Is the sensor shipped after installation?

The sensor components are shipped together with the main unit and need to be installed by the customer upon arrival.

Do actuators require regular maintenance?

Daily inspection and maintenance, and regular adding of grease are required, Grease dry-out will cause the product to rust, and dry friction between the guide slider and the steel balls at high speeds will cause wear and tear, significantly reducing product life.

Does the E-MUTB series come with a motor?

The product only includes the body and does not come with a motor or driver. Customers need to choose a brand of motor they trust based on their actual needs.

Can the belt actuator be used vertically?

The E-MUTB European specification belt actuator can be used vertically. When using vertically, please choose a motor with brake. The actuator is not equipped with a reduction mechanism at the factory, so it is recommended to use a motor with reducer. Set the acceleration and deceleration to 0.5 for use.

Please note that the MISUMI India offices and warehouses will remain closed from Oct 31st to Nov 3rd due to the Diwali festival.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(6 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-MUTB80-L200-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-H75-[C,D]

Effective Stroke Motor Position Motor Brand & Power Sensor Position type CAD Days to Ship

Specification/Dimensions

Effective Stroke(mm)
[100-5500/100mm Unit(s)]
Clear
Motor Position
- L Motor On Left Side
- LD Motor On Lower Left Side
- LU Motor On Upper Left Side
- Motor Direct Connection On Left Side
- Motor Direct Connection On Right Side
- R Motor On Right Side
- RD Motor On Lower Right Side
- RU Motor On Upper Right Side
Clear
Motor Brand & Power
M75 Mitsubishi 750W

P75 Panasonic 750W

T75 Delta 750W

Y75 Yaskawa 750W

Z Prepared by Customer
Clear
Sensor Position
- C Motor Side
- D Motor Opposite Side
Clear
type
- E-MUTB80
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

16 Day(s) or Less
Clear

Specify Alterations

Single Axis Robots E-MUTB80, High Speed Belt Drive, Semi-Sealed Type(General Use) (Part Number)

Volume Discount

Check FAQ of this product (4 items)

Brand :

MiSUMi Economy

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

The product does not come with a driver, which must be purchased separately
The product comes with a sensor kit, which is unnecessary to select
Reducer drawing must be shared before placing the order.

Product Description

Economy series Aluminum Alloy Belt Drive Actuators E-MUTB Series product only includes the main unit, not the motor and the driver, which must be purchased separately. The product comes with 3 NPN sensors, for which only mounting direction needs to be selected.

Product Overview of Single Axis Robots

Economy series Single Axis Robots are transmission devices integrating timing belts and guides, which are indispensable for the production process.
Precision up to ±0.1mm.

Dimensional Drawing of Single Axis Robots

Material Specification of Single Axis Robots

Components	Body	Guide	Timing Belt	Timing Pulley	Slide Block	Cover
Material	Aluminum Alloy	Carbon Steel	Rubber	45 Steel	Aluminum Alloy	Aluminum Alloy
Surface Treatment	Anodized	－	－	Nickel Plated	Anodized	Anodized

Specification Overview of Single Axis Robots

Specification Table of Single Axis Robots

Type

Lead (mm)

Stroke
(100millimeters increments)

Motor Position

Motor Brand

Motor Power

Sensor Position

Repetitive Positioning
Accuracy
(mm)

Deceleration Ratio

Max. Payload (kg)

Max. Rotational Speed (mm/sec)

Rated
Thrust (N)

Horizontal Use

Vertical Use

E-MUTB80

200

100~5500

L
(Motor On Left Side)
R
(Motor On Right Side)
LU
(Motor On Upper Left Side)
RU
(Motor On Upper Right Side)
LD
(Motor On Lower Left Side)
RD
(Motor On Lower Right Side)
LT
(Motor Direct Connection On Left Side)
RT
(Motor Direct Connection On Right Side)

M
(Mitsubishi)
P
(Panasonic)
Y
(Yaskawa)
T
(Delta Electronics)
Z
(Prepared by Customer)

75
(750W)

C
(External Motor Side)
D
(External Motor Opposite Side)

±0.1

5:1

200

340

7:1

1428

10:1

100

1000

Only includes the main unit, not the motor, which must be purchased separately.
Single Axis Robots

If the belt breaks during vertical use, there is a risk of the load falling off, so please be careful.
Single Axis Robots

The actuator is not fitted with a reducer, so we recommend using a motor with a reducer.
Single Axis Robots

When selecting motor Z (selected by customer), please inform us of the motor type and, if necessary, provide drawings.
Single Axis Robots

As the drawings are schematic diagrams, please confirm the detailed dimensions according to CAD data.
Single Axis Robots

Motor acceleration & deceleration setting 0.5 sec.

