Carbide Ball End Mills（Type：Ball）

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPB220 CBN Super Spiral Ball End Mill

  NS TOOL

  [Features]
  · Spiral ball shape used to improve sharpness of cutting edge.
  · The cutting edge shape used improves the chipping resistance of the cutting edge.
  · When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
  Torsion angle: 20°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.15 ～ 3.6	0.3 ～ 18	4	2	50 ～ 70	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	0.05～-0.05 ～ 5 to -5	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 907.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

  MISUMI

  The cutting performance of aluminum has been improved by the combination of sharp cutting edge and DLC coating

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	14 ～ 68	4 ～ 12	2	50 ～ 110	Aluminum[◎] / Copper[○] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	DLC	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSB, HM Coated 2-Flute Ball

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.03 ～ 6	0.06 ～ 22	-	4 ～ 12	2	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	-0.007～0.007 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,829.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

  NS TOOL

  World's smallest ball end mill "Micro Ball" extends the microfabrication area

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.005 ～ 0.05	0.01 ～ 0.1	-	4	1	45	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,912.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill SBEL

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	5 ～ 80	-	4 ～ 32	2	45 ～ 150	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	0～-50	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 8,379.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL Ball GSXB

  NACHI(FUJIKOSHI)

  [Features]
  · Supports a wide range of materials from raw materials to hardened materials.
  · GSX II coating improves heat and abrasion resistance.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 10	0.6 ～ 30	-	4 ～ 20	2	50 ～ 160	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	-	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,093.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute

  MISUMI

  Diamond coated products that exert tremendous durability are available in the industry's lowest price

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	3 ～ 55	20 ～ 65	4 ～ 12	2	50 ～ 200	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	Dia Coat	Ball

  From: ₹ 5,727.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

  MISUMI

  The regular flute length type is introduced in the low-price and popular XAL balls

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 48	-	4 ～ 16	2	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SFB200 CBN Super Finish Ball End Mill

  NS TOOL

  The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.5 ～ 5	4	2	50 ～ 52	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	0.003～-0.003 ～ 0.005～-0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 19,239.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tipped-blade ball end mill, BE-type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5 ～ 25	30 ～ 80	48 ～ 120	10 ～ 42	2	120 ～ 240	-	-	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 22,072.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model

  MISUMI

  Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Aluminum[○] / Copper[◎] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	CrN	Ball

  From: ₹ 2,252.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model

  MISUMI

  4-flute ball for graphite that achieves high feed

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	4 ～ 24	-	6 ～ 12	4	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	Dia Coat	Ball

  From: ₹ 6,439.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	±0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 10,797.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute for Graphite DG-EBD

  OSG

  End mill with diamond coating dedicated for graphite.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 6	8 ～ 60	-	4 ～ 12	2	80 ～ 200	Aluminum[○] / Graphite[◎] / Resin[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	DG	Ball

  From: ₹ 17,251.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Significantly enhances machining efficiency.
  · The chip discharge capacity is up to 27 times higher (compared to the manufacturer's previous product)
  · With the newly developed ball tip shape, the bottom surface is treated with non-polish processing
  · Reasonable price setting
  · Has 4 flutes but is still cheaper than 3-flute types from other companies

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	3 ～ 18	-	4 ～ 12	4	50 ～ 110	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-0.01～0.01 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,394.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT Coat, 2-flute Ball CSEB

  UNION TOOL

  [Features]
  · With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
  · New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
  · Supports a wide range from copper and raw materials to 55 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  R0.05 ～ R6	0.1 ～ 22	-	4 ～ 12	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: ₹ 1,829.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill ESL-SBE

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 12.5	40 ～ 100	-	6 ～ 25	2	250 ～ 350	-	-	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 32,800.76
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill L S-SBE

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 15	4 ～ 70	-	4 ～ 32	2	140 ～ 250	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	-	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 15,371.20
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Ball End Mill CSBE

