Carbide Ball End Mills（Machining Application：Engraving Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Hole Ball End Mill 4-Flute, Standard Type

  EIKOSHA

  Graphite Electrode Milling, with Air Wheel

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 12.5	20 ～ 60	-	6 ～ 25	4	70 ～ 180	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	±0.02	Engraving	-	Ball

  From: ₹ 8,989.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Hole Ball End Mill 4-Flute, Long Type

  EIKOSHA

  Graphite Electrode Milling, Long, with Air Wheel

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 12.5	40 ～ 80	-	6 ～ 25	4	150 ～ 250	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	±0.02	Engraving	-	Ball

  From: ₹ 16,427.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Rib for Resin Processing PRB-2

  KYOWA SEIKO

  Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2.5	0.3 ～ 6	-	4 ～ 6	2	45 ～ 100	Aluminum[◎] / Resin[◎]	＋0.01～－0.01	Engraving	-	Ball

  From: ₹ 4,624.89
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPB220 CBN Super Spiral Ball End Mill

  NS TOOL

  [Features]
  · Spiral ball shape used to improve sharpness of cutting edge.
  · The cutting edge shape used improves the chipping resistance of the cutting edge.
  · When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
  Torsion angle: 20°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.15 ～ 3.6	0.3 ～ 18	4	2	50 ～ 70	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	0.05～-0.05 ～ 5 to -5	Engraving	Non-Coated	Ball

  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Blade Sander Ball

  WIDIN

  [Features]
  · Compatible with soft materials and aluminum alloys with a blade shape that emphasizes sharpness.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  R0.75 ～ R10	4 ～ 38	-	3 ～ 20	2	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]	±0.01	Engraving	TiAlN	Ball

  From: ₹ 2,552.85
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]
  ·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality
  ·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.005 ~ +0.001 ～ ±0.003	Engraving	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,231.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. High precision tools with little quality variation are ideal for high precision 3D machining of molds
  ·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 2	0.6 ～ 4	-	6	2	40	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.003	Engraving	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,564.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

  MISUMI

  [Features]
  ·Compatible with shrink fit chucks for high-precision machining
  ·Designed with short flute length and overall length for shrink fit and emphasis on rigidity
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	-	4 ～ 12	2	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Engraving	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,397.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Long shank type, ideal for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Engraving	TiAlN	Ball

  From: ₹ 3,008.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 2-Flute / Short Type

  MISUMI

  [Features]
  ·Good finish can be expected for surface coarse of workpiece after processing
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 25	15 ～ 75	3 ～ 20	2	40 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Engraving	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, regular model

  MISUMI

  [Features]
  ·Regular bridge length allows for many regrinding times
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	17 ～ 80	4 ～ 16	2	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Engraving	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

  MISUMI

  A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 5	-	4 ～ 55	6 ～ 10	2	70 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Engraving	For High Hardness (Silicon Group)	Long-Neck Ball / Spherical Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / short model

  MISUMI

  [Features]
  ·3-flute shape is resistant to chattering and enables high feed
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	2 ～ 25	15 ～ 75	6 ～ 20	3	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Engraving	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / regular model

  MISUMI

  [Features]
  ·3-flute shape is resistant to chattering and enables high feed
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Engraving	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide ball end mill, 2-flute / short model

  MISUMI

  Highly versatile due to the non-coated specification

  • Non-Coated
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 10	0.8 ～ 25	-	3 ～ 20	2	40 ～ 150	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	±0.01	Engraving	Non-Coated	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

  MISUMI

  [Features]
  ·High-feed, high stiffness 3-flute taper shape with taper length
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 6	7 ～ 60	4 ～ 8	3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Engraving	For High Hardness (Silicon Group)	Tapered neck ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 3-flute / long neck model

  MISUMI

  [Features]
  ·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	3 ～ 50	4 ～ 6	2 ～ 3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Engraving	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 4-flute / long neck model

  MISUMI

  [Features]
  ·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 3	1.6 ～ 6	4 ～ 30	4 ～ 6	4	50 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Engraving	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

  MISUMI

  [Features]
  ·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).
  ·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5	1 ～ 5	5 ～ 10	6 ～ 10	2	50 ～ 90	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	±0.01	Engraving	For High Hardness (Silicon Group)	Ball

