Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

SGSP2M0.25R

work material Surface Treatment Shank square part K Shank square part Lk Torsion Angle type Nominal Pitch, Number of Threading Chamfer threads Surface Treatment Overall Length (L) shank diameter Ds Class TAP Limit Thread Length l Number of Grooves Flutes Under-head Length Ln Neck diameter dn Days to Ship

Specification/Dimensions

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
Clear
Surface Treatment
- SG (TiCN-based) Coat
Clear
Shank square part K
2.5

3.2

4

4.5

5

5.5

6.5

8.0

10.0

12.0
Clear
Shank square part Lk
5.0

6.0

7

8

9

11.0

13.0

15.0
Clear
Torsion Angle
- 45°
Clear
type
- SGSP
- SGSP□M□RX1.5P
Clear
Nominal
M2

M2.2

M2.3

M2.5

M2.6

M3

M3.5

M4

M4.5

M5

M5.5

M6

M7

M8

M9

M10

M11

M12

M15

M16

M17

M18

M20

M22

M24
Clear
Pitch, Number of Threading(mm)
0.25

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

1

1.25

1.5

1.75

2

2.5

3
Clear
Chamfer threads
1.5

2.5
Clear
Surface Treatment
- TiCN
Clear
Overall Length (L)(mm)
40

42

46

52

60

62

70

72

75

82

90

95

100

105

115

120
Clear
shank diameter Ds(mm)
3

4

5

5.5

6

6.2

7

8

8.5

10.5

12.5

13

14

15

17

19
Clear
Class TAP Limit
- REG P1
- REG P1.5
- REG P2
- ＲＥＧ　Ｐ2
- REG P3
- ＲＥＧ　Ｐ3
- REG P4
- ＲＥＧ　Ｐ4
- REG P5
- ＲＥＧ　Ｐ5
Clear
Thread Length l(mm)
3.5

4.2

4.9

5.3

5.6

6.3

7

8

8.75

8.8

9.5

10.5

12.25

12.3

14

17.5

21
Clear
Number of Grooves Flutes
- 3
- 4
Clear
Under-head Length Ln(mm)
- 15
- 16
- 18
- 20
- 22
- 23
- 24
- 26
- 29.8
- 31.4
- 36.2
- 42.4
- 44.4
- 49.2
- 50.7
- 54
- 59
Clear
Neck diameter dn(mm)
- 2.1
- 2.3
- 2.4
- 2.45
- 2.5
- 2.6
- 2.7
- 2.8
- 3.2
- 3.6
- 4.1
- 4.5
- 4.9
- 5.9
- 6.6
- 6.9
- 7.1
- 7.6
- 7.9
- 8.1
- 8.3
- 8.7
- 8.9
- 9.1
- 9.3
- 9.9
- 10.1
- 10.4
- 10.7
- 10.9
- 11.8
- 12.3
- 12.7
- 12.9
- 13.3
- 13.8
- 13.9
- 14.3
- 14.9
- 15.3
- 15.8
- 15.9
- 16.3
- 16.9
- 17.3
- 17.8
- 18.3
- 18.9
- 19.2
- 19.8
- 20.3
- 20.7
- 20.9
- 21.8
- 22.3
- 22.9
Clear

Days to Ship

All

5 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less
Clear

Specify Alterations

SG Spiral Tap SGSP (SGSP2M0.25R)

Brand :

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

Product Description

[Features]
·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditions

Product TOP

: 30; 45; 60

Part Number
SGSP2M0.25R

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	Nominal	Pitch, Number of Threading (mm)	Chamfer threads	work material	Surface Treatment	Overall Length (L) (mm)	shank diameter Ds (mm)	Class TAP Limit	Thread Length l (mm)	Number of Grooves Flutes	Under-head Length Ln (mm)	Neck diameter dn (mm)	Surface Treatment	Shank square part K	Shank square part Lk	Torsion Angle
	₹ 3,602.73	1 Piece(s)		5 Day(s) or more	M2	0.25	2.5	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	TiCN	40	3	REG P1	8	3	15	2.1	-	-	-	-

Basic Information

Screw Types	Meter	Tool Material Type	Alloy HSS	Tap Type	Spiral Tap
Hole type	For through hole / For blind hole	Coating Y/N	Available

Please check the type/dimensions/specifications of the part SGSP2M0.25R in the SG Spiral Tap SGSP series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Product variants