  EIKOSHA

  [Features]
  · 2-flute carbide solid ball end mill.
  · For shape machining.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 20	3 ～ 70	-	4 ～ 32	2	45 ～ 180	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 7,570.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Spiral Ball-End Mill SBBE-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  It is possible to increase the depth of cut.
  Machining applications (machining shape): Side surface / curved surface / engraving / R (radius) groove

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 3.5	-	6	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	＋0.005～－0.005	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 14,967.69
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MCD Diamond Tip Ball 2 Flutes

  VAN HOORN

  [Features]
  · The cutting edge is a diamond tip. The tool service life is 2 to 5 times that of PCD and 10 to 20 times that of diamond coated.
  · Ideal for machining graphite and composite materials such as CFRP, etc. Provides a beautiful aluminum finish too.
  · European-made high quality for peace of mind.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  6	12	30	12	2	78	Aluminum[◎] / Graphite[◎] / Resin[○]	-	-	Non-Coated	Ball

  From: ₹ 113,716.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]
  ·General purpose 2-blade ball end mill for wide range of profiling
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 1,260.11
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 2-Flute / Short Type

  MISUMI

  [Features]
  ·Good finish can be expected for surface coarse of workpiece after processing
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 25	15 ～ 75	3 ～ 20	2	40 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / regular model

  MISUMI

  [Features]
  ·3-flute shape is resistant to chattering and enables high feed
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

  MISUMI

  A type for aluminum that achieves high efficiency while having the affordable uncoated design

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	14 ～ 68	4 ～ 12	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-SS-EBD

  OSG

  Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	12 ～ 22	-	5 ～ 11	2	120 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 15,367.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6

  OSG

  Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.16 ～ 3.2	1 ～ 30	6	2	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 12,129.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute GX-EBD-SF

  OSG

  Carbide mushroom type ball end mill developed for shrink fitting.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5 ～ 10	10 ～ 20	-	6 ～ 12	2	32 ～ 58	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 7,297.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-HO-MG-EBD

  OSG

  The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	12 ～ 38	-	6 ～ 20	2	90 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 15,379.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-PC-EBD

  OSG

  [Features]
  · WXL coating with excellent lubrication and wear resistance.
  Can be used with a wide range of work materials and cutting applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.16 ～ 12	1 ～ 80	4 ～ 16	2	45 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.005 to +0.005 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,112.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Ball Type, 2-Flute for Graphite D-GF-LS-EBDR

  OSG

  Diamond coated end mill for graphite machining. Guarantees marvelously extended tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	10 ～ 65	25 ～ 130	4 ～ 12	2	100 ～ 200	Graphite[◎]	-	Curved surface / Side / Engraving / R Groove	Dia Coat	Ball

  From: ₹ 31,853.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball-End Type, 2-Flute For finishing FX-H-EBD

  OSG

  Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 12	2.5 ～ 30	6 ～ 12	2	50 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 9,843.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]

  UNION TOOL

  [Features]
  · An end mill dedicated for graphite machining.
  · Adopts a carbide base material with excellent wear resistance.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.8 ～ 55	-	4 ～ 12	2	60 ～ 200	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	-0.01～0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,461.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)

  NS TOOL

  Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 15	4 ～ 6	2	35 ～ 45	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,121.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

  NS TOOL

  The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.01 ～ 0.05	0.02 ～ 0.1	-	4	1	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 22,997.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Ball End Mill NSBL-2

  NS TOOL

  The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	15 ～ 30	-	6 ～ 12	2	120 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.02～-0.02	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 9,706.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Graphite Solid Ball End Mill 2-Flute, Long Type

  EIKOSHA

  Graphite Electrode Milling, Long Handle

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 15	20 ～ 80	-	4 ～ 25	2	120 ～ 250	Aluminum[◎] / Copper[◎] / Graphite[◎]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 13,675.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]
  · High-accuracy ball end mill coated with WXL hard lubricating film coating.
  Proven performance on a wide range of work materials.
  Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.007 to 0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,011.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Ball End Mill, 4-Flute

