Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(2 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-HTPA25S5M100-A-N10

Pulley Shape Shaft Bore Dia. d Shaft Hole Shape Shaft Bore Specs. (Round Hole+Threaded Hole) [P] Shaft Bore Specs. (Round Hole) [H] Shaft Bore Specs. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK] Shaft Bore Specs. (New JIS Keyway Hole+Threaded Hole) [N] C type Belt Width Used Material Surface Treatment Number of Teeth CAD Days to Ship

Specification/Dimensions

Pulley Shape
- Shape A
- Shape B
Clear
Shaft Bore Dia. d(mm)
5

6

6.35

8

10

11

12

12.7

13

14

15

16

17

18

19

20

21

22

23

24

25

26

28

30

32

35

40

42

55

60
Clear
Shaft Hole Shape
- H
- N
- NK
- P
Clear
Shaft Bore Specs. (Round Hole+Threaded Hole) [P](mm)
5

6

6.35

7

8

12.7
Clear
Shaft Bore Specs. (Round Hole) [H](mm)
6.35

12.7
Clear
Shaft Bore Specs. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK](mm)
10
Clear
Shaft Bore Specs. (New JIS Keyway Hole+Threaded Hole) [N](mm)
8

10

11

12

12.7

13

55
[10-20/1mm Unit(s)]
Clear
C(mm)
10

12

15

16

18
Clear
type
- E-HTPA□□S5M
- E-HTPB□□S5M100
- E-HTPB□□S5M150
- E-HTPB□□S5M250
- E-HTPK□□S5M100
- E-HTPK□□S5M150
- E-HTPK□□S5M250
- E-HTPM□□S5M100
- E-HTPM□□S5M150
- E-HTPM□□S5M250
- E-HTPP□□S5M100
- E-HTPP□□S5M150
- E-HTPP□□S5M250
- E-HTPS□□S5M100
- E-HTPS□□S5M150
Clear
Belt Width Used(mm)
10

15

25
Clear
Material
- Steel
  - S45C Equivalent
- Aluminum
  - Aluminum Alloy
- SUS304
Clear
Surface Treatment
- Not Provided
- Black Oxide Coating
- Clear Anodize
- Black Anodize
- Hard Clear Anodize
- Electroless Nickel Plating
Clear
Number of Teeth
14

15

16

18

19

20

22

24

25

26

28

30

32

34

36

40

44

48

50

60

72
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

8 Day(s) or Less

9 Day(s) or Less
Clear

Specify Alterations

Timing Pulleys High Torque/S5M

Volume Discount

Brand :

MiSUMi Economy

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Overview

Usually, timing pulleys and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing

Standard Tooth Profile	Pulley Shape A	Shape B
The tooth groove size varies slightly with the number of teeth (Tooth pitch: 5.0 mm)

Tapped Hole Size Table
(Shaft Bore Specs.: P·N)

dH7 Shaft Bore ID	M (Coarse Thread)	Accessory Fixing Screw
5	M3	M3×3
6~12	M4	M4×3
13~17	M5	M5×4
18~30	M6	M6×5
31~45	M8	M8×6
46~65	M10	M10×8

Shaft Bore Specs.

H Round Hole	P Round Hole + Threaded Hole	N New JIS Keyway + Threaded Hole

Without threaded holes.	The stop threaded hole of Shape A pulley is located near 120° to avoid interference with the threads.	For detailed dimensions of keyway, please refer to Here.

Specifications Overview

Part Number			Material		Surface Treatment
Belt Width 10mm	Belt Width 15mm	Belt Width 25mm	Pulley	Flange
A: 11 W: 16 L: 28	A: 17 W: 22 L: 34	A: 27 W: 32 L: 44	Pulley	Flange
E-HTPA□□S5M100	E-HTPA□□S5M150	E-HTPA□□S5M250	Aluminum Alloy	Aluminum Alloy	Clear Anodized
E-HTPB□□S5M100	E-HTPB□□S5M150	E-HTPB□□S5M250			Black Anodized
E-HTPK□□S5M100	E-HTPK□□S5M150	E-HTPK□□S5M250			Hard Clear Anodize^＊
E-HTPM□□S5M100	E-HTPM□□S5M150	E-HTPM□□S5M250	Equivalent to S45C	SPCC	Black Oxide Coating
E-HTPP□□S5M100	E-HTPP□□S5M150	E-HTPP□□S5M250	Equivalent to S45C	SPCC	Electroless Nickel Plating
E-HTPS□□S5M100	E-HTPS□□S5M150	-	SUS304 Equivalent		-

*Film hardness of hard clear anodize is 300HV~.

