(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Product DetailSpecification/Dimensions
-
type
-
Output Mode
- NPN
- PNP
-
Light Pitch(mm)
- 10mm
- 20mm
- 40mm
-
Detection Height(mm)
-
Total Height(mm)
-
Number of Optical Axes
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 13 Day(s) or Less
Specify Alterations
Area Sensor, General Purpose (E-MBF3SG20-14-P)
Click this image to zoom it.
Move the mouse over or click the image to zoom
You can add up to 6 items per a category to the compare list.
Brand :
MiSUMi Economy
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Starting From :
- 4,222₹/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Overview
• Small appearance, cross-sectional dimensions 35*27mm
• Adopt independent dual-circuit output control method, high safety and reliability
• Short response time, fastest response time <1ms
• Wide voltage power supply DC24±20%
• Strong anti-electromagnetic interference ability, can effectively resist various electromagnetic interference effects of motor equipment
• Adopt line synchronization technology, strong anti-light interference ability
• Easy to install and simple to operate
• Adopt independent dual-circuit output control method, high safety and reliability
• Short response time, fastest response time <1ms
• Wide voltage power supply DC24±20%
• Strong anti-electromagnetic interference ability, can effectively resist various electromagnetic interference effects of motor equipment
• Adopt line synchronization technology, strong anti-light interference ability
• Easy to install and simple to operate
Product Comparison
Compare Old and New area sensor model:| Old E-ARS20-20-N | New E-MBF3SG20-20-N | |
| Sensing height | 380mm | 380mm |
| Sensing distance | 0.1~3m | 0.1~3m |
| Optical axis pitch | 20mm | 20mm |
| Light type | - | Infrared 940nm |
| Lenses | One side | Both side |
| Light beam angle | 15 Degree | 5 Degree |
| Response time | ≤5ms | 2.5ms |
| Supply voltage | DC24V ±10% | DC24V ±20% |
| Output | NPN | NPN |
| Number of output | 1 | 2 |
| Housing protection rating | - | IP54 |
| Electrical protection | Reverse Connection Protection/Output Short Circuit Protection | |
| Operating temperature | - | -10 to 55℃(No condensation) |
| Housing material | Aluminum alloy | Aluminum alloy |
| Anti-light interference | 10000Lux | 10000Lux (angle of incidence I > 5°) |
| Connection cable | Circular Connector 0.2mm2 PVC Length 2.5m | (GX12) × 1 (2pcs) 2.5m at emitter side, 3.5m at receiver side |
| Overall compare | • Economical choice. • Suitable for normal condition • Suitable for short detection distance | • Has lens in both transmitter and receiver • Better external light resistance • Smaller light beam, reduce influence of external reflective surface • Better protection with IP54 |
Dimensional Drawing
（Unit：mm）
| Model | Item Dimension |
| A1 | Upper cover |
| A2 | Lower cover + aviation connector |
| B1 | Upper blind spot |
| B2 | Upper blind spot |
| D | Optical axis pitch |
| H | Protection height of area sensor |
| L | Overall height of area sensor |
When D = 10mm: B1 = 5mm; B2 = 30mm.
When D = 20mm: B1 = 10mm; B2 = 35mm.
When D = 40mm: B1 = 10mm; B2 = 35mm.