  From: ₹ 5,879.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  • TS
  • High-Hardness Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.6 ～ 6	-	6	2	40	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	-0.005 ~ +0.001 ～ ±0.003	Engraving	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,566.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

  MISUMI

  [Features]
  ·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
  ·Taper neck is effective in suppressing chattering
  ·Machining of high hardness steel up to 65HRC is possible
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	20 ～ 50	4 ～ 8	3	70 ～ 110	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	-0.007 ~ +0.003 ～ ±0.005	Engraving	For High Hardness (Silicon Group)	Tapered neck ball

  From: ₹ 3,991.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model

  MISUMI

  Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity

  • CrN
  • Copper
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Aluminum[○] / Copper[◎] / Resin[○]	±0.01	Engraving	CrN	Ball

  From: ₹ 2,252.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model

  MISUMI

  CrN coated products that are ideal for copper electrode processing are available at affordable prices

  • CrN
  • Copper
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 2	0.4 ～ 4	2 ～ 40	4 ～ 6	2	50 ～ 110	Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	±0.005	Engraving	CrN	Long-Neck Ball

  From: ₹ 2,138.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute

  MISUMI

  Diamond coated products that exert tremendous durability are available in the industry's lowest price

  • DIA
  • Graphite
  • 2 Flutes
  • L (Long)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	3 ～ 55	20 ～ 65	4 ～ 12	2	50 ～ 200	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Engraving	Dia Coat	Ball

  From: ₹ 5,727.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)

  MISUMI

  Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!

  • DIA
  • Graphite
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 3	0.6 ～ 7.5	2 ～ 60	4 ～ 6	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Engraving	Dia Coat	Long-Neck Ball

  From: ₹ 4,674.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model

  MISUMI

  Sharp edge that's suitable for machining resin

  • Non-Coated
  • Resin
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	±0.01	Engraving	Non-Coated	Ball

  From: ₹ 1,831.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
  · Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	1 ～ 25	2.2 ～ 50	4 ～ 25	2	40 ～ 180	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	±5 ～ ±10	Engraving	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,320.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball Long Shank 2GEOLSR

  NACHI(FUJIKOSHI)

  [Features]
  A carbide end mill with 2 flutes.
  The high cutting speed and high production efficiency lead to overall production cost reduction.
  The long shank allows contouring at deep positions and can be lengthened to suit the application.
  [Applications]
  Suitable for side milling, curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	10 ～ 100	4 ～ 32	2	80 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	0～-0.04 ～ 0～-0.03	Engraving	TiAlN	Ball

  From: ₹ 6,920.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Mold Finish Master BNBP

  NACHI(FUJIKOSHI)

  ·CBN ball end mill.
  ·Suitable for high-speed finishing of high-hardness material dies.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1	0.3 ～ 1.4	1.2 ～ 5.5	4 ～ 6	2	50	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-	Engraving	-	Ball

  From: ₹ 28,086.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Mill, Ball 2DLCR

  NACHI(FUJIKOSHI)

  End mill for aluminum and copper alloys. Suitable for curved surface processing.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	1.5 ～ 30	3 ～ 50	4 ～ 20	2	50 ～ 180	Aluminum[◎] / Copper[○]	0～-0.04 ～ 0～-0.03	Engraving	DLC	Ball

  From: ₹ 5,843.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Ball GSBH

  NACHI(FUJIKOSHI)

  Suitable for high-speed finishing of high-hardness molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	0.6 ～ 7.5	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-	Engraving	TiAlN	Ball

  From: ₹ 6,542.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Ball 2GSR

  NACHI(FUJIKOSHI)

  Supports a wide range of materials from raw materials to hardened materials. Suitable for processing of curved surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5	15	-	10	2	100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	-0.01～+0.01	Engraving	TiAlN	Ball

  From: ₹ 7,636.31
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mold Meister Ball 2MMR

  NACHI(FUJIKOSHI)

  Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	-0.003～+0.003	Engraving	TiAlN	Ball

  From: ₹ 15,674.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball 2GEOR

  NACHI(FUJIKOSHI)

