Square Connectors（Page2）

Solder Spring-lock Centronics Connector (PCB Male)

MISUMI

[Features]A Centronics connector for low-cost circuit board mounting. A connector that is attached to a circuit board and used to connect with a male connector. Soldering for circuit board mounting.

• For Signal
• Connection between Boards
• Printer

CAD ：

2D

IEEE1284 Half Pitch EMI Countermeasure Press-fit Male Connector

MISUMI

High-speed Transfer Supporting Pressure Welding Half-pitch I/O Connector

• For Signal
• PLC
• Motor
• EMI Countermeasure
• SCSI
• Pressure Welding
• Gold Plated
• Screw Lock
• One-Touch Lock

CAD ：

2D

MRP Series Housings

HONDA TSUSHIN KOGYO

Housing for the MRP series.

[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided

2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

HIROSE ELECTRIC

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.

[Features]
・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
・Thin type: mount height when used at a right angle: 4.8 mm.
・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
・Further, there are settings available to provide a light feel even if tin plating is used.

Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

HIROSE ELECTRIC

A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.

[Features]
• Metal shell makes it compact and sturdy.
• Connectors can be mounted on the chassis, or on the front or back sides of the panel.
• Height of the wiring side is greatly reduced to facilitate more compact sets.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

DeviceNet Compliant Connector, HR31 Series

HIROSE ELECTRIC

These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.

[Features]
· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
· Snap-lock: The snap-lock feature creates a tactile click when mating.
· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
· Designed to allow for removal by ⌀1 mm pin when improperly wired.
· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

Half-Pitch Multi-Function 2-Piece Connector, FX2 Series

HIROSE ELECTRIC

Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

• Volume Discount

Half Pitch Interface Connector, FI Series

HIROSE ELECTRIC

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.

[Features]
・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

Small, Rectangular Interface Connector, 3200 Series

HIROSE ELECTRIC

This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.

[Features]
• A receptacle connector board implementation surface with a height of the 2.9 mm.
• The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.
• This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.
• This receptacle connector can also be prepared in an embossed packaging product format.
• This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.
• A latch lock is applied to both sides for mating processes.
• This lock is implemented with the minimum space possible, and helps downsize your product set.
• Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.
• The wire connection of this plug connector use a solder attachment type applicable to all types of wires.
• The number of pins available is either 8 or 10.

EMI Countermeasure Solder/Press Contact D-sub Connector

MISUMI

Entire shell has been nickel-plated as an EMI countermeasure, and dimple processed to ensure a firm contact with the partner

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

EMI Countermeasure D-Sub Connector with Metal Hood

MISUMI

[Features]This is a metal hood manufactured by J.S.T. MFG. CO., LTD. (JST). A hood for D-sub connectors, widely used in general. Easy to assemble and robust. The surface of the mild steel hood is nickel plating to maximize the EMI effect when connecting to a shielded cable. The box-like shape completely covers the connection, etc., between the connector and the cable, achieving a high level of shielding effect against noise intrusion. Cable is clamped to a high standard of holding power as the cover nuts that clamp the hood also clamp the cable together.

• Volume Discount

• Space-saving
• EMI Countermeasure

CAD ：

2D

EMI Countermeasure D-sub Connector with Resin Hood (Both Solder/Pressure Welding)

MISUMI

[Features]Hood manufactured by Hirose Electric. The surface of the hood is nickel plating, making it an excellent EMI (electromagnetic interference) countermeasure. A hood that can be attached when connecting a fused cable (round cable with a ribbon cable tip) to an IDC type D-sub connector. Solder-type D-sub connectors (including high-density types) can also be plugged.

• EMI Countermeasure

CAD ：

2D

Press-fit MIL Female Connector for Discrete Wires

MISUMI

Forms a pressure connection with bulk wires. Can be crimped easily with the dedicated tool

• UL
• CSA
• For Signal
• Pressure Welding
• Gold Plated

CAD ：

2D

3M Japan Limited IEEE1284 Half-Pitch Connector, EMI Shielding General-Purpose Plastic Hood

MISUMI

IEEE1284 Solder / Pressure Model Hood

• EMI Countermeasure
• Screw Lock
• One-Touch Lock

MR Series Case

HONDA TSUSHIN KOGYO

Case for the MR series.