L is the overall height of area sensor: L = height of upper and lower covers + upper and lower blind spots + protection height
H is the protection height of area sensor: H = (number of optical axes - 1) × optical axis pitch
Specification Overview
■Specifications and performance
■Output circuit diagram
■Area sensor operating status
Note：○ indicates that an indicator is on, while ● indicates that an indicator is off
| Type | Optical axis pitch (10mm) | Optical axis pitch (20mm) | Optical axis pitch (40mm) |
| Model | E-MBF3SG10 | E-MBF3SG20 | E-MBF3SG40 |
| Item. | |||
| Sensing height | 114~1479mm | ||
| Housing dimensions | 35×27.7mm | ||
| Sensing distance | 0.1~3m | ||
| Optical axis pitch | 10/20/40mm | ||
| Infrared wavelength | 940nm | ||
| Synchronization type | Line synchronization | ||
| Maximum power | ≤5W | ||
| Response time | Response time = (N × 0.1ms) + 0.4ms (N is the number of optical axes) | ||
| Supply voltage | DC24V±20% | ||
| Safety output (OSSD) | PNP transistor output: load current ≤ 200mA, residual voltage ≤ 1V (except for voltage drop caused by cable extension), and leakage current ≤ 1mA; NPN transistor output: load current ≤ 200mA, residual voltage ≤ 1V (except for voltage drop caused by cable extension), and leakage current ≤ 1mA. | ||
| Housing protection rating | IP 54 | ||
| Operating temperature | -10～55℃(No condensation) | ||
| Storage temperature | -20～70℃ | ||
| Relative humidity | 15%～85% | ||
| Housing material | Aluminum alloy | ||
| Anti-light interference | 10000Lux (angle of incidence I > 5°) | ||
| Connection mode | (GX12) × 1 (2pcs) 2.5m at emitter side, 3.5m at receiver side | ||
| NO. | Cable Color | Emitter side | Receiver side | Wiring |
| 1 | Brown | ＋24V | ＋24V | Power Supply＋ |
| 2 | Blue | 0V | 0V | Power Supply－ |
| 3 | Grey | Communication | Communication | Interconnection between emitter and receiver |
| 4 | Black | / | NPN/PNP Output | Load input side 1 |
| 5 | White | / | NPN/PNP Output | Load input side 2 |
| Output mode | Area sensor status | Emitter indicator | Receiver indicator | |
| Green | Green | Red | ||
| NPN NC | Light-ON | ○ | ○ | ● |
| Dark-ON | ○ | ● | ○ | |
| PNP NC | Light-ON | ○ | ○ | ● |
| Dark-ON | ○ | ● | ○ | |
Specification Table
The distance to the hazard source is determined by the minimum detection body and response time of the selected area sensor. A common optical axis spacing of 20 mm (ø25 mm) is typically used. However, for closer distances to the hazard source, an optical axis spacing of 10 mm (ø15 mm) is recommended. Conversely, for longer distances to the hazard source, a cost-effective option is to use an optical axis spacing of 40 mm (ø45 mm).
 Type | - |  Number of optical axes | - |  Output type |
| E-MBF3SG | - | 4 | - | N |
| Part Number | Number of optical axes | Output Type | Protection Height H(mm) | Component size | Overall Length L(mm) | |
| Type |  Optical axis pitch D | H=(－1)× | L=A1+A2+B1+B2+H | |||
| E-MBF3SG | 10 | 8～48 | N(NPN Output)/ P(PNP Output) | 70～470 | A1:14mm,A2:20mm,B1:5mm,B2:30mm | 139～539 |
| 20 | 4～50 | 60～980 | A1:14mm,A2:20mm,B1:10mm,B2:35mm | 139～1059 | ||
| 40 | 4～50 | 120～1960 | A1:14mm,A2:20mm,B1:10mm,B2:35mm | 199～2039 | ||
| Type | Optical axis pitch | Number of optical axes | Output Type | Protection Height (mm) | Overall Length mm） |
| D | H | L | |||
| E-MBF3SG | 10 | 8 | NPN: N PNP: P | 70 | 139 |
| 12 | 110 | 179 | |||
| 16 | 150 | 219 | |||
| 20 | 190 | 259 | |||
| 24 | 230 | 299 | |||
| 28 | 270 | 339 | |||
| 32 | 310 | 379 | |||
| 36 | 350 | 419 | |||
| 40 | 390 | 459 | |||
| 44 | 430 | 499 | |||
| 48 | 470 | 539 | |||
| 20 | 4 | 60 | 139 | ||
| 6 | 100 | 179 | |||
| 8 | 140 | 219 | |||
| 10 | 180 | 259 | |||
| 12 | 220 | 299 | |||
| 14 | 260 | 339 | |||
| 16 | 300 | 379 | |||
| 18 | 340 | 419 | |||
| 20 | 380 | 459 |
| Type | Optical axis pitch | Number of optical axes | Output Type | Protection Height (mm) | Overall Length（mm） |
| D | H | L | |||