Parameters Use of Single Axis Robots

■ Sensing Line Wiring Diagram

■ List of Recommended Servo Motors
Recommended Motor

■ Single Axis Robots Mounting Port
Motor Mounting Hole

Product Features of Single Axis Robots

1. Single Axis Robots, Allows for vertical use.
2. Single Axis Robots, Precision±0.1mm
3. Single Axis Robots, Full range of supporting accessories
4. Single Axis Robots, Easy maintenance, belt tension adjustable by adjusting the screw’s tightness without disassembly.
5. Single Axis Robots, The addition of roller design to the steel belt makes it less prone to dust contamination.

Precautions of Single Axis Robots

■ Avoid using Single Axis Robots products in the following environments
1. Dusty environment (especially metal powder)
2. Environment with splashing water and oil
3. Near fire sources
4. Environment with excessive organic solutions and salt
5. Environment with direct sunlight and heat radiation
6. Environment subject to strong vibration and shock
7. Environment with corrosive gas, combustible gas

■ Single Axis Robots operating environment
Operating environment: normal temperature (no freezing, non-condensation)

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
E-MUTB80-L200-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-H75-[C,D]
E-MUTB80-L200-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-M75-[C,D]
E-MUTB80-L200-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-P75-[C,D]
E-MUTB80-L200-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-T75-[C,D]
E-MUTB80-L200-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-Y75-[C,D]
E-MUTB80-L200-[100-5500/100]-[L,LD,LT,LU,R,RD,RT,RU]-Z-[C,D]

Price	Minimum Order Qty.	Days to Ship	Effective Stroke (mm)	Motor Position	Motor Brand & Power	Sensor Position
-	1 Piece(s)	16 Day(s)	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	-	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	16 Day(s)	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	M75 Mitsubishi 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	16 Day(s)	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	P75 Panasonic 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	16 Day(s)	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	T75 Delta 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	16 Day(s)	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	Y75 Yaskawa 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	16 Day(s)	100 ～ 5500	L Motor On Left Side / LD Motor On Lower Left Side / LU Motor On Upper Left Side / Motor Direct Connection On Left Side / Motor Direct Connection On Right Side / R Motor On Right Side / RD Motor On Lower Right Side / RU Motor On Upper Right Side	Z Prepared by Customer	C Motor Side / D Motor Opposite Side

Basic Information

Type	Slider	Drive Method	Belt	Main Body, Peripheral Components	Main Body
Positioning Repeatability(µm)	±10	Cable	Not Provided	Number of Tables	1 pc.
Lead	200	Lead	200

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Is the sensor shipped after installation?: Answer: The sensor components are shipped together with the main unit and need to be installed by the customer upon arrival.
Question: Do actuators require regular maintenance?: Answer: Daily inspection and maintenance, and regular adding of grease are required, Grease dry-out will cause the product to rust, and dry friction between the guide slider and the steel balls at high speeds will cause wear and tear, significantly reducing product life.
Question: Does the E-MUTB series come with a motor?: Answer: The product only includes the body and does not come with a motor or driver. Customers need to choose a brand of motor they trust based on their actual needs.
Question: Can the belt actuator be used vertically?: Answer: The E-MUTB European specification belt actuator can be used vertically. When using vertically, please choose a motor with brake. The actuator is not equipped with a reduction mechanism at the factory, so it is recommended to use a motor with reducer. Set the acceleration and deceleration to 0.5 for use.

Check other FAQ (1 items) Hide

Search by Category / Brand

Search by Category

How can we improve?