[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided

2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC Series

HIROSE ELECTRIC

A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.

[Features]
・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.
・Low profile: pin heads are at a low height of 9.2 mm.
・The space between circuit boards when stacking is 12.2 mm.

3.5‑mm Pitch 2-Row Connector For Small Internal Power Supplies, MDF6 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.

[Features]
· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

• Volume Discount

5 mm Pitch, Connector With Potting Capability For Compact Secondary Power Supply, DF5 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.

[Features]
· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
· Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
· Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
· 8 A current rating: Can carry a maximum current of 8 Amperes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Discrete Wire Press Connector - XG5 (Discrete Wire Press Connector)【1-100 Pieces Per Package】

OMRON

[Features]
・ A solution to the troublesome nature of discrete wire connections has been found.
・A press-fit socket connector for mating with MIL type plugs.
・Uses a 2-slot press-fit structure and insulation barrel to enable reliable and high current (3A) discrete wire press-fit connections.
・The use of a wide range of covers to fit the application allows you to keep saving space on wiring configurations and discrete wires.
・Using the unique, easy locking lever, enables you to lock with an original (XG8B, XG8WL terminals) or box plug (XG4C).
▪ UL standard (File No.E103202) certified products are used as standard (except for XG5S type).

• Volume Discount

C200HX, C200HG, C200HE Series, Connectors

OMRON

C200HX, C200HG, C200HE series, connector.

Slim D-Sub Connector - XM3-LS

OMRON

Slim D sub connector - XM3-LS.

Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. Due to cable connection by screws, it can be easily connected with just a slotted screwdriver without the need for dedicated tools. The screw connection is equipped with a contact. Please confirm the type and male or female before ordering.

• UL
• IP65
• For Power Supply
• For Signal
• Connection between Boards
• Connection in Boards
• Screw Type
• Insertion
• 2DCAD
• Silver-Plated

CAD ：

2D

Solder Spring-lock Centronics Connector (PCB Angle Male)

MISUMI

General-Purpose, Angle, Centronics Connector for PCB Mounting

• For Signal
• Connection between Boards
• Space-saving
• Printer

Han Module Waterproof Connector【2 Pieces Per Package】

MISUMI

Lightweight plastic connector with excellent environmental resistance

D-sub Connector, Crimped Housing

MISUMI

Crimp connection model that makes consistent workmanship quality possible

• Caulking

CAD ：

2D

Solder and Press Contact PLC D-Sub Connector

MISUMI

Used with Mitsubishi Electric Q series which is highly trusted in Japan

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Dsub connector EMI countermeasure product/general-purpose product Resin hood

MISUMI

[Features]A general-purpose resin hood for EMI (electromagnetic interference) countermeasures that achieves low prices. There are 2 types of mounting screws, a short screw type that can be fixed with a screwdriver and a long screw type that can be operated by hand, making it easy to fix. Each has M2.6 [metric thread] and #4-40 [imperial thread], so you can choose according to your application.

CAD ：

2D

FCN Extension Connector

MISUMI

Manufactured by Fujitsu Components. FCN hood for relay only.

• Screw Lock

CAD ：

2D

Centronics Press-fit Spring-lock Connector (Male)

MISUMI

Labor-saving Pressure Welding Spring-lock Male Connector

• For Signal
• Connection in Boards
• Printer
• Pressure Welding
• Gold Plated

CAD ：

2D

IEEE1284 Half Pitch Press-fit/Panel Mountable Female Connector

MISUMI

[Features]A panel-mount half-pitch I/O connector manufactured by Sumitomo 3M. It is mounted on a panel and used to connect with a male connector.

