Stepper Motors 20 Series

MISUMI Stepping Motors 20 Series

* The values in ( ) are reference values.
 

■Stepping Motors Package

Part Number of Stepping Motors	Stepping Motors Model	Step Angle (°)	Body Length (mm)	Number of Leads (pcs)	Current/Phase (A)	Holding Torque (MN·m)	Moment of Inertia (g·cm²)	Stepping Motors Output Current (A)	Stepping Motors Power Voltage (V)	Subdivision
Type
C-20STM01	DR42A (Only when the driver is included)	1.8	33	4	0.6	18	2.9	0.1~2.2	DC: 15～32	200~20000
C-20STM02			38			40	3.3
C-20STM03			45			44	3.8

Individual Stepping Motors can be purchased separately and ordered as C-DR42A.

* The values in ( ) are reference values.

■Package

Part Number	Driver Model	Step Angle (°)	Body Length (mm)	Number of Leads (pcs)	Current/Phase (A)	Holding Torque (MN·m)	Moment of Inertia (g·cm²)	Driver Output Current (A)	Driver Power Voltage (V)	Subdivision
Type
C-20STM01	DR42A (Only when the driver is included)	1.8	33	4	0.6	18	2.9	0.1~2.2	DC: 15～32	200~20000
C-20STM02			38			40	3.3
C-20STM03			45			44	3.8

Individual drives can be purchased separately and ordered as C-DR42A.  

 

Applications of the stepper motor in the medical industry
     

Note
1. The maximum current set by the driver shall not exceed the maximum current of the motor.
2. The subdivision can only adjust the smoothness of rotation, rather than increase the precision.
3. The stepper motor needs to be used with the stepper driver, and cannot be directly connected to the power supply.
4. It is normal if the surface temperature of the stepper motor is between 80~90℃.