| E-MBF3SG | 20 | 22 | NPN: N PNP: P | 420 | 499 |
| 24 | 460 | 539 | |||
| 26 | 500 | 579 | |||
| 28 | 540 | 619 | |||
| 30 | 580 | 659 | |||
| 32 | 620 | 699 | |||
| 34 | 660 | 739 | |||
| 36 | 700 | 779 | |||
| 38 | 740 | 819 | |||
| 40 | 780 | 859 | |||
| 42 | 820 | 899 | |||
| 44 | 860 | 939 | |||
| 46 | 900 | 979 | |||
| 48 | 940 | 1019 | |||
| 50 | 980 | 1059 | |||
| 40 | 4 | 120 | 199 | ||
| 6 | 200 | 279 | |||
| 8 | 280 | 359 | |||
| 10 | 360 | 439 | |||
| 12 | 440 | 519 |
| Type | Optical axis pitch | Number of optical axes | Output Type | Protection Height (mm) | Overall Length（mm） |
| D | H | L | |||
| E-MBF3SG | 40 | 14 | NPN: N PNP: P | 520 | 599 |
| 16 | 600 | 679 | |||
| 18 | 680 | 759 | |||
| 20 | 760 | 839 | |||
| 22 | 840 | 919 | |||
| 24 | 920 | 999 | |||
| 26 | 1000 | 1079 | |||
| 28 | 1080 | 1159 | |||
| 30 | 1160 | 1239 | |||
| 32 | 1240 | 1319 | |||
| 34 | 1320 | 1399 | |||
| 36 | 1400 | 1479 | |||
| 38 | 1480 | 1559 | |||
| 40 | 1560 | 1639 | |||
| 42 | 1640 | 1719 | |||
| 44 | 1720 | 1799 | |||
| 46 | 1800 | 1879 | |||
| 48 | 1880 | 1959 | |||
| 50 | 1960 | 2039 |
Precautions
■About installation 3. Precautions for adjacent installation
When two or more sets of area sensors are installed adjacent to each other, mutual interference is likely to occur between the sensors, as shown in Fig. 3-1, where infrared light from the emitter of product ① may affect the receiver of product ②. This may interfere with the protective function of product ②, putting the operator in danger, so the installation method shown in Figure 3-2 must be followed. That is, in the absence of a light-blocking plate, avoid installing adjacent area sensors on the same side. Otherwise, the light emitted from the emitter can easily fall on another adjacent receiver.
Figure 3-1 Illustration of interference between emitter ① and emitter ②
4. Correct installation position in the presence of reflective objects
If the area sensor is surrounded by any objects with smooth reflective surfaces, such as metal plates, floors, ceilings, machined parts, coverings, baffles, and glass panels, the area sensor must be installed at a distance greater than A (m) from the reflective surfaces, and the value of A can be derived from the formula or found in the coordinate diagram Figure 4-2. As shown in Figure 4-1, the cone has an aperture angle α that is formed between the optical axis and the light beam at the edge of the optical cone. Where α = aperture angle of light beam, L = distance between emitter and receiver, and L < the maximum transmitting distance of area sensor.
4-1 Illustration of interference from reflective object
A (m)＝L×tanα＝L×0.0875(α＝5°)
4-2 Coordinate diagram of installation positions withrespect to impact of reflective objects on area sensor
■ Other precautions of use:
• Please use the product within its specifications. In addition, the function and performance of the product cannot be guaranteed if modified.
• This product is developed and manufactured for use in an industrial environment.
• Do not use the product outdoors.
• When using the product to improve the protection of objects from the hazards around the machine to which it is applied, follow the regulations of the relevant safety authorities of the country or region. For details, please consult the appropriate authorities.
• When applying the product to a specific machine, follow the appropriate use method and safety regulations for installation, operation, and maintenance items. The installation personnel and the personnel in charge of the use of the product shall be responsible for applying the product based on these items.
• Be aware that the product may be damaged if subjected to excessive impact caused by events such as a fall.
• Use the product with consideration for the abnormalities that may occur to the product and with the appropriate safety measures in place to prevent loss.
• Before putting the product into operation, check that its functions.