• For Signal
• EMI Countermeasure
• Pressure Welding
• Gold Plated
• One-Touch Lock

CAD ：

2D

PCR Half Pitch Female Press-fit Connector

MISUMI

Half-pitch model PCR Pressure Welding Model Connector

• Pressure Welding
• Gold Plated

CAD ：

2D

Han Waterproof Dual-Lever Base (Panel Mountable)

MISUMI

Pedestal for 2 Lever Model Panel Mounting

• CE-Compliant
• Connection between Boards
• Lever Lock

CAD ：

2D

Han Waterproof Connector Single-Lever Hood (Straight)

MISUMI

Manufactured by HARTING. 1 lever type straight hood.

[About CE mark engraving]
Although our products have been compliant with the CE Low Voltage Directive for some time, starting from March 2020, the CE mark will be engraved in visible locations on the hood housing.
There are no changes related to quality or performance. Since the changeover will take several years, there is a possibility that there will be a mix of old and new items. Please note.

• CE-Compliant
• Lever Lock

Han Waterproof Connector Single-Lever Hood (Angle)

MISUMI

1 Lever-model Angle Hood

• CE-Compliant
• Lever Lock

HDC-KIT-HE Series

WEIDMULLER

The insert, housing and cable entry are provided as a set. HDC-KIT-HE series.

1.27‑mm Pitch Two-Piece Connectors, HIF6 Series

HIROSE ELECTRIC

Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.

[Features]
・Product variation: connection methods include board-to-board model and cable pressure connection.
・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).
・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

[Features]
· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
· Contributing to a high-density board mounting.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

• Volume Discount

HIF3F Series 2.54‑mm Pitch Box Type Pin Header

HIROSE ELECTRIC

This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.

[Features]
▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.
▪ Compatibility: pin header compatible with HIF3B series.

D-Sub Connector Plug Case (Product With EMI Measures), CTH Series

HIROSE ELECTRIC

These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.

[Features]
· Because the lock mechanism is a screw type mechanism it is rugged and reliable.
· Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
· In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
• Use screws to ground the drain wire of the cable with a clamp.
• Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
• For FD*D, however, wire a fused I/O cable when using the case.
• CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.

D-sub Connector Plug Case (Plastic Type), CTF Series

HIROSE ELECTRIC

These are resin cases for D-sub connectors. Screw locks make them sturdy and secure.

[Features]
· Because the lock mechanism is a screw type mechanism, it is rugged and reliable.
• Made of strong ABS resin, so they are lightweight and sturdy.
• The plastic cases are divided at the center part of the cable guiding passage, making them easy to assemble and maintain, and requiring fewer screws.
• Locking brackets are available in either rectangular or hex formats to match the way the panel is mounted.
• 25-contact models are plug cases for modems as defined in JIS-C-6361.
• Easily incorporated using solder (HD type) or crimping (CD type).

Right Angle Type Connector RD*D Series

HIROSE ELECTRIC

These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.

[Features]
· Has a metal shell and so has a small and lightweight connector.
• They are integrated with RD-type molds and are of simple construction.
• They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
• The connection and the board mounting areas are metal plated.
• Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
• A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
• Various accessories can be employed to allow these connectors to be used in different applications.

SUMICON 1600 Series Multi-Contact Rectangular Connector【1-100 Pieces Per Package】

HIROSE ELECTRIC

A rectangular multi-contact connector manufactured using a unique HIROSE design.
[Features]
· Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.
· Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.
· The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.
· These connectors are specified in the NTT specifications, “Spec. No. 1931.”

MX34 Series

JAPANAVIATION

These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.

[Features]
・A small-type/high density connector with abundant variations.
A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.
・Single-row / two-row types are available supporting 3–40 pins.
・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.
・Reliable mating due to mechanical locking structure.
・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.
・Double-layered stop construction to prevent contact removal.
・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.
・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.
・The socket lock is protected by a unique housing structure.
・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.
・High-reliability socket contact
・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.
・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stable connection.
· Crimped type for easy wire connection.

• Volume Discount

2.00-mm Pitch Serial I/O Connector

MOLEX

A Molex 2.0 mm pitch connector for external relay connection.