Why is there still shaking when positioning with a indexing plunger, is it a product defect?

Hello, first of all, the product itself has a certain tolerance range, allowing a certain amount of shaking. Product defect is only suspected if the shaking exceeds the indicated tolerance. Secondly, since the positioning holes and threaded mounting holes matching the indexing plunger are subject to some machining error, always pay attention when designing.

Why is the rod inside the indexing plunger broken/bent?

Hello, the main stress point of the indexing plunger/indexing pin is the head part of the pin, and the middle internal connecting rod and the tail knob can only be subjected to pulling force, but not to excessive radial force. Please refer to the precautions in the product information. Always move in the axial direction during the pull-out process.

What is the meaning of load min and max?

The min. load represents the initial load, and the max. load represents the load at the maximum press-in limit of ball head.

Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-LPXAS10

type Screw Dia. M Tip Outer Dia. B Stroke (S) Locking Mechanism Body Material Length L Pin Material Pin Surface Treatment Main Body Surface Treatment Accessories CAD Days to Ship

Specification/Dimensions

type
- E-LPXAS
- E-LPXKS
- E-LPXYAS
- E-LPXYKS
- E-LSXPAS
- E-LSXPKS
- E-LSXYAS
- E-LSXYKS
Clear
Screw Dia. M(mm)
10

12

16
Clear
Tip Outer Dia. B(Ø)
5

6

8
Clear
Stroke (S)(mm)
5

6

7

8
Clear
Locking Mechanism
- Nose Lock
  - Self-locking Type
- Returning
  - Reset Type
Clear
Body Material
- Steel
  - Steel
- Stainless Steel
  - Stainless Steel
Clear
Length L(mm)
45

51

54

61

66

75.5
Clear
Pin Material
- S45C
- Stainless Steel
  - Stainless Steel
Clear
Pin Surface Treatment
- Not Provided
- Black Oxide
Clear
Main Body Surface Treatment
- Not Provided
- Black Oxide
Clear
Accessories
- With Locknut
- Without Locknut
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Day(s) or Less
Clear

Specify Alterations

Indexing Plungers Standard, Fine Thread (E-LPXAS10)

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (3 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Overview

Indexing Plungers Standard, Fine Thread
·This series is MISUMI indexing plunger (economy series), which is also called indexing pin, spring draw pin, etc.
·Indexing plunger, also called indexing pin, spring draw pin, etc., is a locating pin that can be inserted and extracted manually.
·Due to the structural characteristics and design purpose of the indexing plunger, the main part under force is the pin head, which can be subjected to shear loads and bending loads.
The internal connecting rod and handle part can only be subjected to tension along the axial direction, not subjected to radial force, i.e., not to be pulled out obliquely, not pressing down and lifting up the handle when pulled out horizontally.

Dimensional Drawing

Specification Table

Indexing Plungers Standard, Fine Thread

Part Number		Thread Pitch (Fine)	B	S	D	L	L1	L2	L3	L4	SW1	SW2	Load (N)
Type	M												Load (N)
Type	M												min.	max.
(Reset type) E-LPXAS E-LPXKS E-LSXPAS E-LSXPKS	10	1	5	5	21	45	17	5	15	5	12	16	8	15
	12	1.5	6	6	25	54	20	6	17	6	14	19	10.5	17
	16	1.5	8	8	31	69	26	8	23	8	19	24	15	23
(Self-locking type) E-LPXYAS E-LPXYKS E-LSXYAS E-LSXYKS	10	l	5	5	21	51	17	5	15	5	12	16	9.5	18.5
	12	1.5	6	6	25	61	20	6	17	6	14	19	11	21.5
	16	1.5	8	7	31	75.5	26	8	23	8	19	24	16.5	30.5

Material Specification

Thread	Type		Knob	Body		Pin			Spring	Nut
	Reset Type	Self-Locking Type	Material	Material	Surface Treatment	Material	Surface Treatment	Hardness	Material	Material	Surface Treatment
Fine Thread	E-LPXAS	E-LPXYAS	PA6 Plastics	1215	Black Oxide	S45C	Black Oxide	45~55HRC	SUS304	-	-
	E-LPXKS	E-LPXYKS								S35C	Black Oxide
	E-LSXPAS	E-LSXYAS		SUS303	-	SUS303	-			-	-
	E-LSXPKS	E-LSXYKS								SUS303	-

Product Features

·The indexing plunger is easy to operate: the tip head protrudes into position and is released by pulling the handle.
·The indexing plunger can be flexibly installed: Suitable for linear motion and rotary motion mechanisms with positioning requirements, the plunger can be installed using general threads, which facilitates assembly and disassembly.Suitable for fixture indexing, positioning, stop limit and other occasions.

