Carbide Ball End Mills（work material：general steel Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WX-LN-EBD

  OSG

  A long neck ball where the effective length can be selected to suit the machining shape. The high toughness carbide base material achieves stable cutting for a wide range of processing.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: ₹ 3,793.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 0.75	0.3 ～ 2.5	-	4	2	50	general steel[○]	-0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 2,004.09
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HBL, HM Coated 2-Flute Long Shank Ball

  UNION TOOL

  [Features]
  · Long Shank Ball End Middle Series Supporting High-Hardness Materials
  · Uses HardMax coating compatible with high-speed machining of high-hardness materials
  · Capable of stable, long-life machining for both dry and wet type

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	4.5 ～ 25	-	3 ～ 12	2	80 ～ 200	general steel[○]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 6,039.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLB, HM Coat, 2-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]
  · Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
  · Provides unprecedented long life and can be used for both dry and wet applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 3	0.64 ～ 4.8	3 ～ 30	4 ～ 6	2	45 ～ 80	general steel[○]	-0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 1,945.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]

  UNION TOOL

  [Features]
  · 3-flute type achieves remarkably high feed. Shortens the roughing time
  · Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased
  · Designed with 3-flute variable split to suppress chatter.
  · It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC
  · Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.9 ～ 18	-	4 ～ 12	3	50 ～ 120	general steel[◎]	-0.01～0.01 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: ₹ 3,158.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSB200 CBN Super Speed Ball End Mill

  NS TOOL

  High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of use

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.3 ～ 5	4	2	52 ～ 53	general steel[○]	0.005～-0.005 ～ 3 to -3	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSBL200 CBN Super Speed Long Neck Ball End Mill

  NS TOOL

  Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 1	0.08 ～ 1.2	0.3 ～ 10	4	2	50 ～ 53	general steel[○]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 16,016.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SFB200 CBN Super Finish Ball End Mill

  NS TOOL

  The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.5 ～ 5	4	2	50 ～ 52	general steel[○]	0.003～-0.003 ～ 0.005～-0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 19,239.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)

  NS TOOL

  Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 15	4 ～ 6	2	35 ～ 45	general steel[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,121.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH230 2-Flute Ball-End Mill for High-Hardness

  NS TOOL

  Standard type ball end mill for high hardness. Ideal for finishing

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 100	general steel[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 2,168.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH345 3-Flute Ball-End Mill for High-Hardness

  NS TOOL

  Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	1.5 ～ 10	-	6	3	60 ～ 80	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 5,990.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

  NS TOOL

  The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.01 ～ 0.05	0.02 ～ 0.1	-	4	1	50	general steel[○]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 22,997.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

  NS TOOL

  World's smallest ball end mill "Micro Ball" extends the microfabrication area

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.005 ～ 0.05	0.01 ～ 0.1	-	4	1	45	general steel[◎]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,912.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)

  NS TOOL

  Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.2 ～ 12	-	4 ～ 12	2	35 ～ 60	general steel[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 2,296.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

  NS TOOL

  Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1.5	0.15 ～ 2.5	0.5 ～ 20	4	2	35 ～ 50	general steel[◎]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: ₹ 2,436.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230S MUGEN-COATING Short Ball End Mill

  NS TOOL

  The high-rigidity design enables high speed machining without chattering

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.2 ～ 12	-	4 ～ 12	2	50 ～ 110	general steel[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 2,881.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBL230 MUGEN-COATING Long Ball End Mill

  NS TOOL

  Machining utilizing the benefits of a long shank is possible

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 5	0.5 ～ 25	-	3 ～ 10	2	70 ～ 200	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 7,182.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

  NS TOOL

  The tuned Infinity coating sustains high precision machining for a long time

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.1 ～ 10	-	4 ～ 6	2	50 ～ 80	general steel[◎]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,832.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels

  NS TOOL

  Large cutting depth can be set, with effective high-speed feed

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 15	4 ～ 6	2	50 ～ 60	general steel[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,501.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT COAT 2-Flute Long-Neck Ball CSLEB

