ₹ 4,881.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MHDH645R 6-Flute Radius-End Mill for High-Hardness

  NS TOOL

  Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC)

  From: ₹ 9,353.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coat, Carbide long neck radius end mill, 2 flutes

  VAN HOORN

  [Features]
  · Micro end mill ideal for machining deep ribs in materials up to HRC 55, available from 0.1 mm blade diameter up.
  · A long product life is achieved with new generation TiAlN coating and a newly designed blade tip shape.
  · European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)

  From: ₹ 3,478.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X

  7 LEADERS

  [Features]
  · Also use the 2-flute short radius end mill to prevent tip chipping.
  · Nanoparticle Multilayer Coating
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

  MISUMI

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  From: ₹ 8,543.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 4,968.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling

  From: ₹ 5,153.05
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

  MISUMI

  A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

  From: ₹ 3,161.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  MISUMI

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  • Volume Discount

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  MISUMI

  4-Flute Radius for High-Efficiency and High-Speed Machining

  From: ₹ 2,176.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 4-flute / short model

  MISUMI

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  From: ₹ 1,736.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
  ·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish

  From: ₹ 4,976.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 4,560.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  MISUMI

  [Features]
  ·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
  ·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
  ·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

  From: ₹ 3,449.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 3,064.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 4,093.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	UNION TOOL	NS TOOL	7 LEADERS	7 LEADERS	OSG	OSG	UNION TOOL	MISUMI	MISUMI	MISUMI	UNION TOOL	NS TOOL	UNION TOOL	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	UNION TOOL	NS TOOL	VAN HOORN	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	HLRS2000 HM Coated 2-Flute Long Neck Radius	SSR200 CBN Super Speed Radius End Mill	Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X	Carbide 2-Flute Corner Radius Medium End Mill 30° B257X	Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)	Micro Grain Carbide End Mills WX Super Coated High-precision	HLRS4000 HM Coated 4-Flute Long Neck Radius	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45°, regular model	TSC series carbide long neck radius end mill, 4-flute / long neck model	HRRS, HM Coated 4-Flute Short Shank Radius	MHDH445R 4-Flute Radius-End Mill for High-Hardness	CRS20HSP High Efficiency 4-Flute Long Neck Radius 20° Twist	CBN End Mills 2 Flutes Radius	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	(Economy series) XAL series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / short model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model	TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model	VAC Series Carbide 4-Flute Uneven Lead Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose	WX Super Radius End Mills	Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius	HRRS, HM Coat, 4-Flute Radius	MHDH645R 6-Flute Radius-End Mill for High-Hardness	TiAlN Coat, Carbide long neck radius end mill, 2 flutes	Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	(Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	(Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	(Economy series) XAL series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