  ATOM

  Supports a wide range of applications, from general steel to nonferrous metals and resins. A multi-purpose type with support from rough machining to finish machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	3 ～ 40	-	4 ～ 20	2	40 ～ 105	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 5,768.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Beam bore end mill VN-DBS2 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 4	7 ～ 30	-	4 ～ 8	2	80 ～ 110	Aluminum[◎]	20～-20	Curved surface / R Groove	Non-Coated	Ball

  From: ₹ 84,108.93
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Unequal Lead End Mill RF100VA 6707

  GUHRING

  An uneven lead ball end mill ideal for machining stainless steel.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  -	13 ～ 45	21 ～ 65	6 ～ 25	4	57 ～ 121	-	-	-	Other	Ball

  From: ₹ 5,936.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Graphite Solid Tapered Ball End Mill with 4 Flutes Long Type GBEL4

  EIKOSHA

  [Features]
  · For graphite electrode machining.
  · 4-flute long type.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 15	30 ～ 80	-	6 ～ 25	4	120 ～ 250	Aluminum[◎] / Copper[◎] / Graphite[◎]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 18,020.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Ball End Mill, Center Cut, R216.42

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 8	6 ～ 26	-	6 ～ 16	2	60 ～ 100	Aluminum[○] / Copper[○]	-	Curved surface	Other	Ball

  From: ₹ 8,806.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura General-Purpose Carbide Ball End Mill, 1B230 (Hardness 48 HRC Or Less)

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	3 ～ 32	-	3 ～ 20	2	38 ～ 104	general steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	Curved surface	Other	Ball

