Square Connectors

MIXO Modular Insert & Contact

ILME

[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.

Solder/Press Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

[Enclosure]C Type IP66, Rotary Lever Series

ILME

Ilme's traditional lever C type
It is a standard enclosure of Ilme connector.
A uniquely developed rotary lever enables smooth attachment and detachment.
Stainless steel levers and springs ensure safe and secure fitting and airtightness.
The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.
Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.

Han Waterproof E-Model Connector (Screw Connection)

MISUMI

E Model Connector

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Screw Type
• Insertion
• Silver-Plated

CAD ：

2D

MR Straight Hooded Connector

MISUMI

Standard Straight MR Hood

CAD ：

2D

MR Male Connector

MISUMI

High-density MR Male Connector

• For Signal
• Connection between Boards
• PLC
• Solder
• Silver-Plated

CAD ：

2D

MR Series

HONDA TSUSHIN KOGYO

Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.

[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided

Han E / EE Series Connector (Screw Type / Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Screw connection does not require special tools (Models are separated using "-" rather than spaces).

CDA/CDC Common Use Screw Type and Crimp Type 16A / 250V Insert

ILME

CDA/CDC, Common use screw type and crimp type, 16A / 250V, insert

[Features]
・CDA/CDC.
・General-use screw type, crimp type.
▪ 16A / 250V insert

57 Series Soldering/DIP-Type Connector

DDK

A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.

[Features]
■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
· 57-10 type (unit connection plug).
· 57-20 type (unit connection receptacle).
· 57-30 type (plug with straight hood for cables).
· 57-40 type (panel receptacle with locking spring).
· 57-60 type (cable relay receptacle).

Convertible Male/Female D-Sub Connector

MISUMI

[Features]An adapter that converts the male/female D-sub connector or extends the harness. Existing wiring can be effectively used for extension.

• Relay
• For Signal
• Screw Lock

CAD ：

2D

Han-Modular Series Modules【1-2 Pieces Per Package】

HARTING

It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).

Han Series Hood/Housing

HARTING

Han series hood/housing.
[Features]
·Shielded with various locking mechanisms to provide high reliability suitable for industrial use.
·Good material and design have been recognized in the last 10 years.
·Han A and Han B products are standard in the industrial field.
[Applications]
·Ideal for industrial use.

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)

MISUMI

Hood with integrated screw model terminal that allows for repeated connecting with a single driver

• For Signal
• PLC
• EMI Countermeasure
• RS422
• RS232
• Screw Type
• Gold Plated
• Screw Lock

CAD ：

2D

Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-10,000 Pieces Per Package】

HIROSE ELECTRIC

[Features]
· A new type of connector in which IDC terminals are inserted into the case.
· By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.
· Terminals can be replaced after connection, providing excellent maintainability.
· IDC part is protected by the case to provide a high level of reliability.
· No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.
· High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.
· Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.
[Applications]
· Convenient for various types of wiring.
· For all types of OA equipment, including copy machines and printers.

• Volume Discount

D-Sub, D02, D02-M15 Series

JAPANAVIATION

A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.

[Features]
・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
・Interchangeable with different connector types and commonly used accessories.
・The shell joint shape has polarity, fully preventing accidental reverse insertion.
・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

Solder/Press-fit (High-density) D-Sub Connector

MISUMI

High-density D-sub Connector. Allows for high-density wiring without increasing wiring space

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

MR Female Connector

MISUMI

High-density MR female Connector

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• Solder
• Silver-Plated

CAD ：

2D

Han Q Series Connector (Crimp Connection)

HARTING

This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

Han Waterproof A-Model Connector (Screw Connection)

MISUMI

A Model Connector

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Screw Type
• Insertion
• Silver-Plated

CAD ：

2D

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.
[Features]
·Robust and ideal for interfaces due to the metal shell and metal case.
·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.
·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.
·For FCC and other EMI countermeasures.
·Live line connection (3 steps) is also available.
·Ideal for horizontal, parallel and vertical connections.
·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.
[Applications]
·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

D-Sub Connector (Ribbon Cable Insulation Displacement Connection Type) FD Series

HIROSE ELECTRIC

A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.

[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.
· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.
· A connection press can also be used.

Han, Industrial Connector, Insert, Accessory, 70 A / 100 A / 200 A Series

HARTING

Han, Industrial Connector, Insert, Accessory, 70 A / 100 A / 200 A Series

PCR Half Pitch Solder Female Connector

MISUMI

Half-pitch Model PCR Solder Model Connector

• For Signal
• PLC
• EMI Countermeasure
• Solder
• Gold Plated

CAD ：

2D

HE Series, Universal Connector

WEIDMULLER

A 6-pole connector with multiple connection methods (500 V, 24 A, number of poles: 6 (+ PE), screw / spring / crimp / push-in)

PCR Series Case

HONDA TSUSHIN KOGYO

This is a PCR series case.