  Supports a wide range of applications from mold steel to high-hardness steel. Ideal for finishing molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	3 ～ 80	4 ～ 32	2	50 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	0～-0.04 ～ 0～-0.03	Engraving	TiAlN	Ball

  From: ₹ 5,931.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute for Graphite DG-EBD

  OSG

  End mill with diamond coating dedicated for graphite.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 6	8 ～ 60	-	4 ～ 12	2	80 ～ 200	Aluminum[○] / Graphite[◎] / Resin[◎]	-0.01～+0.01	Engraving	DG	Ball

  From: ₹ 17,251.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CRN-EBD-3

  OSG

  A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1.5	0.4 ～ 8	-	3	2	40	Aluminum[○] / Copper[◎] / Resin[◎]	-0.01～+0.01	Engraving	CrN	Ball

  From: ₹ 8,319.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD-3

  OSG

  A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.
  Coated for steel
  Standard/Alteration category: Manufacturer's standard product
  Number of flutes (pcs.) 2
  Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)
  R Accuracy (µm) ±10

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.8 ～ 8	-	3	2	40	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.01～+0.01	Engraving	TiAlN	Ball

  From: ₹ 10,043.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute MG-EBD-3

  OSG

  Uses high-toughness carbide with high transverse rupture strength.
  Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 1.5	0.2 ～ 8	-	3	2	40	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	Engraving	Non-Coated	Ball

  From: ₹ 6,899.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-EBD

  OSG

  2-Flute Ball End Type CBN-EBD
  ·Demonstrates high performance in machining high-rigid materials and cast iron
  ·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	4 ～ 7	20	6 ～ 12	2	90 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	-0.01～+0.01	Engraving	Non-Coated	Ball

  From: ₹ 35,727.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-SXB

  OSG

  Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.3 ～ 1.8	1.2 ～ 6	4 ～ 6	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-0.005～+0.005	Engraving	Non-Coated	Ball

  From: ₹ 19,114.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute DIA-EBD

  OSG

  Allows both high-speed machining and dry cutting of aluminum. Also, great extension of tool life even in graphite processing has been achieved.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	2.5 ～ 22	-	4 ～ 12	2	60 ～ 140	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	-	Engraving	Dia Coat	Ball

  From: ₹ 20,609.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute DIA-EBD-SF

  OSG

  Demonstrates excellent durability when processing graphite, aluminum, etc.
  Work Material: Aluminum/Copper/Graphite
  For coating non-ferrous metals (Diamond coating)
  Standard/Alteration category: Manufacturer's standard product
  Number of flutes (pcs.) 2
  Shank diameter (mm) 6

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5 ～ 6	10 ～ 12	-	6	2	32 ～ 34	Aluminum[◎] / Copper[○] / Graphite[◎]	-	Engraving	Dia Coat	Ball

  From: ₹ 46,959.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute DLC-EBD

  OSG

  Ultra-smooth DLC coating prevents welding adhesion. Achieves high speed in shape machining of aluminum alloys, while also obtaining a smooth surface finish.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	2.5 ～ 38	-	4 ～ 20	2	50 ～ 160	Aluminum[◎] / Copper[○] / Resin[◎]	-0.01～+0.01	Engraving	DLC	Ball

  From: ₹ 8,983.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD

  OSG

  Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	2.5 ～ 55	-	4 ～ 25	2	50 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.01～+0.01	Engraving	TiAlN	Ball

  From: ₹ 9,890.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute MG-EBD

  OSG

  High toughness carbide alloy is used, providing a long service life at medium to low speeds

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  6.5 ～ 12.5	26 ～ 50	-	12 ～ 25	2	110 ～ 180	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	Engraving	Non-Coated	Ball