  From: ₹ 6,651.78
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	NS TOOL	MISUMI	MISUMI	UNION TOOL	NS TOOL	DIJET	NACHI(FUJIKOSHI)	MISUMI	MISUMI	NS TOOL	DIJET	MISUMI	MISUMI	MISUMI	OSG	UNION TOOL	UNION TOOL	DIJET	DIJET	EIKOSHA	KYOWA SEIKO	VAN HOORN	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	OSG	ATOM	DIJET	GUHRING	EIKOSHA	SANDVIK	SANDVIK
Product Series	SSPB220 CBN Super Spiral Ball End Mill	XAL series carbide ball end mill, 2-flute / short model	DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	HSB, HM Coated 2-Flute Ball	NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining	Solid ball end mill SBEL	GSX MILL Ball GSXB	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute	XAL Series Carbide Ball End Mill, 2-Flute / Regular Model	SFB200 CBN Super Finish Ball End Mill	Tipped-blade ball end mill, BE-type	CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model	CBN Ball End Mill, 2-Flute	Ball End Type, 2-Flute for Graphite DG-EBD	HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]	UT Coat, 2-flute Ball CSEB	Solid ball end mill ESL-SBE	Solid ball end mill L S-SBE	Carbide Solid Ball End Mill CSBE	CBN 2-Flute Spiral Ball-End Mill SBBE-2	MCD Diamond Tip Ball 2 Flutes	XAC series carbide ball end mill, 2-flute / short model	TSC Series Carbide Ball End Mill 2-Flute / Short Type	TSC series carbide ball end mill, 3-flute / regular model	Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	Ball End Type, 2-Flute FX-SS-EBD	Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6	Ball End Type, 2-Flute GX-EBD-SF	Ball End Type, 2-Flute FX-HO-MG-EBD	Ball End Type, 2-Flute WXL-PC-EBD	Long Shank Ball Type, 2-Flute for Graphite D-GF-LS-EBDR	Ball-End Type, 2-Flute For finishing FX-H-EBD	CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]	MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	Long Ball End Mill NSBL-2	Carbide Graphite Solid Ball End Mill 2-Flute, Long Type	Ball End Type, 2-Flute WXL-EBD	Standard Ball End Mill, 4-Flute	Beam bore end mill VN-DBS2 Type	Stainless Steel Unequal Lead End Mill RF100VA 6707	Carbide Graphite Solid Tapered Ball End Mill with 4 Flutes Long Type GBEL4	CoroMill Plura, Ball End Mill, Center Cut, R216.42	CoroMill Plura General-Purpose Carbide Ball End Mill, 1B230 (Hardness 48 HRC Or Less)
From		₹ 907.20		₹ 1,829.96	₹ 5,912.42	₹ 8,379.60	₹ 3,093.96	₹ 5,727.98		₹ 19,239.38	₹ 22,072.22	₹ 2,252.40	₹ 6,439.58	₹ 10,797.96	₹ 17,251.75	₹ 3,394.38	₹ 1,829.96	₹ 32,800.76	₹ 15,371.20	₹ 7,570.91	₹ 14,967.69	₹ 113,716.05	₹ 1,260.11				₹ 15,367.22	₹ 12,129.91	₹ 7,297.36	₹ 15,379.27	₹ 3,112.00	₹ 31,853.82	₹ 9,843.56	₹ 5,461.07	₹ 3,121.13	₹ 22,997.73	₹ 9,706.93	₹ 13,675.75	₹ 3,011.00	₹ 5,768.75	₹ 84,108.93	₹ 5,936.16	₹ 18,020.98	₹ 8,806.87	₹ 6,651.78
Days to Ship	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more
Specifications
R Size(mm)	0.1 ～ 3	0.05 ～ 10	0.5 ～ 6	0.03 ～ 6	0.005 ～ 0.05	0.5 ～ 15	0.2 ～ 10	0.5 ～ 6	0.2 ～ 8	0.1 ～ 1	5 ～ 25	0.5 ～ 6	1 ～ 6	0.3 ～ 1	2 ～ 6	1 ～ 6	R0.05 ～ R6	3 ～ 12.5	1 ～ 15	0.4 ～ 20	0.1 ～ 3	6	0.2 ～ 12.5	0.05 ～ 10	1 ～ 6	0.5 ～ 6	3 ～ 6	0.1 ～ 2	5 ～ 10	3 ～ 10	0.1 ～ 6	1 ～ 6	0.5 ～ 6	0.2 ～ 6	0.1 ～ 3	0.01 ～ 0.05	3 ～ 6	1 ～ 15	0.05 ～ 10	0.5 ～ 10	1 ～ 4	-	1.5 ～ 15	1 ～ 8	0.5 ～ 10