  UNION TOOL

  [Features]
  · With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
  · New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
  · Supports a wide range from copper and raw materials to 55 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 60	3 ～ 6	2	45 ～ 120	general steel[◎]	-0.005～0.005 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	TiCN	Long-Neck Ball

  From: ₹ 1,854.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CFLB, UT Coat 3-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]
  · Provides amazing high feed compared to the conventional 2-flute long neck ball.
  · With new UTCOAT, outstanding lubricity and long life are achieved.
  · Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.
  · Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)
  · O.D. Tolerance: 0/-0.02

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.48 ～ 4.8	2 ～ 40	4 ～ 6	3	50 ～ 90	general steel[◎]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Long-Neck Ball

  From: ₹ 3,196.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long-Neck Ball End Mill (for Deep Ribs) NHB-2

  NS TOOL

  Supports three-dimensional precision deep engraving. Neck relief type suitable to narrow deep processing

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 3	0.6 ～ 6	6 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 5,635.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Miniature Ball End Mill NCB-2

  NS TOOL

  Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 0.9	0.8 ～ 3.6	-	3	2	35	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 6,000.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Miniature Ball-End Mill NCB-2X

  NS TOOL

  Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 0.9	0.8 ～ 3.6	-	3	2	35	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: ₹ 7,097.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Ball-End Mill NSB-2X

  NS TOOL

  Ideal for high-precision 3D processing. A universal type for roughing, semi-finishing and finishing

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	3 ～ 15	-	4 ～ 12	2	60 ～ 110	general steel[◎]	0.01～-0.01 ～ 0.02～-0.02	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: ₹ 6,148.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Ball End Mill NSBL-2

  NS TOOL

  The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	15 ～ 30	-	6 ～ 12	2	120 ～ 180	general steel[◎]	0.02～-0.02	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 9,706.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230

  NS TOOL

  Infinity coating has been adopted for the extra long ball end mill. Machining utilizing the benefits of a long shank is possible

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 5	2.5 ～ 25	-	3 ～ 10	2	100 ～ 250	general steel[◎]	0.02～-0.02	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 10,900.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 3-Flute WXS

  OSG

  A long neck ball end mill with a WXS coat.
  A corner radius shape that achieves both cutting force and cutting edge rigidity.
  Peripheral cutting edge and bottom cutting edge specifications to suppress chattering vibration.
  A special edge line prevents encroachment.
  Optimal chip gullet for excellent chip removal capability.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.75 ～ 4.5	4 ～ 30	4 ～ 6	3	50 ～ 70	general steel[○]	±0.07	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 2,953.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Hole Ball End Mill 2-Flute, Standard Type

  EIKOSHA

  Graphite Electrode Milling, with Air Wheel

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 12.5	20 ～ 60	-	6 ～ 25	2	70 ～ 180	general steel[○]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 8,219.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCBE SA Coating Carbide 2-Flute Ball-Nose

  SANKO MFG

  [Features]
  · Machining is possible with a wide range of materials, from raw materials to hardened steel.
  · Also capable of high-speed machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 12.5	0.9 ～ 50	-	3 ～ 25	2	50 ～ 180	general steel[◎]	0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 5,865.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCBELS SA Coating Carbide 2-Flute Ball-Nose Long Shank

  SANKO MFG

  Machining is possible with a wide range of materials, from raw materials to hardened steel. The long shank allows for machining in deep sections.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 12.5	4.5 ～ 80	-	3 ～ 25	2	100 ～ 230	general steel[◎]	0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 8,114.40
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCBE4T SA Coated Carbide 4-Flute Ball

  SANKO MFG

  Machining is possible with a wide range of materials, from raw materials to hardened steel. 4-flute blade enables high-speed and high-efficiency machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	12 ～ 25	-	6 ～ 12	4	80 ～ 110	general steel[◎]	0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 8,989.02
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GCBE 2-Flute Carbide Ball

  SANKO MFG

  Machining of hardened steel, high-speed machining, and high-efficiency machining are possible.
  Helix angle: Standard helix (30 to 44°)
  R Accuracy (µm)-30 to 0

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 10	0.9 ～ 40	-	3 ～ 20	2	50 ～ 160	general steel[○]	0～-0.03	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,376.67
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Ball End Mill, 2-Flute