• Dispose of the product as industrial waste when it is scrapped.
Bracket installation
When two or more sets of area sensors are installed adjacent to each other, mutual interference is likely to occur between the sensors, as shown in Fig. 3-1, where infrared light from the emitter of product ① may affect the receiver of product ②. This may interfere with the protective function of product ②, putting the operator in danger, so the installation method shown in Figure 3-2 must be followed. That is, in the absence of a light-blocking plate, avoid installing adjacent area sensors on the same side. Otherwise, the light emitted from the emitter can easily fall on another adjacent receiver.
Figure 3-1 Illustration of interference between emitter ① and emitter ②
Figure 3-2 Illustration of installation positions for prevention of mutual interference between area sensors
4. Correct installation position in the presence of reflective objects
If the area sensor is surrounded by any objects with smooth reflective surfaces, such as metal plates, floors, ceilings, machined parts, coverings, baffles, and glass panels, the area sensor must be installed at a distance greater than A (m) from the reflective surfaces, and the value of A can be derived from the formula or found in the coordinate diagram Figure 4-2. As shown in Figure 4-1, the cone has an aperture angle α that is formed between the optical axis and the light beam at the edge of the optical cone. Where α = aperture angle of light beam, L = distance between emitter and receiver, and L < the maximum transmitting distance of area sensor.
4-1 Illustration of interference from reflective object
A (m)＝L×tanα＝L×0.0875(α＝5°)
| Protective length L(m) | Allowable installation distance A(m) |
| 0.3 to 2.5m | 0.262m |
4-2 Coordinate diagram of installation positions withrespect to impact of reflective objects on area sensor
■ Other precautions of use:
• Please use the product within its specifications. In addition, the function and performance of the product cannot be guaranteed if modified.
• This product is developed and manufactured for use in an industrial environment.
• Do not use the product outdoors.
• When using the product to improve the protection of objects from the hazards around the machine to which it is applied, follow the regulations of the relevant safety authorities of the country or region. For details, please consult the appropriate authorities.
• When applying the product to a specific machine, follow the appropriate use method and safety regulations for installation, operation, and maintenance items. The installation personnel and the personnel in charge of the use of the product shall be responsible for applying the product based on these items.
• Be aware that the product may be damaged if subjected to excessive impact caused by events such as a fall.
• Use the product with consideration for the abnormalities that may occur to the product and with the appropriate safety measures in place to prevent loss.
• Before putting the product into operation, check that its functions.
• Dispose of the product as industrial waste when it is scrapped.
Example of Use
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.
Loading...
Basic Information
| Detection Distance(mm) | 0.1-3m | Detection Method | Shooting | Response Speed | ≤5ms |
|---|---|---|---|---|---|
| Mounting Thread | M3X6(8PCS) |
Please check the type/dimensions/specifications of the part E-MBF3SG20-14-P in the Area Sensor, General Purpose series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Product variants
| Part Number |
|---|
| E-MBF3SG10-16-P |
| E-MBF3SG10-20-N |
| E-MBF3SG10-20-P |
| E-MBF3SG20-16-N |
| E-MBF3SG20-16-P |
| E-MBF3SG20-18-N |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Output Mode | Light Pitch (mm) | Detection Height (mm) | Total Height (mm) | Number of Optical Axes |
|---|---|---|---|---|---|---|---|---|---|
₹ 10,417.00 | 1 Piece(s) | 13 Day(s) | PNP | 10mm | 150 | 219 | 16 | ||
₹ 11,930.00 | 1 Piece(s) | 13 Day(s) | NPN | 10mm | 190 | 259 | 20 | ||
₹ 11,930.00 | 1 Piece(s) | 13 Day(s) | PNP | 10mm | 190 | 259 | 20 | ||
₹ 9,180.00 | 1 Piece(s) | 13 Day(s) | NPN | 20mm | 300 | 379 | 16 | ||
₹ 9,180.00 | 1 Piece(s) | 13 Day(s) | PNP | 20mm | 300 | 379 | 16 | ||
₹ 11,655.00 | 1 Piece(s) | 13 Day(s) | NPN | 20mm | 340 | 419 | 18 |
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy