Carbide Ball End Mills（work material：Quenched and tempered steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]
  · High-accuracy ball end mill coated with WXL hard lubricating film coating.
  Proven performance on a wide range of work materials.
  Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	Quenched and tempered steel[◎]	-0.007 to 0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,011.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HM Coated 2-flute, Long Neck Ball HSLB

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 60	3 ～ 6	2	45 ～ 120	Quenched and tempered steel[◎]	-0.005～0.005 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 1,854.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

  NS TOOL

  World's smallest ball end mill "Micro Ball" extends the microfabrication area

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.005 ～ 0.05	0.01 ～ 0.1	-	4	1	45	Quenched and tempered steel[◎]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,912.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

  NS TOOL

  Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.3 ～ 50	4 ～ 6	2	45 ～ 120	Quenched and tempered steel[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: ₹ 2,168.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]
  ·General purpose 2-blade ball end mill for wide range of profiling
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	Quenched and tempered steel[◎]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 1,260.11
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Long shank type, ideal for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	Quenched and tempered steel[◎]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,008.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
  · Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	1 ～ 25	2.2 ～ 50	4 ～ 25	2	40 ～ 180	Quenched and tempered steel[◎]	±5 ～ ±10	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,320.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSB, HM Coated 2-Flute Ball

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.03 ～ 6	0.06 ～ 22	-	4 ～ 12	2	50 ～ 110	Quenched and tempered steel[◎]	-0.007～0.007 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,829.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2 Ball End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 55	-	4 ～ 25	2	60 ～ 180	Quenched and tempered steel[○]	-10～+10	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 4,117.65
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	Quenched and tempered steel[◎]	±0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 10,797.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRBH230 Long-Neck Ball, Hard (for High Hardness)

  NS TOOL

  The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 50	4 ～ 6	2	45 ～ 120	Quenched and tempered steel[◎]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 2,182.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Ball End Mill CSBE

  EIKOSHA

  [Features]
  · 2-flute carbide solid ball end mill.
  · For shape machining.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 20	3 ～ 70	-	4 ～ 32	2	45 ～ 180	Quenched and tempered steel[○]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 7,570.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model

  MISUMI

  A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 60	3 ～ 6	2	50 ～ 110	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: ₹ 1,028.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball-End Type, GX-EQD-SF

  OSG

  Ball end mill with spherical cutting edge developed for shrink fitting.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  10	15	-	12	2	58	Quenched and tempered steel[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Spherical Ball

  From: ₹ 25,989.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT COAT 2-Flute Long-Neck Ball CSLEB

  UNION TOOL

  [Features]
  · With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
  · New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
  · Supports a wide range from copper and raw materials to 55 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 60	3 ～ 6	2	45 ～ 120	Quenched and tempered steel[◎]	-0.005～0.005 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	TiCN	Long-Neck Ball

  From: ₹ 1,854.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT Coat, 2-flute Ball CSEB

  UNION TOOL

  [Features]
  · With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
  · New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
  · Supports a wide range from copper and raw materials to 55 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.3 ～ 18	-	4 ～ 12	2	50 ～ 110	Quenched and tempered steel[◎]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: ₹ 1,879.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Blade Sander Ball

  WIDIN

  [Features]
  · Compatible with soft materials and aluminum alloys with a blade shape that emphasizes sharpness.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  R0.75 ～ R10	4 ～ 38	-	3 ～ 20	2	50 ～ 160	Quenched and tempered steel[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 2,552.85
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

  MISUMI

  [Features]
  ·High stiffness 2-flute type with length taper shape
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.15 ～ 5	0.3 ～ 8	2 ～ 60	4 ～ 12	2	50 ～ 110	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  From: ₹ 2,143.38
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter Ball End Mill, 2-Flute

  ATOM

  Good surface roughness of the cutting edge realizes high quality finished surface.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 0.475	0.2 ～ 2.5	-	3	2	40	Quenched and tempered steel[○]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,333.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Ball End Mill, 2-Flute