Part Number
SGSP10M1.5RX1.5P
SGSP10M1R
SGSP10M1RX1.5P
SGSP2M0.4R
SGSP2M0.4RX1.5P
SGSP3.5M0.35R

Standard Unit Price	Minimum order quantity	Days to Ship	Nominal	Pitch, Number of Threading (mm)	Chamfer threads	work material	Surface Treatment	Overall Length (L) (mm)	shank diameter Ds (mm)	Class TAP Limit	Thread Length l (mm)	Number of Grooves Flutes	Under-head Length Ln (mm)	Neck diameter dn (mm)	Surface Treatment	Shank square part K	Shank square part Lk	Torsion Angle
₹ 2,922.33	1 Piece(s)	7 Day(s) or more	-	-	1.5	Aluminum Rolled Material (AL)[◯] / Aluminum Alloy Casting (AC, ADC)[◯] / Copper (Cu)[◯] / Ductile Cast Iron (FCD)[◯] / Quenched and tempered steel (25 to 35 HRC)[◯] / Alloy Steel (SCM)[◯] / Stainless steel (SUS)[◯] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Low-Carbon Steel (carbon alloy less than 0.25%)[◯]	-	-	7	REG P3	10.5	3	31.4	8.3	SG (TiCN-based) Coat	5.5	8	45°
₹ 3,391.11	1 Piece(s)	5 Day(s) or more	-	1	2.5	Aluminum Rolled Material (AL)[◯] / Aluminum Alloy Casting (AC, ADC)[◯] / Copper (Cu)[◯] / Ductile Cast Iron (FCD)[◯] / Quenched and tempered steel (25 to 35 HRC)[◯] / Quenched and tempered steel (35 to 45 HRC)[◯] / Alloy Steel (SCM)[◯] / Stainless steel (SUS)[◯] / Medium carbon steel (carbon content 0.25 to 0.45%)[◯] / High Carbon Steel (C with a content over 0.45%)[◯] / Low-Carbon Steel (carbon alloy less than 0.25%)[◯]	TiCN	-	7	REG P3	10.5	3	31.4	8.9	-	-	-	-
₹ 3,384.42	1 Piece(s)	7 Day(s) or more	-	1	1.5	Aluminum Rolled Material (AL)[◯] / Aluminum Alloy Casting (AC, ADC)[◯] / Copper (Cu)[◯] / Ductile Cast Iron (FCD)[◯] / Quenched and tempered steel (25 to 35 HRC)[◯] / Alloy Steel (SCM)[◯] / Stainless steel (SUS)[◯] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Low-Carbon Steel (carbon alloy less than 0.25%)[◯]	-	-	7	REG P3	10.5	3	31.4	8.9	SG (TiCN-based) Coat	5.5	8	45°
₹ 2,587.47	1 Piece(s)	7 Day(s) or more	M2	0.4	2.5	Aluminum Rolled Material (AL)[◯] / Aluminum Alloy Casting (AC, ADC)[◯] / Copper (Cu)[◯] / Ductile Cast Iron (FCD)[◯] / Quenched and tempered steel (25 to 35 HRC)[◯] / Quenched and tempered steel (35 to 45 HRC)[◯] / Alloy Steel (SCM)[◯] / Stainless steel (SUS)[◯] / Medium carbon steel (carbon content 0.25 to 0.45%)[◯] / High Carbon Steel (C with a content over 0.45%)[◯] / Low-Carbon Steel (carbon alloy less than 0.25%)[◯]	TiCN	40	3	REG P1.5	8	3	15	2.1	-	-	-	-
₹ 2,631.67	1 Piece(s)	7 Day(s) or more	M2	0.4	1.5	Aluminum Rolled Material (AL)[◯] / Aluminum Alloy Casting (AC, ADC)[◯] / Copper (Cu)[◯] / Ductile Cast Iron (FCD)[◯] / Quenched and tempered steel (25 to 35 HRC)[◯] / Alloy Steel (SCM)[◯] / Stainless steel (SUS)[◯] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Low-Carbon Steel (carbon alloy less than 0.25%)[◯]	-	40	3	REG P1.5	8	3	15	2.1	SG (TiCN-based) Coat	2.5	5.0	45°
₹ 2,836.60	1 Piece(s)	5 Day(s) or more	M3.5	0.35	2.5	Aluminum Rolled Material (AL)[◯] / Aluminum Alloy Casting (AC, ADC)[◯] / Copper (Cu)[◯] / Ductile Cast Iron (FCD)[◯] / Quenched and tempered steel (25 to 35 HRC)[◯] / Quenched and tempered steel (35 to 45 HRC)[◯] / Alloy Steel (SCM)[◯] / Stainless steel (SUS)[◯] / Medium carbon steel (carbon content 0.25 to 0.45%)[◯] / High Carbon Steel (C with a content over 0.45%)[◯] / Low-Carbon Steel (carbon alloy less than 0.25%)[◯]	TiCN	-	4	REG P2	4.2	3	18	2.8	-	-	-	-

Search by Category / Brand

Search by Category

How can we improve?