  ATOM

  Supports a wide range of applications, from general steel to nonferrous metals and resins. High sharpness without coating achieves high-precision and high-quality finished surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	3 ～ 40	-	4 ～ 20	2	40 ～ 105	general steel[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,054.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Ball End Mill, 4-Flute

  ATOM

  Supports a wide range of applications, from general steel to nonferrous metals and resins. A multi-purpose type with support from rough machining to finish machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	3 ～ 40	-	4 ～ 20	2	40 ～ 105	general steel[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,768.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BEM2 ball end mill G2

  ASAHI TOOLS

  Up to R4.5 specification products (solid tip) have a torsional shape on the rounded section as well, resulting in corners with improved profiling efficiency, which are ideal for rounding.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 20	9 ～ 80	-	10 ～ 32	2	100 ～ 220	general steel[○]	-	Curved surface / R Groove	Non-Coated	Ball

  From: ₹ 13,387.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BEM2 Long Shank Ball End Mill G2

  ASAHI TOOLS

  2-flute ball end mill long shank type. Ideal for rounding corners.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5 ～ 15	30 ～ 60	-	12 ～ 32	2	130 ～ 240	general steel[○]	-	Curved surface / R Groove	Non-Coated	Ball

  From: ₹ 17,788.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2 Ball End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 55	-	4 ～ 25	2	60 ～ 180	general steel[◎]	-10～+10	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 4,117.65
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2L Long Ball End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  [Features]
  A carbide long ball end mill with 2 flutes.
  The deep rib type prevents tool interference during deep cutting.
  The long shank enables end milling over a wide area.
  [Applications]
  Suitable for curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	general steel[◎]	-	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,442.31
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LA Long Ball End Mill, 2-Flute, OK Coated

  OKAZAKI SEIKO

  [Features]
  A carbide long ball end mill with 2 flutes.
  The deep rib type prevents tool interference during deep cutting.
  The long shank allows for a wide range of die milling.
  [Applications]
  Suitable for curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	general steel[◎]	-	Curved surface / Engraving / R Groove	TiAlN	Ball

  From: ₹ 6,434.80
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	general steel[○]	-	Curved surface / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 6,434.80
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated

  OKAZAKI SEIKO

  Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 55	-	4 ～ 25	2	60 ～ 180	general steel[◎]	-10～+10	Curved surface / Engraving / R Groove	TiAlN	Ball

  From: ₹ 1,558.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill SBEL

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	5 ～ 80	-	4 ～ 32	2	45 ～ 150	general steel[○]	0～-50	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 8,379.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill L S-SBE

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 15	4 ～ 70	-	4 ～ 32	2	140 ～ 250	general steel[○]	-	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 15,371.20
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball (Slim Shank) DZ-OCUB

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	9 ～ 30	5.8 ～ 7.8	5 ～ 18	2	120 ～ 180	general steel[○/◎]	10～-10	Curved surface / R Groove	TiAlN	Ball