The flange is riveted, and set screws are included for shaft bore specs. P, N or C.

If there are requirements for rust prevention, give priority to products made of aluminum alloy, stainless steel SUS304 and with surface treatment of electroless nickel plating.
For anti-rust performance and maintenance of metal materials and surface treatment, please refer to

Specification Table

Part Number			Pulley Shape	Shaft Bore Specs.	Shaft Bore Specs. (1mm increments)						P.D.	O.D.	D	F	E
Part Number					H Round Hole		P Round Hole + Threaded Hole		N Keyway Hole + Tap
Type	Number of Teeth	Type & Nominal Width			d_H7
Type	Number of Teeth	Type & Nominal Width			Shape A	Shape B	Shape A	Shape B	Shape A	Shape B
(Aluminum Alloy) E-HTPA E-HTPB E-HTPK (S45C equivalent) E-HTPM E-HTPP (SUS304 equivalent) E-HTPS	14	S5M100 ＊A ：11 ＊W ：16 ＊L ：28 S5M150 ＊A ：17 ＊W ：22 ＊L ：34 S5M250 ＊A ：27 ＊W ：32 ＊L ：44	A B	H P N	5～12	5~10	5~10	5~8	8・10・NK10	-	22.28	21.32	14	26	16
	15				5～14	5~11	5~10	5~8	8・10・NK10	-	23.87	22.91	15	28	18
	16				5～16	5~13	5~12	5~10	8~12	8	25.46	24.50	17	32	20
	18				6～18	6~15	6~12	6~11	8~12	8・10・NK10	28.65	27.69	19	33	22
	19				6～20	6~15	6~16	6~11	8~16	8・10・NK10	30.24	29.28	19	36	24
	20				6～20	6~15	6~16	6~11	8~16	8・10・NK10	31.83	30.87	19	36	24
	22				7～23	7~20	7~18	7~16	8~18	8~12	35.01	34.05	24	40	27
	24				7～26	7~23	7~20	7~17	8~20	8~13	38.20	37.24	27	45	30
	25				7～26	7~23	7~20	7~17	8~20	8~15	39.79	38.83	27	45	30
	26				8～31	8~27	8~23	8~21	8~22	8~17	41.38	40.42	31	48	35
	28				8～31	8~28	8~24	8~22	8~24	8~18	44.56	43.60	32	48	35
	30				10～32	10~29	10~26	10~23	10~26	10~18	47.75	46.79	33	52	36
	32				10～36	10~33	10~28	10~27	10~28	10~22	50.93	49.97	37	55	40
	34				10～41	10~36	10~33	10~30	10~33	10~25	54.11	53.15	40	61	45
	36				10～41	10~36	10~33	10~30	10~33	10~25	57.30	56.34	40	61	45
	40				10～46	10~43	10~38	10~35	10~38	10~28	63.66	62.70	47	67	50
	44				12～54	12~46	12~42	12~38	12~40	12~32	70.03	69.07	50	74	58
	48				12～59	12~56	12~45	12~45	12~40	12~40	76.39	75.43	60	83	63
	50				12～63	12~59	12~50	12~47	12~43	12~43	79.58	78.62	63	87	67
	60				12～76	12~71	12~50	12~50	12~50	12~50	95.49	94.53	75	99	80
	72				12～85	12~80	12~70	12~70	12~55	12~55	114.59	113.63	90	119	100

The number of teeth for HTPS is limited to values marked with *.

Z-d≥2 for Shaft Bore Specs. V or F.

Q(R)-d≥2 for Shaft Bore Specs. Y.

Shaft Bore Dia. 4.5 and 6.35, if falling within the selection range, can be selected for Shaft Bore Specs. H, P, V and F.

Specify NK10 when New JIS Keyway Hole + Threaded Hole with shaft bore diameter of 10 and keyway width 4.0mm (height 1.8mm) is requested.

