Flat Belt Conveyor, Center Drive, Pulley Dia. 30mm

Economy series conveyor, with a rational structural design and localized production. A variety of models to meet customers' design needs for different usage scenarios, offering better choices
E-GVFN/E-GVFP: Full belt type. A full belt conveyor means the entire surface of the conveyor can be used as the transport surface.

■ Flat Belt Width - Pulley Center Distance Correspondence Table

Part number	Belt Width B	Pulley Center Distance L
		L355 to 400	L405 to 500	L505 to 600	L605 to 800	L805 to 900	L905 to 2000
E-GVFN E-GVFP	70 to 110	●	●	●	●	●	●
	120 to 160	●	●	●	●	●	●
	170 to 210	-	-	●	●	●	●
	220 to 260	-	-	-	●	●	●
	270 to 300	-	-	-	-	-	●

	Part Number	-	B	-	L	-	Motor Selection					-	Belt Specifications	-	Motor Manufacturer Selection	-	Alterations
							Output Power	-	Specifications	-	Gear Head Reduction Ratio
	E-GVFN	-	200	-	1000	-	25	-	SCM	-	25	-	H9	-	G	-	MP200

 

Alterations	Code	Spec
Drive Unit Position Specification	MP	The drive unit installation position can be changed. Ordering Code MP  155 ≤ MP ≤ L-335 *The minimum value of L is 490 Only the center drive type can be specified.
Mounting Bracket for Speed Controller	SCB	Includes mounting bracket for speed controller. Ordering Code SCB

Please order after selecting part number and parameters according to the selection steps to .

	Part Number	-	B	-	L	-	Motor Selection					-	Belt Specifications	-	Motor Manufacturer Selection
							Output Power	-	Specifications	-	Gear Head Reduction Ratio
Without belt Without motor or gear head	E-GVFN E-GVFN E-GVFN	- - -	200 200 200	- - -	1000 1000 1000	- - -	25 25 25	- - -	SCM INV NM	- - -	25 25 NH	- - -	H9 J H9	- - -	G G R

■Specification Table

Part Number	Shape	Model Features
E-GVFN	Crowned roller for meandering prevention	The belt has good flatness and high surface accuracy
E-GVFP	Belt with meandering prevention crosspieces	The belt runs stably without deviation, but there is a slight bulge at the joint of the center guide strip on the flat belt.

 

Part Number	B can be specified down to 10 mm increments	L Can be specified down to 5mm increments	Motor Selection			Belt Specifications (Material default: PU)	Motor
			Output Power (W)	Specifications	Gear Head Reduction Ratio
E-GVFN (Crowned Roller) E-GVFP (With Meandering Prevention Crosspieces)	70 to 300	355 to 2000	6 25 40 Note: 6 Not suitable for frequency conversion	SCM (Single-phase 220V Variable Speed Motor)	5 7.5 10 12.5 15 18  25 30 36 50 60 75  90 100 120 150 180 Note: When the output power is 6, 5–10 is not applicable	H9(General-purpose · Green) W9(General-purpose · White) U5(For sliding · Green) S5(For sliding · White) D9(For anti-static · Black) F12(For food conveyance · White) O14(Oil-resistant specification · Green) Q10(For incline · Green) Y12(General-purpose · Yellow PVC) V12(General-purpose · Red PVC) J(No belt)	G(GPG Motor) J(JSCC Motor)
				INV (Three-phase 220V Induction Motor)
				NM(No Motor)	NH(No Gear Head)		R(No Motor · Gear Head)

The belt thickness is the nominal thickness; the actual thickness is one-tenth of that, measured in millimeters.
Oil-resistant specification: Only the conveying surface is oil-resistant. If oil gets on the back of the belt, it may become unusable.
If you need automatic control with a stepper or servo motor, you can choose the model without a motor and gear head.
When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.
When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.
For belts other than those listed above, please refer to the specification overview. Click here.
 

Feature 1: The entire conveyor surface can be used as the transport surface.
Feature 2: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 3: Light load, edge-wrapped design, suitable for customized, freely specified length and width.
Feature 4: Belt width can be specified in 10 mm increments, and pulley spacing can be specified in 5 mm increments.

(1) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(2) Due to different conveyor operating environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(3) Due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting a model.
(4) The motor is available in two voltage specifications: single-phase 220 V and three-phase 220 V. Please select the voltage according to your requirements.
(5) Belt misalignment is a normal phenomenon and is not considered a quality issue. Adjusting for misalignment is part of routine maintenance.
(6) Lateral Deviation Tolerance: The distance between both sides of the roller and the belt is 5±3 mm. During operation, it is not possible to ensure that the belt always stays exactly in the center of the aluminum profile. For deviation adjustment methods, click here.
(7) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)