Flat Belt Conveyor, Head Drive, Full Profile

Economical conveyor, with a rational structural design and localized production. A variety of models are available to meet customers' design needs for different usage scenarios, providing better options.
E-SVKA/E-SVKB: This series uses a frame structure with integrated molding, featuring a simple design and easy assembly, resulting in low cost and short delivery time.

■ Flat Belt Width - Pulley Center Distance Correspondence Table

Part number	Belt Width B	Pulley Center Distance L
		L390 to 400	L405 to 500	L505 to 600	L605 to 700	L705 to 800	L805 to 3000
E-SVKA E-SVKB	50	●	●	●	●	●	●
	100	●	●	●	●	●	●
	150	-	-	●	●	●	●
	200	-	-	-	●	●	●
	250	-	-	-	-	-	●

	Part Number	-	B	-	L	-	Motor Selection					-	Belt Specifications	-	Motor Manufacturer Selection	-	Alteration
							Output Power	-	Specifications	-	Gear Head Reduction Ratio
	E-SVKA	-	150	-	1000	-	25	-	SCM	-	25	-	H9	-	G	-	MK

 

Alterations	Code	Spec
Motor Installation Position Reversed	MK	The motor installation position can be changed. Specification MethodMK Only head-driven type can be specified.
Mounting Bracket for Speed Controller	SCB	Includes mounting bracket for speed controller. Specifying method SCB

Please order after selecting part number and parameters according to the selection steps to .

	Part Number	-	B	-	L	-	Motor Selection					-	Belt Specifications	-	Motor Manufacturer Selection
							Output Power	-	Specifications	-	Gear Head Reduction Ratio
Without belt Without motor or gear head	E-SVKA E-SVKA E-SVKA	- - -	150 150 150	- - -	1000 1000 1000	- - -	25 25 25	- - -	SCM INV NM	- - -	25 25 NH	- - -	H9 J H9	- - -	G G R

■Specification Table

Part Number	Shape	Model Features
E-SVKA	Curved Surface Roller Anti-Deviation	The belt has good flatness and high surface accuracy
E-SVKB	Belt with Guide Strip to Prevent Deviation	The belt runs stably without deviation, but there is a slight bulge at the joint of the center guide strip on the flat belt.

 

Part Number	B Selection	L Can be specified down to 5mm increments	Motor Selection			Belt Specifications (Material is generally PU)	Motor
			Output Power (W)	Specifications	Gear Head Reduction Ratio
E-SVKA (Arc Surface Roller Type) E-SVKB (With Guide Bar)	50 100 150 200 250	390 to 3000 (2465)	6 25 40 Note: 6 Not suitable for frequency conversion	SCM (Single-phase 220 V Speed Control Type)	5 7.5 10 12.5 15 18  25 30 36 50 60 75  90 100 120 150 180 Note: When the output power is 6, 5–10 is not applicable	H9 (General Use · Green) W9(General Use · White) U5(For Sliding · Green) S5(For Sliding · White) D9(For Anti-Static · Black) F12(For Food Conveyance · White) O14(Oil Resistant Spec · Green) Q10(For Inclined Use · Green) Y12(General Use · Yellow PVC) V12(General Use · Red PVC) J(No Belt)	G(Taibang Motor) J(Precision Motor)
				INV (Three-phase 220 V Inverter Type)
				NM(No Motor)	NH(No Gear Head)		R(No Motor · Gear Head)

The belt thickness is the nominal thickness; the actual thickness is one-tenth of that, measured in millimeters.
Oil-resistant specification: Only the conveying surface is oil-resistant. If oil gets on the back of the belt, it may become unusable.
If you need automatic control with a stepper or servo motor, you can choose the model without a motor and gear head.
When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.
When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.
For belts other than those listed above, please refer to the specification overview. Click here.
When the selected size L  exceeds  (  ) value, confirmation of shipping days may be required prior to placing an order or requesting a quotation due to transportation constraints.
 

Feature 1: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 2: Light load, edge-wrapped design, suitable for customized freely specified length and width.
Feature 3: Belt width can be specified in units of 50 mm, and pulley spacing can be specified in units of 5 mm.

(1) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(2) Due to different conveyor operating environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(3) Due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting a model.
(4) The motor is available in two voltage specifications: single-phase 220 V and three-phase 220 V. Please select the voltage according to your requirements.
(5) Belt misalignment is a normal phenomenon and is not considered a quality issue. Adjusting for misalignment is part of routine maintenance.
(6) Lateral Deviation Tolerance: The distance between both sides of the roller and the belt is 5±3 mm. During operation, it is not possible to ensure that the belt always stays exactly in the center of the aluminum profile. For deviation adjustment methods, click here.
(7) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)