Usage Method

How to operate the reset type and self-locking type
•Reset type
1. The front end is usually protruding.
2. The front end retracts when the knob is pulled out.
3. If the knob is released, the front end will return to the protruding state through the action of the built-in spring force.

•Self-locking type
1. The front end is usually protruding.
2. The front end retracts when the knob is pulled out.
3. If the front end is rotated by 90° while maintaining the pull-out state, the retraction state of the front end can be locked.
4. To release the locked state, simply rotate 90° while maintaining the pulled-out state.
5. If the knob is released, the front end will return to the protruding state through the action of the built-in spring force.

: 30; 45; 60

Part Number
E-LPXAS10

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Screw Dia. M (mm)	Tip Outer Dia. B (Ø)	Stroke (S) (mm)	Locking Mechanism	Body Material	Length L (mm)	Pin Material	Pin Surface Treatment	Main Body Surface Treatment	Accessories
	₹ 1,075.00	1 Piece(s)	Available	10 Day(s)	10	10	5	5	[Returning] Reset Type	[Steel] Steel	45	S45C	Black Oxide	Black Oxide	Without Locknut

Basic Information

Type	Standard Type	Mounting Method	Screw-In	Overall Length	Standard
All Stainless	Not Compliant	Tip Heat Treatment	Not Provided	Knob	Provided

Please check the type/dimensions/specifications of the part E-LPXAS10 in the Indexing Plungers Standard, Fine Thread series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Why is there still shaking when positioning with a indexing plunger, is it a product defect?: Answer: Hello, first of all, the product itself has a certain tolerance range, allowing a certain amount of shaking. Product defect is only suspected if the shaking exceeds the indicated tolerance. Secondly, since the positioning holes and threaded mounting holes matching the indexing plunger are subject to some machining error, always pay attention when designing.
Question: Why is the rod inside the indexing plunger broken/bent?: Answer: Hello, the main stress point of the indexing plunger/indexing pin is the head part of the pin, and the middle internal connecting rod and the tail knob can only be subjected to pulling force, but not to excessive radial force. Please refer to the precautions in the product information. Always move in the axial direction during the pull-out process.
Question: What is the meaning of load min and max?: Answer: The min. load represents the initial load, and the max. load represents the load at the maximum press-in limit of ball head.

Product variants

Part Number
E-LPXAS12
E-LPXAS16
E-LPXKS10
E-LPXKS12
E-LPXKS16
E-LPXYAS10

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Screw Dia. M (mm)	Tip Outer Dia. B (Ø)	Stroke (S) (mm)	Locking Mechanism	Body Material	Length L (mm)	Pin Material	Pin Surface Treatment	Main Body Surface Treatment	Accessories
₹ 1,149.00	1 Piece(s)	Available	10 Day(s)	10	12	6	6	[Returning] Reset Type	[Steel] Steel	54	S45C	Black Oxide	Black Oxide	Without Locknut
₹ 1,337.00	1 Piece(s)	Available	10 Day(s)	10	16	8	8	[Returning] Reset Type	[Steel] Steel	66	S45C	Black Oxide	Black Oxide	Without Locknut
₹ 1,091.00	1 Piece(s)	Available	10 Day(s)	10	10	5	5	[Returning] Reset Type	[Steel] Steel	45	S45C	Black Oxide	Black Oxide	With Locknut
₹ 1,169.00	1 Piece(s)	Available	10 Day(s)	10	12	6	6	[Returning] Reset Type	[Steel] Steel	54	S45C	Black Oxide	Black Oxide	With Locknut
₹ 1,378.00	1 Piece(s)	Available	10 Day(s)	10	16	8	8	[Returning] Reset Type	[Steel] Steel	66	S45C	Black Oxide	Black Oxide	With Locknut
₹ 1,138.00	1 Piece(s)	Available	10 Day(s)	10	10	5	5	[Nose Lock] Self-locking Type	[Steel] Steel	51	S45C	Black Oxide	Black Oxide	Without Locknut

Search by Category / Brand

Search by Category

How can we improve?