From	₹ 3,048.80	₹ 12,716.55	₹ 2,426.95	₹ 2,426.95	₹ 8,044.75	₹ 4,345.35	₹ 3,577.87				₹ 4,495.36	₹ 8,084.91	₹ 4,670.80	₹ 15,389.98	₹ 6,160.53	₹ 1,336.00	₹ 4,792.00	₹ 5,120.00	₹ 2,306.27		₹ 5,324.73	₹ 4,818.16	₹ 2,749.36	₹ 2,312.00	₹ 6,970.56	₹ 6,324.96	₹ 18,126.36	₹ 5,881.64	₹ 11,069.11	₹ 4,881.11	₹ 9,353.33	₹ 3,478.58	₹ 2,426.95	₹ 8,543.31	₹ 4,968.22	₹ 5,153.05	₹ 3,161.31		₹ 2,176.00	₹ 1,736.00	₹ 4,976.00	₹ 4,560.00	₹ 3,449.82	₹ 3,064.13	₹ 4,093.11
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications
Blade diameter (D)(φ)	0.4 ～ 6	0.2 ～ 2	1 ～ 20	3 ～ 20	3 ～ 25	0.2 ～ 4	0.8 ～ 6	3 ～ 20	3 ～ 20	4 ～ 5	2 ～ 12	3 ～ 4	2　 ～ 12	0.5 ～ 3	4 ～ 20	1 ～ 12	2 ～ 20	4 ～ 16	2 ～ 12	1 ～ 20	2 ～ 6	4 ～ 12	1.5 ～ 12	1 ～ 12	0.5 ～ 2.5	1 ～ 12	1 ～ 5	2 ～ 13	2 ～ 12	2 ～ 12	5 ～ 12	0.1 ～ 2.5	1 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	2 ～ 6	0 ～ 16	4 ～ 12	3 ～ 20	2 ～ 12	2 ～ 12	3 ～ 12	2 ～ 12	3 ～ 12
R Size(mm)	0.05 ～ 1	0.02 ～ 0.5	0.1 ～ 4	0.1 ～ 4	0.2 ～ 5	0.05 ～ 1	0.05 ～ 1	0.2 ～ 3	0.2 ～ 3	0.5	0.3 ～ 4	0.2 ～ 0.5	0.2 ～ 1.2	0.05 ～ 0.5	0.813 ～ 2.607	0.1 ～ 3	0.5 ～ 3	1 ～ 3	0.2 ～ 3	0.1 ～ 3	0.2 ～ 0.5	1 ～ 2	0.2 ～ 3	0.2 ～ 1	0.1	0.1 ～ 3	0.3 ～ 1	0.5 ～ 3	0.5 ～ 2	0.3 ～ 4	0.2 ～ 2	0.03 ～ 0.2	0.1 ～ 4	0.813 ～ 2.438	0.813 ～ 2.438	0.813 ～ 2.438	0.2 ～ 0.5	0.2 ～ 2	0.2 ～ 2	0.1 ～ 3	0.5 ～ 2	0.5 ～ 2	0.75 ～ 3	0.5 ～ 2	0.3 ～ 1
Blade length (ℓ)(mm)	0.4 ～ 6	0.08 ～ 1.2	3 ～ 38	10 ～ 55	6 ～ 50	0.15 ～ 4	0.48 ～ 4.8	5 ～ 38	5 ～ 56	8 ～ 12	2 ～ 12	6 ～ 8	2.5 ～ 15	0.3 ～ 1.8	8 ～ 40	3 ～ 30	4 ～ 40	6 ～ 24	3 ～ 18	2 ～ 40	3 ～ 9	8 ～ 24	4 ～ 30	1.5 ～ 30	0.7 ～ 3.7	2.5 ～ 26	2 ～ 10	0.8 ～ 5.5	3 ～ 18	2 ～ 12	10 ～ 24	0.2 ～ 3	3 ～ 38	8 ～ 24	8 ～ 24	8 ～ 24	3 ～ 9	16 ～ 48	18 ～ 38	8 ～ 38	2 ～ 12	4 ～ 24	1.2 ～ 5	2 ～ 12	4.5 ～ 18
Number of flutes(sheet)	2	2	4	2	4	2 ～ 4	4	4	4	4	4	4	4	2	4	2	4	4	2	2	4	3	4	4	2	2	3	3 ～ 4	3	4	6	2	2	3	3	4	4	3	4	4	3	3	4	4	3
Overall Length (L)(mm)	50 ～ 120	48 ～ 53	50 ～ 100	50 ～ 160	50 ～ 120	50 ～ 80	50 ～ 120	60 ～ 110	60 ～ 130	45	45 ～ 75	60	50 ～ 75	45 ～ 50	50 ～ 150	50 ～ 75	50 ～ 130	70 ～ 180	35 ～ 60	40 ～ 110	50	70 ～ 140	50 ～ 150	50 ～ 110	50	40 ～ 110	60 ～ 70	60 ～ 110	60 ～ 220	70 ～ 120	60 ～ 80	64	50 ～ 100	50 ～ 100	80 ～ 160	80 ～ 160	50	60 ～ 110	60 ～ 100	50 ～ 100	50 ～ 100	50 ～ 100	60 ～ 110	50 ～ 100	40 ～ 65
work material	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]
Shank diameter (d)(mm)	4 ～ 6	4	4 ～ 20	3 ～ 20	6 ～ 25	4 ～ 6	4 ～ 6	6 ～ 20	6 ～ 20	6	3 ～ 12	6	6 ～ 12	4 ～ 6	6 ～ 20	4 ～ 12	4 ～ 20	4 ～ 16	4 ～ 12	4 ～ 20	6	4 ～ 12	6 ～ 12	4 ～ 12	6	4 ～ 12	6	6 ～ 12	6 ～ 20	3 ～ 12	6 ～ 12	4 ～ 6	4 ～ 20	6 ～ 12	6 ～ 12	6 ～ 12	6	6 ～ 16	6 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	6 ～ 12	4 ～ 12	6 ～ 12
Underneck length (ℓ1)(mm)	1 ～ 60	0.5 ～ 10	-	-	-	0.5 ～ 35	2 ～ 48	18 ～ 73	26 ～ 92	-	6 ～ 36	-	5 ～ 30	1.5 ～ 6	-	-	-	28 ～ 120	-	17 ～ 45	-	28 ～ 90	-	4 ～ 50	1.5 ～ 5	-	4 ～ 15	5 ～ 24	10 ～ 160.8	6 ～ 36	-	0.2 ～ 25	-	-	35 ～ 108	35 ～ 108	-	-	-	-	-	-	7.5 ～ 24	-	-
Machining Application	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	-	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts
Coating	For High Hardness (Silicon Group)	Non-Coated	-	-	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	TiAlN	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Type	Long-Neck Radius	radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius	Long-Neck Radius	Long-Neck Radius	radius	Long-Neck Radius	radius	High-Feed Radius	radius	High-Feed Radius	Long-Neck Radius	radius	radius	High-Feed Radius	Long-Neck Radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	Long-Neck Radius	radius	Long-Neck Radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	-	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
R Precision(μm)	-	0.005～-0.005	0～-20	0～-20	-	-	-	±0.01	±0.01	±0.01	-	0.01～-0.01	-	-	-	±0.02	±0.015	±0.015	±0.01	±0.01 ～ ±0.02	±0.005	±0.015	-	-	-	-	-	-	-	-	0.01～-0.01	-	0～-20	-	-	-	±0.005	±0.02	±0.02	±0.02	±0.015	±0.015	±0.02	±0.015	±0.01

Loading...