  From: ₹ 39,182.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	EIKOSHA	EIKOSHA	KYOWA SEIKO	NS TOOL	WIDIN	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Carbide Air Hole Ball End Mill 4-Flute, Standard Type	Carbide Air Hole Ball End Mill 4-Flute, Long Type	Carbide Ball End Mill for Rib for Resin Processing PRB-2	SSPB220 CBN Super Spiral Ball End Mill	2-Blade Sander Ball	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC Series Carbide Ball End Mill 2-Flute / Short Type	TSC series carbide ball end mill, regular model	TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	Carbide ball end mill, 2-flute / short model	TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model	TSC series carbide long neck ball end mill, 3-flute / long neck model	TSC series carbide long neck ball end mill, 4-flute / long neck model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model	CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)	Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model	XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type	X's Mill Geo Ball Long Shank 2GEOLSR	CBN Mold Finish Master BNBP	DLC Mill, Ball 2DLCR	GS MILL Hard Ball GSBH	GS MILL Ball 2GSR	Mold Meister Ball 2MMR	X's Mill Geo Ball 2GEOR	Ball End Type, 2-Flute for Graphite DG-EBD	Ball End Type, 2-Flute CRN-EBD-3	Ball End Type, 2-Flute FX-MG-EBD-3	Ball End Type, 2-Flute MG-EBD-3	Ball End Type, 2-Flute CBN-EBD	Ball End Type, 2-Flute CBN-SXB	Ball End Type, 2-Flute DIA-EBD	Ball End Type, 2-Flute DIA-EBD-SF	Ball End Type, 2-Flute DLC-EBD	Ball End Type, 2-Flute FX-MG-EBD	Ball End Type, 2-Flute MG-EBD
From	₹ 8,989.20	₹ 16,427.60	₹ 4,624.89		₹ 2,552.85	₹ 3,231.25	₹ 3,564.45	₹ 1,397.93	₹ 3,008.00										₹ 5,879.24	₹ 3,566.73	₹ 3,991.73	₹ 2,252.40	₹ 2,138.04	₹ 5,727.98	₹ 4,674.82	₹ 1,831.31	₹ 1,320.00	₹ 6,920.98	₹ 28,086.85	₹ 5,843.55	₹ 6,542.71	₹ 7,636.31	₹ 15,674.47	₹ 5,931.73	₹ 17,251.75	₹ 8,319.33	₹ 10,043.13	₹ 6,899.56	₹ 35,727.35	₹ 19,114.84	₹ 20,609.60	₹ 46,959.51	₹ 8,983.67	₹ 9,890.44	₹ 39,182.98
Days to Ship	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications						TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	Non-Coated General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes	TS General Steel 3 Flutes	TS General Steel 4 Flutes	TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes	CrN Copper 2 Flutes S (Short)	CrN Copper 2 Flutes	DIA Graphite 2 Flutes L (Long)	DIA Graphite 2 Flutes	Non-Coated Resin 2 Flutes S (Short)
R Size(mm)	2 ～ 12.5	3 ～ 12.5	0.1 ～ 2.5	0.1 ～ 3	R0.75 ～ R10	1.5 ～ 3	0.3 ～ 2	0.2 ～ 6	2 ～ 8	0.05 ～ 10	0.2 ～ 8	0.5 ～ 5	0.5 ～ 10	1 ～ 6	0.2 ～ 10	0.5 ～ 3	0.5 ～ 3	1 ～ 3	1 ～ 5	0.3 ～ 3	0.5 ～ 3	0.5 ～ 6	0.2 ～ 2	0.5 ～ 6	0.2 ～ 3	0.5 ～ 6	0.5 ～ 12.5	0.5 ～ 15	0.2 ～ 1	0.5 ～ 10	0.2 ～ 6	5	0.5 ～ 6	0.5 ～ 15	2 ～ 6	0.1 ～ 1.5	0.2 ～ 1.5	0.05 ～ 1.5	3 ～ 6	0.2 ～ 1.5	0.5 ～ 6	5 ～ 6	0.5 ～ 10	0.5 ～ 15	6.5 ～ 12.5