  ATOM

  Supports a wide range of applications, from general steel to nonferrous metals and resins. High sharpness without coating achieves high-precision and high-quality finished surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	3 ～ 40	-	4 ～ 20	2	40 ～ 105	Quenched and tempered steel[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,054.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 0.5	0.3 ～ 1	1 ～ 10	6	2	54 ～ 57	Quenched and tempered steel[○]	-	Curved surface	Other	Long-Neck Ball

  From: ₹ 11,008.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, regular model

  MISUMI

  [Features]
  ·Regular bridge length allows for many regrinding times
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	17 ～ 80	4 ～ 16	2	50 ～ 140	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

  MISUMI

  [Features]
  ·High-feed, high stiffness 3-flute taper shape with taper length
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 6	7 ～ 60	4 ～ 8	3	50 ～ 110	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 2-flute / long neck model

  MISUMI

  [Features]
  ·Long neck shape suitable for deep cavity milling
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 8	0.2 ～ 60	3 ～ 8	2	40 ～ 110	Quenched and tempered steel[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

  MISUMI

  [Features]
  ·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
  ·Taper neck is effective in suppressing chattering
  ·Machining of high hardness steel up to 65HRC is possible
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	20 ～ 50	4 ～ 8	3	70 ～ 110	Quenched and tempered steel[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  From: ₹ 3,991.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Mold Finish Master BNBP

  NACHI(FUJIKOSHI)

  ·CBN ball end mill.
  ·Suitable for high-speed finishing of high-hardness material dies.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1	0.3 ～ 1.4	1.2 ～ 5.5	4 ～ 6	2	50	Quenched and tempered steel[○]	-	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 28,086.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-SXB

  OSG

  Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.3 ～ 1.8	1.2 ～ 6	4 ～ 6	2	45 ～ 50	Quenched and tempered steel[◎]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 19,114.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-HS-EBD

  OSG

  WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.4 ～ 18	-	4 ～ 12	2	35 ～ 70	Quenched and tempered steel[◎]	-0.007～+0.003 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 1,496.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS

  OSG

  Ball end mill for heavy cutting that enables high speed and high efficiency (large cutting depth). Short overall length which fits shrink-fit and HSK types perfectly.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 12	2.5 ～ 30	6 ～ 12	2	50 ～ 80	Quenched and tempered steel[◎]	-0.015～+0.015 ～ -0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 9,244.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-PC-EBD

  OSG

  [Features]
  · WXL coating with excellent lubrication and wear resistance.
  Can be used with a wide range of work materials and cutting applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.16 ～ 12	1 ～ 80	4 ～ 16	2	45 ～ 160	Quenched and tempered steel[◎]	-0.005 to +0.005 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,112.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD

  OSG

  Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 40	4 ～ 6	2	45 ～ 90	Quenched and tempered steel[○]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 2,079.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WXL-LN-EBD

  OSG

  The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 6	0.3 ～ 50	3 ～ 6	2	45 ～ 120	Quenched and tempered steel[◎]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: ₹ 3,751.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSBL200 CBN Super Speed Long Neck Ball End Mill

  NS TOOL

  Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 1	0.08 ～ 1.2	0.3 ～ 10	4	2	50 ～ 53	Quenched and tempered steel[◎]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 16,016.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH230 2-Flute Ball-End Mill for High-Hardness

  NS TOOL

  Standard type ball end mill for high hardness. Ideal for finishing

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 100	Quenched and tempered steel[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 2,168.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

  NS TOOL

  The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.01 ～ 0.05	0.02 ～ 0.1	-	4	1	50	Quenched and tempered steel[◎]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 22,997.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CFLB, UT Coat 3-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]
  · Provides amazing high feed compared to the conventional 2-flute long neck ball.
  · With new UTCOAT, outstanding lubricity and long life are achieved.
  · Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.
  · Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)
  · O.D. Tolerance: 0/-0.02

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.48 ～ 4.8	2 ～ 40	4 ～ 6	3	50 ～ 90	Quenched and tempered steel[◎]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Long-Neck Ball

  From: ₹ 3,196.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Ball End Mill NSBL-2