  From: ₹ 5,778.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	OSG	EIKOSHA	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	ATOM	ATOM	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET
Product Series	Long Neck Ball Type, 2-Flute WX-LN-EBD	HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]	HBL, HM Coated 2-Flute Long Shank Ball	HLB, HM Coat, 2-Flute Long Neck Ball End Mill	CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]	SSB200 CBN Super Speed Ball End Mill	SSBL200 CBN Super Speed Long Neck Ball End Mill	SFB200 CBN Super Finish Ball End Mill	MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)	MSBH230 2-Flute Ball-End Mill for High-Hardness	MSBH345 3-Flute Ball-End Mill for High-Hardness	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining	MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)	MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)	MSB230S MUGEN-COATING Short Ball End Mill	MSBL230 MUGEN-COATING Long Ball End Mill	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels	UT COAT 2-Flute Long-Neck Ball CSLEB	CFLB, UT Coat 3-Flute Long Neck Ball End Mill	Long-Neck Ball End Mill (for Deep Ribs) NHB-2	Miniature Ball End Mill NCB-2	X Coated Miniature Ball-End Mill NCB-2X	X Coated Ball-End Mill NSB-2X	Long Ball End Mill NSBL-2	MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230	Long Neck Ball Type, 3-Flute WXS	Carbide Air Hole Ball End Mill 2-Flute, Standard Type	SAGCBE SA Coating Carbide 2-Flute Ball-Nose	SAGCBELS SA Coating Carbide 2-Flute Ball-Nose Long Shank	SAGCBE4T SA Coated Carbide 4-Flute Ball	GCBE 2-Flute Carbide Ball	Standard Ball End Mill, 2-Flute	Standard Ball End Mill, 4-Flute	BEM2 ball end mill G2	BEM2 Long Shank Ball End Mill G2	SBD2 Ball End Mill, 2-Flute, Non-Coated	SBD2L Long Ball End Mill, 2-Flute, Non-Coated	SBD2LA Long Ball End Mill, 2-Flute, OK Coated	SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated	SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated	Solid ball end mill SBEL	Solid ball end mill L S-SBE	One Cut Ball (Slim Shank) DZ-OCUB
From	₹ 3,793.51	₹ 2,004.09	₹ 6,039.69	₹ 1,945.16	₹ 3,158.65		₹ 16,016.80	₹ 19,239.38	₹ 3,121.13	₹ 2,168.82	₹ 5,990.11	₹ 22,997.73	₹ 5,912.42	₹ 2,296.05	₹ 2,436.69	₹ 2,881.36	₹ 7,182.16	₹ 3,832.35	₹ 3,501.51	₹ 1,854.07	₹ 3,196.15	₹ 5,635.16	₹ 6,000.82	₹ 7,097.78	₹ 6,148.15	₹ 9,706.93	₹ 10,900.33	₹ 2,953.71	₹ 8,219.05	₹ 5,865.56	₹ 8,114.40	₹ 8,989.02	₹ 5,376.67	₹ 5,054.84	₹ 5,768.75	₹ 13,387.60	₹ 17,788.84	₹ 4,117.65	₹ 5,442.31	₹ 6,434.80	₹ 6,434.80	₹ 1,558.82	₹ 8,379.60	₹ 15,371.20	₹ 5,778.49
Days to Ship	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more
R Size(mm)	0.1 ～ 3	0.1 ～ 0.75	1.5 ～ 6	0.4 ～ 3	0.3 ～ 6	0.1 ～ 1	0.05 ～ 1	0.1 ～ 1	0.1 ～ 3	0.05 ～ 6	0.5 ～ 3	0.01 ～ 0.05	0.005 ～ 0.05	0.1 ～ 6	0.1 ～ 1.5	0.1 ～ 6	0.1 ～ 5	0.05 ～ 3	0.1 ～ 3	0.05 ～ 3	0.3 ～ 3	0.4 ～ 3	0.2 ～ 0.9	0.2 ～ 0.9	1 ～ 6	3 ～ 6	0.5 ～ 5	0.5 ～ 3	2 ～ 12.5	0.3 ～ 12.5	1.5 ～ 12.5	3 ～ 6	0.3 ～ 10	0.5 ～ 10	0.5 ～ 10	2 ～ 20	5 ～ 15	0.5 ～ 12.5	1 ～ 12.5	1 ～ 12.5	1 ～ 12.5	0.5 ～ 12.5	0.5 ～ 15	1 ～ 15	3 ～ 10