NK10, if falling within the selection range, can also be selected for Shaft Bore Specs. N.

Shaft Bore Dia. 8, 9, 11, 13, 14, 17 and 21~55 are not available for Shaft Bore Specs. C.

Shaft Bore Dia. 9 and 51~54 are not available for Shaft Bore Specs. N.

Product Features

Feature 1: S specification timing pulleys, suitable for high torque transmission and conveyance design.
Feature 2: S specification timing pulleys provide great transmission accuracy and efficiency, making them suitable for high-precision transmission and conveyance designs.
Feature 3: S specification timing pulleys can be designed for use in mechanisms with larger shaft spacing, applicable to most mechanisms and equipment.
Feature 4: MISUMI timing pulleys satisfy industrial standards, enabling for a reliable purchase and simple equipment maintenance.
Feature 5: MISUMI timing pulleys are available in various materials and suitable for a wide range of design environments.
Feature 6: MISUMI timing pulleys are made with meticulous attention to detail, allowing customers to make purchases with more confidence.

	①Well processed teeth	→High processing accuracy
	②Threaded hole deburred	→Longer service life of timing belt
	③Evenly press-fitted retainer	→Firm retainer, not easy to fall off
	④Beautiful tooth shape	→Precisely engaged belt, with high concentricity

Usage Method

Usage Method Example Drawing	Usage Method of Timing Wheel and Timing Belt
	①Driving (The driven wheel is driven by the driving wheel for transmission)
	②Linear driving (Reciprocating motion is carried out through the free-end toothed timing belt.)

Usage Method Example Drawing	Usage Method of Timing Wheel and Timing Belt
	③Conveyance (Plates are conveyed by two toothed timing belts)
	④Traction transmission (Workpieces are clamped and transmitted by the belt)

Shape S timing pulleys, suitable for MISUMI standard and economy series S specification belts.

Precautions

For Shaft Bore Specs. P (round hole+threaded hole) or N, the attached set screws are shipped in the same package (may drop in the packaging bag).

There is no threaded hole for Shaft Bore Specs. H (round hole).

There may be no surface treatment in the shaft bore.

For the N keyway hole, the positions of keyway and tooth are not fixed.

Example of Use

Example drawing of a workpiece reversal transfer mechanism designed using MISUMI timing pulley

Equipment Name:
Workpiece Reversal Transfer Mechanism
Purpose:
Rotates the workpiece on the conveyor belt by 90 degrees and transfers it to the next process, using the transmission power of the timing pulley and the timing belt. At this time, the clamping mechanism rotates 180 degrees and does not change the direction of the workpiece relative to the conveying direction at the same time during transfer.
Purpose of Timing Pulley:
The transmission of the timing pulley and the timing belt changes the placement direction of the workpiece while transferring the workpiece. (Applicable to S specification and GT specification timing pulleys)
For detailed information, click

Application Industries

Semiconductor	Automotive	Smart Phones

Medical	Electronic & Electrical	Robotics

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
E-HTPA25S5M100-A-N10
E-HTPA25S5M100-A-N10

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Belt Width Used (mm)	Pulley Shape	Material	Surface Treatment	Shaft Bore Dia. d (mm)	Shaft Hole Shape	Number of Teeth	Shaft Bore Specs. (Round Hole+Threaded Hole) [P] (mm)	Shaft Bore Specs. (Round Hole) [H] (mm)	Shaft Bore Specs. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK] (mm)	Shaft Bore Specs. (New JIS Keyway Hole+Threaded Hole) [N] (mm)	C (mm)
	₹ 14.50	1 Piece(s)	Available	8 Day(s)	-	10	-	[Aluminum] Aluminum Alloy	Clear Anodize	10	N	25	-	-	-	-	-
	-	1 Piece(s)		9 Day(s)	10	10	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	25	-	-	-	10	-

Basic Information

Type	Timing Pulleys	Belt Type	S5M

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Idler	High Torque Toothed Timing Belts S5M	Toothed Timing Belts S2M

Representative model: AHTF20S5M100	Representative model: HTBN500S5M-100	Representative model: C-HTBN500S2M-100

Search by Category / Brand

Search by Category

How can we improve?