  NS TOOL

  The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	15 ～ 30	-	6 ～ 12	2	120 ～ 180	Quenched and tempered steel[◎]	0.02～-0.02	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 9,706.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LA Long Ball End Mill, 2-Flute, OK Coated

  OKAZAKI SEIKO

  [Features]
  A carbide long ball end mill with 2 flutes.
  The deep rib type prevents tool interference during deep cutting.
  The long shank allows for a wide range of die milling.
  [Applications]
  Suitable for curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	Quenched and tempered steel[◎]	-	Curved surface / Engraving / R Groove	TiAlN	Ball

  From: ₹ 6,434.80
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	Quenched and tempered steel[◎]	-	Curved surface / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 6,434.80
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated

  OKAZAKI SEIKO

  Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 55	-	4 ～ 25	2	60 ～ 180	Quenched and tempered steel[◎]	-10～+10	Curved surface / Engraving / R Groove	TiAlN	Ball

  From: ₹ 1,558.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill SBEL

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	5 ～ 80	-	4 ～ 32	2	45 ～ 150	Quenched and tempered steel[○]	0～-50	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 8,379.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63)

  SANDVIK

  High-quality carbide end mill CoroMill® for a highly productive, efficient and reliable milling solutionPlura profiling carbide ball end mill

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 8	2 ～ 15	20 ～ 61	6 ～ 16	2 ～ 4	75 ～ 150	Quenched and tempered steel[○]	-	Curved surface	Other	Ball

  From: ₹ 12,070.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Mini Ball End Mill with 2 Flutes 2MNER

  NACHI(FUJIKOSHI)

  [Features]
  · Carbide solid type small diameter ball end mill.
  · Ideal for rounding and micro processing of precision molds and parts.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.75	5	-	4	2	40	Quenched and tempered steel[○]	-	-	Non-Coated	Ball

  From: ₹ 4,590.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S

  UNION TOOL

  [Features]
  · Can be used for machining at short overhang lengths.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 20	4 ～ 6	2	35 ～ 50	Quenched and tempered steel[○]	±3 ～ ±5	-	-	Long-Neck Ball

  From: ₹ 1,830.54
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]
  ·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality
  ·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	Quenched and tempered steel[◎]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,231.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	UNION TOOL	NS TOOL	NS TOOL	MISUMI	MISUMI	MISUMI	UNION TOOL	OKAZAKI SEIKO	MISUMI	NS TOOL	EIKOSHA	MISUMI	OSG	UNION TOOL	UNION TOOL	WIDIN	MISUMI	ATOM	ATOM	SANDVIK	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	SANDVIK	NACHI(FUJIKOSHI)	UNION TOOL	MISUMI
Product Series	Ball End Type, 2-Flute WXL-EBD	HM Coated 2-flute, Long Neck Ball HSLB	NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	XAC series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short, long shank model	XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type	HSB, HM Coated 2-Flute Ball	SBD2 Ball End Mill, 2-Flute, Non-Coated	CBN Ball End Mill, 2-Flute	MRBH230 Long-Neck Ball, Hard (for High Hardness)	Carbide Solid Ball End Mill CSBE	XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model	Ball-End Type, GX-EQD-SF	UT COAT 2-Flute Long-Neck Ball CSLEB	UT Coat, 2-flute Ball CSEB	2-Blade Sander Ball	TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model	Small Diameter Ball End Mill, 2-Flute	Standard Ball End Mill, 2-Flute	CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)	TSC series carbide ball end mill, regular model	TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model	TSC series carbide long neck ball end mill, 2-flute / long neck model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	CBN Mold Finish Master BNBP	Ball End Type, 2-Flute CBN-SXB	Ball End Type, 2-Flute WXL-HS-EBD	Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS	Ball End Type, 2-Flute WXL-PC-EBD	Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD	Long Neck Ball Type, 2-Flute WXL-LN-EBD	SSBL200 CBN Super Speed Long Neck Ball End Mill	MSBH230 2-Flute Ball-End Mill for High-Hardness	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	CFLB, UT Coat 3-Flute Long Neck Ball End Mill	Long Ball End Mill NSBL-2	SBD2LA Long Ball End Mill, 2-Flute, OK Coated	SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated	SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated	Solid ball end mill SBEL	Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63)	Carbide Mini Ball End Mill with 2 Flutes 2MNER	2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S	TSC series carbide ball end mill (R accuracy ±3μm)
From	₹ 3,011.00	₹ 1,854.07	₹ 5,912.42	₹ 2,168.82	₹ 1,260.11	₹ 3,008.00	₹ 1,320.00	₹ 1,829.96	₹ 4,117.65	₹ 10,797.96	₹ 2,182.20	₹ 7,570.91	₹ 1,028.98	₹ 25,989.95	₹ 1,854.07	₹ 1,879.53	₹ 2,552.85	₹ 2,143.38	₹ 5,333.44	₹ 5,054.84	₹ 11,008.84				₹ 3,991.73	₹ 28,086.85	₹ 19,114.84	₹ 1,496.45	₹ 9,244.85	₹ 3,112.00	₹ 2,079.09	₹ 3,751.00	₹ 16,016.80	₹ 2,168.82	₹ 22,997.73	₹ 3,196.15	₹ 9,706.93	₹ 6,434.80	₹ 6,434.80	₹ 1,558.82	₹ 8,379.60	₹ 12,070.96	₹ 4,590.53	₹ 1,830.54	₹ 3,231.25
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	9 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	Same day or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	9 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more
Specifications					TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 2 Flutes				High-Hardness Steel 2 Flutes			XAL General Steel 2 Flutes					TS General Steel 2 Flutes				TS General Steel 2 Flutes R (Regular)	TS General Steel 3 Flutes	TS General Steel 2 Flutes	TS High-Hardness Steel 3 Flutes																				TS General Steel 2 Flutes S (Short)