Blade length (ℓ)(mm)	0.16 ～ 4.8	0.3 ～ 2.5	4.5 ～ 25	0.64 ～ 4.8	0.9 ～ 18	0.15 ～ 1.2	0.08 ～ 1.2	0.15 ～ 1.2	0.2 ～ 6	0.1 ～ 20	1.5 ～ 10	0.02 ～ 0.1	0.01 ～ 0.1	0.2 ～ 12	0.15 ～ 2.5	0.2 ～ 12	0.5 ～ 25	0.1 ～ 10	0.2 ～ 6	0.08 ～ 4.8	0.48 ～ 4.8	0.6 ～ 6	0.8 ～ 3.6	0.8 ～ 3.6	3 ～ 15	15 ～ 30	2.5 ～ 25	0.75 ～ 4.5	20 ～ 60	0.9 ～ 50	4.5 ～ 80	12 ～ 25	0.9 ～ 40	3 ～ 40	3 ～ 40	9 ～ 80	30 ～ 60	2 ～ 55	2 ～ 60	2 ～ 60	2 ～ 60	2 ～ 55	5 ～ 80	4 ～ 70	9 ～ 30
Underneck length (ℓ1)(mm)	0.5 ～ 50	-	-	3 ～ 30	-	0.3 ～ 5	0.3 ～ 10	0.5 ～ 5	0.5 ～ 15	-	-	-	-	-	0.5 ～ 20	-	-	-	0.5 ～ 15	0.3 ～ 60	2 ～ 40	6 ～ 50	-	-	-	-	-	4 ～ 30	-	-	-	-	-	-	-	-	-	-	14 ～ 21	14 ～ 21	14 ～ 21	-	-	-	5.8 ～ 7.8
Shank diameter (d)(mm)	4 ～ 6	4	3 ～ 12	4 ～ 6	4 ～ 12	4	4	4	4 ～ 6	4 ～ 12	6	4	4	4 ～ 12	4	4 ～ 12	3 ～ 10	4 ～ 6	4 ～ 6	3 ～ 6	4 ～ 6	4 ～ 6	3	3	4 ～ 12	6 ～ 12	3 ～ 10	4 ～ 6	6 ～ 25	3 ～ 25	3 ～ 25	6 ～ 12	3 ～ 20	4 ～ 20	4 ～ 20	10 ～ 32	12 ～ 32	4 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	4 ～ 25	4 ～ 32	4 ～ 32	5 ～ 18
Number of flutes(sheet)	2	2	2	2	3	2	2	2	2	2	3	1	1	2	2	2	2	2	2	2	3	2	2	2	2	2	2	3	2	2	2	4	2	2	2	2	2	2	2	2	2	2	2	2	2
Overall Length (L)(mm)	45 ～ 120	50	80 ～ 200	45 ～ 80	50 ～ 120	52 ～ 53	50 ～ 53	50 ～ 52	35 ～ 45	50 ～ 100	60 ～ 80	50	45	35 ～ 60	35 ～ 50	50 ～ 110	70 ～ 200	50 ～ 80	50 ～ 60	45 ～ 120	50 ～ 90	45 ～ 120	35	35	60 ～ 110	120 ～ 180	100 ～ 250	50 ～ 70	70 ～ 180	50 ～ 180	100 ～ 230	80 ～ 110	50 ～ 160	40 ～ 105	40 ～ 105	100 ～ 220	130 ～ 240	60 ～ 180	80 ～ 230	80 ～ 230	80 ～ 230	60 ～ 180	45 ～ 150	140 ～ 250	120 ～ 180
work material	general steel[◎]	general steel[○]	general steel[○]	general steel[○]	general steel[◎]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[◎]	general steel[◎]	general steel[○]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[○]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[◎]	general steel[○]	general steel[○]	general steel[○/◎]
R Precision(μm)	-0.01～+0.01	-0.005～0.005	-0.007～0.007 ～ -0.005～0.005	-0.002～0.002	-0.01～0.01 ～ -0.005～0.005	0.005～-0.005 ～ 3 to -3	0.005～-0.005	0.003～-0.003 ～ 0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	-	0.002～-0.002	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	0.002～-0.002	0.005～-0.005 ～ 0.01～-0.01	-0.005～0.005 ～ -0.002～0.002	-0.007～0.007 ～ -0.005～0.005	0.01～-0.01	0.01～-0.01	0.01～-0.01	0.01～-0.01 ～ 0.02～-0.02	0.02～-0.02	0.02～-0.02	±0.07	±0.02	0～-0.03	0～-0.03	0～-0.03	0～-0.03	±0.01	±0.01	-	-	-10～+10	-	-	-	-10～+10	0～-50	-	10～-10
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / R Groove
Coating	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	Non-Coated	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiCN	TiCN	Non-Coated	Non-Coated	TiCN	TiCN	Non-Coated	TiAlN	For High Hardness (Silicon Group)	-	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	TiAlN
Type	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...