Blade length (ℓ)(mm)	20 ～ 60	40 ～ 80	0.3 ～ 6	0.15 ～ 3.6	4 ～ 38	4.5 ～ 9	0.6 ～ 4	0.4 ～ 12	8 ～ 30	0.2 ～ 25	1.5 ～ 30	-	2 ～ 25	5 ～ 22	0.8 ～ 25	0.8 ～ 6	0.8 ～ 4.8	1.6 ～ 6	1 ～ 5	0.6 ～ 6	0.8 ～ 4.8	1.5 ～ 18	0.4 ～ 4	3 ～ 55	0.6 ～ 7.5	1.5 ～ 18	1 ～ 25	1.5 ～ 45	0.3 ～ 1.4	1.5 ～ 30	0.4 ～ 12	15	1.5 ～ 18	1.5 ～ 45	8 ～ 60	0.4 ～ 8	0.8 ～ 8	0.2 ～ 8	4 ～ 7	0.3 ～ 1.8	2.5 ～ 22	10 ～ 12	2.5 ～ 38	2.5 ～ 55	26 ～ 50
Underneck length (ℓ1)(mm)	-	-	-	0.3 ～ 18	-	-	-	-	-	15 ～ 75	17 ～ 80	4 ～ 55	15 ～ 75	17 ～ 72	-	7 ～ 60	3 ～ 50	4 ～ 30	5 ～ 10	-	20 ～ 50	-	2 ～ 40	20 ～ 65	2 ～ 60	-	2.2 ～ 50	10 ～ 100	1.2 ～ 5.5	3 ～ 50	0.6 ～ 7.5	-	-	3 ～ 80	-	-	-	-	20	1.2 ～ 6	-	-	-	-	-
Shank diameter (d)(mm)	6 ～ 25	6 ～ 25	4 ～ 6	4	3 ～ 20	6	6	4 ～ 12	4 ～ 16	3 ～ 20	4 ～ 16	6 ～ 10	6 ～ 20	6 ～ 12	3 ～ 20	4 ～ 8	4 ～ 6	4 ～ 6	6 ～ 10	6	4 ～ 8	4 ～ 12	4 ～ 6	4 ～ 12	4 ～ 6	4 ～ 12	4 ～ 25	4 ～ 32	4 ～ 6	4 ～ 20	4 ～ 12	10	4 ～ 12	4 ～ 32	4 ～ 12	3	3	3	6 ～ 12	4 ～ 6	4 ～ 12	6	4 ～ 20	4 ～ 25	12 ～ 25
Number of flutes(sheet)	4	4	2	2	2	2	2	2	2	2	2	2	3	3	2	3	2 ～ 3	4	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2
Overall Length (L)(mm)	70 ～ 180	150 ～ 250	45 ～ 100	50 ～ 70	50 ～ 160	60 ～ 90	40	40 ～ 65	100 ～ 250	40 ～ 150	50 ～ 140	70 ～ 90	50 ～ 150	50 ～ 110	40 ～ 150	50 ～ 110	50 ～ 110	50 ～ 70	50 ～ 90	40	70 ～ 110	50 ～ 120	50 ～ 110	50 ～ 200	50 ～ 110	50 ～ 120	40 ～ 180	80 ～ 230	50	50 ～ 180	50 ～ 110	100	50 ～ 120	50 ～ 200	80 ～ 200	40	40	40	90 ～ 110	45 ～ 50	60 ～ 140	32 ～ 34	50 ～ 160	50 ～ 180	110 ～ 180
work material	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	Aluminum[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Copper[○]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Aluminum[○] / Graphite[◎] / Resin[◎]	Aluminum[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	Aluminum[◎] / Copper[○] / Graphite[◎]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
R Precision(μm)	±0.02	±0.02	＋0.01～－0.01	0.05～-0.05 ～ 5 to -5	±0.01	-0.005 ~ +0.001 ～ ±0.003	±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	±0.01	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.005	±0.01	±0.01	±0.01	±5 ～ ±10	0～-0.04 ～ 0～-0.03	-	0～-0.04 ～ 0～-0.03	-	-0.01～+0.01	-0.003～+0.003	0～-0.04 ～ 0～-0.03	-0.01～+0.01	-0.01～+0.01	-0.01～+0.01	-	-0.01～+0.01	-0.005～+0.005	-	-	-0.01～+0.01	-0.01～+0.01	-
Machining Application	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving
Coating	-	-	-	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	CrN	CrN	Dia Coat	Dia Coat	Non-Coated	For High Hardness (Silicon Group)	TiAlN	-	DLC	TiAlN	TiAlN	TiAlN	TiAlN	DG	CrN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Dia Coat	Dia Coat	DLC	TiAlN	Non-Coated
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball / Spherical Ball	Ball	Ball	Ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Tapered neck ball	Ball	Long-Neck Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...