[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.

Rectangular Miniature Multi-Pin Rack / Panel Crimp Connector, QR/P1 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.

[Features]
· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
· Guide pins are metallic to withstand coupling impact.
· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert

ILME

CK / CKS Small screw type / spring type, 10A / 250 V, Insert

[Features]
・CK/CKS.
・Small screw type / spring type.
▪ 10A/250 V insert

Dedicated PLC D-Sub Connector with Resin Hood

MISUMI

Omron D-sub Hood Recommended By Mitsubishi Q Series

• PLC
• EMI Countermeasure

CD Type, Crimp Type Connector, CD Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).

[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

• Volume Discount

17JE Series Soldering Type Connector

DDK

17 Series (Dsub type) soldering connection type square connector for cable equipment.
[Features]
· Square connector for solder wire connections, with solder cup type contact.
· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
· The hood is metalized plastic, which provides weight reduction and a high shielding effect.
· Either the pin connector or the socket connector can be selected.
· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
[Applications]
· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

CAD ：

2D

2.00-mm Pitch Serial I/O Connector

MOLEX

A Molex 2.0 mm pitch connector for external relay connection.

Han, Insert, Hood/Housing, Accessory for Industrial Connectors

HARTING

Han, insert, hood/housing, accessory for industrial connectors.

Han Waterproof, Q-Model Connector (Weld-Wire Connection)

MISUMI

Waterproof Q-type connector manufactured by HARTING.
Available for numerous applications, high contact density, fast and reliable processing, and available for various termination methods.

• UL
• CSA
• VDE
• For Power Supply
• For Signal
• Waterproof
• Crimp Terminal
• Lever Lock
• Silver-Plated

MIL connector IDC female connector (no lock)

MISUMI

[Features]This is a female connector that allows for batch IDC together with 1.27 mm pitch ribbon cable. It is a lead-free type that takes into consideration the global environment. A standard MIL connector that is compliant with the MIL standard (MIL-C-83503) and UL-certified.

• UL
• MIL
• For Signal
• Connection between Boards
• Solenoid Valve
• PLC
• Pressure Welding
• Gold Plated

[Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert

ILME

New generation lever IL-BRID Series.
[Features]
・ The newly-developed IL-BRID lever is made of stainless steel and has smooth resin.
The manufacturer has adopted the latest design in which these 2 contradictory features are perfectly coordinated.
・ When you operate the lever, the resin part first engages the peg to reduce friction and then slides and is fixed.
・ After that, the stainless steel part is fixed to the peg to ensure a high load capacity.
・ Low friction makes it suitable for frequent insertion and removal applications.

Centronics Solder Spring-lock Connector (Male)

MISUMI

[Features]A Centronics male connector with a lineup of low-priced products. This is a connector that is used for connecting to a panel by attaching cable with solder.

• For Signal
• Connection between Boards
• Printer
• Solder

CAD ：

2D

Centronics Solder Spring-lock Connector (Panel Mountable Female)

MISUMI

[Features]A Centronics connector for fixing with a lineup of low-priced products. A connector that is mounted on a panel and used to connect with a male connector. Cable is connected by soldering.

• For Signal
• Connection between Boards
• Printer

CAD ：

2D

PCR Half Pitch Male Press-fit/Panel Mountable Connector

MISUMI

Half-pitch PCR Panel Mounted Connector

• Pressure Welding
• Gold Plated

CAD ：

2D

1.25-mm Pitch Miniature Crimp Connector (UL Standard Certified Product), DF13 Series【1-10,000 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.

[Features]
· Small.
· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
· Multipole
· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
· Supports automatic mounting.
· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
· Complete basic functionality despite compact form factor.
· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.

In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

• Volume Discount

2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

HIROSE ELECTRIC

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.

[Features]
・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
・Thin type: mount height when used at a right angle: 4.8 mm.
・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
・Further, there are settings available to provide a light feel even if tin plating is used.

2 mm Pitch, Direct-To-Circuit Board Connector, DF4 Series

HIROSE ELECTRIC

Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.

[Features]
・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
・Small type/multi-pin: a wide range of small types with a number of pins.
・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

Han D / DD Series Connector (Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).

Solder Spring-lock Centronics Connector (PCB Male)

MISUMI

[Features]A Centronics connector for low-cost circuit board mounting. A connector that is attached to a circuit board and used to connect with a male connector. Soldering for circuit board mounting.

• For Signal
• Connection between Boards
• Printer

CAD ：

2D