Blade length (ℓ)(mm)	0.15 ～ 3.6	0.2 ～ 38	1.5 ～ 18	0.06 ～ 22	0.01 ～ 0.1	5 ～ 80	0.6 ～ 30	3 ～ 55	1.5 ～ 48	0.15 ～ 1.2	30 ～ 80	1.5 ～ 18	4 ～ 24	0.5 ～ 1.2	8 ～ 60	3 ～ 18	0.1 ～ 22	40 ～ 100	4 ～ 70	3 ～ 70	0.2 ～ 3.5	12	0.8 ～ 50	0.2 ～ 25	5 ～ 22	1.5 ～ 18	12 ～ 22	0.16 ～ 3.2	10 ～ 20	12 ～ 38	0.16 ～ 12	10 ～ 65	1 ～ 12	0.8 ～ 55	0.2 ～ 6	0.02 ～ 0.1	15 ～ 30	20 ～ 80	0.2 ～ 38	3 ～ 40	7 ～ 30	13 ～ 45	30 ～ 80	6 ～ 26	3 ～ 32
Underneck length (ℓ1)(mm)	0.3 ～ 18	-	14 ～ 68	-	-	-	-	20 ～ 65	-	0.5 ～ 5	48 ～ 120	-	-	1.5 ～ 5	-	-	-	-	-	-	-	30	-	15 ～ 75	17 ～ 72	14 ～ 68	-	1 ～ 30	-	-	1 ～ 80	25 ～ 130	2.5 ～ 30	-	0.5 ～ 15	-	-	-	-	-	-	21 ～ 65	-	-	-
Shank diameter (d)(mm)	4	3 ～ 20	4 ～ 12	4 ～ 12	4	4 ～ 32	4 ～ 20	4 ～ 12	4 ～ 16	4	10 ～ 42	4 ～ 12	6 ～ 12	4	4 ～ 12	4 ～ 12	4 ～ 12	6 ～ 25	4 ～ 32	4 ～ 32	6	12	3 ～ 25	3 ～ 20	6 ～ 12	4 ～ 12	5 ～ 11	6	6 ～ 12	6 ～ 20	4 ～ 16	4 ～ 12	6 ～ 12	4 ～ 12	4 ～ 6	4	6 ～ 12	4 ～ 25	4 ～ 20	4 ～ 20	4 ～ 8	6 ～ 25	6 ～ 25	6 ～ 16	3 ～ 20
Number of flutes(sheet)	2	2	2	2	1	2	2	2	2	2	2	2	4	2	2	4	2	2	2	2	2	2	2	2	3	2	2	2	2	2	2	2	2	2	2	1	2	2	2	2	2	4	4	2	2
Overall Length (L)(mm)	50 ～ 70	40 ～ 160	50 ～ 110	50 ～ 110	45	45 ～ 150	50 ～ 160	50 ～ 200	50 ～ 140	50 ～ 52	120 ～ 240	50 ～ 120	50 ～ 80	50	80 ～ 200	50 ～ 110	50 ～ 110	250 ～ 350	140 ～ 250	45 ～ 180	50 ～ 60	78	40 ～ 180	40 ～ 150	50 ～ 110	50 ～ 110	120 ～ 160	50 ～ 100	32 ～ 58	90 ～ 160	45 ～ 160	100 ～ 200	50 ～ 80	60 ～ 200	35 ～ 45	50	120 ～ 180	120 ～ 250	40 ～ 160	40 ～ 105	80 ～ 110	57 ～ 121	120 ～ 250	60 ～ 100	38 ～ 104
work material	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[○] / Graphite[◎] / Resin[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	-	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Graphite[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Graphite[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	Aluminum[◎]	-	Aluminum[◎] / Copper[◎] / Graphite[◎]	Aluminum[○] / Copper[○]	general steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]
R Precision(μm)	0.05～-0.05 ～ 5 to -5	-0.007 ~ +0.003 ～ ±0.01	±0.01	-0.007～0.007 ～ -0.002～0.002	0.002～-0.002	0～-50	-	±0.01	-0.007 ~ +0.003 ～ ±0.01	0.003～-0.003 ～ 0.005～-0.005	-	±0.01	±0.01	±0.005	-0.01～+0.01	-0.01～0.01 ～ -0.005～0.005	-0.007～0.007 ～ -0.005～0.005	-	-	±0.02	＋0.005～－0.005	-	±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	-0.01～+0.01	-0.005～+0.005	-0.01～+0.01	-0.01～+0.01	-0.005 to +0.005 ～ -0.005～+0.005	-	-0.01～+0.01	-0.01～0.01	0.005～-0.005 ～ 0.01～-0.01	-	0.02～-0.02	±0.02	-0.007 to 0.003 ～ ±0.01	±0.01	20～-20	-	±0.02	-	-
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface
Coating	Non-Coated	For General Steels (AlCrN, etc.)	DLC	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	Dia Coat	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	CrN	Dia Coat	Non-Coated	DG	For High Hardness (Silicon Group)	TiCN	Non-Coated	Non-Coated	-	-	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	Dia Coat	TiAlN	Non-Coated	TiAlN	Non-Coated	Non-Coated	-	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	Other	-	Other	Other
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...