R Size(mm)	0.05 ～ 10	0.05 ～ 3	0.005 ～ 0.05	0.05 ～ 3	0.2 ～ 12.5	2 ～ 8	0.5 ～ 12.5	0.03 ～ 6	0.5 ～ 12.5	0.3 ～ 1	0.05 ～ 3	0.4 ～ 20	0.05 ～ 3	10	0.05 ～ 3	0.1 ～ 6	R0.75 ～ R10	0.15 ～ 5	0.05 ～ 0.475	0.5 ～ 10	0.2 ～ 0.5	0.2 ～ 8	0.5 ～ 3	0.05 ～ 3	0.5 ～ 3	0.2 ～ 1	0.2 ～ 1.5	0.1 ～ 6	0.5 ～ 6	0.1 ～ 6	0.1 ～ 3	0.05 ～ 3	0.05 ～ 1	0.05 ～ 6	0.01 ～ 0.05	0.3 ～ 3	3 ～ 6	1 ～ 12.5	1 ～ 12.5	0.5 ～ 12.5	0.5 ～ 15	0.5 ～ 8	0.75	0.1 ～ 3	1.5 ～ 3
Blade length (ℓ)(mm)	0.2 ～ 38	0.08 ～ 4.8	0.01 ～ 0.1	0.07 ～ 6	0.8 ～ 50	8 ～ 30	1 ～ 25	0.06 ～ 22	2 ～ 55	0.5 ～ 1.2	0.07 ～ 6	3 ～ 70	0.07 ～ 6	15	0.08 ～ 4.8	0.3 ～ 18	4 ～ 38	0.3 ～ 8	0.2 ～ 2.5	3 ～ 40	0.3 ～ 1	1.5 ～ 30	0.8 ～ 6	0.07 ～ 8	0.8 ～ 4.8	0.3 ～ 1.4	0.3 ～ 1.8	0.4 ～ 18	1 ～ 12	0.16 ～ 12	0.16 ～ 4.8	0.08 ～ 6	0.08 ～ 1.2	0.1 ～ 20	0.02 ～ 0.1	0.48 ～ 4.8	15 ～ 30	2 ～ 60	2 ～ 60	2 ～ 55	5 ～ 80	2 ～ 15	5	0.16 ～ 4.8	4.5 ～ 9
Underneck length (ℓ1)(mm)	-	0.3 ～ 60	-	0.3 ～ 50	-	-	2.2 ～ 50	-	-	1.5 ～ 5	0.2 ～ 50	-	0.2 ～ 60	-	0.3 ～ 60	-	-	2 ～ 60	-	-	1 ～ 10	17 ～ 80	7 ～ 60	0.2 ～ 60	20 ～ 50	1.2 ～ 5.5	1.2 ～ 6	-	2.5 ～ 30	1 ～ 80	0.5 ～ 40	0.3 ～ 50	0.3 ～ 10	-	-	2 ～ 40	-	14 ～ 21	14 ～ 21	-	-	20 ～ 61	-	0.5 ～ 20	-
Shank diameter (d)(mm)	4 ～ 20	3 ～ 6	4	4 ～ 6	3 ～ 25	4 ～ 16	4 ～ 25	4 ～ 12	4 ～ 25	4	4 ～ 6	4 ～ 32	3 ～ 6	12	3 ～ 6	4 ～ 12	3 ～ 20	4 ～ 12	3	4 ～ 20	6	4 ～ 16	4 ～ 8	3 ～ 8	4 ～ 8	4 ～ 6	4 ～ 6	4 ～ 12	6 ～ 12	4 ～ 16	4 ～ 6	3 ～ 6	4	4 ～ 12	4	4 ～ 6	6 ～ 12	6 ～ 25	6 ～ 25	4 ～ 25	4 ～ 32	6 ～ 16	4	4 ～ 6	6
Number of flutes(sheet)	2	2	1	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	2	3	2	2	2	2	2	2	2	2	2	1	3	2	2	2	2	2	2 ～ 4	2	2	2
Overall Length (L)(mm)	40 ～ 160	45 ～ 120	45	45 ～ 120	40 ～ 180	100 ～ 250	40 ～ 180	50 ～ 110	60 ～ 180	50	45 ～ 120	45 ～ 180	50 ～ 110	58	45 ～ 120	50 ～ 110	50 ～ 160	50 ～ 110	40	40 ～ 105	54 ～ 57	50 ～ 140	50 ～ 110	40 ～ 110	70 ～ 110	50	45 ～ 50	35 ～ 70	50 ～ 80	45 ～ 160	45 ～ 90	45 ～ 120	50 ～ 53	50 ～ 100	50	50 ～ 90	120 ～ 180	80 ～ 230	80 ～ 230	60 ～ 180	45 ～ 150	75 ～ 150	40	35 ～ 50	60 ～ 90
work material	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]
R Precision(μm)	-0.007 to 0.003 ～ ±0.01	-0.005～0.005 ～ -0.002～0.002	0.002～-0.002	0.005～-0.005 ～ 0.01～-0.01	±0.01	±0.01	±5 ～ ±10	-0.007～0.007 ～ -0.002～0.002	-10～+10	±0.005	0.005～-0.005	±0.02	-0.007 ~ +0.003 ～ ±0.005	-0.01～+0.01	-0.005～0.005 ～ -0.002～0.002	-0.007～0.007 ～ -0.005～0.005	±0.01	-0.007 ~ +0.003 ～ ±0.005	-	±0.01	-	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-	-0.005～+0.005	-0.007～+0.003 ～ -0.005～+0.005	-0.015～+0.015 ～ -0.01	-0.005 to +0.005 ～ -0.005～+0.005	-0.005～+0.005	-0.005～+0.005	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	-	-0.007～0.007 ～ -0.005～0.005	0.02～-0.02	-	-	-10～+10	0～-50	-	-	±3 ～ ±5	-0.005 ~ +0.001 ～ ±0.003
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface	-	-	Curved surface / Side / Engraving / R Groove
Coating	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	Non-Coated	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiCN	TiCN	TiAlN	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Other	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	Non-Coated	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	TiCN	Non-Coated	TiAlN	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Other	Non-Coated	-	For High Hardness (Silicon Group)
Type	Ball	Long-Neck Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Long-Neck Ball	Spherical Ball	Long-Neck Ball	Ball	Ball	Tapered neck ball	Ball	Ball	Long-Neck Ball	Ball	Tapered neck ball	Long-Neck Ball	Tapered neck ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball

Loading...